Amiga Ranger Chipset

Last updated
Amiga Ranger
Developer Commodore International
ManufacturerCommodore International
Product family Amiga
TypePersonal computer
GenerationUnreleased prototype
Lifespan1986–1987 (development period)
CPU 68010 or 68020
Memory2 MB chip RAM
Display1024×1024 pixel
Graphics1024×1024 pixels with 128 colors (7-bit color depth)
SuccessorECS and AAA chipsets
Related Amiga 1000, Amiga 2000

Amiga Ranger is an unreleased prototype personal computer by Commodore which was intended to be the second generation Amiga chipset, prior to ECS. It was designed by the original Los Gatos Amiga team including Jay Miner.

Contents

Overview

After the release of the Amiga 1000, Jay Miner began to design its intended successor, between 1986 and 1987. Code-named Amiga Ranger, it was planned to be highly expandable like Amiga 2000 with better graphics and CPU. The Ranger is said to have possibly included a 68010 or 68020 CPU.

Information for this new chipset remains unclear. However, the sound system may have still been the same as the original chipset. According to RJ Mical, the new chipset kept the original 13-bit DAC for its CLUT but with quadrupled color registers from 32 to 128. The color palette would have remained at 4096 colors but the resolution could go up to 1024×1024 pixels with 128 colors (7-bit color depth). Additionally the chipset can address up to 2 MB of Chip RAM space.

Ranger used 2 MB VRAM as chip memory. In an interview, Jay Miner described benefits of using VRAM instead of DRAM; this gave the display system enough memory bandwidth for 1024×1024 pixel displays. From the known specification, it could be said that Ranger chipset was designed to compete with the Sharp X68000 and Apple Macintosh II personal computers (both released in 1987) which take advantage of VRAM technology.

Jay Miner made sure that the Ranger chipset was completed and fully tested before he left Commodore in hope that one day the company would release it. But at that time, VRAM was considered expensive compared to DRAM, so Commodore refused to release Ranger for its high price which was unsuitable for the low-end systems like Amiga 500 to cover its costs. Dale Luck is in possession of a Ranger system prototype, but it's unknown what state it is in.

In a few years, VRAM costs dropped to be only 20% more than DRAM, so Commodore planned to use VRAM in the AAA chipset, the next-gen Amiga chipset left in an unfinished state when the company went into voluntary liquidation in 1994.

Some thoughts of a built-in blitter per playfield designed in Ranger had been rejected by Dave Haynie. However, a post on Team Amiga explained the Ranger idea:

The "Ranger" was the code-name for the A1000-followup idea/project/notion/whatever being advocated by the Los Gatos Amiga group. It may have been 68010 with or without simple MMU, or with 68020, or with virtually any other magical thing you can imagine, including way better Amiga chips (already designed and working, only Commodore refused to release them), etc. Basically, "Ranger" became a kind of catch all for anything anyone ever believed would have been done better had Los Gatos not lost out over Commodore Germany's Amiga 2000 configuration (which, itself, was nothing more than an A1000 with Zorro backplane attached and the slot form-factor changed to permit this bridge card idea; Germany also being where Commodore PCs came from, at the time). I of course inherited this form factor and design spec when I took on the A2000-CR project in West Chester. I did manage to improve a few details (real CPU slot, real Video slot), as well as using the Amiga 500 architecture and integrating the expansion logic.


There's no question a "Ranger" project did exist in some form at Los Gatos. Far as I know, it was never completed, though I wasn't out there. It made the transition from "legend" to "myth" over ten years ago, I'm afraid, gaining new powers with each retelling, after the fashion of all good myths.

Related Research Articles

<span class="mw-page-title-main">Amiga</span> Family of personal computers sold by Commodore

Amiga is a family of personal computers introduced by Commodore in 1985. The original model is one of a number of mid-1980s computers with 16- or 16/32-bit processors, 256 KB or more of RAM, mouse-based GUIs, and significantly improved graphics and audio compared to previous 8-bit systems. These systems include the Atari ST—released earlier the same year—as well as the Macintosh and Acorn Archimedes. Based on the Motorola 68000 microprocessor, the Amiga differs from its contemporaries through the inclusion of custom hardware to accelerate graphics and sound, including sprites and a blitter, and a pre-emptive multitasking operating system called AmigaOS.

<span class="mw-page-title-main">Amiga 500</span> Personal computer by Commodore

The Amiga 500, also known as the A500, was the first popular version of the Amiga home computer, "redefining the home computer market and making so-called luxury features such as multitasking and colour a standard long before Microsoft or Apple sold these to the masses". It contains the same Motorola 68000 as the Amiga 1000, as well as the same graphics and sound coprocessors, but is in a smaller case similar to that of the Commodore 128.

<span class="mw-page-title-main">Amiga 1000</span> 1985 personal computer

The Amiga 1000, also known as the A1000, is the first personal computer released by Commodore International in the Amiga line. It combines the 16/32-bit Motorola 68000 CPU which was powerful by 1985 standards with one of the most advanced graphics and sound systems in its class. It runs a preemptive multitasking operating system that fits into 256 KB of read-only memory and was shipped with 256 KB of RAM. The primary memory can be expanded internally with a manufacturer-supplied 256 KB module for a total of 512 KB of RAM. Using the external slot the primary memory can be expanded up to 8.5 MB.

