Anti-graffiti coating

Last updated

An anti-graffiti coating is a coating that prevents graffiti paint from bonding to surfaces.

Contents

Cleaning graffiti off buildings costs billions of dollars annually.[ citation needed ] Many cities have started anti-graffiti programs but vandalism is still a problem. Companies across the globe are attempting to develop coatings to prevent vandals from defacing public and private property. [1] The coatings being developed can be the paint itself, or a clear coat added on top of existing paint or building facades. Depending on the substrate and the severity of graffiti, different coatings give different benefits and disadvantages. [2]

Types of paint

There are two common types of paint used today. The first are water-based paints such as latex and acrylic paint, and the second are oil-based paints. The paint of choice will depend on the substrate to be painted upon and the desired end result. All paints have the same basic structure:

Paint drying on surface Paint drying.JPG
Paint drying on surface

There actually is no chemical bond between paint and an underlying surface. Paint adheres simply through physical forces like Van der Waals. When paint is first applied to a surface it goes on as a thick wet coating. As the solvent is allowed to evaporate out, the pigment plates which are attracted to one another stack up to form layers. The binder polymerizes essentially locking the pigment plates together. What remains is a uniform coating of binder and pigment. Anti-graffiti coatings make paints unable to adhere to the surface.

Types of coatings

Anti-graffiti coatings can be invisible to the naked eye. There are two different categories of anti-graffiti coatings. The first, sacrificial coatings, are applied to a surface and then removed when graffiti is applied. The surface underneath will be left clean and a new sacrificial coating can be applied. The other type of coating are permanent coatings that prevent graffiti from adhering to a surface in the first place.

Newer coatings are made of charged polymeric materials that form a gel on the surface of the building or substrate. Some of the most important characteristics of anti-graffiti coatings are:

Sacrificial coatings

A sacrificial coating forms a clear coat barrier over the wall or surface being protected. If the surface is vandalized the coating can be removed (sacrificed) using a high-pressure washer taking the graffiti with it. The coating then must be reapplied. The materials used to make a sacrificial coating are usually inexpensive optically clear polymers such as acrylates, biopolymers, and waxes. These polymers form weak bonds with the substrate to allow for easy removal.

Semi sacrificial coatings

A semi sacrificial coating known as a safety shield acts as a penetrating sealer on the wall or surface protecting the surface pores. If the surface is vandalized the coating can be partially removed using a combination of graffiti removal solvent and high-pressure washer. The anti graffiti safety shield is generally reapplied every second attack. While it is possible to use only pressure to remove coating, this will cause additional surface erosion.

Permanent coatings

Permanent coatings are often more expensive than sacrificial coatings, but if used appropriately only have to be applied once. These work by creating a protective surface that spray paint cannot bond to. After the surface has been vandalized, often all that is needed to remove the paint is a simple solvent (toluene) and some manual labor. The underlying surface and the protective coating will remain undamaged.

Some of the types of permanent coatings include those based on polyurethanes, nano-particles, fluorinated hydrocarbons, or siloxanes. Polyurethane coatings are useful because of their barrier properties. High chain stiffness and high crosslinking density reduces the ability of the polymer to swell and absorb graffiti paint. [3] Fluorinated coatings are some of the most effective in the field of graffiti prevention. Fluorine is the most electronegative element, meaning that it shows very little affinity for the electrons of other elements. When fluorine is attached to a surface it will decrease surface energy at the interface, minimizing the contact with the graffiti paint. For the same reason that a Teflon-coated pan repels both water and oil, a fluorinated coating will repel water and oil-based paints. These coatings also have the added benefit of being chemically inert as well as very durable. They are also expensive and can be difficult to apply. [4]

Silicon based coatings are hydrophobic, which means the surface repels water. This reduces the effects of photo-oxidation of surfaces.

