Wireless site survey

Last updated

A wireless site survey, sometimes called an RF (Radio Frequency) site survey or wireless survey, is the process of planning and designing a wireless network, to provide a wireless solution that will deliver the required wireless coverage, data rates, network capacity, roaming capability and quality of service (QoS). [1] The survey usually involves a site visit to test for RF interference, and to identify optimum installation locations for access points. This requires analysis of building floor plans, inspection of the facility, and use of site survey tools. Interviews with IT management and the end users of the wireless network are also important to determine the design parameters for the wireless network.

Contents

As part of the wireless site survey, the effective range boundary is set, which defines the area over which signal levels needed support the intended application. This involves determining the minimum signal-to-noise ratio (SNR) needed to support performance requirements.

Wireless site survey can also mean the walk-testing, auditing, analysis or diagnosis of an existing wireless network, particularly one which is not providing the level of service required. [1]

Wireless site survey process

Wireless site surveys are typically conducted using computer software that collects and analyses WLAN metrics and/or RF spectrum characteristics. Before a survey, a floor plan or site map is imported into a site survey application and calibrated to set scale. During a survey, a surveyor walks the facility with a portable computer that continuously records the data. The surveyor either marks the current position on the floor plan manually, by clicking on the floor plan, or uses a GPS receiver that automatically marks the current position if the survey is conducted outdoors. After a survey, data analysis is performed and survey results are documented in site survey reports generated by the application. The data is often presented along with a wireless heat map based on the recorded metrics. [2]

All these data collection, analysis, and visualization tasks are highly automated in modern software. In the past, however, these tasks required manual data recording and processing. [3] [4]

Types of wireless site surveys

There are three main types of wireless site surveys: passive, active, and predictive. [5]

During a passive survey, a site survey application passively listens to WLAN traffic to detect active access points, measure signal strength and noise level. However, the wireless adapter being used for a survey is not associated to any WLANs. For system design purposes, one or more temporary access points are deployed to identify and qualify access point locations. This used to be the most common method of pre-deployment Wi-Fi survey.

During an active survey, the wireless adapter is associated with one or several access points to measure round-trip time, throughput rates, packet loss, and retransmissions. Active surveys are used to troubleshoot Wi-Fi networks or to verify performance post-deployment.

During a predictive survey, a model of the RF environment is created using simulation tools. It is essential that the correct information on the environment is entered into the RF modeling tool, including location and RF characteristics of barriers like walls or large objects. Therefore, temporary access points or signal sources can be used to gather information on propagation in the environment. Virtual access points are then placed on the floor plan to estimate expected coverage and adjust their number and location. The value of a predictive survey as a design tool versus a passive survey done with only a few access point is that modeled interference can be taken into account in the design.

Additionally, some survey application allow the user to collect RF spectrum data using portable hardware spectrum analyzers, which is beneficial in case of high RF interference from non-802.11 sources, such as microwave ovens or cordless phones. [6] [7]

Site survey software and hardware

Depending on the survey type, a number of software and software/hardware options are available to WLAN surveyors.

Software

Passive and active surveys are performed using software and typically require only a compatible off-the-shelf Wi-Fi adapter; no additional specialized hardware is required. [2] Predictive surveys require no hardware at all, as no wireless data collection is needed. Currently, professional-level site survey applications exist primarily for Microsoft Windows. Some site survey applications for other platforms, including iOS and Android, also exist, however they are limited in functionality due to the limitations of the underlying platform API. For example, signal level measurements cannot be obtained on iOS without jailbreaking. [8] The feasibility of creating professional-level applications for non-Windows tablets is debated. [9] [10]

Hardware

Unlike passive and active surveys, RF spectrum surveys require specialized RF equipment. There are various types of spectrum analyzers ranging from large and expensive bench-top units to portable ("field units") and USB-based analyzers. Because portability is a decisive factor in conducting wireless site surveys, spectrum analyzers in USB form factor are widely used today. [5] They typically cover multiple bands; dual-band (2.4/5 GHz) and triple-band (2.4/5/6 GHz) models are available. A number of WLAN chipset manufacturers incorporate spectrum analysis into their chipset designs; [5] this functionality is integrated into some high-end enterprise-class Wi-Fi access points. [11] [12]

Related Research Articles

<span class="mw-page-title-main">Wireless LAN</span> Computer network that links devices using wireless communication within a limited area

A wireless LAN (WLAN) is a wireless computer network that links two or more devices using wireless communication to form a local area network (LAN) within a limited area such as a home, school, computer laboratory, campus, or office building. This gives users the ability to move around within the area and remain connected to the network. Through a gateway, a WLAN can also provide a connection to the wider Internet.

