Aeronca Champion

Last updated

Model 7 Champion
Aeronca.7ac.champion.kemble.arp.jpg
Aeronca 7AC Champion over Kemble, Gloucestershire, England
RoleLight utility aircraft / trainer [1] [2] [3] [4] [5]
Manufacturer Aeronca
Champion Aircraft
Bellanca
American Champion Aircraft
Designer Ray Hermes [1] [2] [4]
First flightApril 29, 1944 [3]
IntroductionNovember 1945
StatusProduction completed
Primary usersprivate owners
flight schools, aircraft rental services, United States Air Force, Air National Guard
U.S. Army
Civil Air Patrol [1] [2] [3] [4] [5]
Produced1946–1951 [1] [3] [4]
2007–2018
Number builtmore than 10,000, all manufacturers and variants
(over 7,200 Aeronca 7AC Champion, 1945–1948) [1] [3] [4] [6]
Developed from Aeronca L-3, Aeronca T, Aeronca Defender, Aeronca 50 Chief [1]
Variants Aeronca L-16 [1] [3] [4] [5] [7]
Developed into Citabria, Champion Lancer [4] [5]
Aeronca 7AC Champion on skis Aeronca7ACChampC-GDZO.JPG
Aeronca 7AC Champion on skis
Champion 7FC Tri-Traveller at the Canadian Museum of Flight AeroncaTriChamp01A.JPG
Champion 7FC Tri-Traveller at the Canadian Museum of Flight

The Aeronca Model 7 Champion, commonly known as the "Champ", or "Airknocker", [3] [5] [7] [8] is a single-engine light airplane with a high wing, generally configured with fixed conventional landing gear and tandem seating for two occupants.

Contents

Designed for flight training [5] [9] and personal use—and specifically developed to compete with the popular Piper Cub. It entered production in the United States in 1945, spawning one of the most popular, and longest-produced, light airplane models in the world. [1] [2] [5] [7] [10] [11]

In addition to the Champ's large-volume production by Aeronca Aircraft, it was revived in variations by the Champion Aircraft Company in the 1950s and 1960s, and then again in further variants by Bellanca in the 1960s and 1970s, and by American Champion Aircraft in the early 2000s. [5] [7] [8] [10] [11]

To take advantage of the new light-sport aircraft (LSA) category, the Champion was returned to production in 2007, [12] [13] [14] but was discontinued by mid-2019. [15]

Design and development

The Aeronca 7 Champion line—developed in the mid-1940s as a post-World War II response to the popular Piper J-3 Cub—uses similar design features (already featured in Aeronca's wartime designs, the Aeronca Model T, Aeronca Defender, and Aeronca L-3), but also incorporates aspects of traditional Aeronca designs, including the internal main trusswork of the fuselage frame. Like its predecessors and initial rivals, the high-wing, two-seat plane has tandem seating, conventional landing gear (tailwheel-equipped), and a small piston engine. [1] [2] [4] [16]

As with many light aircraft of the time, the Champ's fuselage and tail surfaces are constructed of welded metal tubing. The outer shape of the fuselage is created by a combination of wooden formers and longerons, covered with fabric. The cross-section of the metal fuselage truss is triangular, a design feature which can be traced all the way back to the earliest Aeronca C-2 design of the late 1920s. [1] [4] [16]

The strut-braced wings of the Champ are, like the fuselage and tail surfaces, fabric-covered, and use aluminum ribs. Most Champs were built with wooden spars. American Champion has been using aluminum spars in the aircraft it has produced, and has also made the aluminum-spar wings available for retrofit installation on older aircraft. [17]

Like the Piper Cub with which it competed, the Champ features tandem seating. However, while the J-3 model of the Cub is flown solo from the rear seat, the Champ can be soloed from the front, giving improved forward visibility, particularly on the ground and during takeoffs, landings, and climbs. The Champ offers far better visibility than the Cub, allowing 300 degrees of visibility to a front-seated pilot, and has a wider cabin than the Cub. [4] [16] [18] [19] Additionally, an uncommon [6] Champ variant—the 7HC—was produced with an enlarged rear seat allowing two passengers to be carried. [20]

The landing gear of most Champs is in a conventional arrangement, though two variants with tricycle gear were produced, and a model with reversed tricycle gear was tried. [6] Conventional-gear Champs feature a steerable tailwheel and most have steel tube main gear which use an oleo strut for shock absorption. [16] One variant utilized sprung-steel main gear, and American Champion uses aluminum gear legs in its production model of the Champ. Tricycle-gear Champs use the steel tube and oleo strut main gear, mating these with an oleo strut nose gear. [21]

