Bergepanzer 2

Last updated

Bergepanzer 2
Bergepanzer 2 rightside.jpg
Bergepanzer 2 of the German Army
Type ARV
Place of origin West Germany
Service history
In service1966–present
Used bySee Operators
Production history
Designer Flag of Germany.svg Porsche
Flag of Germany.svg Jung Jungenthal
Flag of Germany.svg Atlas-MaK Maschinenbau
Flag of Germany.svg Luther-Werke
Designed1960s
Manufacturer Flag of Germany.svg Atlas-MaK Maschinenbau
Flag of Italy.svg OTO Melara [1]
Unit costDM 750.000 (1966)
Produced1966–1978
No. built742
VariantsSee Variants
Specifications
Mass39.8 tonnes (43.9 short tons)
2A2: 40.6 tonnes (44.8 short tons)
Length7.68 metres (25.2 feet)
Width3.25 m (10.7 ft)
Height2.69 m (8.8 ft) (crane boom retracted)
Crew4

Armor Steel: 10–40 mm RHAe
Main
armament
7.62 mm MG3
Secondary
armament
Smoke discharger
Engine MTU MB 838 CaM 500, 10-cylinder, 37.4 litres, multi-fuel engine
830 PS (820 hp) (2.86 kNm, 610 kW)
Power/weight20.9 PS/t (20.6 hp/t)
2A2: 20.4 PS/t (20.1 hp/t)
Transmission ZF Friedrichshafen 4 HP-250
Suspension Torsion bar suspension
Fuel capacity1,550 litres (341 imperial gallons; 409 US gallons)
2A1: 1,410 litres (310 imperial gallons; 372 US gallons)
Operational
range
850 km (530 mi)
Maximum speed 62 km/h (39 mph)

The Bergepanzer 2 is an armored recovery vehicle based on the Leopard 1 main battle tank, developed in the 1960s and manufactured by Atlas-MaK Maschinenbau for the West German army. It first entered service in 1966 and replaced the earlier Bergepanzer 1. Various versions have served in the armed forces of Germany and other countries. It was later succeeded by the Bergepanzer 3 "Büffel".

Contents

History

Predecessor Bergepanzer 1 Bergepanzer M88 auf Faun Zugmaschine.jpg
Predecessor Bergepanzer 1

The West German rearmament from the mid-1950s led to the initial equipping of the Bundeswehr with U.S. armored vehicles. In addition to M47 and M48 Patton main battle tanks, M74 Armored Recovery Vehicles were introduced, which, from 1962, were replaced by the M88 Recovery Vehicle, designated "Bergepanzer 1". [2] :2

Development

The Leopard 1 was designed from the outset as a family of vehicles. This was intended to significantly reduce the cost of operating, maintaining and repairing the tracked vehicles, since the personnel for many areas only required one-off training and the assemblies could be easily replaced.
Right after the Leopard, the armored recovery vehicle 2 was tackled. "Its main task is to recover or, as far as possible, repair on the spot tanks that have broken down on the battlefield due to enemy action or technical damage." [3]

On September 9, 1966, the first Bergepanzer Standard rolled off the production line at MaK Kiel. [3]

Variants

WiSENT 1

FFG offers the WiSENT in 3 different variants, the WiSENT 1 ARV, the WiSENT 1 AEV and the WiSENT 1 Mine Clearing. [4]

