Welder certification

Last updated

Welder certification, (also known as welder qualification) is a process which examines and documents a welder's capability to create welds of acceptable quality following a well defined welding procedure.

Contents

Method

Welder certification is based on specially designed tests to determine a welder's skill and ability to deposit sound weld metal. The main part of the welder's test consists of welding one or more test coupons which are then examined using non-destructive and destructive methods. The extent of certification is described by a number of variables, which include the specific welding process, type of deposited metal, thickness, joint design, position, backing, and others. Most often, the test is conducted in accordance with a particular code. Depending on product requirements the test can be administered under the auspices of a national or international organization, such as the American Welding Society (AWS), or American Society of Mechanical Engineers (ASME), but manufacturers may specify their own standards and requirements as well. Most certifications expire after a certain time limit, and have different requirements for renewal or extension of the certification.

In the USA, welder qualification is performed according to AWS D1.1, [1] ASME Section IX [2] and API 1104 [3] standards, which are also used in some other countries. Some States have their own Welder Qualifications that supersede AWS Qualifications, but most defer to AWS, ASME or API.

In Canada, welder qualification is carried out according to CSA Standards and ASME. [2] The ASME code is typically used for pressure vessel and pressure piping applications, and CSA Standards are used for structural, general manufacturing and non-pressure applications. There are 3 major CSA Standards to which welders may be qualified: CSA W47.1 [4] for steels (including stainless steels), CSA W47.2 [5] for aluminum, and CSA W186 [6] for reinforcing bars. Under these CSA standards, welder qualification testing is carried out every 2 years by the Canadian Welding Bureau to ensure ongoing competence.

In Europe, the European Committee for Standardization (CEN) has adopted the ISO standards on welder qualification (ISO 9606), [7] to replace the old European EN 287 series. [8] Operators of automated welding systems are certified according to EN 1418. [9] In Europe welders are often certified by third party Personnel Certification Bodies, like The Welding Institute (TWI/CSWIP). [10] Welders involved in the manufacture of equipment that falls within the scope of the Pressure Equipment Directive must be approved by a competent third party which may be either a notified body or a third-party organization recognized by a Member State. [11]

Once a welder passes a test (or a series of tests), their employer or third party involved will certify their ability to pass the test, and the limitations or extent they are qualified to weld, as a written document (welder qualification test record, or WQTR). Normally this document is valid for a limited period (usually for two years), after which the welder must be retested. However some Qualifications are only valid for a single project, while others are unlimited as long as welders do not go beyond a specified length of time without performing that specific type of welding (this period is typically 6 months). Welders must maintain a log to demonstrate they have maintained their Qualifications.

Welding inspector certification

In addition to welders and welding machine operators, there are also schemes to independently certify welding inspectors and related specialities. The duties of the welding inspector are described in ISO 14731; [12] however the requirement for inspector certification are not standardized, so there are differences in requirement between the various schemes. Some notable schemes established by personnel certification bodies are those of the American Welding Society, of the British Institute of Non-Destructive Testing (PCN), of The Welding Institute (CSWIP) and of the Canadian Welding Bureau (CSA W178.2).

The American Welding Society offers the following programs: [13]

The British Institute of Non-Destructive Testing offers three levels of certification: [15]

The Welding Institute (TWI) in the United Kingdom offers the following certification scheme: [16]

The Canadian Welding Bureau offers the following programs: [17]

The BINDT/PCN and TWI/CSWIP schemes are accredited by UKAS under ISO/IEC 17024. There are many other general schemes, as well as sector specific schemes.

In 2008, the American Petroleum Institute introduced the API 577 Advanced Welding Inspection and Metallurgy programme of certification. Certification is issued following the successful completion of a multiple choice exam which is based on the recommended practice document API 577. Certification identifies the candidate as a 'Welding Inspection and Metallurgy Professional', as opposed to a certified welding inspector under other programmes. [18]

See also

Related Research Articles

<span class="mw-page-title-main">Nondestructive testing</span> Evaluating the properties of a material, component, or system without causing damage

Nondestructive testing (NDT) is any of a wide group of analysis techniques used in science and technology industry to evaluate the properties of a material, component or system without causing damage. The terms nondestructive examination (NDE), nondestructive inspection (NDI), and nondestructive evaluation (NDE) are also commonly used to describe this technology. Because NDT does not permanently alter the article being inspected, it is a highly valuable technique that can save both money and time in product evaluation, troubleshooting, and research. The six most frequently used NDT methods are eddy-current, magnetic-particle, liquid penetrant, radiographic, ultrasonic, and visual testing. NDT is commonly used in forensic engineering, mechanical engineering, petroleum engineering, electrical engineering, civil engineering, systems engineering, aeronautical engineering, medicine, and art. Innovations in the field of nondestructive testing have had a profound impact on medical imaging, including on echocardiography, medical ultrasonography, and digital radiography.