Hydrophobic and lipophobic ligands grafted to nanoparticles in coating Anti Graffiti2.JPG
Hydrophobic and lipophobic ligands grafted to nanoparticles in coating

One of the newer additions to this ever growing market are nanoparticle based coatings. Silica particles are formed using the sol-gel method. The resulting silica particles have both reactive (Si-OH) and nonreactive (Si=O) groups on the surface. The reactive groups provide locations for further chemical processing, which allow you to change the surface properties of the nanoparticles. For anti-graffiti coatings, hydrophobic and oleophobic (oil-fearing) ligands are grafted onto the silica nanoparticles. Hydrophobic ligands are non-polar molecules such as hydrocarbon chains. Oleophobic ligands consist of polar molecules. Normally these two different types of molecules would phase separate in solution, for the same reason that water and oil do not mix. By chemically grafting the ligands onto the silica particles, this effect is counteracted. The effect is a coating that shows an equal dislike for both water-based and oil-based paints. [5]

Use on historic buildings and monuments

The use of anti-graffiti barrier coatings to protect graffiti-prone historic buildings, monuments, and other culturally sensitive surfaces may seem to be an easy solution to a persistent problem. Research suggests that the application of such coatings can cause physical or aesthetic changes or otherwise damage historic substrates. [6] Both the National Park Service and English Heritage advise against the use of anti-graffiti coatings and promote the exercise of caution when they are applied to historic buildings and monuments. [7] [8]

In the United States, many state and local historic district commissions and review boards have regulations that require approval for both graffiti removal work and the application of coatings applied to the facades on designated landmarks or properties located in local historic districts. Alternatives to anti-graffiti barrier coatings include security measures such as night lighting and surveillance cameras, design strategies such as barrier plantings and fences, improved maintenance of the general area and rapid graffiti removal, as well as community awareness raising programs like a neighborhood watch.[ citation needed ]

Use in charity

Anti-graffiti coatings are frequently used by a number of charities that use public installations to raise money for their respective causes. In cases where pieces of art and sculptures may be put out into the public, these coatings have been used to protect the pieces against graffiti attacks. [9] These sculptures are protected by anti-graffiti coatings, often polysiloxane clear coatings so as to protect them from graffiti and weather damage. [10]

See also

Related Research Articles

<span class="mw-page-title-main">Acrylic paint</span> Water resistant paint type meant for canvases

Acrylic paint is a fast-drying paint made of pigment suspended in acrylic polymer emulsion and plasticizers, silicone oils, defoamers, stabilizers, or metal soaps. Most acrylic paints are water-based, but become water-resistant when dry. Depending on how much the paint is diluted with water, or modified with acrylic gels, mediums, or pastes, the finished acrylic painting can resemble a watercolor, a gouache, or an oil painting, or it may have its own unique characteristics not attainable with other media.

<span class="mw-page-title-main">Paint</span> Pigment applied over a surface that dries as a solid film

Paint is a material or mixture that, after applied to a solid material and allowed to dry, adds a film-like layer. As art, this is used to create an image, known as a painting. Paint can be made in many colors and types. Most paints are either oil-based or water-based, and each has distinct characteristics.

<span class="mw-page-title-main">Gesso</span> Paint primer composed of a white pigment and a binder

Gesso, also known as "glue gesso" or "Italian gesso", is a white paint mixture used to coat rigid surfaces such as wooden painting panels or masonite as a permanent absorbent primer substrate for painting. It consists of a binder mixed with chalk, gypsum, pigment, or any combination of these.

<span class="mw-page-title-main">Varnish</span> Transparent hard protective finish or film

Varnish is a clear transparent hard protective coating or film. It is not to be confused with wood stain. It usually has a yellowish shade due to the manufacturing process and materials used, but it may also be pigmented as desired. It is sold commercially in various shades.

<span class="mw-page-title-main">Paint stripper</span> Chemical product that removes paint, finishes, and coatings

Paint stripper or paint remover is a chemical product designed to remove paint, finishes, and coatings, while also cleaning the underlying surface.

<span class="mw-page-title-main">Wood stain</span> Type of paint used to colour wood

Wood stain is a type of paint used to colour wood comprising colourants dissolved and/or suspended in a vehicle or solvent. Pigments and/or dyes are largely used as colourants in most stains.

<span class="mw-page-title-main">Primer (paint)</span> Preparatory coating put on materials before painting

A primer or undercoat is a preparatory coating put on materials before painting. Priming ensures better adhesion of paint to the surface, increases paint durability, and provides additional protection for the material being painted.