Technical data

Technical data
DescriptionBergepanzer 2 [2] Bergepanzer 2A1/Pionierpanzer 1Bergepanzer 2A2 [2] Bergepanzer "Wisent"
Type:Armored recovery vehicle with self-supporting hull, turretless superstructure and crane boom
Crew:4
Engine: MTU MB 838 CaM 500, 10-cylinder, 37.4 litres, multi-fuel engine
Displacement:37.400 cm³
Power output:610 kW (830 PS)706 kW (960 PS) 3300 Nm at 1600 min−1
Cooling:Thermostatically controlled axial fan
Transmission: ZF 4 HP-250 planetary gearbox with four forward and two reverse gears
Suspension system:Torsion bar spring mounted support roller driveTorsion bar spring mounted support roller drive with hydraulic dampers
Overall length:
(Clearing blade in driving position)
7570 mm7980 mm7680 mm8210 mm
Overall width:3250 mm
Overall height:2695 mm2970 mm (with topcase)
Ground clearance:440 mm
Wading depth without preparation:1200 mm
Wading depth with wading snorkel:2250 mm
Underwater driving depth w. underwater snorkel:4000 mm
Trench passability:2500 mm
Climbing ability:1150 mm880 mm1000 mm880 mm
Gradeability:60 %
Cross slope capability:30 %
Empty weight:39.200 kg40.200 kg39.980 kg47.000 kg
Combat weight:39.800 kg40.800 kg40.600 kg54.000 kg (max. 56.000 kg)
Maximum speed:62 km/h
Fuel capacity:1550 l1410 l1550 l
Fuel consumption and operating range (road):840 km at 165 l/100 km650 km at 165 l/100 km840 km at 165 l/100 km
Fuel consumption and operating range (terrain):400 km (2A1) bis 500 km at 300 l/100 km (Consumption above 400 l/100 km is not uncommon in towing operations)
Turning radius:496 cm
Clearing blade width:3250 mm3250 mm (3750 mm with increased width blade)3250 mm3250 mm (3750 mm with increased width blade)
Clearing blade height:591 mm995 mm591 mm995 mm
Armament:2 × 7.62×51mm NATO MG3 or C6 GPMG as anti aircraft gun and front gun, smoke dischargersmoke discharger, armament varies depending on user
Ammunition:4250 cartridges pverall for both MG3

Operators

Map with Bergepanzer 2 operators in blue and former operators in red Bergepanzer 2 operators.svg
Map with Bergepanzer 2 operators in blue and former operators in red

Current operators

Former operators

See also

Related Research Articles

<span class="mw-page-title-main">Leopard 1</span> Main battle tank family of German origin

The Kampfpanzer Leopard is a main battle tank designed by Porsche and manufactured by Krauss-Maffei in West Germany, first entering service in 1965. Developed in an era when HEAT warheads were thought to make conventional heavy armour of limited value, the Leopard design focused on effective firepower and mobility instead of heavy protection. It featured moderate armour, only effective against low caliber autocannons and heavy machine guns, giving it a high power-to-weight ratio. This, coupled with a modern suspension and drivetrain, gave the Leopard superior mobility and cross-country performance compared to most other main battle tanks of the era, only being rivaled by the French AMX-30 and Swedish Strv 103. The main armament of the Leopard consisted of a German license-built version of the British Royal Ordnance L7 105 mm rifled gun, one of the most effective and widespread tank guns of the era.

<i>Elefant</i> German heavy tank destroyer of World War II

Elefant was a heavy tank destroyer used by German Panzerjäger during World War II. Ninety-one units were built in 1943 under the name Ferdinand using VK 45.01 (P) tank hulls which had been produced for the Tiger I tank before the competing Henschel design had been selected.

<span class="mw-page-title-main">M113 armored personnel carrier</span> Armored personnel carrier

The M113 is a fully tracked armored personnel carrier (APC) that was developed and produced by the FMC Corporation. The M113 was sent to United States Army Europe in 1961 to replace the mechanized infantry's M59 APCs. The M113 was first used in combat in April 1962 after the United States provided the South Vietnamese army (ARVN) with heavy weaponry such as the M113, under the Military Assistance Command, Vietnam (MACV) program. Eventually, the M113 was the most widely used armored vehicle of the U.S. Army in the Vietnam War and was used to break through heavy thickets in the midst of the jungle to attack and overrun enemy positions. It was largely known as an "APC" or an "ACAV" by the allied forces.

<span class="mw-page-title-main">Mowag Piranha</span> Swiss armoured fighting vehicle

The Mowag Piranha is a family of armoured fighting vehicles designed by the Swiss company Mowag.