Models 7AC, 7CCM, 7DC, and 7EC were approved as floatplanes, with the addition of floats and vertical stabilizer fins; the floatplane versions were designated the S7AC, S7CCM, S7DC, and S7EC, respectively. The 7GC and 7HC may also be operated with floats but are not given a special designation in this configuration. All floatplane versions have increased gross weights over the corresponding landplanes. [22]

Operational history

Built by Aeronca Aircraft Corporation, the Champ first flew in 1944, and entered production in 1945. As an economical postwar rival to the Piper Cub (which it largely improved upon), the Champ was popular with training schools who were training veterans returning from World War II, by the thousands, with government funding through the G.I. Bill. [5] [7] [23]

The original model 7AC Champion initially sold by the thousands, peaking in 1946, as Aeronca developed the highest-volume production line in general aviation. Between 1946 and 1947, Aeronca was producing an average 30 light aircraft per day (peaking at 50 per day at one point). But 1946 was a momentary explosion in lightplane production, industry-wide. The postwar boom-and-bust of the late 1940s and early 1950s brought an abrupt end to the massive sales, and—like the rest of the U.S. lightplane industry—Aeronca production dropped to a small fraction of 1946–1947 sales. [1] [23]

Engine upgrades in 1947, 1948 and 1949 resulted in the Models 7BCM, 7DC and the electric-system-equipped 7EC, all distinguished from the 7AC by a larger vertical tail than predecessors, to compensate for the greater torque and p-factor of the larger engines. [1] [2] [3] [4] [24]

Some of these Champ variants were acquired by the U.S. Army Air Forces (USAAF) and its successor, the U.S. Air Force (USAF), particularly for use by the U.S. Army Ground Forces and the National Guard, as replacements for the Piper L-4 variant of the Piper Cub, used as an observation and liaison aircraft. The Aeronca Champ military variants were labeled L-16, L-16A and L-16B. [3] [4] [25]

By the time production ended in 1951, the company had sold more than 8,000 Champions, mostly 7AC Champs (approx. 7,200). [1] [2] [3] [5] [16] [24]

Aeronca ceased all production of light aircraft in 1951, and the Champ design was sold in 1954 to Champion Aircraft, who continued production of some of the more advanced variants of the Champ, from the 1950s into the early 1960s—gradually modifying them into the aerobatic Champion Citabria. [1] [2] [5]

Champion Aircraft was acquired in 1970 by Bellanca Aircraft which continued production of their Champ-derived Citabria and Decathlon designs.

In 1971, Bellanca introduced the 7ACA version of the Champ as a more basic complement to their other designs, as the least expensive, and lowest-performance, commercially produced light plane on the market at the time. [8] [11] [26]

Only a handful of 7ACAs were built between 1971 and 1972. Bellanca ceased all production in the early 1980s. [1] [2]

Jabiru powered prototype JabiruChamp.jpg
Jabiru powered prototype

American Champion Aircraft Corporation acquired the Champ and related designs in 1989. In 2001, they were rumored to be considering a reintroduction of the Champ design as a 7EC powered by a Jabiru Aircraft engine. While a test version was flown, this combination was not put into production. With the creation of the light-sport aircraft (LSA) category of aircraft in the United States by the FAA, American Champion in late 2007 began producing a revised version of the 7EC powered by the 100 hp (75 kW) Continental O-200-A. The new production aircraft are type certified, but also qualify to be flown by sport pilots in the United States. [12] [13] Although the fuselage and cowling contours are similar to the original-production models, the new aircraft used the windows, interior, door, and windscreen of the modern Citabria. [27] Fuel capacity was reduced to 18 US gal (68 L; 15 imp gal) to conserve weight; despite this measure and various others, such as the use of aluminum landing gear legs and bare birch floorboards rather than carpet, the aircraft's payload is inadequate to carry two adults and full fuel simultaneously. The manufacturer was considering various further weight-reduction measures including the use of the lightened Continental O-200D engine previously offered in the Cessna 162 Skycatcher. [27] However, the revived 7EC was dropped from production by mid-2019. [15]

