Carbon profiling

Last updated

Carbon profiling [1] is a mathematical process that calculates how much carbon dioxide is put into the atmosphere per m2 of space in a building over one year. The analysis has two parts that are added together to produce an overall figure that is termed the 'carbon profile':

Contents

Embodied carbon emissions

Embodied carbon emissions relate to the amount of carbon dioxide emitted into the atmosphere from creating and maintaining the materials that form a building, [3] e.g. the carbon dioxide released from the baking of bricks or smelting of iron. These emissions can also be considered to be Upfront Carbon Emissions, or UCE. [3] “Embodied carbon refers to the carbon footprint associated with building materials, from cradle to grave," and can be quantified as a part of environmental impact using life-cycle assessment (LCA). [4]

In the Carbon Profiling Model these emissions are measured as Embodied Carbon Efficiency (ECE), measured as kg of CO2/m2/year.

As of 2018, "Embodied carbon is responsible 11% of global GHG emissions and 28% of global building sector emissions ... Embodied carbon will be responsible for almost half of total new construction emissions between now and 2050." [5] Zero-carbon architecture (similar to zero-energy building), incorporates design techniques that maximize embodied carbon. [6]

Steve Webb, co-founder of Webb Yates Engineers, says: "We’ve known for a long time that aluminium, steel, concrete and ceramics have very high embodied energy ... High carbon frames should be taxed like cigarettes. There should be a presumption in favour of timber and stone." [7]

Occupational carbon emissions

Occupational carbon emissions relate to the amount of carbon dioxide emitted into the atmosphere from the direct use of energy to run the building e.g. the heating or electricity used by the building over the year. In the Carbon Profiling Model these emissions are measured in BER’s (Building Emission Rate) in kg of CO2/m2/year.

The BER is a United Kingdom government accepted unit of measurement that comes from an approved calculation process called sBEM (Simplified Building Emission Model)

The purpose of Carbon Profiling [1] is to provide a method of analyzing and comparing both operational and embodied carbon emissions at the same time. With this information it is then possible to allocate a project's resources in such a way to minimize the total amount of Carbon Dioxide emitted into the atmosphere through the use of a given piece of space.

A secondary benefit is that having quantified the Carbon Profiling [1] of different buildings it is then possible to make comparisons and rank buildings in term of their performance. This allows investors and occupiers to identify which building are good and bad carbon investments.

Simon Sturgis and Gareth Roberts of Sturgis Associates in the United Kingdom originally developed ‘Carbon Profiling’ in December 2007.

Related Research Articles

<span class="mw-page-title-main">Greenhouse effect</span> Atmospheric phenomenon causing planetary warming

The greenhouse effect occurs when greenhouse gases in a planet's atmosphere trap some of the heat radiated from the planet's surface, raising its temperature. This process happens because stars emit shortwave radiation that passes through greenhouse gases, but planets emit longwave radiation that is partly absorbed by greenhouse gases. That difference reduces the rate at which a planet can cool off in response to being warmed by its host star. Adding to greenhouse gases further reduces the rate a planet emits radiation to space, raising its average surface temperature.

<span class="mw-page-title-main">Global warming potential</span> Potential heat absorbed by a greenhouse gas

Global warming potential (GWP) is an index to measure of how much infrared thermal radiation a greenhouse gas would absorb over a given time frame after it has been added to the atmosphere. The GWP makes different greenhouse gases comparable with regards to their "effectiveness in causing radiative forcing". It is expressed as a multiple of the radiation that would be absorbed by the same mass of added carbon dioxide, which is taken as a reference gas. Therefore, the GWP is one for CO2. For other gases it depends on how strongly the gas absorbs infrared thermal radiation, how quickly the gas leaves the atmosphere, and the time frame being considered.

<span class="mw-page-title-main">Embodied energy</span> Sum of all the energy required to produce any goods or services

Embodied energy is the sum of all the energy required to produce any goods or services, considered as if that energy were incorporated or 'embodied' in the product itself. The concept can be useful in determining the effectiveness of energy-producing or energy saving devices, or the "real" replacement cost of a building, and, because energy-inputs usually entail greenhouse gas emissions, in deciding whether a product contributes to or mitigates global warming. One fundamental purpose for measuring this quantity is to compare the amount of energy produced or saved by the product in question to the amount of energy consumed in producing it.