<span class="mw-page-title-main">Wireless network</span> Computer network not fully connected by cables

A wireless network is a computer network that uses wireless data connections between network nodes. Wireless networking allows homes, telecommunications networks, and business installations to avoid the costly process of introducing cables into a building, or as a connection between various equipment locations. Admin telecommunications networks are generally implemented and administered using radio communication. This implementation takes place at the physical level (layer) of the OSI model network structure.

<span class="mw-page-title-main">Packet analyzer</span> Computer network equipment or software that analyzes network traffic

A packet analyzer is a computer program or computer hardware such as a packet capture appliance that can analyze and log traffic that passes over a computer network or part of a network. Packet capture is the process of intercepting and logging traffic. As data streams flow across the network, the analyzer captures each packet and, if needed, decodes the packet's raw data, showing the values of various fields in the packet, and analyzes its content according to the appropriate RFC or other specifications.

<span class="mw-page-title-main">Wi-Fi</span> Wireless local area network

Wi-Fi is a family of wireless network protocols based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio waves. These are the most widely used computer networks, used globally in home and small office networks to link devices and to provide Internet access with wireless routers and wireless access points in public places such as coffee shops, hotels, libraries, and airports.

<span class="mw-page-title-main">Wireless</span> Transfer of information or power that does not require the use of physical wires

Wireless communication is the transfer of information (telecommunication) between two or more points without the use of an electrical conductor, optical fiber or other continuous guided medium for the transfer. The most common wireless technologies use radio waves. With radio waves, intended distances can be short, such as a few meters for Bluetooth, or as far as millions of kilometers for deep-space radio communications. It encompasses various types of fixed, mobile, and portable applications, including two-way radios, cellular telephones, personal digital assistants (PDAs), and wireless networking. Other examples of applications of radio wireless technology include GPS units, garage door openers, wireless computer mouse, keyboards and headsets, headphones, radio receivers, satellite television, broadcast television and cordless telephones. Somewhat less common methods of achieving wireless communications involve other electromagnetic phenomena, such as light and magnetic or electric fields, or the use of sound.

<span class="mw-page-title-main">Wardriving</span> Search for wireless networks with mobile computing equipment

Wardriving is the act of searching for Wi-Fi wireless networks as well as cell towers, usually from a moving vehicle, using a laptop or smartphone. Software for wardriving is freely available on the internet.

<span class="mw-page-title-main">Spectrum analyzer</span> Electronic testing device

A spectrum analyzer measures the magnitude of an input signal versus frequency within the full frequency range of the instrument. The primary use is to measure the power of the spectrum of known and unknown signals. The input signal that most common spectrum analyzers measure is electrical; however, spectral compositions of other signals, such as acoustic pressure waves and optical light waves, can be considered through the use of an appropriate transducer. Spectrum analyzers for other types of signals also exist, such as optical spectrum analyzers which use direct optical techniques such as a monochromator to make measurements.

<span class="mw-page-title-main">Wireless security</span> Aspect of wireless networks

Wireless security is the prevention of unauthorized access or damage to computers or data using wireless networks, which include Wi-Fi networks. The term may also refer to the protection of the wireless network itself from adversaries seeking to damage the confidentiality, integrity, or availability of the network. The most common type is Wi-Fi security, which includes Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA). WEP is an old IEEE 802.11 standard from 1997. It is a notoriously weak security standard: the password it uses can often be cracked in a few minutes with a basic laptop computer and widely available software tools. WEP was superseded in 2003 by WPA, a quick alternative at the time to improve security over WEP. The current standard is WPA2; some hardware cannot support WPA2 without firmware upgrade or replacement. WPA2 uses an encryption device that encrypts the network with a 256-bit key; the longer key length improves security over WEP. Enterprises often enforce security using a certificate-based system to authenticate the connecting device, following the standard 802.11X.

AirMagnet was a Wi-Fi wireless network assurance company based in Sunnyvale, California. The firm was founded in 2001 by Dean T. Au, Chia-Chee Kuan and Miles Wu and shipped its first WLAN analyzer product in 2002. In August 2006, the company shipped the Vo-Fi Analyzer, the first voice-over-Wi-Fi analyzer that could be used on encrypted VoWLAN networks. It was backed by venture capital firms such as Intel Capital, Acer Technology Ventures and VenGlobal.

Omnipeek is a packet analyzer software tool from Savvius, a LiveAction company, for network troubleshooting and protocol analysis. It supports an application programming interface (API) for plugins.

<span class="mw-page-title-main">WokFi</span> Homemade Wi-Fi antenna

WokFi is a slang term for a style of homemade Wi-Fi antenna consisting of a crude parabolic antenna made with a low-cost Asian kitchen wok, spider skimmer or similar household metallic dish. The dish forms a directional antenna which is pointed at the wireless access point antenna, allowing reception of the wireless signal at greater distances than standard omnidirectional Wi-Fi antennas.

