Bertone Ramarro

Last updated
Bertone Ramarro
Bertone Ramarro (24956769266).jpg
Overview
Manufacturer Bertone
Also calledBertone Corvette Ramarro
Production1984
1 built
Designer Eugenio Pagliano and Marc Deschamps at Bertone
Body and chassis
Class Concept car
Body style 2-door coupé
Layout Front-engine, rear-wheel-drive
Doors Sliding doors
Related Chevrolet Corvette (C4)
Powertrain
Engine 350 cu in (5.7 L) Chevrolet L98 V8
Transmission 4-speed automatic
Dimensions
Wheelbase 2,440 mm (96.1 in)
Length4,150 mm (163.4 in)
Width1,920 mm (75.6 in)
Height1,190 mm (46.9 in)
Curb weight 1,400 kg (3,086 lb)

The Bertone Ramarro is an Italian concept car designed and built by Bertone and based on the Chevrolet Corvette (C4). It debuted in 1984 at the Los Angeles Auto Show. The name "ramarro" comes from the Italian word for "green lizard". [1]

Contents

Specifications

Full size model of the Ramarro being worked on at Bertone's Stile SpA facility in Caprie 1984 Bertone people and Chevrolet Camaro.jpg
Full size model of the Ramarro being worked on at Bertone's Stile SpA facility in Caprie

The Ramarro uses the chassis from a 1984 C4 Corvette, the same car used to unveil the C4 to the European press at the 1983 Geneva Motor Show. Chevrolet gave Bertone that car to use to build the Ramarro, as well as a port fuel injection V8 engine from the newer 1985 Corvette. [2] The engine remains mostly stock but the radiator and air conditioning have been moved to the back of the car, taking the place of the spare tire which was moved in front of the engine, in order to allow Bertone to design the body with a more tapered, sealed off nose for better airflow and aerodynamics. [1] In order to get air into the radiator, air intakes were placed just behind the rear window on both sides. The only other mechanical change was the addition of experimental Michelin tyres in place of the original Goodyear units. These new tyres measure 280/45VR-17 in the rear and 240/45VR-17 in the front. [2] On the outside, the Ramarro also features sliding doors that slide forward towards the nose of the car, making them easier to open in tight parking spots versus conventional doors which had a wide opening span. [3] Many reviewers have drawn a comparison between these and the doors on the 1954 Kaiser Darrin but the Ramarro's doors are different in that they slide out and forwards whereas the doors on the Darrin retracted into the front fenders. [4]

Interior

The interior of the Ramarro retains the Corvette's factory digital instrumentation and emergency brake handle but most of the original interior has been replaced by custom pieces. The concept features a sculpted single piece bucket seat that moves as one seat but has a hump in the middle for the center console. The interior was retrimmed in specially patterned green leather that was picked to match the exterior and also to resemble the colour and texture of lizard skin, a nod to the Ramarro name. Finally, the Corvette's original automatic transmission was kept but the shift lever was replaced by a large rotary dial gear selector in the center console. [4]

History

Rear view Bertone157 (41916566752).jpg
Rear view

Nuccio Bertone reportedly started the Ramarro project because it presented a challenge, and because most of the cars with Bertone designed bodies were sold in America, yet they featured the name of the automaker first and Bertone second, so Bertone wanted to have a car to show in America which bore the "Bertone" name first and foremost. [2]

Reception

Bertone originally intended to unveil the car at the Turin Auto Show in the spring of 1984 but the show ended up being rescheduled to a few months later and since the Ramarro was based on the American Corvette, they made the decision to unveil it at the 1984 LA Auto Show instead. [4] The Ramarro was well received at the show and later in 1985 was awarded Auto&Design's Car Design Award for its “bold ideas,” which they say gave “the Chevrolet Corvette an entirely new personality.” [5]

Related Research Articles

<span class="mw-page-title-main">Chevrolet Corvette</span> American sports car by the Chevrolet division of General Motors (GM)

The Chevrolet Corvette is a line of American two-door, two-seater sports cars manufactured and marketed by General Motors under the Chevrolet marque since 1953.

<span class="mw-page-title-main">Lamborghini Espada</span> Motor vehicle

The Lamborghini Espada is a 4-seat grand touring coupé built by Italian car manufacturer Lamborghini between 1968 and 1978.

<span class="mw-page-title-main">Gordon-Keeble</span> Motor vehicle

Gordon-Keeble was a British car marque, conceived in Slough, then constructed in Eastleigh, and finally in Southampton, between 1964 and 1967. The marque's badge was unusual in featuring a tortoise — a pet tortoise walked into the frame of an inaugural photo-shoot, taken in the grounds of the makers. Because of the irony the animal was chosen as the emblem.

