This article has multiple issues. Please help improve it or discuss these issues on the talk page . (Learn how and when to remove these template messages)
|
Weighted clothing are garments that have heavy materials incorporated into them, to add weight to various parts of the body, usually as part of resistance training. The effect is achieved through attaching weighted pieces to the body (or to other garments) which leave the hands free to grasp objects. Unlike with held weights or machines, weighted clothing can leave users more able to do a variety of movements and manual labour. In some cases certain weighted clothing can be worn under normal clothing, to disguise its use to allow exercise in casual environments.
The use of weighted clothing is a form of resistance training, generally a kind of weight training. In addition to the greater effect of gravity on the person, it also adds resistance during ballistic movements, due to more force needed to overcome the inertia of heavier masses, as well as a greater momentum that needs deceleration at the end of the movement to avoid injury. The method may increase muscle mass or lose weight; however, there have been concerns about the safety of some uses of weights, such as wrist and ankle weights.
It is normally done in the form of small weights, attached to increase endurance when performed in long repetitive events, such as running, swimming, punching, kicking or jumping. Heavier weighted clothing can also be used for slow, controlled movements, and as a way to add resistance to body-weight exercises.
Sometimes, weights are draped over or tied to the neck. As weighted vests often have weight placed here, they effectively have the same benefits. Advantages to neck weights and more upper-body-centric weighted vests is that they allow easier spinal flexion (contracting abdominals or stretching extensor spinae) and extension (contracting extensor spinae, stretching abdominals). This makes them prime for adding resistance to these movements, and takes out the requirement of using the arms to anchor weight to the upper body to add resistance.
The purpose of using a weight vest is to add extra weight for body-weight exercises and to create an overload effect for walking, distance running or speed, agility and quickness (SAQ) drills. Research demonstrates that using an overload during sprinting or speed drills requires lower-body muscles to generate more force against the ground which could lead to gains in strength and power and ultimately faster acceleration during running. Weight vests are used by athletes to increase strength and efficiency during speed, power and agility drills; producing a unique training effect that is unavailable with traditional free weight training equipment. They can also be used by casual walkers or runners. [1]
Weight vests are becoming a very popular form of adding weight around the entire core to, for the most part, simulate the fat storage areas of the human body. [2] It is very useful for adding weight to limb-centric movements, and for handling great weights. Due to the large area available, it can also handle more weight. [3] If well-affixed, it is the safest most natural means of mimicking added body mass without unbalancing the body's muscles. They can be used to add resistance to almost any whole-body movement. A study has shown that using a weighted vest can increase the metabolic costs, relative exercise intensity, and loading of the skeletal system during walking. [4]
One problem with some weighted vests is that due to tightness in the shoulder girdle, in movements like pull-ups or high range of motion pushups, the vest can be shearing, either damaging the person or in some cases, the vest itself being slowly torn away. This can also be seen as an advantage, however, in those who wish to limit their range of motion due to lack of strength or flexibility, to avoid injury. The limitations of front and back bending of the core is for example, contrasted by ergonomic construction to encourage good posture in modern weighted vests such as the x-vest, hyper vest or game-breakers pro suit.
Another problem with some weighted vests is the constriction of breathing and overheating due to the use of heavy, non-breathing materials such as nylon and neoprene. The latest developments in weighted vest products offer comfortable weight vests with cool wicking fabric that allow full range and direction of movement, chest expansion for breathing, open sides connected with lacing, and low profile design allowing a vest to be worn under clothing or football pads, unlike traditional vests made of nylon or neoprene.
Using weighted backpacks is a very common form of weight. It is like clothing when properly affixed, although some backpacks require tension in the pectorals or being held on the arms to keep from sliding off if not properly affixed.
Simpler to put on and remove than weighted vests, it simulates how humans carry things, like young or injured comrades or camping supplies, rather than the storage of body fat. For most exercises, like pull-ups or push-ups, it is just as effective as a weighted vest in adding resistance from gravity. Limitations in flexibility forward or backward or to the side in arms may or may not be present depending on the pack as they vary greatly.
A standard form of military and fire fighter training is not only be able to carry a backpack, but to march and run with one loaded down with a concrete "marble". Part of SWAT training is to be able to do pull-ups wearing a heavy pack.
Hip drags are not as useful due to their weight, but are small attachments which add drag during many movements in swimming by making the swimmer less streamlined. This added resistance allows the swimmer to build up more force, and swim faster when they are later removed.
