Adomi Bridge

Last updated
Adomi Bridge
Adomi Bridge at Atimpoku.JPG
Adomi Bridge at Atimpoku
Coordinates 6°14′22″N0°05′44″E / 6.23944°N 0.09556°E / 6.23944; 0.09556
CarriesNational Route N2
Crosses Volta River, downstream of the Akosombo Dam
Locale Atimpoku, Eastern Region, Ghana
Official nameAdomi Bridge
Other name(s)Volta Bridge
Maintained by Ghana Highway Authority
Characteristics
Designsilver crescent arch bridge with deck suspended from arch
Total length334 m (1,096 ft)
Width11.9 m (39 ft)
Longest span245 m (804 ft)
History
Designer Sir William Halcrow & Partners
Contracted lead designer William Brown of Freeman Fox & Partners
Constructed by Dorman Long (Bridge and Engineering) Ltd
Fabrication by Cleveland Bridge & Engineering Company
Construction startMarch 1955
Construction endJanuary 1957
Construction cost682 thousand British pounds
Opened25 January 1957;66 years ago (25 January 1957)
Statistics
Daily traffic 2 lanes of vehicular traffic
Location
Adomi Bridge

The Adomi Bridge (originally the Volta Bridge) is a latticed steel arch suspension bridge crossing the Volta River at Atimpoku in Ghana in West Africa. It is the first permanent bridge to span the Volta River, which drains south into the Gulf of Guinea, and is Ghana's longest suspension bridge. It provides the main road passage, just south of the Akosombo Dam, between the Eastern Region and the Volta Region of Ghana. It was opened in 1957 by Kwame Nkrumah, Ghana's first president. The iconic crescent-shaped arch bridge is featured in Ghanaian stamps and currency.

Contents

History

Adomi Bridge under construction in 1957. The N2 in the background links Tema with the Volta Region The National Archives UK - CO 1069-46-41.jpg
Adomi Bridge under construction in 1957. The N2 in the background links Tema with the Volta Region

In 1953 (before the independence of Ghana in 1956 from British colonial rule), the decision was made to build a bridge across the Volta River to replace the overloaded ferry service at Senchi where delays were occasionally up to a few days. Reconnaissance indicated a good site for a single-span crossing about 800 ft long at a narrow neck of the river at Adomi, about 2.5 miles upstream of the ferry and closer to the then-projected dam and power station in the Volta River Project. Several sketch designs for an arch bridge or a suspension bridge at Adomi and other sites were drawn and cost estimates were developed. The Standing Development Committee chose the single-span arch at Adomi. [1]

Plague commemorating 1957 opening by Kwame Nkrumah Volta Bridge plague.jpg
Plague commemorating 1957 opening by Kwame Nkrumah

Aesthetically the arch was the perfect complement to the trough of the valley... and the silver colour proposed for the steelwork would offset the green of the hills against which it would be seen. --Scott and Roberts (1958) [1]

In Fall 1953 the consulting engineers were appointed: Sir William Halcrow & Partners were the project administrators and designed all approach roads and spans, while Freeman Fox & Partners were to design the single-span arch bridge. A year later, tenders were invited for the complete project, including approach roads, the arch bridge and approach spans. By January 1955, the contracts were settled and some construction staff began to arrive on site. Dorman Long (Bridge and Engineering) Ltd was the main construction contractor and Cleveland Bridge & Engineering Company was the steelwork fabricator. Work on the bridge began in March 1955, with the steel parts being prefabricated in the United Kingdom, while concrete works for the approach spans and the bridge abutments were carried out on site. The prefabricated parts were fully welded, but almost all on-site steelwork erections were designed as bolted connections, including those of the upper and lower chord of the crescent-shaped arch. The concrete carriageway was built after the steelwork was completed for the arch and the deck. By January 1957 the project was substantially completed. The total cost of the completed project was 682 thousand British pounds. [1]

