The .40 Super (10.2x25mm) is a powerful automaticpistol cartridge developed through the collaboration of Fernando Coelho and Tom Burczynski and introduced by Triton Cartridge in 1996. It delivers ballistics comparable to the .41 Magnum revolver cartridge, yet functions in standard 1911s and other full-size pistols. A 5” 1911 chambered in the cartridge is capable of penetrating 46” of Clear Ballistics gel.
The cartridge never attained mainstream success, Triton Cartridge eventually suspended operations, and supplies and support for the round are now limited.[1]
History and design
In 1994 Triton Cartridge, an ammunition company based in upstate NY, released a cartridge called the .45 Super. Essentially, the .45 Super is based on a .451 Detonics[2] case trimmed to .45 ACP length. Pioneered by writers Dean Grennell and the late Tom Ferguson, the .45 Super raised the performance level for .45 ACP-chambered autos beyond that of the .45 ACP+P and even the 10mm Auto.
Triton logo
With the availability of the strong .45 Super cartridge case, in January 1996 Fernando Coelho (president and founder of Triton Cartridge) and Tom Burczynski (inventor of Hydra-Shok, Starfire and Quik-Shok bullets) began work on a new, more radical cartridge. Based on a .45 Super necked down to .40 caliber, the new cartridge began to take shape.
Necking a .45 ACP to .40 caliber was nothing new. Before the public debut of the .40 S&W, Charles Petty, a well-known and respected writer, had already ventured into the bottleneck arena. His cartridge, called the "10mm Centaur", was based on a .45 ACP case necked to .40 caliber using 10mm dies. Prior to that, Dean Grennell took .451[2] Detonics cases and necked them down to 9mm, calling it the ".38/45 Hard Head". In 1984 J.D. Jones of SSK Industries created a wildcat based on the full length .451 Detonics Magnum case necked to hold the 170 JHP .41 caliber bullet designed for the 41 Remington Magnum. He called this wildcat the 41 Avenger. SSK offered 41 Avenger barrels with case forming and reloading dies as a kit for the Colt 1911.
Petty and Tony Rumore (Tromix) were major contributors in the initial load development for Triton's new cartridge. During that time, Triton began closely examining the specific attributes of the cartridge (feed reliability, case strength, down-range ballistic performance, etc.). In order to maximize the performance potential and reliability of the new cartridge, it was decided to lengthen the cartridge case from .45 ACP (.898 in) to 10mm (.992 in) length. By trimming .45 Winchester Magnum brass to 10mm case length and necking them to .40 caliber, the .40 Super began to take final shape.
.40 Super ammunition box
Working closely with Starline Brass Company, more testing was conducted on the cartridge case. These tests led to further improvements. A small primer pocket replaced the large primer pocket. This allowed the use of small pistol magnum or small rifle primers and helped control primer flow. The final improvement came with the increased thickness of the cartridge case wall from the web area up to the beginning of the shoulder. This created a cartridge case stronger than the .45 Winchester Magnum cartridge case.
The .40 Super cartridge case was designed for a balance of strength and powder capacity. To maximize bullet pull and overall feeding characteristics, the case has a neck length of .175 in. The shoulder angle is an optimum 25 degrees. The neck yields more precise bullet alignment than can be achieved using a cartridge with a shorter neck. This translates to increased accuracy. The pressure limit for factory .40 Super ammunition from Triton was 37,000 PSI, well below the strength limits of the cartridge case.
The .40 Super drives a 135 grain bullet to 1,800 feet per second while generating less chamber pressure than the 9x23mm Winchester. With a 200-grain bullet, the .40 Super delivers more foot-pounds of energy at 100 yards than the .45 ACP does at the muzzle.
The original plan was to market the .40 Super as the .40 SIG, the big brother to the .357 SIG. The cartridge was introduced in 1996 to Michael Bussard, the assistant to the president of SigArms, and he was interested in the cartridge for use in the P220 pistol. Safari Arms also produced a couple of barrels marked "Triton 10", presumably prior to Triton selecting the .40 Super moniker.
Initial prototype .40 Super brass actually had a headstamp that read, ".45 Colt" with the second batch of prototype cases stamped "45 WinMag". Starline Brass, the manufacturer of the .40 Super cartridge case, used .45 Colt forming dies and later the 45 Win Mag dies. Ultimately the headstamp was updated to read, "Triton .40 Super" and the previous large pistol primer pocket was changed to accept small rifle and pistol primers.