Different from dip belts, weighted belts are affixed to the body and do not use suspended weights or swing. They are useful, like weighted vests, in having weight close to the core and mimic very well the additional weight one might have from body fat stored in the abdomen and lower back. The advantage over other core weights is the flexibility that is freed up by not constraining the upper body, the disadvantage being limited core flexion. There tends to be some overlap in certain larger weighted vests and the region covered by certain larger weighted belts near the upper abdominal muscles.
Upper arm weights are another method of adding weight close to the core beyond that of a weighted vest, or to add resistance to the shoulders with less danger to the elbows than wrist weights or the added biceps/triceps strain. A problem with these is similar to thigh weights in that those with large biceps, triceps, or fat around the region may experience tightness, and the tightness required can be straining in exercises that involve elbow extension, making it more suitable for leg and core movements.
Wrist weights are used in place of holding dumbbells (or to supplement them) or other hand-held weights as a way of adding leveraged resistance to the movement of the arms. Like ankle weights, practicing explosive movements is not advised, and if done, should be approached gradually, with acceleration before full extension, and also reduced gradually, to avoid over-extension injuries. Wrist weights are advantageous in that they do not require a strong grip or wrist extension for added arm resistance like held hand weights do. A disadvantage is that the tightness required to stop movements could possibly increase the damages in those with carpal tunnel syndrome.
Weighted gloves serve a similar purpose to wrist weights. Generally, they are worn to prepare for boxing in some fashion. Their advantage, beyond a slight increase in distance for leverage, is the lack of strain on the wrist from having weight isolated there, and better simulating sparring gloves. They are generally not very heavy, and since they limit the grip anyway, unless being used to practice specific striking fists, light dumbbells are more common.
Thigh weights are the most reasonable form of resistance. The location of the mass more readily duplicates the natural fat-storage mechanism of the human body and being closer to the core. In leg raise exercises, it allows more activation of the hip flexors (and abdominals) without putting more strain on the quadriceps muscles for extension, making it good for sports-specific training on movements like knees and jumping. The greater area and safe location allow it to handle much more weight. For those with wide thighs, such as bodybuilders with large quadriceps, or people with large amounts of fat stores on the inner thigh, it may cause chafing. If worn on both legs, however, the chafing would be between the weights and only damage them, possibly only chafing with a lack of tightness.
Thigh weights are not ideal for movements involving quadriceps use, as they require tightness which may limit the use of the muscle and blood flow to the legs. For such movements, weights worn higher on the body or free weights are more ideal.
Ankle weights are a commonly found weight used in many activities. Further from the core, fixated above the ankle around the lower shin and Achilles tendon, due to leverage much less weight is needed to increase the forces on the body.
As they are attached to a region with a far smaller diameter than the thigh, there is not room for much weight without greatly changing the effective width of the lower leg. An advantage over thigh weights is that they are not attached to any major muscle or fat storage region, so tightness is not a factor and it can be used in almost any exercise.
Being above the ankle, movements incorporating the calf muscles such as calf raises can benefit from ankle weights.
Ankle weights are useful in adding weight to pull-ups and dips, especially when incorporating leg raises into the movements. They are also useful in slow kicking katas, and static-active stretching of the legs when balancing on one leg, or suspended in the air.
Light ankle weights have a history of use resistance for kicking in swimming, and of forward flexion in kicking, walking, jogging, and sprinting exercises. Concern has been expressed regarding this type of training. It may put too much stress on the joints, similar to the shearing forces found in leg extension and leg curl exercises.
Practicing weighted movements at high speeds also causes the nervous system to fire at larger intensities. If an individual loses the weight without being trained to adapt to the transition, he may overexert himself without checking at the end of the movement and overextend a tendon. This is more of a risk when people fully extend their limbs in such movements and do not come to a controlled stop at the end, limiting muscle flexion. Generally, the muscle being extended is more at risk, not one held statically. For example, the quadriceps muscle could overexert in a snap kick trained with ankle weights, but in a rising kick, it is the hip flexor muscle more likely to overextend. In either case, the hamstring and associated ligaments would be at risk for a tear.
One major advantage to ankle weights, unlike wrist weights, is that it adds a whole new component to exercises that wrist weights do not, since we can't grip dumbbells with our feet like we can with our hands. It is a major advantage in training rotational hip stabilizers, to work on turnout for martial arts and dance postures. To do this, the leg is bent 90 degrees at the knee, and then rotated inwards and outwards to bring the foot upwards. This is commonly seen in footbag kicks and holds.