Cognio, Inc. was an American company that developed and marketed radio frequency (RF) spectrum analysis products that find and solve channel interference problems on wireless networks and in wireless applications. Cognio’s Spectrum Expert product was designed for common frequency bands such as RFID and Wi-Fi. It was sold primarily to network engineers responsible for security for wireless networks or applications that run on wireless networks. Cognio was acquired by Cisco Systems in 2007.

<span class="mw-page-title-main">Daintree Networks</span> Building automation company

Daintree Networks, Inc. was a building automation company that provided wireless control systems for commercial and industrial buildings. Founded in 2003, Daintree was headquartered in Los Altos, California, with an R&D lab in Melbourne, Australia.

There are several uses of the 2.4 GHz ISM radio band. Interference may occur between devices operating at 2.4 GHz. This article details the different users of the 2.4 GHz band, how they cause interference to other users and how they are prone to interference from other users.

CommView is an application for network monitoring, packet analysis, and decoding. There are two editions of CommView: the standard edition for Ethernet networks and the wireless edition for 802.11 networks named CommView for WiFi. The application runs on Microsoft Windows. It is developed by TamoSoft, a privately held New Zealand company founded in 1998.

<span class="mw-page-title-main">Meru Networks</span> American networking equipment manufacturer

Meru Networks was a supplier of wireless local area networks (WLANs) to healthcare, enterprise, hospitality, K-12 education, higher education, and other markets. Founded in 2002 and headquartered in Sunnyvale, California, United States, the company made its initial public offering in March 2010, and was acquired by Fortinet in May 2015.

TamoGraph Site Survey is an application for performing Wi-Fi site surveys and RF planning. It supports 802.11be, 802.11ax, 802.11ac, 802.11n, 802.11a, 802.11b, and 802.11g wireless networks. TamoGraph is developed by TamoSoft, a privately held New Zealand company founded in 1998 that specializes in network analysis software.

NetSpot is a software tool for wireless network assessment, scanning, and surveys, analyzing Wi-Fi coverage and performance. It runs on Mac OS X 10.6+ and Windows 7, 8, 10, and 11. Netspot supports 802.11n, 802.11a, 802.11b, and 802.11g wireless networks and uses the standard Wi-Fi network adapter and its Airport interface to map radio signal strength and other wireless network parameters, and build reports on that. NetSpot was released in August 2011.

<span class="mw-page-title-main">WiFi Explorer</span> Wireless network scanner tool for macOS

WiFi Explorer is a wireless network scanner tool for macOS that can help users identify channel conflicts, overlapping and network configuration issues that may be affecting the connectivity and performance of Wi-Fi networks.

WiFi sensing uses existing Wi-Fi signals to detect events or changes such as motion, gesture recognition, and biometric measurement. WiFi sensing is a combination of Wi-Fi and radar sensing technology working in tandem to enable usage of the same Wi-Fi transceiver hardware and RF spectrum for both communication and sensing.

References

  1. 1 2 Joshua Bardwell; Devin Akin (2005). Certified Wireless Network Administrator Official Study Guide (Third ed.). McGraw-Hill. pp. 479–547. ISBN   978-0-07-225538-6.
  2. 1 2 Mason, Jeff. "WiFi Heat Maps – Software/Tools to Create Maps & Layouts of your Wireless Networks". ITTsystems.com. Retrieved 8 March 2019.
  3. ↑ "Wireless Site Survey FAQ" . Retrieved 2012-01-12.
  4. ↑ "Performing a Site Survey" . Retrieved 2012-01-12.
  5. 1 2 3 Shawn M. Jackman; Matt Swartz; Marcus Burton; Thomas W. Head (2011). Certified Wireless Design Professional Official Study Guide. John Wiley & Sons. pp. 392–396, 403–418. ISBN   978-0-470-76904-1.
  6. ↑ "Automated 802.11 Spectrum Analysis/Remediation: Benefits And Implications" . Retrieved 2012-01-12.
  7. ↑ "Analyze this: Low-cost wireless spectrum analyzers do the trick" . Retrieved 2012-01-12.
  8. ↑ "Apple Bans Wi-Fi Stumbler iPhone Apps – Blames Use Of Private APIs" . Retrieved 2012-01-12.
  9. ↑ "Argument Against Using iPad for WiFi Surveys" . Retrieved 2012-01-12.
  10. ↑ "Site survey for iPad users" . Retrieved 2012-01-12.
  11. ↑ "Cisco's CleanAir Spectrum Analysis: Review". 2010-08-13.
  12. ↑ "Aerohive Platform Upgrade Includes Spectrum Analysis, Mobile Device Authentication". 2011-05-31.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.