Velocity, Inc.

Last updated

Velocity, Inc.
Company type Private company
Industry Aerospace
Founded1984
FounderDanny Maher
Headquarters,
Products Kit aircraft
OwnerSwing family
Number of employees
20
Website www.velocityaircraft.com

Velocity, Inc. is an American kit aircraft manufacturer.

Contents

The company was founded in 1984 by Danny Maher, marketing a four-seat homebuilt aircraft based on the Long-EZ design. The first prototype flew in 1985. The company was sold to Scott and Duane Swing in 1992. In 1995, the cockpit design was changed, adding a gull wing door design. [1]

In 2008, a power failure and crash of a Velocity undergoing initial testing at North Las Vegas Airport brought national attention to homebuilt aircraft testing. Banning of particular aircraft and flight operations at the airport afterward resulted in a power struggle over who has authority over airspace and access to public use airports. [2]

Rocket Racer at Tulsa International Airport, April 2010 Rocketplane.jpg
Rocket Racer at Tulsa International Airport, April 2010

In 2008 Velocity received an order for 20 of its XL-5 aircraft to participate in the Rocket Racing League. [3]

On April 14, 2008, the Racing Rocket Racing Composite Corporation, a subsidiary of the Rocket Racing League, acquired Velocity Aircraft. The RRL announced their goal was to "produce an airframe that will be consistent for all competing Rocket Racers." [4]

On May 26, 2010, Scott and Duane Swing bought back full ownership of Velocity Inc from the Rocket Racing League. [5]

Aircraft

History

Danny Maher designed and built the first Velocity in 1985. First Flight was in October 1985. The plane was debuted at Sun-N-Fun in 1986. Danny's intention was to design a plane that was much like the Long-EZ with a larger, more comfortable interior. [6]

In 1992, Velocity introduced the "173", also known as the long wing. This model had a longer wing, giving it a lower landing speed. The name was a play on the name of a popular model of Cessna, the Cessna 172, the idea being it is one better. Some flying Velocity planes experienced "deep stall" incidents, where the main wing stalled before the canard, causing an unrecoverable stall. After a lengthy investigation, Velocity found and solved the cause of these stalls. The 173 included airfoil modifications that prevented the deep stall. [7] The original kit was also modified to prevent a deep stall, and was now known as the Standard model.

In 1995, Velocity introduced the gull-wing doors, calling the plane the Standard Elite (abbreviated to "SE"). [1]

In 1986, Scott and Duane Swing purchased a Velocity kit. They developed a retractable gear option for it, and began selling it as an add-on. When the Swings purchased Velocity from Danny in 1992, their retractable gear became a factory option to the kit. [1] [8]

In March 1997, Velocity introduced the XL model, which features a larger cabin and space for a larger engine. [9]

The XL-5, sometimes called a "dash five", was introduced in 2004. It reduced the size of the keel down the center of the cabin, giving more room in the back seat. [10]

Velocity has developed a twin-engine model called the Velocity V-Twin. The prototype's first flight was on March 3, 2012, and the model was made available for sale in early 2013. A video is available on the official website. [11]

Current models

Aircraft produced [12]
Model nameFirst flightNumber builtType
Velocity SE 268Canard homebuilt
Velocity XL 190Large fuselage canard homebuilt
Velocity XL5865-seat canard homebuilt
Velocity TXL 18Turbocharged canard homebuilt
Velocity V-Twin 274-5 seat twin engine canard homebuilt
Velocity Turbo 16-place prototype canard turboprop

Related Research Articles

<span class="mw-page-title-main">Lancair</span> American manufacturer of aviation aircraft kits

Lancair International, Inc. is a U.S. manufacturer of general aviation aircraft kits. They are well known for their series of high-performance single-engine aircraft that offer cruise speeds that surpass many twin-engine turboprop designs. Along with the Glasair series, the early Lancair designs were among the first kitplanes to bring modern molded composites construction to light aircraft.