.40 Super case dimensions
Ammunition and handloading
From a reloader standpoint, there was tremendous versatility in the .40 Super. Bullet weights on the market included: 125, 135, 150, 155, 165, 170, 180, 190, 200 and 220 grains. Loads were developed with a dozen powders. Small pistol magnum or small rifle primers could be utilized. Brass was available from both Triton and Starline Brass Company.
Many semi-automatic pistols can accommodate the .40 Super, especially those already chambered for the .45 ACP cartridge are the easiest to convert. This is accomplished by simply swapping out the .45 ACP barrel with the .40 Super barrel and upgrading the recoil spring system with a heavy duty spring. Existing .45 ACP magazines are utilized with no modifications.
Handguns converted to .40 Super include the S&W 4506, Glock 21, Glock 30, SIG P220, FNH FNP-45, FNH FNX-45, HK USP, Tanfoglio Witness and the 1911 Government Model (and its variants). Handguns set up for the .45 Super cartridge only need a barrel swap. Handguns chambered for the .400 Cor-Bon can have their barrels rechambered to .40 Super.Gun World magazine (July 2000ed.). 2000.
Factory-chambered 1911 handguns were introduced by STI. Barrel reamers were produced by Clymer Mfg and Pacific Tool and Gauge. Barrels and conversions were available from Bar-Sto Barrels, Jarvis, Inc., Storm Lake Machine, Cylinder & Slide, Al's Custom, Inc., Morris Custom, LaRocca Gunworks, and EFK Fire Dragon. Reloading dies are available from RCBS and Redding.
.40 Super ballistics comparison
Current status
The .40 Super cartridge lost momentum when Triton Cartridge was sold and later closed. Double Tap Ammo and Underwood Ammo still offer loaded ammunition for the .40 Super. Today brass is still available from Starline Brass Company and DoubleTap. 1911 conversion kits or barrels are no longer available as of 2013; the last known source was Bar-Sto Precision Machine. Lone Wolf Distributors and RockYourGlock still offer conversion barrels for the Glock 21 (for such conversions, the shooter must use a Glock 21 10-round single-stack magazine to ensure reliable feeding; a double-stack 13-round magazine will not feed reliably).
A cartridge, also known as a round, is a type of pre-assembled firearm ammunition packaging a projectile, a propellant substance and an ignition device (primer) within a metallic, paper, or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for convenient transportation and handling during shooting. Although in popular usage the term "bullet" is often used to refer to a complete cartridge, the correct usage only refers to the projectile.
The .40 S&W (10.2x22mm) is a rimless pistol cartridge developed jointly by American firearms manufacturers Smith & Wesson and Winchester in 1990. The .40 S&W was developed as a law enforcement cartridge designed to duplicate performance of the Federal Bureau of Investigation's (FBI) reduced-velocity 10mm Auto cartridge which could be retrofitted into medium-frame semi-automatic handguns. It uses 0.40-inch (10 mm) diameter bullets ranging in weight from 105 to 200 grains.
The .45 ACP, also known as .45 Auto, .45 Automatic, or 11.43×23mm is a rimless straight-walled handgun cartridge designed by John Moses Browning in 1904, for use in his prototype Colt semi-automatic pistol. After successful military trials, it was adopted as the standard chambering for Colt's M1911 pistol. The round was developed due to a lack of stopping power experienced in the Moro Rebellion in places like Sulu. The issued ammunition, .38 Long Colt, had proved inadequate, motivating the search for a better cartridge. This experience and the Thompson–LaGarde Tests of 1904 led the Army and the Cavalry to decide that a minimum of .45 caliber was required in a new handgun cartridge.
The .45 GAP or .45 Glock (11.43×19mm) is a pistol cartridge designed by Ernest Durham, an engineer with CCI/Speer, at the request of firearms manufacturer Glock to provide a cartridge that would equal the power of the .45 ACP, have a stronger case head to reduce the possibility of case neck blowouts, and be shorter to fit in a more compact handgun. The .45 GAP is the first commercially introduced cartridge that has been identified with Glock.
The .357 SIG is a bottlenecked rimless centerfire handgun cartridge developed by the Swiss-German firearms manufacturer SIG Sauer, in cooperation with ammunition manufacturer Federal Premium. The cartridge is used by a number of law enforcement agencies.
The .454 Casull is a firearm cartridge, developed as a wildcat cartridge in 1958 by Dick Casull, Duane Marsh and Jack Fullmer. It was announced in November 1959 by Guns & Ammo magazine. The design is a lengthened and structurally improved .45 Colt case. The wildcat cartridge went mainstream when Freedom Arms brought a single action five-shot revolver chambered in .454 Casull to the retail firearms market in 1983. Ruger followed in 1997, chambering its Super Redhawk in this caliber. Taurus followed with the Raging Bull model in 1998 and the Taurus Raging Judge Magnum in 2010. The .45 Schofield and .45 Colt cartridges can fit into the .454's chambers, but not the other way around because of the lengthened case.