<span class="mw-page-title-main">Leopard 2</span> German main battle tank

The Leopard 2 is a third generation German main battle tank (MBT). Developed by Krauss-Maffei in the 1970s, the tank entered service in 1979 and replaced the earlier Leopard 1 as the main battle tank of the West German army. Various iterations of the Leopard 2 continue to be operated by the armed forces of Germany, as well as 13 other European countries, and several non-European countries, including Canada, Chile, Indonesia, and Singapore. Some operating countries have licensed the Leopard 2 design for local production and domestic development.

<span class="mw-page-title-main">Boxer (armoured fighting vehicle)</span> Multinational wheeled armoured fighting vehicle

The Boxer is a multirole armoured fighting vehicle designed by an international consortium to accomplish a number of operations through the use of installable mission modules. The governments participating in the Boxer programme have changed as the programme has developed. The Boxer vehicle is produced by the ARTEC GmbH industrial group, and the programme is being managed by OCCAR. ARTEC GmbH is based in Munich; its parent companies are Krauss-Maffei Wegmann GmbH and Rheinmetall Military Vehicles GmbH on the German side, and Rheinmetall Defence Nederland B.V. for the Netherlands. Overall, Rheinmetall has a 64% stake in the joint venture.

<span class="mw-page-title-main">PT-91 Twardy</span> Polish main battle tank

The PT-91 Twardy is a Polish main battle tank. A development of the T-72M1, it entered service in 1995. The PT-91 was designed at the OBRUM and is produced by the Bumar Łabędy company, part of the Bumar Group, a Polish technical military consortium. Changes from the T-72M include a new dual-axis stabilized fire-control system, reactive armour, a more powerful engine, transmission and new automatic loader.

<span class="mw-page-title-main">Marder (infantry fighting vehicle)</span> German infantry fighting vehicle

The Schützenpanzer Marder 1 is a tracked German infantry fighting vehicle designed for use with the West German Panzergrenadiere units, mechanized infantry specialized for IFV combat. It has been operated by the German Army as the main Panzergrenadiere IFV since the 1970s through to the present day. Developed as part of the rebuilding of West Germany's armoured fighting vehicle industry, the Marder has proven to be a successful and solid infantry fighting vehicle design.

<span class="mw-page-title-main">Flakpanzer Gepard</span> Self-propelled anti-aircraft gun

The Flugabwehrkanonenpanzer Gepard is an all-weather-capable German self-propelled anti-aircraft gun (SPAAG) based on the hull of the Leopard 1. It was developed in the 1960s, fielded in the 1970s, and has been upgraded several times with the latest electronics. It has been a cornerstone of the air defence of the German Army (Bundeswehr) and a number of other NATO countries.

<span class="mw-page-title-main">MG 3 machine gun</span> General-purpose machine gun

The MG 3 is a German general-purpose machine gun chambered for the 7.62×51mm NATO cartridge. The weapon's design is derived from the World War II era MG 42 that fired the 7.92×57mm Mauser round.

<span class="mw-page-title-main">Armoured recovery vehicle</span> Armoured vehicle for towing in combat conditions

An armoured recovery vehicle (ARV) is typically a powerful tank or armoured personnel carrier (APC) chassis modified for use during combat for military vehicle recovery (towing) or repair of battle-damaged, stuck, and/or inoperable armoured fighting vehicles, such as tanks and armoured personnel carriers. Most ARVs have motorized tracks, like a tank or bulldozer, enabling the ARV to operate on uneven ground. The term "Armoured Repair and Recovery Vehicle" (ARRV) is also used.

<span class="mw-page-title-main">AIFV</span> Infantry fighting vehicle

The AIFV is a US tracked light armored vehicle that serves as an infantry fighting vehicle (IFV) in the armies of several countries. It is a development of the M113A1 armored personnel carrier.