One potential disadvantage to ankle weights is they may add stress to ligaments in ankle or knee. For this reason, some expert physicians discourage running while wearing them.
Weighted footwear, such as "iron" boots, sandals, and shoes, are generally very similar to ankle weights. The main difference is that being below the ankle, the calf muscle is not activated at all in wearing them. Muscles in both legs only become stimulated when the leg is raised in the air (calf flexion for the rooted leg, hip/knee/ankle for the raised leg, or the entire body if suspended from pull-up bar).
For straight-leg flexion (front and back) the slight increase in distance does increase leverage somewhat. In regard to the flexion muscles of the ankle, weighted footwear provides unique methods of working them that ankle weights do not. Leverage is best when the weight is near the tip of the foot, either above the toes or (more often) below the ball of the foot. Flexed to the front, it works the muscle opposite the calf, which is very useful as it is not a commonly activated muscle for movement, generally only a stabilizer to the calf muscle. It is very useful in retaining flexibility. The calf muscle can also be activated, but the leg must be raised behind the body as to make gravity resisting the flexion. At the front of the body, it would only assist calf flexion.
An advantage to weighted footwear is that they can be inconspicuous, depending upon the weight and the form of the footwear in question. This mainly applies to those with a fixed weight, adjustable weighted footwear is more obvious, and may not even be used as normal footwear at all inherent to their design, an example being weighted boots with a pole for the weight stack extending directly from the sole of the foot.
For footwear which can be worn normally, an advantage to wearing them beyond additional training stimulus, is their additional mass, which creates far more downward force than one would otherwise have, with foot-dropping attacks such as axe kicks and stomps. To gain this energy, more initial energy must be expended in hip flexion (and possibly knee extension) to raise the foot from the ground.
Sensory integration therapy, a popular therapy for children with autism and other developmental disabilities, often employs weighted vests, weighted belts and weighted blankets, under the theory that behavioral problems such as inattentiveness and stereotypy are due to over- or under-sensitivity to sensory input, and that weighted belts and weighted blankets provide proprioceptive feedback that has a calming effect. Only a limited amount of scientific research is available on this treatment, but it suggests no significant improvement with weighted vests. [5] [6]
The human leg is the entire lower limb of the human body, including the foot, thigh or sometimes even the hip or buttock region. The major bones of the leg are the femur, tibia, and adjacent fibula. The thigh is between the hip and knee, while the calf (rear) and shin (front) are between the knee and foot.
Calisthenics or callisthenics (/ˌkælɪsˈθɛnɪks/) is a form of strength training that utilizes an individual's body weight as resistance to perform multi-joint, compound movements with little or no equipment.
Achilles tendinitis, also known as achilles tendinopathy, occurs when the Achilles tendon, found at the back of the ankle, becomes sore. Achilles tendinopathy is accompanied by alterations in the tendon's structure and mechanical properties. The most common symptoms are pain and swelling around the affected tendon. The pain is typically worse at the start of exercise and decreases thereafter. Stiffness of the ankle may also be present. Onset is generally gradual.
A squat is a strength exercise in which the trainee lowers their hips from a standing position and then stands back up. During the descent, the hip and knee joints flex while the ankle joint dorsiflexes; conversely the hip and knee joints extend and the ankle joint plantarflexes when standing up. Squats also help the hip muscles.
An isometric exercise is an exercise involving the static contraction of a muscle without any visible movement in the angle of the joint. The term "isometric" combines the Greek words isos (equal) and -metria (measuring), meaning that in these exercises the length of the muscle and the angle of the joint do not change, though contraction strength may be varied. This is in contrast to isotonic contractions, in which the contraction strength does not change, though the muscle length and joint angle do.
Plyometrics, also known as jump training or plyos, are exercises in which muscles exert maximum force in short intervals of time, with the goal of increasing power (speed-strength). This training focuses on learning to move from a muscle extension to a contraction in a rapid or "explosive" manner, such as in specialized repeated jumping. Plyometrics are primarily used by athletes, especially martial artists, sprinters and high jumpers, to improve performance, and are used in the fitness field to a much lesser degree.
In weight training, a kettlebell is a cast-iron or cast-steel ball with a handle attached to the top. It is used to perform many types of exercises, including ballistic exercises that combine cardiovascular, strength and flexibility training. Kettlebells are the primary equipment used in the weight-lifting sport of kettlebell lifting.
Motion, the process of movement, is described using specific anatomical terms. Motion includes movement of organs, joints, limbs, and specific sections of the body. The terminology used describes this motion according to its direction relative to the anatomical position of the body parts involved. Anatomists and others use a unified set of terms to describe most of the movements, although other, more specialized terms are necessary for describing unique movements such as those of the hands, feet, and eyes.
