B&W mPower

Last updated

The B&W mPower was a proposed small modular reactor designed by Babcock & Wilcox, and to be built by Generation mPower LLC, a joint venture of Babcock & Wilcox and Bechtel. It was a Generation III+ integral pressurized water reactor (light water reactor) concept.

Contents

In March 2017, Bechtel withdrew from the joint venture and the project was terminated. [1] [2]

History

The reactor was unveiled by Babcock & Wilcox in June 2009. [3] [4] In July 2010, Babcock & Wilcox announced a formal alliance with Bechtel called Generation mPower LLC. [5] At the same time, Babcock & Wilcox announced that it would build a test facility for the mPower reactor design at the Center for Advanced Engineering and Research in Bedford County, Virginia. [6] In April 2011, Babcock & Wilcox received a $5 million grant from the Virginia Tobacco Indemnification and Community Revitalisation Commission for this test facility. [7] [8]

In June 2011 Generation mPower signed a letter of intent with the Tennessee Valley Authority for constructing up to six reactors at Clinch River Breeder Reactor site in Tennessee. [9] [10]

Generation mPower planned to apply to the Nuclear Regulatory Commission for design certification by 2013. [10] Babcock & Wilcox announced on February 20, 2013, that they had contracted with the Tennessee Valley Authority to apply for permits to build an mPower small modular reactor at TVA's Clinch River site in Oak Ridge, Tennessee. [11] [12]

In November 2012, mPower won a US Department of Energy funding competition for new Small modular reactor (SMR) designs. The competition was intended to accelerate development of SMRs. [13] The award was funded at $79 million in 2013, from a total of $150 million over five years, with a possibility of total government grants reaching $226 million or more. [14]

In 2013 Babcock & Wilcox had intended to sell a majority stake in the mPower joint venture, but in February 2014 announced it was unable to find a buyer. [15]

In February 2014, Jim Ferland, B&W's CEO, announced that spending on the mPower reactor development will be decreased by 75%. The official explanation was that the company had failed in its effort to find additional major investors to participate in the project. [16]

In April 2014, Babcock & Wilcox announced it was scaling back investment in the programme, projecting investment of up to $15 million annually. It stated:

"Without the ability to secure significant additional investors or customer engineering, procurement and construction contracts to provide the financial support necessary to develop and deploy mPower reactors, the current development pace will be slowed." [17]

In March 2017 Bechtel withdrew from the joint venture, citing the inability to find a utility company that would provide a site for a first reactor and an investor. [1] The development project was terminated, with Babcock & Wilcox paying Bechtel a $30 million settlement. [2] [18]

Design

B&W mPower was a Generation III+ integral pressurized water reactor (light water reactor) with a modular design. The reactor and steam generator would be located in a single integrated reactor vessel located in an underground containment facility that would store all of the spent fuel. [4] The modular unit had a diameter of 4.5 metres (15 ft) and it was 23 metres (75 ft) high. The reactor core was 2 by 2 metres (6 ft 7 in by 6 ft 7 in). The steam generator was similar to Once Through Steam Generators (OTSG) used in existing B&W plants (i.e. Three Mile island). The unit had an air-cooled condenser giving 31% thermal efficiency, and passive safety systems. [19]

The reactor was planned to have a rated electrical output of 125–180 MWe. [19] When originally announced, the reactor had planned capacity of 125 MWe. [4] [19] Later the power was increased to 160 MWe and then to 180 MWe. [19] In its pre-application design certification interaction with the Nuclear Regulatory Commission, the reactor's rated capacity was described as 500MWt of thermal power and 160 MWe of electrical power. [20]

The reactor was designed for an expected lifetime of 60 years. [4] [20] [21] [22]

Fuel and refueling

B&W mPower uses standard fuel enriched to 5%, similar to the fuel loaded in the other PWRs. [19] It was designed for a 4-year refueling cycle. In the process of refuelling, the entire core will be completely removed in a single evolution, and replaced in a second separate evolution, making the core nearly "plug and play", unlike traditional reactors, which require fuel handling and movement of individual fuel rods during a refueling outage. [19] The entire used core, once removed, can be placed in storage in the spent fuel pool next to the IRV in the containment, which was designed to hold an entire 60 years worth of used fuel, and was accessible by the containment gantry crane located above the IRV within the containment. [21]