Standard-production 7AC, 7BCM (L-16A), 7CCM (L-16B), 7DC, and 7ACA models qualify as U.S. Light Sport Aircraft. [28] Only those specific original-production 7EC airplanes certificated at a 1,300 lb (590 kg) gross weight qualify for the LSA category; [28] a standard original-production 7EC is certificated at a gross weight of 1,450 lb (660 kg) and does not qualify. [29]

Variants

Various versions of the Champ have been tested and produced since 1944, including military, aerobatic, cropduster, tricycle-gear and (as the 402 Lancer) a twin-engined variant. [2] [4] [5]

The derivative Citabria designs — models 7ECA, 7GCAA, 7GCBC, and 7KCAB — are discussed in a separate article, as is the twin-engined 402 Lancer. Floatplane variants are designated by an "S" prefix and are discussed together with the standard respective land variant.

7AC Champion

Aeronca 7AC Champion Aeronca 7ac champion g-bpfm 1946 arp.jpg
Aeronca 7AC Champion

Introduced in 1945, the 7AC Champion ("Champ") was the first (and, by far, the most popular) version of the design. It used the Continental A-65-8 engine of 65 horsepower (48 kW). [30] (Other 65-hp engines by Lycoming and Franklin were also fitted.)[ citation needed ] A supplemental type certificate allows the installation of a Lycoming O-235. [31] The Champ featured a conventional landing gear configuration, with shock absorption in the main gear provided by oleo struts. The aircraft had no electrical system. It is distinguishable from nearly all other variants by the absence of a dorsal fin at the leading edge of the vertical tail (most later models had the enlarged tail). Approximately 7,200 were built between 1945 and 1948—far outnumbering all other subsequent variants combined, and far outnumbering most rival designs of the period. Some were acquired by the U.S. military and designated L-16—not to be confused with the L-16A and L-16B derived from later Champ variants. [1] [3] [5] [11] [16] Gross weight is 1,220 lb (550 kg) for the standard 7AC and 1,320 lb (600 kg) when configured as an S7AC floatplane; fuel capacity for either version is 13 US gal (49 L; 11 imp gal) in a single tank. [30] [32]

7ACA

1971 reintroduction by Bellanca, a modernized version of the design which made it a variant of the Citabria line. The 7ACA is powered by the two-cylinder Franklin 2A engine of 60 horsepower (45 kW); Gross weight is 1,220 lb (550 kg). [33] 71 were produced. [6]

7BCM, L-16A

7BCM Champion Aeronca 7bcm champion g-timp 1946 arp.jpg
7BCM Champion

Upgraded version introduced in 1947 with an 85 horsepower (63 kW) Continental C85 [32] and "no-bounce" version of the main landing gear.[ dubious ] All of the 7BCM production went to the military as model L-16A. Gross weight and fuel capacity are unchanged from the 7AC. [32] 509 were built. [6]

Aeronca L-16 Aeronca L-16 7BCM 140719a.jpg
Aeronca L-16

7B-X

Prototype, 1 produced, serial number 7-BX-1, FAA aircraft registration number was N4084E but registration was canceled on 4 October 1951, no other details known. [6] [34]

7CCM, L-16B

An improved version of the L-16, the L-16B/7CCM featured a 90 hp (67 kW) Continental C90-8 engine, an enlarged vertical tail, hydraulic brakes, and a gross weight increase to 1,300 lb (590 kg); an additional gross weight increase to 1,350 lb (610 kg) is allowed when "Long Stroke Oleo Landing Gear" is installed and placard, "Intentional spinning prohibited when baggage carried", is installed on the instrument panel. [35] An additional 5.5 US gal (21 L; 4.6 imp gal) fuel tank is used, increasing total fuel capacity to 18.5 US gal (70 L; 15.4 imp gal). [35] Gross weight increases to 1,400 lb (640 kg) when configured as an S7CCM floatplane. [36] 100 L-16B/7CCM aircraft were built. [6]

Aeronca 7DC Aeronca 7DC (N42344).jpg
Aeronca 7DC

7DC

Similar to 7CCM but with Continental C85 engine of 85 hp (63 kW); the derived S7DC floatplane had a gross weight increase to 1,400 lb (640 kg). [37] 100 7DC aircraft were produced. [6]