The following outline is provided as an overview of and topical guide to exercise:
Bodyweight exercises are strength training exercises that use an individual's own weight to provide resistance against gravity. Bodyweight exercises can enhance a range of biomotor abilities including strength, power, endurance, speed, flexibility, coordination and balance. Such strength training has become more popular among recreational and professional athletes. Bodyweight training uses simple abilities like pushing, pulling, squatting, bending, twisting and balancing. Movements such as the push-up, the pull-up, and the sit-up are among the most common bodyweight exercises.
Running economy (RE) a complex, multifactorial concept that represents the sum of metabolic, cardiorespiratory, biomechanical and neuromuscular efficiency during running. Oxygen consumption (VO2) is the most commonly used method for measuring running economy, as the exchange of gases in the body, specifically oxygen and carbon dioxide, closely reflects energy metabolism. Those who are able to consume less oxygen while running at a given velocity are said to have a better running economy. However, straightforward oxygen usage does not account for whether the body is metabolising lipids or carbohydrates, which produce different amounts of energy per unit of oxygen; as such, accurate measurements of running economy must use O2 and CO2 data to estimate the calorific content of the substrate that the oxygen is being used to respire.
A dip is an upper-body strength exercise. Close grip dips primarily train the triceps, with major synergists being the anterior deltoid, the pectoralis muscles, and the rhomboid muscles of the back. Wide shoulder width dips place additional emphasis on the pectoral muscles, similar in respect to the way a wide grip bench press would focus more on the pectorals and less on the triceps.
The Roman chair is a piece of exercise equipment. It is mainly used for the lower back, but can also target the buttocks, hamstrings, and abdomen. The definition of the equipment, and what 'Roman chair exercise' specifically means, is not clear.
Calf raises are a method of exercising the triceps surae, tibialis posterior, and peroneal muscles of the lower leg. The movement performed is plantar flexion, also called ankle extension.
A patellar dislocation is a knee injury in which the patella (kneecap) slips out of its normal position. Often the knee is partly bent, painful and swollen. The patella is also often felt and seen out of place. Complications may include a patella fracture or arthritis.
The leg raise is a strength training exercise which targets the iliopsoas. Because the abdominal muscles are used isometrically to stabilize the body during the motion, leg raises are also often used to strengthen the rectus abdominis muscle and the internal and external oblique muscles.
Orthotics is a medical specialty that focuses on the design and application of orthoses, sometimes known as braces or calipers. An orthosis is "an externally applied device used to influence the structural and functional characteristics of the neuromuscular and skeletal systems." Orthotists are professionals who specialize in designing these braces.
Power training typically involves exercises which apply the maximum amount of force as fast as possible; on the basis that strength + speed = power. Jumping with weights or throwing weights are two examples of power training exercises. Regular weight training exercises such as the clean and jerk and power clean may also be considered as being power training exercises due to the explosive speed required to complete the lifts. Power training may also involve contrasting exercises such as heavy lifts and plyometrics, known as complex training, in an attempt to combine the maximal lifting exertions with dynamic movements. This combination of a high strength exercise with a high speed exercise may lead to an increased ability to apply power. Power training frequently specifically utilises two physiological processes which increase in conjunction with one another during exercise. These are deep breathing, which results in increased intra-abdominal pressure; and post-activation potentation, which is the enhanced activation of the nervous system and increased muscle fibre recruitment. Power training programmes may be shaped to increase the trainee's ability to apply power in general, to meet sports specific criteria, or both.
Barre is a form of physical exercise, usually conducted in group classes in gyms or specialty studios. It is distinguished from other group fitness activities by its use of the ballet barre and its incorporation of movements derived from ballet. These classical dance movements and positions are combined with those drawn from yoga and pilates, and other equipment is sometimes used in addition to the barre, such as resistance bands, yoga straps, exercise balls and hand weights. Barre classes typically focus on small, pulsing movements with emphasis on form, alignment and core engagement. Participants hold their bodies still while contracting specific, targeted sets of muscles in isometric exercises. Repetitions tend to be high, range-of-motion small, and weights, when used, light. Barre classes focus on the lower body and core, developing strength and flexibility from the ankles up though the calves, knees, thighs, glutes and abdominals. Holding muscles in contraction for extended periods frequently leads to them shaking as they fatigue. This is particularly true of thighs, as the quadriceps tire.