<span class="mw-page-title-main">Rutan Long-EZ</span> Homebuilt aircraft with canard layout

The Rutan Model 61 Long-EZ is a tandem 2-seater homebuilt aircraft designed by Burt Rutan's Rutan Aircraft Factory. The Long-EZ has a canard layout, a swept wing with wingtip rudders, and a pusher engine and propeller. The tricycle landing gear has fixed main wheels with streamlined spats and a retractable nosewheel. Its predecessor was the VariEze, plans for which were first available to homebuilders in 1976. The prototype Long-EZ, N79RA, first flew on June 12, 1979.

<span class="mw-page-title-main">Homebuilt aircraft</span> Aircraft constructed by amateurs

Homebuilt aircraft, also known as amateur-built aircraft or kit planes, are constructed by persons for whom this is not a professional activity. These aircraft may be constructed from "scratch", from plans, or from assembly kits.

<span class="mw-page-title-main">Thorp T-18</span> American homebuilt aircraft

The Thorp T-18 is an American, two-place, all-metal, plans-built, homebuilt aircraft designed in 1963 by John Thorp.

<span class="mw-page-title-main">Quikkit Glass Goose</span> Two-seat biplane amphibious kit aircraft

The Quikkit Glass Goose is an American two-seat biplane amphibious aircraft, designed by Tom Scott and marketed for homebuilding by Quikkit of Dallas, Texas.

<span class="mw-page-title-main">Rocket Racing League</span> Former air racing league

The Rocket Racing League was a racing league that planned to use rocket-powered aircraft to race a closed-circuit air racetrack. Founded in 2005, the league made its first public flights in 2010 and was working to begin regular racing seasons. The "Rocket Racers" were slated to compete in the air and on a virtual racetrack easily viewed by a live audience as well as projected on large screen and handheld electronic displays.

<span class="mw-page-title-main">Lancair IV</span> American homebuilt aircraft

The Lancair IV and IV-P are a family of four-seat, low-wing, retractable-gear, composite monoplanes powered by a 550-cubic-inch (9,000 cm3) Continental TSIO-550 twin-turbocharged piston engine.

<span class="mw-page-title-main">Cozy MK IV</span> Light aircraft in the US

The Cozy Mark IV is a 4-seat, single engine, homebuilt light aircraft designed by Nat Puffer, with parts and plans supplied by Aircraft Spruce & Specialty Co. The aircraft is built from plans using basic raw materials. It is not a kit aircraft, though many small parts are available prefabricated. The Cozy is similar in design and construction to the 2-seat Rutan Long-EZ, from which it is derived, with approval from Burt Rutan.

<span class="mw-page-title-main">Berkut 360</span>

The Berkut 360 is a tandem-seating, two-seat homebuilt canard aircraft with pusher configuration and retractable landing gear, built primarily of carbon fiber and fiberglass.

<span class="mw-page-title-main">Velocity SE</span>

The Velocity Model 173 SE (Standard Elite) is an entry-level canard pusher aircraft from Velocity Aircraft. The four seat, rear engine aircraft may be powered by a 160 hp (120 kW) Lycoming IO-320 or a 200 hp (150 kW) Lycoming IO-360 engine.

<span class="mw-page-title-main">Velocity XL</span> American amateur-built aircraft

The Velocity XL is an American amateur-built aircraft, produced by Velocity, Inc. It is an enlarged version of their Velocity SE canard pusher design.

<span class="mw-page-title-main">Van's Aircraft RV-10</span> American kit aircraft

The Van's Aircraft RV-10 is a four-seat, single-engine, low-wing homebuilt airplane sold in kit form by Van's Aircraft. It is the first four-seat airplane in the popular RV series. The RV-10 first flew on 29 May 2003, and the first kit parts were delivered to a customer in September 2003.

Comp Air Inc, formerly known as Aerocomp Inc, is an aircraft manufacturer based in Merritt Island, Florida, owned by Ron Lueck.