7EC Traveler

1950 brought the introduction of the Aeronca 7EC, which features a Continental C90-12F engine of 90 horsepower (67 kW), [36] standard long-throw oleo strut main gear, thicker seat cushions, additional interior insulation for noise reduction, an improved heater and electrical system, the addition of a parking brake, and a change in center of gravity for enhanced speed. Advertised empty weight is 890 lb (400 kg). [21] Standard gross weight is 1,450 lb (660 kg), or 1,300 lb (590 kg) with "Lower End Landing Gear Oleo Strut Assembly." [36] Standard fuel capacity is unchanged from the 7DC; [36] an optional 26 US gal (98 L; 22 imp gal) system was offered, increasing the manufacturer's empty weight by 30 lb (14 kg). [38] The optional S7EC floatplane configuration has a gross weight of 1,474 lb (669 kg). [39]

The last Champ produced at Aeronca was a 7EC, and when Champion reintroduced the Champ in 1955, it was with their version of the 7EC, very little changed from Aeronca's. An enhanced version called the Champion DeLuxe Traveler offered a metal propeller with spinner, wheel pants, a steerable tailwheel, and navigation lights. [21]

773 7EC aircraft were produced during the original production run. [6]

In late 2007, American Champion introduced a revised version of the 7EC, featuring the Continental O-200-A engine of 100 horsepower (75 kW). [40] Differing in a number of ways from earlier 7ECs, this new version in particular replaced the wood-spar wings of the earlier versions with a metal-spar wing and used aluminum gear legs. To fit within the Light Sport requirements, the maximum weight was reduced to 1,320 pounds (599 kilograms). [12] [13] The aircraft was discontinued by mid-2019. [15]

7FC Tri-Traveler

Champion 7FC Tri-Traveller AeroncaChampion7-FCTri-ChampC-FNMB.JPG
Champion 7FC Tri-Traveller

In 1957, Champion brought out the 7FC, which is similar to the 7EC but with tricycle landing gear instead of conventional (tailwheel) gear, oleo struts on all 3 wheels, and extra frame bracing for the nosewheel. Factory standard equipment was comparable to the 7EC DeLuxe Traveler. The 7FC is 3 mph (4.8 km/h) slower and 90 lb (41 kg) heavier than an equivalent 7EC, [21] with a standard useful load of 540 lb (245 kg), compared with 630 lb (286 kg) for the 7EC; both use the 90 hp (67 kW) Continental C90-12F engine. [41] Standard gross weight of the 7FC is 1,450 lb (660 kg) with an increase to 1,500 lb (680 kg) allowed with the installation of "Wide Track Main Gear." [42]

1957 7FC Aeronca7FC.jpg
1957 7FC

472 7FC aircraft were built. [6]

7GC Sky Trac

Generally similar to 7EC but with a 140 hp (104 kW) Lycoming O-290-D2B engine and modified fuselage structure for increased gross weight. [43] [44] Gross weight is 1,650 lb (750 kg) in standard configuration, 1,732 lb (786 kg) in seaplane configuration. [43] 171 were produced. [6]

7GCA Sky Trac

Agricultural variant of the 7GC with identical gross weight but with a 150 hp (112 kW) Lycoming O-320-A2B engine. [20] 396 were made. [6]

7GCB Challenger?

7HC DX'er

Similar to 7GC with identical gross weights for landplane and floatplane versions, but with a front seat control yoke instead of a control stick, modified fuselage structure, tricycle landing gear, and an enlarged rear seat for two occupants. [20] 39 were produced. [6]

7JC Tri-Con

Similar to 7EC but with reverse tricycle undercarriage; however, the aircraft may be converted to a standard tailwheel undercarriage and operated at a 1,500 lb (680 kg) gross weight. [45] 25 were built. [6]

7KC Olympia

7GCA with smaller wings, redesigned empennage, other aerodynamic refinements, deletion of rear-seat flight controls, and minor detail changes. [46] 4 were built. [6]

Specifications (7AC)

Aeronca 7AC Champion on floats Aeronca 7AC Champion AN1179954.jpg
Aeronca 7AC Champion on floats

Data from FAA Type Certification Data Sheet, Plane & Pilot and Montgomery [30] [47] [48]

