The Water Clock | |
---|---|
![]() The Water Clock inside The Children's Museum of Indianapolis | |
Material | Glass, steel, and a solution of deionized water, methyl alcohol, and coloring dye |
Size | Approx. 30 ft. |
Created | Bernard Gitton, 1988, France |
Present location | The Children's Museum of Indianapolis |
Identification | 88.191.1 |
The Water Clock, also known as The Giant Water Clock, is in the permanent collection of The Children's Museum of Indianapolis located in Indianapolis, Indiana, United States. The modern water clock is located in the Sunburst Atrium of The Children's Museum, and is adjacent to the Grand Staircase leading up to the second floor. [1] It was created by French scientist and artist Bernard Gitton in 1988, the same year that the museum acquired it. [2]
The 26.5-foot (8.1 m) artistic timepiece is the largest water clock in North America. [3]
The water clock, created by French chemist and artist Bernard Gitton, is approximately 30 feet (9.1 m) tall and made of more than 40 pieces of glass and 100 pieces of metal. [2] The lights on the clock are bright green and the water is dyed blue. The clock is made of glass, steel, and 70 US gallons (260 L) of a solution of deionized water, methyl alcohol, and coloring dye.
It was assembled in France to ensure that it worked, then disassembled and shipped to Indianapolis. It was assembled again in the Children's Museum over two weeks time. [1]
Functionally, a Gitton water clock consists of four subsystems: An oscillator (the pendulum), a frequency divider, a minute counter (the minute discs), and an hour counter (the hour balls). [2] Water from a pump in the basement, just below the clock, is pumped through a pipe running up the middle of the clock into a reservoir at the top. The water then drips down onto a scoop at the top which is connected to the green, swinging pendulum. The pendulum causes the scoop to dump the water into a series of siphons. The siphons fill and empty into the minutes' globes. A Siphon is a tube in an inverted "U" shape which causes the solution to flow up, without pumps, powered by the fall of the liquid as it flows down the tube under the pull of gravity. One minute globe represents two minutes. When all thirty-minute globes are full, they empty and an additional hour globe fills. Twice a day, at one o'clock, all of the hour globes and minute discs are full and the water empties until only the first hour globe is left full. [4]
To read the clock the viewer finds the number of filled "hour" spheres lining the left side of the clock and the number of filled discs on the "minutes" side of the clock, with each disc equaling two minutes.
Moving water makes a siphon -\ You will not see it pull \ 'Til it reaches to the minutes' sphere \ And makes the water flow.
At every single hour \ When the minutes' side is full \ The "minutes matching" U-tube burps: \ Another siphon pulls.— Mark Coovert and Peggy Powis, interpretive poem, [5]
The water clock has two pumps in the basement – one that keeps the clock working, and a backup in case the first fails. The 70 US gallons (260 L) of fluid in the clock is not pure water. It is composed of deionized water (to keep it electrically non-conductive), coloring (to make the water easier to see), and methyl alcohol (to keep bacteria from growing in the clock). [1] The color of the water can be changed by stopping the clock, draining the water, and replacing it with water of the new color.
The water clock was created by Bernard Gitton, a French physical chemist and artist who combines those two studies by creating water clocks, water calculators, fountains, and other items of art and science. Bernard began making items of artistic science in 1979, at the age of 43, when he left the world of research science to create scientific art. [2]
A pendulum clock is a clock that uses a pendulum, a swinging weight, as its timekeeping element. The advantage of a pendulum for timekeeping is that it is an approximate harmonic oscillator: It swings back and forth in a precise time interval dependent on its length, and resists swinging at other rates. From its invention in 1656 by Christiaan Huygens, inspired by Galileo Galilei, until the 1930s, the pendulum clock was the world's most precise timekeeper, accounting for its widespread use. Throughout the 18th and 19th centuries, pendulum clocks in homes, factories, offices, and railroad stations served as primary time standards for scheduling daily life, work shifts, and public transportation. Their greater accuracy allowed for the faster pace of life which was necessary for the Industrial Revolution. The home pendulum clock was replaced by less-expensive synchronous electric clocks in the 1930s and '40s. Pendulum clocks are now kept mostly for their decorative and antique value.
The second is the unit of time in the International System of Units (SI), historically defined as 1⁄86400 of a day – this factor derived from the division of the day first into 24 hours, then to 60 minutes and finally to 60 seconds each. "Minute" comes from the Latin pars minuta prima, meaning "first small part", and "second" comes from the pars minuta secunda, "second small part".
A flush toilet is a toilet that disposes of human waste by using the force of water to flush it through a drainpipe to another location for treatment, either nearby or at a communal facility, thus maintaining a separation between humans and their waste. Flush toilets can be designed for sitting or squatting, in the case of squat toilets. Most modern sewage treatment systems are also designed to process specially designed toilet paper. The opposite of a flush toilet is a dry toilet, which uses no water for flushing.
A water clock or clepsydra is a timepiece by which time is measured by the regulated flow of liquid into or out from a vessel, and where the amount of liquid can then be measured.