Design of arch bridge

Adomi Bridge steel arch supporting two-lane roadway Adome Bridge, River Volta, Ghana.jpg
Adomi Bridge steel arch supporting two-lane roadway

The single-span arch bridge was designed by William Brown of the engineers' Freeman Fox & Partners. It is a two-hinged silver latticed steel crescent-shaped arch bridge with a two-lane road deck suspended by cables. [2] The lower-chord arch rises 158.5 ft (48.3 m) above the hinges and the main span is 805 ft (245 m) long. To make an aesthetically pleasing crescent-shaped arch, the lower curve formed by the lower chords is a parabola, and the upper curve is derived from it by offsets decreasing logarithmically from the center to the hinges. [1]

As the roadbed is suspended by means of vertical cable stays (hangers) connected to the steel truss arch, the bridge can be considered as a hybrid arch suspension type. [3] Pairs of vertical cables or hangers are attached at 35-ft intervals to the deck transverse beams, which, along with six longitudinal stringer beams and bracers in between the transverse beams, support the weight of the roadway and its load. [1] [4]

The bridge was officially opened on 25 January 1957 by Kwame Nkrumah, then Prime Minister of the Gold Coast and first President of Ghana. [5] It carries the National Route N2 and has been of tremendous help to travelers and traders who use the road to access the east and north regions of Ghana.

Route to the bridge

The Adomi Bridge is located in Atimpoku in the Eastern Region of Ghana, which is along the Volta River. The bridge carries National Route N2 and connects parts of the Eastern Region and Juapong in the North Tongu District, Ho, Hohoe, and other towns in the Volta Region. A trip from the northern regions of Ghana on N2 would go through the eastern corridor and finally use the Adomi Bridge to cross the Volta River. The bridge is about 87 km (54 mi) northeast of Accra, the capital of Ghana, and about 75 km (47 mi) north of the port of Tema. [6]

Rehabilitation works

Tourist Site

In April 2019, Adomi Bridge was classified as a tourist site after a consensus between the Asuogyaman District, Ghana Highway Authority and Ghana Tourism Development Company (GTDC). [12]

Related Research Articles

<span class="mw-page-title-main">Cable-stayed bridge</span> Type of bridge with cables directly from towers

A cable-stayed bridge has one or more towers, from which cables support the bridge deck. A distinctive feature are the cables or stays, which run directly from the tower to the deck, normally forming a fan-like pattern or a series of parallel lines. This is in contrast to the modern suspension bridge, where the cables supporting the deck are suspended vertically from the main cable, anchored at both ends of the bridge and running between the towers. The cable-stayed bridge is optimal for spans longer than cantilever bridges and shorter than suspension bridges. This is the range within which cantilever bridges would rapidly grow heavier, and suspension bridge cabling would be more costly.

<span class="mw-page-title-main">William Jolly Bridge</span> Bridge in Queensland, Australia

The William Jolly Bridge is a heritage-listed road bridge over the Brisbane River between North Quay in the Brisbane central business district and Grey Street in South Brisbane, within City of Brisbane, Queensland, Australia. It was designed by Harding Frew and built from 1928 to 1932 by MR Hornibrook.

<span class="mw-page-title-main">Arch bridge</span> Bridge with arch-shaped supports

An arch bridge is a bridge with abutments at each end shaped as a curved arch. Arch bridges work by transferring the weight of the bridge and its loads partially into a horizontal thrust restrained by the abutments at either side. A viaduct may be made from a series of arches, although other more economical structures are typically used today.

<span class="mw-page-title-main">Cantilever bridge</span> Bridge built using cantilevers

A cantilever bridge is a bridge built using structures that project horizontally into space, supported on only one end. For small footbridges, the cantilevers may be simple beams; however, large cantilever bridges designed to handle road or rail traffic use trusses built from structural steel, or box girders built from prestressed concrete.