The Pontiac Banshee is a line of concept cars designed by Pontiac, assuming the role previously established by General Motors' Firebirds of the 1950s. Four Banshee "dream cars" were fabricated through 1988 as design exercises intended to establish exterior and interior themes that could be modified for production versions of Pontiac sports and performance cars. Banshee was also the leading candidate for Pontiac's version of the Camaro before being named Firebird in light of any deathly associations of the word Banshee.

<span class="mw-page-title-main">Chevrolet Corvette (C6)</span> Sixth generation of the Corvette sports car

The Chevrolet Corvette (C6) is the sixth generation of the Corvette sports car that was produced by Chevrolet division of General Motors for the 2005 to 2013 model years. It is the first Corvette with exposed headlamps since the 1962 model. Production variants include the Z06, ZR1, Grand Sport, and 427 Convertible. Racing variants include the C6.R, an American Le Mans Series GT1 championship and 24 Hours of Le Mans GTE-Pro winner.

<span class="mw-page-title-main">Chevrolet Nomad</span> Motor vehicle

Chevrolet Nomad is a nameplate used by Chevrolet in North America from the 1950s to the 1970s, applied largely to station wagons. Three different Nomads were produced as a distinct model line, with Chevrolet subsequently using the name as a trim package.

<span class="mw-page-title-main">Bertone Genesis</span> Concept car designed by Bertone

The Bertone Genesis or sometimes referred to as the Lamborghini Genesis was a Bertone designed concept car using Lamborghini parts. It was first displayed to the public at the 1988 Turin Auto Show.

<span class="mw-page-title-main">Chevrolet Corvette (C3)</span> Motor vehicle

The Chevrolet Corvette (C3) is the third generation of the Corvette sports car that was produced from 1967 until 1982 by Chevrolet for the 1968 to 1982 model years. Engines and chassis components were mostly carried over from the previous generation, but the body and interior were new. It set new sales records with 53,807 produced for the 1979 model year. The C3 is the third generation of the Chevrolet Corvette, and marks the second time the Corvette would carry the Stingray name, though only for the 1969–76 model years. This time it was a single word as opposed to Sting Ray as used for the 1963–67 C2 generation. The name would then be retired until 2014 when it returned with the release of the C7.

<span class="mw-page-title-main">Chevrolet Corvette (C4)</span> Fourth generation of the Corvette sports car

The Chevrolet Corvette (C4) is the fourth generation of the Corvette sports car, produced by American automobile manufacturer Chevrolet from 1983 until 1996. The convertible returned, as did higher performance engines, exemplified by the 375 hp (280 kW) LT5 found in the ZR1. In early March 1990, the ZR1 would set new records for the highest average speed over 24 hours at over 175 mph (282 km/h) and highest average speed over 5,000 miles at over 173 mph (278 km/h). With a completely new chassis, modern sleeker styling, and other improvements to the model, prices rose and sales declined. The last C4 was produced on June 20, 1996.

<span class="mw-page-title-main">Lexus LF</span> Concept Car Series

The Lexus LF line is a series of concept cars built by Lexus, the luxury vehicle division of Toyota Motor Corporation. The "LF" designation refers to Lexus Future. The LF Series vehicles features coupes/convertibles, including: the LF-A, the LF-A Roadster, LF-LC, LF-CC, and the LF-C; sedans: the LF-S, LF-Sh, and LF-Gh; crossover SUVs: the LF-X and LF-Xh; and hatchbacks: the LF-Ch. The first concept vehicle of the LF Series, the LF-X, appeared in 2003. The LF Series utilizes L-finesse, a design philosophy named for "Leading Edge" and "finesse", which debuted on the LF Series concepts and later extended to all new production Lexus vehicles. New vehicle technologies on the LF Series include advanced instrumentation, multiple driver-selected vehicle configurations, hybrid and experimental powertrains, and unconventional driver interface designs. The vehicles also feature new design cues which derive from the L-finesse design language of "Intriguing Elegance" (純), "Incisive Simplicity" (妙), and "Seamless Anticipation" (予). Several of the LF concept vehicles have appeared close to their production counterparts, while the design cues of other LF concepts appeared on more distinctly different production vehicles.