<span class="mw-page-title-main">Powder coating</span> Type of coating applied as a free-flowing, dry powder

Powder coating is a type of coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, which is delivered via an evaporating solvent, powder coating is typically applied electrostatically and then cured under heat or with ultraviolet light. The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a thick, tough finish that is more durable than conventional paint. Powder coating is mainly used for coating of metal objects, particularly those subject to rough use. Advancements in powder coating technology like UV-curable powder coatings allow for other materials such as plastics, composites, carbon fiber, and MDF to be powder coated, as little heat or oven dwell time is required to process them.

Silicate mineral paints or mineral colors are paint coats with mineral binding agents. Two relevant mineral binders play a role in the field of colors: Lime and silicate.

<span class="mw-page-title-main">Parylene</span> Chemical compound

Parylene is the common name of a polymer whose backbone consists of para-benzenediyl rings −C
6
H
4
− connected by 1,2-ethanediyl bridges −CH
2
CH
2
−. It can be obtained by polymerization of para-xylyleneH
2
C
=C
6
H
4
=CH
2
.

<span class="mw-page-title-main">Release agent</span> Substance applied to prevent adhesion to a surface

A release agent is a chemical used to prevent other materials from bonding to surfaces. Release agents aid in processes involving mold release, die-cast release, plastic release, adhesive release, and tire and web release. Release agents are one of many additives used in the production of plastics.

<span class="mw-page-title-main">Automotive paint</span> Coloring and resistance to corrosion of cars

Automotive paint is paint used on automobiles for both protective and decorative purposes. Water-based acrylic polyurethane enamel paint is currently the most widely used paint for reasons including reducing paint's environmental impact.

<span class="mw-page-title-main">Janus particles</span> Type of nanoparticle or microparticle

Janus particles are special types of nanoparticles or microparticles whose surfaces have two or more distinct physical properties. This unique surface of Janus particles allows two different types of chemistry to occur on the same particle. The simplest case of a Janus particle is achieved by dividing the particle into two distinct parts, each of them either made of a different material, or bearing different functional groups. For example, a Janus particle may have one half of its surface composed of hydrophilic groups and the other half hydrophobic groups, the particles might have two surfaces of different color, fluorescence, or magnetic properties. This gives these particles unique properties related to their asymmetric structure and/or functionalization.

Hydrophobic silica is a form of silicon dioxide that has hydrophobic groups chemically bonded to the surface. The hydrophobic groups are normally alkyl or polydimethylsiloxane chains. Hydrophobic silica can be processed in different ways; such as fumed silica, precipitated silica, and aerosol assisted self assembly, all existing in the form of nanoparticles.

Paint has four major components: pigments, binders, solvents, and additives. Pigments serve to give paint its color, texture, toughness, as well as determining if a paint is opaque or not. Common white pigments include titanium dioxide and zinc oxide. Binders are the film forming component of a paint as it dries and affects the durability, gloss, and flexibility of the coating. Polyurethanes, polyesters, and acrylics are all examples of common binders. The solvent is the medium in which all other components of the paint are dissolved and evaporates away as the paint dries and cures. The solvent also modifies the curing rate and viscosity of the paint in its liquid state. There are two types of paint: solvent-borne and water-borne paints. Solvent-borne paints use organic solvents as the primary vehicle carrying the solid components in a paint formulation, whereas water-borne paints use water as the continuous medium. The additives that are incorporated into paints are a wide range of things which impart important effects on the properties of the paint and the final coating. Common paint additives are catalysts, thickeners, stabilizers, emulsifiers, texturizers, biocides to fight bacterial growth, etc.

Adsorption of polyelectrolytes on solid substrates is a surface phenomenon where long-chained polymer molecules with charged groups bind to a surface that is charged in the opposite polarity. On the molecular level, the polymers do not actually bond to the surface, but tend to "stick" to the surface via intermolecular forces and the charges created by the dissociation of various side groups of the polymer. Because the polymer molecules are so long, they have a large amount of surface area with which to contact the surface and thus do not desorb as small molecules are likely to do. This means that adsorbed layers of polyelectrolytes form a very durable coating. Due to this important characteristic of polyelectrolyte layers they are used extensively in industry as flocculants, for solubilization, as supersorbers, antistatic agents, as oil recovery aids, as gelling aids in nutrition, additives in concrete, or for blood compatibility enhancement to name a few.