<span class="mw-page-title-main">M88 Recovery Vehicle</span> US Army tank repair and extraction vehicle

The M88 Recovery Vehicle is one of the largest armored recovery vehicles (ARV) in use by United States Armed Forces. There are three variants, the M88, the M88A1, and the M88A2 HERCULES. The M88 series has seen action in the Vietnam War, the Persian Gulf War, the Iraq War, and the War in Afghanistan, and to a lesser extent during the Kosovo War, where they were deployed to help recover heavy armored vehicles of the Allied ground units. As of 2000, the M88A2 replacement cost was around US$2,050,000.

<span class="mw-page-title-main">M74 Armored Recovery Vehicle</span> Armored recovery vehicle

The M74 tank recovery vehicle (M74) was an engineer vehicle used by the U.S. Army in the 1950s. It was designed to cope with the heavier weights of the M26 Pershing and M47 Patton. It could also be suitable for light dozing, since it had a hydraulic, front-mounted spade. 1126 were produced by Bowen-McLaughlin-York by converting M4A3 Sherman tanks starting in 1954. From 1956, 60 M32B3A1s were converted by Rock Island Arsenal until 1958.

The Flensburger Fahrzeugbau Gesellschaft mbH (FFG) is a medium-sized company based in Flensburg, Germany. It operates in the military vehicle manufacturing, maintenance, and upgrade business sectors.

<span class="mw-page-title-main">Tanks of the Ukrainian Army</span> Main battle tank

Tanks of the Ukrainian Army have been used within the military, with their usage and origin after the Cold War; and the modern era. This includes tanks manufactured in Ukraine, leftover Soviet tanks in the Ukrainian Ground Forces today as well as designs imported from other countries and tanks captured in the Russo-Ukrainian War.

References

  1. 1 2 Foss, Christopher F., ed. (2005). Jane's Armour and Artillery: 2005-2006. Jane's Information Group. p. 43. ISBN   978-0-71-062686-8. OCLC   452263052.
  2. 1 2 3 4 5 6 Marx, Stefan (2004). Die Bergepanzer der Bundeswehr und die deutsche Bergetechnik. Tankograd Militärfahrzeuge Spezial (in German). Vol. 5004. Tankograd Publishing.
  3. 1 2 Haslinger, Thomas (July 2015). "IV.2: Veränderungen im Beschaffungsprozess der Bundeswehr und die Einsetzung von Generalunternehmern bei neuen Rüstungsprojekten". Bundeswehr und Ausrüstung: Die Beschaffung der Fahrzeugfamilien des Kampfpanzers LEOPARD 1 und des Schützenpanzers MARDER in den 1960er Jahren im Spannungsfeld zwischen Politik, Bundeswehr und Rüstungsindustrie (PDF) (Dr.) (in German). Ludwig-Maximilians-Universität München. p. 175. doi:10.5282/edoc.19709.
  4. "WiSENT 1 – THE UPGRADE FOR THE ARV 2 STANDARD". FFG Flensburger Fahrzeugbau GmbH. Retrieved 11 November 2022.
  5. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 International Institute for Strategic Studies (2021). The Military Balance 2021. Routledge. doi:10.4324/9781003177777. ISBN   978-1-03-201227-8. ISSN   0459-7222. S2CID   241415678.
  6. International Institute for Strategic Studies (2022). The Military Balance 2022. Routledge. p. 155. ISBN   978-1-032-27900-8. ISSN   0459-7222.
  7. "Military support for Ukraine | Federal Government". Website of the Federal Government | Bundesregierung. 26 February 2024. Retrieved 26 February 2024.
  8. "Norway delivers 8 Leopard 2 tanks to Ukraine". Euromaidan Press. 21 March 2023.
  9. "Heavy weapons tracking sheet". Google Docs. Retrieved 26 February 2024.
  10. Oryx. "Attack On Europe: Documenting Ukrainian Equipment Losses During The Russian Invasion Of Ukraine". Oryx. Retrieved 26 February 2024.
  11. Mollison, Maj Y.M. (2016). "VEHICLE RECOVERY OPTIONS FOR 2016 TO 2025" (PDF). Canadian Forces College. Retrieved 11 November 2022.