The Enhanced Chip Set (ECS) is the second generation of the Amiga computer's chipset, offering minor improvements over the original chipset (OCS) design. ECS was introduced in 1990 with the launch of the Amiga 3000. Amigas produced from 1990 onwards featured a mix of OCS and ECS chips, such as later versions of the Amiga 500 and the Commodore CDTV. Other ECS models were the Amiga 500+ in 1991 and lastly the Amiga 600 in 1992.

<span class="mw-page-title-main">Amiga Original Chip Set</span> Chipset used in Amiga personal computer

The Original Chip Set (OCS) is a chipset used in the earliest Commodore Amiga computers and defined the Amiga's graphics and sound capabilities. It was succeeded by the slightly improved Enhanced Chip Set (ECS) and the greatly improved Advanced Graphics Architecture (AGA).

<span class="mw-page-title-main">Amiga 600</span>

The Amiga 600, also known as the A600, is a home computer introduced in March 1992. It is the final Amiga model based on the Motorola 68000 and the 1990 Amiga Enhanced Chip Set. A redesign of the Amiga 500 Plus, it adds the option of an internal hard disk drive and a PCMCIA port. Lacking a numeric keypad, the A600 is only slightly larger than an IBM PC keyboard, weighing approximately 6 pounds (2.72kg). It shipped with AmigaOS 2.0, which was considered more user-friendly than earlier versions of the operating system.

<span class="mw-page-title-main">Amiga 3000</span> Personal computer by Commodore

The Amiga 3000, or A3000, is a personal computer released by Commodore in June 1990. It is the successor to the Amiga 2000 and its upgraded model Amiga 2500 with more processing speed, improved graphics, and a new revision of the operating system.

<span class="mw-page-title-main">Amiga 2000</span> Personal computer from Commodore, 1987

The Amiga 2000, or A2000, is a personal computer released by Commodore in March 1987. It was introduced as a "big box" expandable variant of the Amiga 1000 but quickly redesigned to share most of its electronic components with the contemporary Amiga 500 for cost reduction. Expansion capabilities include two 3.5" drive bays and one 5.25" bay that could be used by a 5.25" floppy drive, a hard drive, or CD-ROM once they became available.

Chip RAM is a commonly used term for the integrated RAM used in Commodore's line of Amiga computers. Chip RAM is shared between the central processing unit (CPU) and the Amiga's dedicated chipset. It was also, rather misleadingly, known as "graphics RAM".

Amiga Advanced Graphics Architecture (AGA) is the third-generation Amiga graphic chipset, first used in the Amiga 4000 in 1992. Before release AGA was codenamed Pandora by Commodore International.

<span class="mw-page-title-main">X68000</span> 1987 home computer

The X68000 is a home computer created by Sharp Corporation. It was first released in 1987 and sold only in Japan.

<span class="mw-page-title-main">MOS Technology Agnus</span>

The MOS Technology "Agnus", usually called Agnus, is an integrated circuit in the custom chipset of the Amiga computer. The Agnus, Denise and Paula chips collectively formed the OCS and ECS chipsets.

<span class="mw-page-title-main">Hold-And-Modify</span> Display mode used in Commodore Amiga computers

Hold-And-Modify, usually abbreviated as HAM, is a display mode of the Commodore Amiga computer. It uses a highly unusual technique to express the color of pixels, allowing many more colors to appear on screen than would otherwise be possible. HAM mode was commonly used to display digitized photographs or video frames, bitmap art and occasionally animation. At the time of the Amiga's launch in 1985, this near-photorealistic display was unprecedented for a home computer and it was widely used to demonstrate the Amiga's graphical capability. However, HAM has significant technical limitations which prevent it from being used as a general purpose display mode.

This is a list of models and clones of Amiga computers.

The AAA chipset was intended to be the next-generation Amiga multimedia system designed by Commodore International. Initially begun as a secret project, the first design discussions were started in 1988, and after many revisions and redesigns the first silicon versions were fabricated in 1992–1993. The project was stymied in 1993 based on a lack of funds for chip revisions.

<span class="mw-page-title-main">Minimig</span>

Minimig is an open source re-implementation of an Amiga 500 using a field-programmable gate array (FPGA).

Hombre is a RISC chipset for the Amiga, designed by Commodore, which was intended as the basis of a range of Amiga personal computers and multimedia products, including a successor to the Amiga 1200, a next generation game machine called CD64 and a 3D accelerator PCI card. Hombre was canceled along with the bankruptcy of Commodore International.

<span class="mw-page-title-main">Amiga 1200</span> 1992 personal computer

The Amiga 1200, or A1200, is a personal computer in the Amiga computer family released by Commodore International, aimed at the home computer market. It was launched on October 21, 1992, at a base price of £399 in the United Kingdom and $599 in the United States.

The AA+ chipset was a planned Amiga-compatible chipset that Commodore International announced in 1992. There were two separate projects: the next generation Advanced Amiga Architecture chipset and the lower cost, more pragmatic AA+ chipset. The former was in development when Commodore declared bankruptcy; the latter existed only on paper. Both were cancelled when Commodore folded.

In addition to the Amiga chipsets, various specially designed chips have been used in Commodore Amiga computers that do not belong to the 'Amiga chipset' in a tight sense.

References

See also