<span class="mw-page-title-main">Coal pollution mitigation</span>

Coal pollution mitigation, sometimes labeled as clean coal, is a series of systems and technologies that seek to mitigate health and environmental impact of burning coal for energy. Burning coal releases harmful substances, including mercury, lead, sulfur dioxide (SO2), nitrogen oxides (NOx), and carbon dioxide (CO2), contributing to air pollution, acid rain, and greenhouse gas emissions. Methods include flue-gas desulfurization, selective catalytic reduction, electrostatic precipitators, and fly ash reduction focusing on reducing the emissions of these harmful substances. These measures aim to reduce coal's impact on human health and the environment.

<span class="mw-page-title-main">Outgoing longwave radiation</span> Energy transfer mechanism which enables planetary cooling

In climate science, longwave radiation (LWR) is electromagnetic thermal radiation emitted by Earth's surface, atmosphere, and clouds. It may also be referred to as terrestrial radiation. This radiation is in the infrared portion of the spectrum, but is distinct from the shortwave (SW) near-infrared radiation found in sunlight.

<span class="mw-page-title-main">Greenhouse gas emissions</span> Sources and amounts of greenhouse gases emitted to the atmosphere from human activities

Greenhouse gas (GHG) emissions from human activities intensify the greenhouse effect. This contributes to climate change. Carbon dioxide, from burning fossil fuels such as coal, oil, and natural gas, is one of the most important factors in causing climate change. The largest emitters are China followed by the United States. The United States has higher emissions per capita. The main producers fueling the emissions globally are large oil and gas companies. Emissions from human activities have increased atmospheric carbon dioxide by about 50% over pre-industrial levels. The growing levels of emissions have varied, but have been consistent among all greenhouse gases. Emissions in the 2010s averaged 56 billion tons a year, higher than any decade before. Total cumulative emissions from 1870 to 2017 were 425±20 GtC from fossil fuels and industry, and 180±60 GtC from land use change. Land-use change, such as deforestation, caused about 31% of cumulative emissions over 1870–2017, coal 32%, oil 25%, and gas 10%.

<span class="mw-page-title-main">Carbon dioxide in Earth's atmosphere</span> Atmospheric constituent and greenhouse gas

In Earth's atmosphere, carbon dioxide is a trace gas that plays an integral part in the greenhouse effect, carbon cycle, photosynthesis and oceanic carbon cycle. It is one of several greenhouse gases in the atmosphere of Earth. The current global average concentration of CO2 in the atmosphere is 421 ppm as of May 2022 (0.04%). This is an increase of 50% since the start of the Industrial Revolution, up from 280 ppm during the 10,000 years prior to the mid-18th century. The increase is due to human activity. Burning fossil fuels is the main cause of these increased CO2 concentrations and also the main cause of climate change. Other large anthropogenic sources include cement production, deforestation, and biomass burning.

<span class="mw-page-title-main">Greenhouse gas emissions by the United States</span> Climate changing gases from the North American country

The United States produced 5.2 billion metric tons of carbon dioxide equivalent greenhouse gas (GHG) emissions in 2020, the second largest in the world after greenhouse gas emissions by China and among the countries with the highest greenhouse gas emissions per person. In 2019 China is estimated to have emitted 27% of world GHG, followed by the United States with 11%, then India with 6.6%. In total the United States has emitted a quarter of world GHG, more than any other country. Annual emissions are over 15 tons per person and, amongst the top eight emitters, is the highest country by greenhouse gas emissions per person. However, the IEA estimates that the richest decile in the US emits over 55 tonnes of CO2 per capita each year. Because coal-fired power stations are gradually shutting down, in the 2010s emissions from electricity generation fell to second place behind transportation which is now the largest single source. In 2020, 27% of the GHG emissions of the United States were from transportation, 25% from electricity, 24% from industry, 13% from commercial and residential buildings and 11% from agriculture. In 2021, the electric power sector was the second largest source of U.S. greenhouse gas emissions, accounting for 25% of the U.S. total. These greenhouse gas emissions are contributing to climate change in the United States, as well as worldwide.