<span class="mw-page-title-main">Pennybacker Bridge</span> Bridge in Austin, Texas

The Percy V. Pennybacker Jr. Bridge in Austin, Texas, is a through-arch bridge across Lake Austin which connects the northern and southern sections of the Loop 360 highway, also known as the "Capital of Texas Highway." The road is widely considered one of the most scenic urban drives in Texas, in large part due to this arched weathering-steel bridge and the rolling hills that flank the road. In 2001, 48,000 vehicles crossed the bridge daily. Ten years prior to this, 22,000 vehicles had crossed the bridge daily.

<span class="mw-page-title-main">Howrah Bridge</span> Cantilever bridge in Kolkata, India

The Howrah Bridge is a balanced cantilever bridge over the Hooghly River in West Bengal, India. Commissioned in 1943, the bridge was originally named the New Howrah Bridge, because it replaced a pontoon bridge at the same location linking the cities of Howrah and Kolkata (Calcutta). On 14 June 1965, it was renamed Rabindra Setu after the Bengali poet Rabindranath Tagore, who was the first Indian and Asian Nobel laureate. It is still popularly known as the Howrah Bridge.

William Christopher Brown OBE was an English structural engineer and bridge designer who specialised in suspension bridges. He is credited with the idea of designing bridge decks with an aerofoil-shaped cross section for stability in a wide variety of wind conditions.

<span class="mw-page-title-main">Chepstow Railway Bridge</span> Bridge spanning the River Wye between England and Wales

<span class="mw-page-title-main">Roberto Clemente Bridge</span> Bridge in Pittsburgh, Pennsylvania, United States

The Roberto Clemente Bridge, also known as the Sixth Street Bridge, spans the Allegheny River in downtown Pittsburgh, Pennsylvania, United States.

<span class="mw-page-title-main">Hampden Bridge, Kangaroo Valley</span> Bridge in New South Wales, Australia

Hampden Bridge is a heritage-listed single-span suspension bridge that carries Moss Vale Road (B73) across the Kangaroo River, in Kangaroo Valley, in the City of Shoalhaven local government area of New South Wales, Australia. The bridge was designed by Ernest de Burgh and built by Loveridge and Hudson. The property is owned by Transport for NSW. It was added to the New South Wales State Heritage Register on 2 August 2019.

<span class="mw-page-title-main">Svinesund Bridge</span> Bridge in Swedish municipality of Strömstad, Norwegian municipality of Halden

The Svinesund Bridge is a through arch bridge crossing Iddefjord at Svinesund, and joining Sweden and Norway. Svinesund is a sound separating the Swedish municipality of Strömstad from the Norwegian municipality of Halden, and thus it is the border between Norway and Sweden in this region. The bridge is the westernmost border crossing between the two countries and carries the European route E6 which is a major traffic route in the area, connecting Oslo and the rest of Norway with Gothenburg, Malmö, Copenhagen and the rest of Europe.

<span class="mw-page-title-main">Tied-arch bridge</span>

A tied-arch bridge is an arch bridge in which the outward horizontal forces of the arch(es) caused by tension at the arch ends to a foundation are countered by equal tension of its own gravity plus any element of the total deck structure such great arch(es) support. The arch(es) have strengthened chord(s) that run to a strong part of the deck structure or to independent tie-rods below the arch ends.

<span class="mw-page-title-main">Maria Pia Bridge</span> Bridge in Porto/Vila Nova de Gaia, Portugal

The Maria Pia Bridge is a railway bridge built in 1877, and attributed to Gustave Eiffel, situated over the Portuguese northern municipalities of Porto and Vila Nova de Gaia.

<span class="mw-page-title-main">Mythe Bridge</span> Bridge in Tewkesbury, Gloucestershire

Mythe Bridge carries the A438 road across the River Severn at Tewkesbury. It is a cast-iron arch bridge spanning 170 feet (52 m) and 24 feet (7.3 m) wide, designed by Thomas Telford and completed in April 1826. It is a Grade II* listed structure.