General characteristics

Performance

See also

Related development

Aircraft of comparable role, configuration, and era

Notes

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Harris, Richard, "Aeronca: Birth of the Personal Plane Archived 2010-07-22 at the Wayback Machine ," AAHS Journal, Summer 2007, vol.52, #2, American Aviation Historical Society
  2. 1 2 3 4 5 6 7 8 9 10 Harris, Richard, "Aeronca/Champion History: Beyond the Bathtub – Chiefs, Champs & Citabrias," from articles first appearing in In Flight USA, 2003–2004, condensed on author's website.
  3. 1 2 3 4 5 6 7 8 9 10 11 Aerofiles.com, "Aeronca" page, Aircraft section, retrieved Feb. 22, 2016
  4. 1 2 3 4 5 6 7 8 9 10 11 12 13 Davisson, Budd. "Comparing the Classics: The Aeronca Champ," EAA/Sport Aviation, June, 1997, Experimental Aircraft Association, as reproduced on the author's website, retrieved 2016-02-01
  5. 1 2 3 4 5 6 7 8 9 10 11 12 13 Ethell, Jeffrey, Used Aircraft Guide, 1979, Charles Scribner's Sons, NY
  6. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Simpson 1991, p. 13.
  7. 1 2 3 4 5 Flying staff, "Pilot Report: Bellanca Champ]," Flying Annual & Pilots' Guide, 1971 ed. [Ziff-Davis], NY
  8. 1 2 3 Bellanca Aircraft Corp, "[ad: "The Champ only $4,995"]," Flying Annual & Pilots' Guide, 1971 ed., pp.36–37 [Ziff-Davis], NY
  9. Flying Dec. 1946, as quoted in Flying Annual & Pilots' Guide,' 1971 ed. [Ziff-Davis], NY'
  10. 1 2 "[The Big 10]," (planes in production longest) sidebar, Air & Space Smithsonian Feb. 1996, vol.10#6, p.48.
  11. 1 2 3 4 Wilkinson, Stephan, "First Flight: The Champ," Flying, February 1971: [Ziff-Davis], NY, as retrieved 2016-01-30 from Google Books, and as reproduced in print edition of Flying Annual & Pilots' Guide, 1971 ed., Ziff Davis, NY.
  12. 1 2 3 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011–12, page 24. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  13. 1 2 3 Experimental Aircraft Association (2012). "American Champion Aircraft 7EC" . Retrieved April 30, 2012.
  14. Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015–16, page 28. Flying Pages Europe SARL, 2015. ISSN   1368-485X
  15. 1 2 3 "American Champion Aircraft Corporation: Champ". americanchampionaircraft.com. American Champion Aircraft Corporation. Archived from the original on June 5, 2019. Retrieved June 5, 2019. Discontinued: was a great run!
  16. 1 2 3 4 5 6 Sargent, Sparky Barnes, "A Honey of a Champion! The Baker family's award-winning Aeronca," Vintage Airplane, Dec., 2007, vol.35, #12, Experimental Aircraft Association
  17. "Retrofit Metal Spar Wings". americanchampionaircraft.com. Retrieved March 30, 2017.
  18. Davisson, Budd. "Flight Reports: The Aeronca Champ". Experimental Aircraft Association. Retrieved January 7, 2008.
  19. Karant, Max, "Flying Check Pilot: The Aeronca Chief Archived 2009-10-27 at the Wayback Machine ," Flying Magazine, Dec., 1946.
  20. 1 2 3 Aircraft Specification A-759 2011, p. 8.
  21. 1 2 3 4 Whitman, Ray (February 1958). "Cockpit Test Report On a Plane You Can Afford... The Champion Traveler". Science and Mechanics: 90–92.
  22. Aircraft Specification A-759 2011, pp. 3–7.
  23. 1 2 Smith, Frank Kingston, "The Turbulent Decade," (history of U.S. aviation from the mid-1940s to the mid-1950s), Flying Magazine 50th Anniversary Edition, September 1977, pp.200–208; as photocopied at Google Books, retrieved Feb. 2016.
  24. 1 2 "The Champ Still Slugging Away". Flying Magazine: 65. April 1973.
  25. Air Training Department, The Artillery School, U.S. Army, "The New Grasshopper—L-16 Archived September 21, 2018, at the Wayback Machine ," (semi-official U.S. Army tutorial written to guide pilots transitioning from the Piper L-4 to the Aeronca L-16) The Field Artillery Journal, Nov–Dec 1947, United States Army,
  26. ,"1971 Aircraft Directory," Flying Annual & Pilots' Guide, 1971 ed., special section [Ziff-Davis], NY
  27. 1 2 "Let's Go Flying! CHAMP 7EC LIGHT SPORT AIRCRAFT". Aircraft Owners and Pilots Association . Retrieved October 9, 2014.
  28. 1 2 "Standard Category Aircraft Listing". Experimental Aircraft Association. Archived from the original on October 17, 2014. Retrieved October 9, 2014.
  29. "SP/LSA Movement At The Crossroads: Assessing The Impact of The EAA/AOPA Joint Petition For 3rd Class Medical Certificate Exemption". MidwestFlyer.com. February 17, 2012. Retrieved October 9, 2014.
  30. 1 2 3 Aircraft Specification A-759 2011, p. 1.
  31. Aircraft Specification A-759 2011, p. 1 and p. 23.
  32. 1 2 3 Aircraft Specification A-759 2011, p. 2.
  33. Aircraft Specification A-759 2011, p. 16.
  34. Federal Aviation Administration (November 21, 2018). "N Number Inquiry Inquiry Results, N4084E" . Retrieved November 21, 2018.
  35. 1 2 Aircraft Specification A-759 2011, p. 3.
  36. 1 2 3 4 Aircraft Specification A-759 2011, p. 5.
  37. Aircraft Specification A-759 2011, pp. 3–4.
  38. Aircraft Specification A-759 2011, p. 6 and p. 23.
  39. Aircraft Specification A-759 2011, p. 6.
  40. Aircraft Specification A-759 2011, p. 37.
  41. Champion Operating and Service Manual (1957 ed.). Oscaola Wisconsin USA: Champion Aircraft Corporation. 1957. pp. 2, 56.
  42. Aircraft Specification A-759 2011, pp. 6–7.
  43. 1 2 Aircraft Specification A-759 2011, p. 7.
  44. Flying Magazine: 71. January 1959.{{cite journal}}: CS1 maint: untitled periodical (link)
  45. Aircraft Specification A-759 2011, p. 9 and p. 35.
  46. Aircraft Specification A-759 2011, p. 10.
  47. Plane and Pilot: 1978 Aircraft Directory, page 12. Werner & Werner Corp, Santa Monica CA, 1977. ISBN   0-918312-00-0
  48. Montgomery, M.R. and Gerald Foster: A Field Guide to Airplanes, Second Edition, pages 64–65. Houghton Mifflin Company, 1992. ISBN   0-395-62888-1