The .45 Colt (11.43×33mmR), is a rimmed, straight-walled, handgun cartridge dating to 1872. It was originally a black-powder revolver round developed for the Colt Single Action Army revolver. This cartridge was adopted by the U.S. Army in 1873 and served as an official US military handgun cartridge for 19 years, before being replaced by the .38 Long Colt in 1892.
The 7.62×25mm Tokarev cartridge is a Soviet rimless bottleneck pistol cartridge widely used in former Soviet states and in China, among other countries. The cartridge has since been replaced in most capacities by the 9×18mm Makarov in Russian service.
A wildcat cartridge, often shortened to wildcat, is a custom cartridge for which ammunition and/or firearms are not mass-produced. These cartridges are often created in order to optimize a certain performance characteristic of an existing commercial cartridge, or may merely be intended as novelty items.
A rim is an external flange that is machined, cast, molded, stamped, or pressed around the bottom of a firearms cartridge. Thus, rimmed cartridges are sometimes called "flanged" cartridges. Almost all cartridges feature an extractor or headspacing rim, in spite of the fact that some cartridges are known as "rimless cartridges". The rim may serve a number of purposes, including providing a lip for the extractor to engage, and sometimes serving to headspace the cartridge.
The .44 Auto Mag pistol (AMP) is a large caliber semi-automatic pistol. It was designed between 1966 and 1971 by the Auto Mag Corporation to make a semi-automatic pistol chambered in .44 AMP.
The .475 Wildey Magnum is a large semi-automatic pistol cartridge designed for big game hunting in the Wildey pistol.
The .400 Corbon (10.2x22mm) is an automatic pistol cartridge developed by Cor-Bon in 1997. It was created to mimic the ballistics of the 10 mm Auto cartridge in a .45 ACP form factor.
A super magnum is a longer and/or more powerful version of a "magnum" cartridge. Although the term "super magnum" typically refers to a handgun cartridge, created by lengthening an existing straight-case design, it can also refer to rifle and shotgun cartridges, such as the .17 Winchester Super Magnum and the 31⁄2" 12 Gauge Super Magnum. In this case, it simply denotes that it is of greater power than existing "magnums" of a similar caliber or gauge, this is comparable to other designations, such as the "Remington Ultra Magnum". The most widespread of these cartridges are the "SuperMag" family of super-magnum handgun cartridges that were proposed and tested by Elgin Gates in the 1970s.
The Guncrafter Industries Model No. 1 is a variant of the widely popular M1911 handgun, modified for the .50 GI cartridge. John Browning's 1911 .45 ACP has been used for many cartridges over the past century. In every instance the cartridge used a bullet with a diameter that was the same or smaller than the original .451". Both the Desert Eagle and the LAR Grizzly have been offered in cartridges of .50 caliber. Both are large cartridges requiring a large, heavy pistol.
The .45 Super / 11.5x22mm is a powerful smokeless powder center fire metallic firearm cartridge developed in 1988 by Dean Grennell, a well-known writer in the firearms field as well as managing editor of Gun World magazine. It is dimensionally similar to the .45 ACP round but has a thicker case wall and is loaded to higher pressures, which offers an average 300 feet per second (91 m/s) improvement in muzzle velocity over the .45 ACP. The cartridge was co-developed by Tom Fergerson and Ace Hindman.
The 6.5mm Creedmoor (6.5×48mm), designated 6.5 Creedmoor by SAAMI, 6.5 Creedmoor by the C.I.P. or 6.5 CM or 6.5 CRDMR for short, is a centerfire rifle cartridge introduced by Hornady in 2007. It was developed by Hornady senior ballistics scientist Dave Emary in partnership with Dennis DeMille, the vice-president of product development at Creedmoor Sports, hence the name. The cartridge is a necked-down modification of the .30 Thompson Center.
The 9×23mm Winchester is a pistol cartridge developed as a joint venture by Winchester Ammunition and Colt's Manufacturing Company. The 9×23mm Winchester has a convoluted development history, but was commercially introduced by Winchester in 1996. Marketed primarily to competition shooters as a replacement for .38 Super for International Practical Shooting Confederation, United States Practical Shooting Association and International Defensive Pistol Association competition, the cartridge failed to find significant market success despite a high-profile introduction.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