<span class="mw-page-title-main">Kaiser Darrin</span> Motor vehicle

The Kaiser Darrin, also known as the Kaiser Darrin 161 or in short as the Darrin, was an American sports car designed by Howard "Dutch" Darrin and built by Kaiser Motors for the 1954 model year. Essentially a revamp of Kaiser's Henry J compact, the Kaiser Darrin was one of its designer's final achievements and was noted for being the second American car equipped with a fiberglass body and doors that slid on tracks into the front fender wells. The car was named both for Henry J. Kaiser, head of Kaiser Motors, and Darrin.

<span class="mw-page-title-main">Chevrolet Europe</span> Former subsidiary company of GM Korea

Chevrolet Europe GmbH was a subsidiary company of GM Korea, founded in 2005, with headquarters in Zürich, Switzerland. It provided Chevrolet brand automobiles, most of which were made in South Korea for the European market.

<span class="mw-page-title-main">Chevrolet Camaro (fifth generation)</span> Motor vehicle

The fifth-generation Chevrolet Camaro is a pony car that was manufactured by American automobile manufacturer Chevrolet from 2010 to 2015 model years. It is the fifth distinct generation of the muscle/pony car to be produced since its original introduction in 1967. Production of the fifth generation model began on March 16, 2009 after several years on hiatus since the previous generation's production ended in 2002 and went on sale to the public in April 2009 for the 2010 model year.

<span class="mw-page-title-main">Giugiaro Ford Mustang</span> Motor vehicle

The Giugiaro Mustang is a concept car based on the production fifth generation Ford Mustang that debuted at the 2006 Los Angeles International Auto Show. It was designed by Italdesign Giugiaro under Fabrizio Giugiaro, Giorgetto Giugiaro's son. The 2015 Ford Mustang takes many design cues from the concept car.

<span class="mw-page-title-main">Chevrolet Corvair Monza GT</span> Motor vehicle

The ChevroletCorvair Monza GT (XP-777) was a mid-engine experimental prototype automobile built by General Motors in 1962 and based on the early model Chevrolet Corvair series. As it was essentially a concept car, the Monza GT did not enter production.

<span class="mw-page-title-main">Chevrolet Aveo</span> Subcompact car

The Chevrolet Aveo is a five-passenger, front-drive subcompact car (B-segment) marketed by General Motors (GM) since 2002 over two generations. Originally developed by South Korean manufacturer Daewoo Motors and marketed as the Daewoo Kalos, the takeover of Daewoo by GM to form GM Daewoo Auto & Technology (GMDAT) resulted in the car's marketing in 120 countries under seven brands — prominently as the Chevrolet Aveo.

<span class="mw-page-title-main">Chevrolet Corvette (C7)</span> Seventh generation of the Corvette sports car

The Chevrolet Corvette (C7) is the seventh generation of the Corvette sports car manufactured by American automobile manufacturer Chevrolet from 2014 until 2019. The first C7 Corvettes were delivered in the third quarter of 2013. The racing variants include the C7.R, which won the GTLM 24 Hours of Le Mans.

<span class="mw-page-title-main">Oldsmobile Golden Rocket</span> Motor vehicle

The Oldsmobile Golden Rocket was a two-seater show car built by Oldsmobile for the 1956 General Motors Motorama. The radically styled fiberglass concept, designed to resemble a rocket on wheels, was revised several times and displayed at various other auto shows, most notably at the 1957 Paris Motor Show where it generated much fanfare, 18 months after it was first revealed. The car was featured in the promotional short film Design for Dreaming along with the rest of the 1956 General Motors lineup.

The Chevrolet Corvette Super Sport is a one-off show car built by the Chevrolet division of General Motors (GM). Described as a 1957 model, it was first shown in December 1956 in New York City.

GMC concept vehicles produced between 2000 and 2019 include:

References

  1. 1 2 "1984 Bertone Ramarro Corvette: The concept we forgot". news.yahoo.com. Retrieved 2019-08-05.
  2. 1 2 3 Lamm, John (2016-11-26). "This Is the 1984 Corvette Reimagined by Italy". Road & Track. Retrieved 2019-08-05.
  3. Corvette, Chevrolet. "1984 Bertone Ramarro Corvette: Concept We Forgot". Motor1.com. Retrieved 2019-08-05.
  4. 1 2 3 Peek, Jeff. "Bertone Ramarro: Italy's unmistakable, unforgettable custom Corvette". www.hagerty.com. Retrieved 2019-08-05.
  5. "ARCHIVIO PROTOTIPI | BERTONE CHEVROLET RAMARRO". www.archivioprototipi.it. Retrieved 2019-08-05.