Related Research Articles

<span class="mw-page-title-main">Cessna 182 Skylane</span> American light aircraft

The Cessna 182 Skylane is an American four-seat, single-engined light airplane built by Cessna of Wichita, Kansas. It has the option of adding two child seats in the baggage area.

<span class="mw-page-title-main">Continental O-200</span>

The Continental C90 and O-200 are a family of air-cooled, horizontally opposed, four-cylinder, direct-drive aircraft engines of 201 in³ displacement, producing between 90 and 100 horsepower.

<span class="mw-page-title-main">Aeronca Aircraft</span>

Aeronca, contracted from Aeronautical Corporation of America, located in Middletown, Ohio, is a US manufacturer of engine components and airframe structures for commercial aviation and the defense industry, and a former aircraft manufacturer. From 1928 to 1951, the company was a major producer of general aviation aircraft, and also produced the engines for some of their early designs.

<span class="mw-page-title-main">Taylorcraft B</span> American monoplane

The Taylorcraft B is an American light, single-engine, high-wing general aviation monoplane, with two seats in side-by-side configuration, that was built by the Taylorcraft Aviation Corporation of Alliance, Ohio.

<span class="mw-page-title-main">Bellanca Cruisair</span> American single-engined light aircraft

The Bellanca 14-7 Cruisair and its successors were a family of single-engined light aircraft manufactured in the United States from the mid-1930s onwards.

<span class="mw-page-title-main">American Champion Citabria</span> Type of aircraft

The Citabria is a light single-engine, two-seat, fixed conventional gear airplane which entered production in the United States in 1964. Designed for flight training, utility and personal use, it is capable of sustaining aerobatic stresses from +5g to -2g. Its name spelled backwards, "airbatic", reflects this.

<span class="mw-page-title-main">Piper J-5</span> Type of aircraft

The Piper J-5 Cub Cruiser was a larger, more powerful version of the basic Piper J-3 Cub. It was designed just two years after the J-3 Cub, and differed by having a wider fuselage with the pilot sitting in the front seat and two passengers sitting in the rear seat. Equipped with a 75-hp Continental engine the plane's cruising speed was 75 mph. Though officially a three-seater, it would be more accurately described as a "two-and-a-half-seater", as two adults would find themselves quite cramped in the wider rear seat. The Cruiser sold for $1,798 when it was first designed.