<span class="mw-page-title-main">Bede BD-4</span>

The Bede BD-4 is an American light aircraft, designed by Jim Bede for homebuilding and available since 1968. It was one of the first homebuilt aircraft to be offered in kit form. It remains one of the world's most popular homebuilts with thousands of plans sold and hundreds of examples completed to date.

<span class="mw-page-title-main">Lockwood Aircam</span> American kit aircraft

The Lockwood Aircam is a high-wing, twin engine pusher configuration aircraft with conventional landing gear, based on the single engine Lockwood Drifter and sold in kit form by Lockwood Aircraft. The open-cockpit aircraft seats two in tandem. As of 2019, 250 Aircams were licensed and flying. In 2019, a complete kit with Rotax 912ULS engines, less instruments, paint, shipping and crating was priced at US$128,990.

<span class="mw-page-title-main">Blue Yonder EZ Flyer</span> Canadian ultralight aircraft

The Blue Yonder EZ Flyer is a Canadian-designed-and-built, tandem two-seat, open cockpit, pusher configuration, recreational and training aircraft provided as a completed aircraft or in kit form by Blue Yonder Aviation.

<span class="mw-page-title-main">SlipStream Genesis</span> Type of aircraft

The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.

<span class="mw-page-title-main">Velocity V-Twin</span> Type of aircraft

The Velocity V-Twin is an American twin engined, homebuilt aircraft, designed by Velocity Aircraft and following the layout of their earlier Velocity XL but with a single vertical tail. It is the flagship model of the Velocity Aircraft Line.

<span class="mw-page-title-main">St-Just Super-Cyclone</span> Canadian amateur-built aircraft

The St-Just Super-Cyclone is a Canadian amateur-built aircraft that was at one time produced by St-Just Aviation of Boucherville, Quebec. By 2023 production had passed to Bushliner Aircraft Manufacturing of Granite Falls, Washington who were building it as the Bushliner 1850EX. The aircraft is supplied as plans or as a kit for amateur construction.

<span class="mw-page-title-main">AeroCad AeroCanard</span> Type of aircraft

The AeroCad AeroCanard is a family of American amateur-built aircraft, designed and produced by AeroCad of Florissant, Missouri. The aircraft is supplied as a kit for amateur construction.

References

  1. 1 2 3 Velocity 173 Elite, Kitplanes Magazine, December 1995, vol. 12, issue 12, pp. 6.
  2. KEITH ROGERS (23 August 2008). "Federal rules govern home-built aircraft FAA officials must certify airworthiness". Las Vegas Review Journal.
  3. Velocity Aircraft Receives Purchase Order For 20 Velocity XL-5's, Space Fellowship , 2008-10-08, accessed 2010-12-11.
  4. Rocket Racing Composite Corp. Acquires Velocity Aircraft, Parabolic Arc, 2008-04-14, accessed 2010-12-05.
  5. Swing Family Repurchase of Velocity Inc. from Rocket Racing League, Velocity Aircraft Listserve, text copy from tvbf.org archives, 2010-05-26. "For those of you wondering just what influence Rocket Racing has with Velocity, let me assure you that they have none. As I write this, the sole ownership of Velocity Inc. is now totally and completely in the hands of Scott Swing and myself. Through a stock exchange, Scott and I returned our Rocket Racing stock for 100% return of the stock they held in Velocity Inc. Rocket Racing now has 0% ownership in this company. ... Scott and Duane Swing"
  6. Velocity, Sport Aviation, April 1986, pp.40
  7. Solving a Deep Stall Riddle, Sport Aviation, July 1987, pp. 20
  8. Shop Fire, Sport Aviation, April 1989
  9. Around the Patch, Kitplanes Magazine, October 1997
  10. The SpaceMaker: Velocity's Dash 5, Kitplanes Magazine, December 2004, pp.5 .
  11. Insite. "Velocity Aircraft". Velocity Aircraft. Retrieved 20 November 2012.
  12. Annual Buyer's Guide, Kitplanes Magazine, December 2010, vol. 27, issue 12, pp. 33, Retrieved 2010-12-06.