<span class="mw-page-title-main">Inspection</span> Organized examination or formal evaluation exercise

An inspection is, most generally, an organized examination or formal evaluation exercise. In engineering activities inspection involves the measurements, tests, and gauges applied to certain characteristics in regard to an object or activity. The results are usually compared to specified requirements and standards for determining whether the item or activity is in line with these targets, often with a Standard Inspection Procedure in place to ensure consistent checking. Inspections are usually non-destructive.

Dye penetrant inspection (DP), also called liquid penetrate inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to check surface-breaking defects in all non-porous materials. The penetrant may be applied to all non-ferrous materials and ferrous materials, although for ferrous components magnetic-particle inspection is often used instead for its subsurface detection capability. LPI is used to detect casting, forging and welding surface defects such as hairline cracks, surface porosity, leaks in new products, and fatigue cracks on in-service components.

<span class="mw-page-title-main">Plastic welding</span> Welding of semi-finished plastic materials

Plastic welding is welding for semi-finished plastic materials, and is described in ISO 472 as a process of uniting softened surfaces of materials, generally with the aid of heat. Welding of thermoplastics is accomplished in three sequential stages, namely surface preparation, application of heat and pressure, and cooling. Numerous welding methods have been developed for the joining of semi-finished plastic materials. Based on the mechanism of heat generation at the welding interface, welding methods for thermoplastics can be classified as external and internal heating methods, as shown in Fig 1.

An elevator consultant is someone who specializes in the design, testing and maintenance inspection of elevators, escalators, moving walkways and many other conveyances that move people. They are not to be confused with elevator mechanics. Consultants do not normally perform work on conveyances. Some elevator consultants may also work as private elevator inspectors. Some jurisdictions may accept independent third party inspectors for certified inspections while others may employ their own inspectors.

ISO 3977 is an international standard related to the design and procurement of gas turbine system applications. ISO 3977 is based primarily on the ASME 133 series on gas turbines, as well as the API 616 and API 11PGT standards. The standard environmental design point of any gas turbine system is 15 °C, 60% relative humidity, and sea level elevation. The standard is divided into eight parts and covers procurement, design requirements, installation, and reliability.

<span class="mw-page-title-main">Certification</span> Formal confirmation of certain characteristics of an object, person or organization

Certification is part of testing, inspection and certification and the provision by an independent body of written assurance that the product, service or system in question meets specific requirements. It is the formal attestation or confirmation of certain characteristics of an object, person, or organization. This confirmation is often, but not always, provided by some form of external review, education, assessment, or audit. Accreditation is a specific organization's process of certification. According to the U.S. National Council on Measurement in Education, a certification test is a credentialing test used to determine whether individuals are knowledgeable enough in a given occupational area to be labeled "competent to practice" in that area.

<span class="mw-page-title-main">Product certification</span> Performance and quality assurance

Product certification or product qualification is the process of certifying that a certain product has passed performance tests and quality assurance tests, and meets qualification criteria stipulated in contracts, regulations, or specifications.

<span class="mw-page-title-main">Industrial radiography</span> Type of non-destructive testing

Industrial radiography is a modality of non-destructive testing that uses ionizing radiation to inspect materials and components with the objective of locating and quantifying defects and degradation in material properties that would lead to the failure of engineering structures. It plays an important role in the science and technology needed to ensure product quality and reliability. In Australia, industrial radiographic non-destructive testing is colloquially referred to as "bombing" a component with a "bomb".

<span class="mw-page-title-main">American Welding Society</span> American non-profit organization

The American Welding Society (AWS) was founded in 1919 as a non-profit organization to advance the science, technology and application of welding and allied joining and cutting processes, including brazing, soldering and thermal spraying.

<span class="mw-page-title-main">Welding Procedure Specification</span>

A Welding Procedure Specification (WPS) is a formal document describing welding procedures. It is an internal document used by welding companies to instruct welders on how to achieve quality production welds that meet all relevant code requirements. Each company typically develops their own WPS for each material alloy and for each welding type used. Specific codes and/or engineering societies are often the driving force behind the development of a company's WPS. A WPS is supported by a Procedure Qualification Record, a formal record of a test weld performed and rigorously tested to ensure that the procedure will produce a good weld. Individual welders are certified with a qualification test documented in a Welder Qualification Test Record (WQTR) that shows they have the understanding and demonstrated ability to work within the specified WPS.

Weld quality assurance is the use of technological methods and actions to test or assure the quality of welds, and secondarily to confirm the presence, location and coverage of welds. In manufacturing, welds are used to join two or more metal surfaces. Because these connections may encounter loads and fatigue during product lifetime, there is a chance they may fail if not created to proper specification.