Thermal hydraulics

The mPower incorporates several features of the boiling water reactor (BWR). Like a BWR, the mPower reactor's primary coolant/moderator was highly purified water (with no boric acid). The Reactor Water Cleanup System ensures that primary system water remains pure. Similar to the ABWR, the mPower reactor had integral coolant recirculation pumps inside the Integral Reactor Vessel (IRV). The mPower reactor control rods are inserted from the top of the core and inserted upon scram under gravity. All of the primary coolants were in the liquid phase during normal operation.[ citation needed ]

The integral once-through steam generator was an advanced derivative of the steam generators used in older B&W designs (Davis Besse). Control rod drives do not penetrate the IRV, as in the light water reactors of today, but are instead wholly enclosed within the IRV. Burnable neutron absorbers within the fuel and control rod inventory are used to suppress hot excess reactivity. Cold shut-down was accomplished with control rod insertion (as in BWRs).[ citation needed ]

The mPower was designed to produce superheated steam and would not require steam separators and dryers before admitting steam into the high-pressure turbine.[ citation needed ]

Safety

The mPower was designed to eliminate the potential loss of coolant accidents as the integral reactor vessel would not have a large cold or hot leg piping; it contains the entire primary coolant loop within the reactor pressure vessel with automatic primary loop depressurization. If secondary cooling was lost, creating an effective loss of standard heat removal, there are water supplies located above and within the containment that can cool the vessel with gravity-driven cooling. Heat removal can be used if these systems are exhausted, such as by flooding the containment and establishing natural circulation, as no electrically driven pumps are required. [23]

See also

Related Research Articles

<span class="mw-page-title-main">Boiling water reactor</span> Type of nuclear reactor that directly boils water

A boiling water reactor (BWR) is a type of light water nuclear reactor used for the generation of electrical power. It is the second most common type of electricity-generating nuclear reactor after the pressurized water reactor (PWR), which is also a type of light water nuclear reactor.

<span class="mw-page-title-main">RBMK</span> Type of Soviet nuclear power reactor

The RBMK is a class of graphite-moderated nuclear power reactor designed and built by the Soviet Union. The name refers to its design where, instead of a large steel pressure vessel surrounding the entire core, the core is surrounded by a cylindrical annular steel tank inside a concrete vault and each fuel assembly is enclosed in an individual 8 cm (inner) diameter pipe. The channels also contain the coolant, and are surrounded by graphite.

<span class="mw-page-title-main">Light-water reactor</span> Type of nuclear reactor that uses normal water

The light-water reactor (LWR) is a type of thermal-neutron reactor that uses normal water, as opposed to heavy water, as both its coolant and neutron moderator; furthermore a solid form of fissile elements is used as fuel. Thermal-neutron reactors are the most common type of nuclear reactor, and light-water reactors are the most common type of thermal-neutron reactor.

<span class="mw-page-title-main">BWX Technologies</span> American industrial company

BWX Technologies, Inc., headquartered in Lynchburg, Virginia is a supplier of nuclear components and fuel to the U.S.

<span class="mw-page-title-main">Babcock & Wilcox</span> American power technology company

Babcock & Wilcox is an American energy technology and service provider that is active and has operations in many international markets across the globe with its headquarters in Akron, Ohio, USA. Historically, the company is best known for their steam boilers.

<span class="mw-page-title-main">Containment building</span> Structure surrounding a nuclear reactor to prevent radioactive releases

A containment building is a reinforced steel, concrete or lead structure enclosing a nuclear reactor. It is designed, in any emergency, to contain the escape of radioactive steam or gas to a maximum pressure in the range of 275 to 550 kPa. The containment is the fourth and final barrier to radioactive release, the first being the fuel ceramic itself, the second being the metal fuel cladding tubes, the third being the reactor vessel and coolant system.

The Advanced CANDU reactor (ACR), or ACR-1000, was a proposed Generation III+ nuclear reactor design, developed by Atomic Energy of Canada Limited (AECL). It combined features of the existing CANDU pressurised heavy water reactors (PHWR) with features of light-water cooled pressurized water reactors (PWR). From CANDU, it took the heavy water moderator, which gave the design an improved neutron economy that allowed it to burn a variety of fuels. It replaced the heavy water cooling loop with one containing conventional light water, reducing costs. The name refers to its design power in the 1,000 MWe class, with the baseline around 1,200 MWe.

<span class="mw-page-title-main">Supercritical water reactor</span> Type of nuclear reactor whose water operates at supercritical pressure

The supercritical water reactor (SCWR) is a concept Generation IV reactor, designed as a light water reactor (LWR) that operates at supercritical pressure. The term critical in this context refers to the critical point of water, and must not be confused with the concept of criticality of the nuclear reactor.