<span class="mw-page-title-main">American Champion Decathlon</span> Two-seat fixed conventional gear aerobatic light airplane

The American Champion 8KCAB Decathlon and Super Decathlon are two-seat fixed conventional gear light airplanes designed for flight training and personal use and capable of sustaining aerobatic stresses between +6g and −5g. The Decathlon entered production in the United States in 1970 as a more powerful and stronger complement to the American Champion Citabria line of aircraft.

<span class="mw-page-title-main">American Champion Scout</span> Two-seat, high-wing, single-engined airplane

The 8GCBC Scout is a two-seat, high-wing, single-engined fixed conventional gear general aviation airplane that entered production in the United States in 1974. Designed for personal and commercial use, it is commonly found in utility roles such as bush flying—thanks to its short takeoff and landing (STOL) ability—as well as agriculture, pipeline patrol, and glider and banner towing.

<span class="mw-page-title-main">Aeronca 11 Chief</span> Type of aircraft

The Aeronca Chief is a single-engine, light aircraft with fixed conventional landing gear and two seats in side-by-side configuration, which entered production in the United States in 1945.

<span class="mw-page-title-main">Aeronca Sedan</span> Type of aircraft

The Aeronca 15AC Sedan is a four-seat, fixed conventional gear light airplane which was produced by Aeronca Aircraft between 1948 and 1951. Designed for personal use, the Sedan also found applications in utility roles including bush flying. The Sedan was the last design that Aeronca put into production and was the largest aircraft produced by the company.

<span class="mw-page-title-main">Aeronca L</span> Type of aircraft

The Aeronca L was a 1930s American cabin monoplane designed and built, in small numbers, by Aeronca Aircraft. It differed significantly from other Aeronca planes by the use of radial engines, streamlining, and a cantilever low wing.

<span class="mw-page-title-main">Bellanca CH-400 Skyrocket</span> American single engine utility aircraft

The Bellanca CH-400 Skyrocket is a six-seat utility aircraft built in the United States in the 1930s, a continuation of the design lineage that had started with the Bellanca WB-2. Retaining the same basic airframe of the preceding CH-200 and CH-300, the CH-400 was fitted with a more powerful Pratt & Whitney Wasp radial engine.

<span class="mw-page-title-main">Bellanca 14-13</span> American light aircraft

The Bellanca 14-13 Cruisair Senior and its successors were a family of light aircraft that were manufactured in the United States by AviaBellanca Aircraft after World War II. They were a follow-up to the prewar Bellanca 14-7 and its derivatives.

<span class="mw-page-title-main">Fantasy Air Allegro</span> Czech ultralight aircraft

The Fantasy Air Allegro is a Czech two seat, high wing, tricycle gear, single engine monoplane light-sport aircraft or microlight originally designed and built by Fantasy Air and later produced in the United States by Allegro LSA.

<span class="mw-page-title-main">Johnson Rocket 185</span> Type of aircraft

The Johnson Rocket 185 was a 1940s American two seat cabin monoplane designed by Johnson and built at Fort Worth, Texas.

The Fisher Horizon is a family of Canadian two-seats-in-tandem, conventional landing gear, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders. The Horizon 1 was inspired by the Aeronca Champion and its later version, the Bellanca Citabria, while the Horizon 2 was inspired by the Cessna O-1 Bird Dog.

The Light Miniature Aircraft LM-1, LM-2 and LM-3 are a family of American high wing, conventional landing gear, strut-braced, single engine ultralight aircraft that are scale reproductions of famous general aviation aircraft. The designs were all available as plans from Light Miniature Aircraft of Okeechobee, Florida for amateur construction.

<span class="mw-page-title-main">Aeronca Chief family</span> Family of American light aircraft

The Aeronca K series, Aeronca Chief, Aeronca Super Chief, Aeronca Tandem, Aeronca Scout, Aeronca Sea Scout, Aeronca Champion and Aeronca Defender were a family of American high-winged light touring aircraft, designed and built starting in the late 1930s by Aeronca Aircraft.

<span class="mw-page-title-main">TechProAviation Merlin 100</span> Czech homebuilt aircraft

The TechProAviation Merlin HV 100 is a Czech amateur-built aircraft, designed and produced by TechProAviation of Olomouc. The aircraft is supplied as a kit for amateur construction.

References