A siphon is any of a wide variety of devices that involve the flow of liquids through tubes. In a narrower sense, the word refers particularly to a tube in an inverted "U" shape, which causes a liquid to flow upward, above the surface of a reservoir, with no pump, but powered by the fall of the liquid as it flows down the tube under the pull of gravity, then discharging at a level lower than the surface of the reservoir from which it came.
A clock face is the part of an analog clock that displays time through the use of a flat dial with reference marks, and revolving pointers turning on concentric shafts at the center, called hands. In its most basic, globally recognized form, the periphery of the dial is numbered 1 through 12 indicating the hours in a 12-hour cycle, and a short hour hand makes two revolutions in a day. A long minute hand makes one revolution every hour. The face may also include a second hand, which makes one revolution per minute. The term is less commonly used for the time display on digital clocks and watches.
A water dispenser, known as water cooler, is a machine that dispenses and often also cools or heats up water with a refrigeration unit. It is commonly located near the restroom due to closer access to plumbing. A drain line is also provided from the water cooler into the sewer system.
A grandfather clock is a tall, freestanding, weight-driven pendulum clock, with the pendulum held inside the tower or waist of the case. Clocks of this style are commonly 1.8–2.4 metres (6–8 feet) tall with an enclosed pendulum and weights, suspended by either cables or chains, which have to be occasionally calibrated to keep the proper time. The case often features elaborately carved ornamentation on the hood, which surrounds and frames the dial, or clock face.
The vergeescapement is the earliest known type of mechanical escapement, the mechanism in a mechanical clock that controls its rate by allowing the gear train to advance at regular intervals or 'ticks'. Verge escapements were used from the late 13th century until the mid 19th century in clocks and pocketwatches. The name verge comes from the Latin virga, meaning stick or rod.
A reef aquarium or reef tank is a marine aquarium that prominently displays live corals and other marine invertebrates as well as fish that play a role in maintaining the tropical coral reef environment. A reef aquarium requires appropriately intense lighting, turbulent water movement, and more stable water chemistry than fish-only marine aquaria, and careful consideration is given to which reef animals are appropriate and compatible with each other.
A draft is the use of suction to move a liquid such as water from a vessel or body of water below the intake of a suction pump. A rural fire department or farmer might draft water from a pond as the first step in moving the water elsewhere. A suction pump creates a partial vacuum and the atmospheric pressure on the water's surface forces the water into the pump, usually via a rigid pipe or a semi-rigid hard suction hose.
John Whitehurst FRS, born in Cheshire, England, was a clockmaker and scientist, and made significant early contributions to geology. He was an influential member of the Lunar Society.
A turret clock or tower clock is a clock designed to be mounted high in the wall of a building, usually in a clock tower, in public buildings such as churches, university buildings, and town halls. As a public amenity to enable the community to tell the time, it has a large face visible from far away, and often a striking mechanism which rings bells upon the hours.
The elephant clock was a model of water clock invented by the medieval Islamic engineer Ismail al-Jazari (1136–1206). Its design was detailed in his book, The Book of Knowledge of Ingenious Mechanical Devices.
The history of timekeeping devices dates back to when ancient civilizations first observed astronomical bodies as they moved across the sky. Devices and methods for keeping time have gradually improved through a series of new inventions, starting with measuring time by continuous processes, such as the flow of liquid in water clocks, to mechanical clocks, and eventually repetitive, oscillatory processes, such as the swing of pendulums. Oscillating timekeepers are used in modern timepieces.
In horology, a wheel train is the gear train of a mechanical watch or clock. Although the term is used for other types of gear trains, the long history of mechanical timepieces has created a traditional terminology for their gear trains which is not used in other applications of gears.
The Hornsby Water Clock, titled Man, Time and the Environment is a piece of kinetic sculpture, a decorative fountain and a functional clock in the Florence Street pedestrian mall in Hornsby, New South Wales, Australia. Unveiled in 1993, the sculpture was designed and engineered by Victor Cusack and constructed of bronze, stainless steel and glass by Victor and his foundry floor manager Rex Feakes. Construction, including alterations to the mall, cost over A$1 million and took two and half years; thereafter, chicken bones and other carelessly discarded items caused many breakdowns before the water filtration system was upgraded.
A marine sandglass is a timepiece of simple design that is a relative of the common hourglass, a marine (nautical) instrument known since the 14th century. Sandglasses were used to measure the time at sea or on a given navigational course, in repeated measures of small time increments. Used together with the chip log, smaller marine sandglasses were also used to measure the boat speed through the water in knots.
A gasoline pump or fuel dispenser is a machine at a filling station that is used to pump gasoline (petrol), diesel, or other types of liquid fuel into vehicles. Gasoline pumps are also known as bowsers or petrol bowsers, petrol pumps, or gas pumps.
Bernard Gitton ; born 24 June 1935) is a French physicist and artist who has built modern water clocks, fountains and other devices relating art and science.
{{cite book}}
: |work=
ignored (help)