<span class="mw-page-title-main">Sodium-cooled fast reactor</span> Type of nuclear reactor cooled by molten sodium

A sodium-cooled fast reactor is a fast neutron reactor cooled by liquid sodium.

<span class="mw-page-title-main">Steam generator (nuclear power)</span>

A steam generator is a heat exchanger used to convert water into steam from heat produced in a nuclear reactor core. They are used in pressurized water reactor between the primary and secondary coolant loops.

<span class="mw-page-title-main">VVER</span> Soviet / Russian nuclear reactor type

The water-water energetic reactor (WWER), or VVER is a series of pressurized water reactor designs originally developed in the Soviet Union, and now Russia, by OKB Gidropress. The idea of such a reactor was proposed at the Kurchatov Institute by Savely Moiseevich Feinberg. VVER were originally developed before the 1970s, and have been continually updated. As a result, the name VVER is associated with a wide variety of reactor designs spanning from generation I reactors to modern generation III+ reactor designs. Power output ranges from 70 to 1300 MWe, with designs of up to 1700 MWe in development. The first prototype VVER-210 was built at the Novovoronezh Nuclear Power Plant.

<span class="mw-page-title-main">Economic Simplified Boiling Water Reactor</span> Nuclear reactor design

The Economic Simplified Boiling Water Reactor (ESBWR) is a passively safe generation III+ reactor design derived from its predecessor, the Simplified Boiling Water Reactor (SBWR) and from the Advanced Boiling Water Reactor (ABWR). All are designs by GE Hitachi Nuclear Energy (GEH), and are based on previous Boiling Water Reactor designs.

<span class="mw-page-title-main">BN-600 reactor</span> Russian sodium-cooled fast breeder reactor

The BN-600 reactor is a sodium-cooled fast breeder reactor, built at the Beloyarsk Nuclear Power Station, in Zarechny, Sverdlovsk Oblast, Russia. It has a 600 MWe gross capacity and a 560 MWe net capacity, dispatched o the Middle Urals power grid. It has been in operation since 1980 and represents an evolution on the preceding BN-350 reactor. In 2014, its larger sister reactor, the BN-800 reactor began operation.

The three primary objectives of nuclear reactor safety systems as defined by the U.S. Nuclear Regulatory Commission are to shut down the reactor, maintain it in a shutdown condition and prevent the release of radioactive material.

<span class="mw-page-title-main">Small modular reactor</span> Small nuclear reactors that can be manufactured off-site and transported

Small modular reactors (SMRs) are a proposed class of nuclear fission reactors, smaller than conventional nuclear reactors, which can be built in one location, then shipped, commissioned, and operated at a separate site. The term SMR refers to the size, capacity and modular construction only, not to the reactor type and the nuclear process which is applied. Designs range from scaled down versions of existing designs to generation IV designs. Both thermal-neutron reactors and fast-neutron reactors have been proposed, along with molten salt and gas cooled reactor models.

The Energy Multiplier Module is a nuclear fission power reactor under development by General Atomics. It is a fast-neutron version of the Gas Turbine Modular Helium Reactor (GT-MHR) and is capable of converting spent nuclear fuel into electricity and industrial process heat.

<span class="mw-page-title-main">GE BWR</span> Type of commercial fission reactor

General Electric's BWR product line of boiling water reactors represents the designs of a relatively large (~18%) percentage of the commercial fission reactors around the world.

<span class="mw-page-title-main">Integral Molten Salt Reactor</span>

The Integral Molten Salt Reactor (IMSR) is a nuclear power plant design targeted at developing a commercial product for the small modular reactor (SMR) market. It employs molten salt reactor technology which is being developed by the Canadian company Terrestrial Energy. It is based closely on the denatured molten salt reactor (DMSR), a reactor design from Oak Ridge National Laboratory. It also incorporates elements found in the SmAHTR, a later design from the same laboratory. The IMSR belongs to the DMSR class of molten salt reactors (MSR) and hence is a "burner" reactor that employs a liquid fuel rather than a conventional solid fuel; this liquid contains the nuclear fuel and also serves as primary coolant.