The surface chemistry of paper is responsible for many important paper properties, such as gloss, waterproofing, and printability. Many components are used in the paper-making process that affect the surface.

Ultra-low fouling is a rating of a surface's ability to shed potential contamination. Surfaces are prone to contamination, which is a phenomenon known as fouling. Unwanted adsorbates caused by fouling change the properties of a surface, which is often counter-productive to the function of that surface. Consequently, a necessity for anti-fouling surfaces has arisen in many fields: blocked pipes inhibit factory productivity, biofouling increases fuel consumption on ships, medical devices must be kept sanitary, etc. Although chemical fouling inhibitors, metallic coatings, and cleaning processes can be used to reduce fouling, non-toxic surfaces with anti-fouling properties are ideal for fouling prevention. To be considered effective, an ultra-low fouling surface must be able to repel and withstand the accumulation of detrimental aggregates down to less than 5 ng/cm2. A recent surge of research has been conducted to create these surfaces in order to benefit the biological, nautical, mechanical, and medical fields.

<span class="mw-page-title-main">Conservation and restoration of frescos</span> Art preservation techniques

The conservation and restoration of frescoes is the process of caring for and maintaining frescos, and includes documentation, examination, research, and treatment to insure their long-term viability, when desired.

Waterborne resins are sometimes called water-based resins. They are resins or polymeric resins that use water as the carrying medium as opposed to solvent or solvent-less. Resins are used in the production of coatings, adhesives, sealants, elastomers and composite materials. When the phrase waterborne resin is used, it usually describes all resins which have water as the main carrying solvent. The resin could be water-soluble, water reducible or water dispersed.

References

  1. Amrutkar, Shweta; More, Aarti; Mestry, Siddhesh; Mhaske, S. T. (1 May 2022). "Recent developments in the anti-graffiti coatings: an attentive review". Journal of Coatings Technology and Research. 19 (3): 717–739. doi:10.1007/s11998-021-00580-z. ISSN   1935-3804. S2CID   247111156.
  2. Andrew Turley. 9 March 2009. "Anti-Graffiti Paint Cleans Up on Historic Buildings". Chemistry and Industry.
  3. CBS Interactive. BNET
  4. Jurgen Scheeder, N. Visscher, T. Nabuurs, and A. Overbeek. Oct 2005. "Novel, Water-Based Fluorinated Polymers With Excellent Antigraffiti Properties". JCT Research. 2:8, 617–625.
  5. Bayer MaterialScience. "Wiping Out Graffiti". Bayer AG. 26 April 2009. Archived 10 June 2009 at the Wayback Machine .
  6. Ashurst, Nicola; Chapman, Sasha; MacDonald, Susan; Butlin, Roy; Murry, Matthew. "An investigation of sacrificial graffiti barriers for historic masonry." English Heritage Research Transactions. Vol. 2 (2002).
  7. Weaver, Martin E. "Preservation Brief 38: Removing Graffiti from Historic Masonry." National Park Service (1995). "Preservation Brief 38: Removing Graffiti from Historic Masonry". Archived from the original on 29 December 2011. Retrieved 16 April 2013. Coatings
  8. English Heritage. "Graffiti on historic buildings and monuments: Methods of removal and prevention." Technical Advice Note. English Heritage (1999).
  9. Amrutkar, Shweta; More, Aarti; Mestry, Siddhesh; Mhaske, S. T. (1 May 2022). "Recent developments in the anti-graffiti coatings: an attentive review". Journal of Coatings Technology and Research. 19 (3): 721. doi:10.1007/s11998-021-00580-z. ISSN   1935-3804. S2CID   247111156.
  10. "Elephant Parade". Urban Hypiene Ltd. Singapore. Retrieved 27 October 2016.