<span class="mw-page-title-main">Network arch bridge</span>

A network arch bridge is a tied arch bridge with inclined hangers that cross each other at least twice.

<span class="mw-page-title-main">La Vicaria Arch Bridge</span> Bridge in Yeste, Albacete

La Vicaria Bridge is a through arch bridge that spans the Segura River, where it meets La Fuensanta Reservoir near Yeste, in the province of Albacete, Spain. It forms part of a future road that will join Yeste with Letur and the neighbouring area to the east. The bridge has 2 vehicle lanes and 2 sidewalks.

The Alexandra Bridge is a steel arch bridge across the Fraser River in the lower Fraser Canyon area of southwestern British Columbia, Canada. The two-lane crossing, carrying BC Highway 1, is by road about 44 kilometres (27 mi) north of Hope and 66 kilometres (41 mi) south of Lytton.

<span class="mw-page-title-main">Deck (bridge)</span> Surface of a bridge

A deck is the surface of a bridge. A structural element of its superstructure, it may be constructed of concrete, steel, open grating, or wood. Sometimes the deck is covered by a railroad bed and track, asphalt concrete, or other form of pavement for ease of vehicle crossing. A concrete deck may be an integral part of the bridge structure or it may be supported with I-beams or steel girders.

Senchi is a town in the Asuogyaman District of the Eastern Region of Ghana.

<span class="mw-page-title-main">Long Gully Bridge</span> Bridge across Flat Rock Creek in Sydney, Australia

The Long Gully Bridge, also known as Northbridge, Suspension Bridge, and Cammeray Bridge, is a concrete arch road bridge that carries Strathallen Avenue across Flat Rock Creek and Tunks Park, and connects the suburbs of Cammeray, in the North Sydney Council local government area to its south, with Northbridge in the City of Willoughby local government area to its north, in Sydney, New South Wales, Australia.

References

  1. 1 2 3 4 5 Scott, Peter Adamson; Roberts, Gilbert. "The Volta Bridge". Institute of Civil Engineers Virtual Library. Proceedings of the Institution of Civil Engineers, E-ISSN 1753-7789, Volume 9, Issue 4, April 1958, pp. 395-432. Retrieved 2 August 2020.
  2. "Adome Bridge (1957) Structurae". en.structurae.de. 2012. Retrieved April 24, 2012.
  3. "A mathematical model of a suspension bridge – case study: Adomi bridge, Atimpoku, Ghana" (PDF). Global Advanced Research Journals. Global Advanced Research Journal of Engineering, Technology and Innovation Vol. 1(3) pp. 047-062, June, 2012. Retrieved 2 August 2020.
  4. 1 2 Ohemeng, Yaw 'Frank' (24 July 2008). "Adomi Bridge – Possible Causes and Potential Repairs". Modern Ghana. Retrieved 2 August 2020.
  5. "Volta Bridge and Lake, Ghana". john-knapton.com. Retrieved 2 August 2020.
  6. "Routes to Adomi Bridge". dearghana.com. Archived from the original on 28 January 2015. Retrieved 23 January 2015.
  7. 1 2 3 Eitelberger, Johannes; Herrmann, P; Widmann, M (September 2015). "Rehabilitation of the Adomi Bridge in Ghana". researchgate.net. Proceedings of the International Symposium on Steel Bridges. Retrieved 2 August 2020.
  8. "Photographs of the Adomi Bridge, April 2016". Independent Travellers. independent-travellers.com. Retrieved September 18, 2017.
  9. "Adomi bridge to be closed down Monday". myjoyonline.com. Retrieved 10 March 2014.
  10. "Adomi bridge rehabilitation 80% complete". ghana-net.com. 26 July 2015. Retrieved 2 August 2020.
  11. "Mahama gets first ride on 'new' Adomi bridge" . Retrieved 4 February 2018.
  12. "Adomi Bridge now classified as tourist site". Myjoyonline. Myjoyonline. Retrieved 28 April 2019.