A nuclear microreactor is a plug-and-play type of nuclear reactor which can be easily assembled and transported by road, rail or air. Microreactors are 100 to 1,000 times smaller than conventional nuclear reactors, and when compared with small modular reactors (SMRs), their capacity is between 1 and 20 megawatts whereas SMRs comes in the range from 20 to 300 megawatts. Due to their size, they can be deployed to locations such as isolated military bases or communities affected by natural disasters. It can operate as part of the grid, independent of the grid, or as part of a small grid for electricity generation and heat treatment. They are designed to provide resilient, non-carbon emitting, and independent power in challenging environments. The nuclear fuel source for the majority of the designs is "High-Assay Low-Enriched Uranium", or HALEU.

References

  1. 1 2 Simpson, Jack (17 March 2017). "Bechtel pulls out of mini-nuclear development". Construction News. Retrieved 18 March 2017.
  2. 1 2 Adams, Rod (13 March 2017). "Bechtel And BWXT Quietly Terminate mPower Reactor Project". Forbes. Retrieved 23 March 2017.
  3. ↑ Disavino, Scott; O'Grady, Eileen; Doggett, Tom (2009-06-10). "McDermott B&W unit unveils small nuclear reactor". Reuters . Retrieved 2012-02-17.
  4. 1 2 3 4 "B&W unveils modular nuclear power design". World Nuclear News. 2009-06-10. Retrieved 2012-02-17.
  5. ↑ "B&W, Bechtel team up on mPower". World Nuclear News. 2010-07-14. Retrieved 2012-02-17.
  6. ↑ "B&W to build mPower test facility". World Nuclear News. 2010-07-28. Retrieved 2012-02-17.
  7. ↑ "B&W awarded grant for mPower development". World Nuclear News. 2011-04-13. Retrieved 2012-02-17.
  8. ↑ "Babcock & Wilcox plans Virginia testing facility". Bloomberg Businessweek . Associated Press. 2010-07-27. Archived from the original on 2013-01-19. Retrieved 2012-02-17.
  9. ↑ Disavino, Scott (2011-06-16). "FACTBOX-U.S. proposed new nuclear power reactors". Reuters . Retrieved 2012-02-20.
  10. 1 2 "TVA progresses with mPower project". World Nuclear News. 2011-06-17. Retrieved 2012-02-17.
  11. ↑ "B&W, TVA Sign Contract for Clinch River mPower Construction Permit". Charlotte, NC: Babcock & Wilcox. February 20, 2013. Archived from the original (press release) on March 30, 2013. Retrieved February 20, 2013.
  12. ↑ Matthew L. Wald (February 20, 2013). "Deal Advances Development of a Smaller Nuclear Reactor". The New York Times. Retrieved February 21, 2013.
  13. ↑ "mPower empowered by SMR funds". November 21, 2012. Retrieved May 9, 2014.
  14. ↑ "SMR funding signed, sealed and delivered". April 16, 2013. Retrieved May 9, 2014.
  15. ↑ John Downey (28 February 2014). "No sale: Babcock & Wilcox can.t find buyer for Generation mPower". Charlotte Business Journal. Retrieved 17 April 2014.
  16. ↑ Adams, Roy (2014-06-20). "B&W mPower cover story about lack of interest is bogus". Atomic Insights. Retrieved 2020-01-09.
  17. ↑ "B&W scales back small reactor development". Nuclear Engineering International. 15 April 2014. Retrieved 16 April 2014.
  18. ↑ Carmel, Margaret (15 March 2017). "BWXT, Bechtel shelve mPower program". Roanoke Times. Retrieved 23 March 2017.
  19. 1 2 3 4 5 6 "Small Nuclear Power Reactors". World Nuclear Association. February 2012. Retrieved 2012-02-17.
  20. 1 2 "B&W mPower". Nuclear Regulatory Commission . Retrieved 2012-02-16.
  21. 1 2 Spring, Nancy (2010-01-01). "B&W mPower". Power Engineering . Pennwell Corporation . Retrieved 2012-02-16.
  22. ↑ Mansfield, Duncan (2009-06-10). "Babcock & Wilcox planning mini nuclear reactor". The Seattle Times . Associated Press . Retrieved 2012-02-17.
  23. ↑ Rosner, Robert; Lordan, Rebecca; Goldberg, Stephen (2011). "Moving to passive designs" (PDF). Bulletin of the Atomic Scientists. 67 (4): 27. Bibcode:2011BuAtS..67d..23R. doi:10.1177/0096340211413374. S2CID   144323935 . Retrieved 2012-02-21.[ permanent dead link ]
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.