<span class="mw-page-title-main">Canadian Welding Bureau</span>

The Canadian Welding Bureau is a certification and registration organization for companies involved in the welding of steel structures. Welders in Canada are required to be retested every two years by the Canadian Welding Bureau. The CWB Group was formed in 1947 to administer the then, new W47.1 welding standard for structural steel. The CWB has today expanded its scope well beyond the original structural steel roots and is accredited by the Standards Council of Canada as a Certification Body for the administration of CSA Standards including W47.1, W47.2, W55.3, W186, W178.1 and W48 to industries across Canada and internationally for:

The ASME Boiler & Pressure Vessel Code (BPVC) is an American Society of Mechanical Engineers (ASME) standard that regulates the design and construction of boilers and pressure vessels. The document is written and maintained by volunteers chosen for their technical expertise. The ASME works as an accreditation body and entitles independent third parties to inspect and ensure compliance to the BPVC.

The British Institute of Non-Destructive Testing or BINDT is a professional body for engineers and other technical professionals involved in non-destructive testing and condition monitoring in the United Kingdom. The institute was founded in 1976, by amalgamation of the Society of Non-Destructive Examination (SONDE) and the NDT Society of Great Britain (NDTS), which were both founded in 1954.

<span class="mw-page-title-main">European Federation for Welding, Joining and Cutting</span> Welding organization

The European Federation for Welding, Joining and Cutting (EWF) is an organization dedicated to education, training, qualification and certification in the field of welding and related technologies.

The Australian Diver Accreditation Scheme (ADAS) is an international commercial and occupational diver certification scheme. It has mutual recognition arrangements with other equivalent national schemes. ADAS qualifications have international recognition.

A mill test report (MTR) and often also called a certified mill test report, certified material test report, mill test certificate (MTC), inspection certificate, certificate of test, or a host of other names, is a quality assurance document used in the metals industry that certifies a material's chemical and physical properties and states a product made of metal complies with an international standards organization specific standards.

AMADA WELD TECH, a subsidiary of AMADA WELD TECH CO., LTD, designs and manufactures equipment and systems for resistance welding, laser welding, laser marking, laser cutting, laser micro machining, hermetic sealing, micro tig welding, and hot bar reflow soldering and bonding. Established in 1948, AMADA WELD TECH is headquartered in Monrovia, California, US. The company's equipment is used in numerous industries, chief among which are medical, aerospace, automotive, batteries, and electronic components. AMADA WELD TECH has approximately 200 employees, with 7 sales and manufacturing offices serving about 12,000 customers worldwide. More than 80,000 items are manufactured annually. The company is certified to ISO 9001:2015, China Compulsory Certificate (CCC), European Conformity (CE), and Canadian Standards Association (CSA) quality certifications.

References

  1. ↑ AWS D1.1/D1.1M: "Structural Welding Code — Steel" (section 4C)
  2. 1 2 ASME Boiler and Pressure Vessel Code section IX: "Qualification Standard for welding and brazing procedures, welders, brazers and welding and brazing operators". Article III: Welding Performance Qualifications.
  3. ↑ API 1104: "Welding of pipelines and related facilities", part 6
  4. ↑ CSA Standard W47.1: Certification of companies for the fusion welding of steel (2009)
  5. ↑ CSA Standard W47.2: Certification of companies for the fusion welding of aluminum (2011)
  6. ↑ CSA W186: Welding of Reinforcing Bars in Reinforced Concrete Construction (1990)
  7. ↑ EN ISO 9606: "Qualification test of welders — Fusion welding (ISO 9606)" four parts
  8. ↑ EN 287: "Qualification test of welders — Fusion welding"
  9. ↑ BS EN 1418: "Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials" (1998)
  10. ↑ "Certification Scheme for Personnel - Welders". The Welding Institute. Retrieved 2013-07-04.
  11. ↑ "Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment", Official Journal L 189, 2014-06-27, Article 24 and Annex I, item 3.1.2
  12. ↑ BS EN ISO 14731: "Welding coordination — Tasks and responsibilities" (2006), paragraphs 3.4, B.12, B.13, B.14
  13. ↑ AWS QC1: Standard for AWS Certification of Welding Inspectors (2007)
  14. ↑ AWS QC15: "Specification for the Certification of Radiographic Interpreters" (2008)
  15. ↑ PCN WI: Specific requirements for the certification of personnel for weld inspection, Issue 3.A (2007)
  16. ↑ CSWIP-WI-6-92: Requirements for the Certification of Visual Welding Inspectors (Level 1), Welding Inspectors (Level 2) and Senior Welding Inspectors (Level 3) (fusion welding) in accordance with the requirements of BS EN ISO 17637:2011 Archived 2012-03-31 at the Wayback Machine (2011)
  17. ↑ CSA Standard W178.2: Certification of Welding Inspectors(2008)
  18. ↑ API 577 – Advanced Welding Inspection & Metallurgy Professional Program - American Petroleum Institute. Retrieved 27 April 2015.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.