Carbon monitoring as part of greenhouse gas monitoring refers to tracking how much carbon dioxide or methane is produced by a particular activity at a particular time. For example, it may refer to tracking methane emissions from agriculture, or carbon dioxide emissions from land use changes, such as deforestation, or from burning fossil fuels, whether in a power plant, automobile, or other device. Because carbon dioxide is the greenhouse gas emitted in the largest quantities, and methane is an even more potent greenhouse gas, monitoring carbon emissions is widely seen as crucial to any effort to reduce emissions and thereby slow climate change.

One way of attributing greenhouse gas (GHG) emissions is to measure the embedded emissions of goods that are being consumed. This is different from the question of to what extent the policies of one country to reduce emissions affect emissions in other countries. The UNFCCC measures emissions according to production, rather than consumption. Consequently, embedded emissions on imported goods are attributed to the exporting, rather than the importing, country. The question of whether to measure emissions on production instead of consumption is partly an issue of equity, i.e., who is responsible for emissions.

<span class="mw-page-title-main">Greenhouse gas emissions by the United Kingdom</span> Overview of the greenhouse gas emissions by United Kingdom

In 2021, net greenhouse gas (GHG) emissions in the United Kingdom (UK) were 427 million tonnes (Mt) carbon dioxide equivalent, 80% of which was carbon dioxide itself. Emissions increased by 5% in 2021 with the easing of COVID-19 restrictions, primarily due to the extra road transport. The UK has over time emitted about 3% of the world total human caused CO2, with a current rate under 1%, although the population is less than 1%.

The atmospheric carbon cycle accounts for the exchange of gaseous carbon compounds, primarily carbon dioxide, between Earth's atmosphere, the oceans, and the terrestrial biosphere. It is one of the faster components of the planet's overall carbon cycle, supporting the exchange of more than 200 billion tons of carbon in and out of the atmosphere throughout the course of each year. Atmospheric concentrations of CO2 remain stable over longer timescales only when there exists a balance between these two flows. Methane, Carbon monoxide (CO), and other man-made compounds are present in smaller concentrations and are also part of the atmospheric carbon cycle.

<span class="mw-page-title-main">Carbon budget</span> Limit on carbon dioxide emission for a given climate impact

A carbon budget is a concept used in climate policy to help set emissions reduction targets in a fair and effective way. It looks at "the maximum amount of cumulative net global anthropogenic carbon dioxide emissions that would result in limiting global warming to a given level". When expressed relative to the pre-industrial period it is referred to as the total carbon budget, and when expressed from a recent specified date it is referred to as the remaining carbon budget.

<span class="mw-page-title-main">Greenhouse gas emissions by Russia</span> Greenhouse gas emissions originating from Russia and efforts to reduce them

Greenhouse gas emissionsbyRussia are mostly from fossil gas, oil and coal. Russia emits 2 or 3 billion tonnes CO2eq of greenhouse gases each year; about 4% of world emissions. Annual carbon dioxide emissions alone are about 12 tons per person, more than double the world average. Cutting greenhouse gas emissions, and therefore air pollution in Russia, would have health benefits greater than the cost. The country is the world's biggest methane emitter, and 4 billion dollars worth of methane was estimated to leak in 2019/20.

Carbon negative architecture is architecture whose construction, operation and eventual demolition results in more atmospheric carbon and greenhouse gasses removed from the atmosphere than that which is emitted as consequence of the same. This is achieved by rigorous planning, regenerative architectural design and on-site carbon sequestration. Such buildings go beyond the carbon-neutral or net-zero approach, which simply means that buildings can still emit CO2 as long as the operators offset (or remove) those emissions from the atmosphere by the same amount in other places.

The time value of carbon is a conjecture that there is a greater benefit from reducing carbon dioxide or other greenhouse gas reduction immediately than reducing the same amount of emissions in the future. According to this conjecture, carbon emissions are subject to a discount rate, similar to money, which means that the timing of carbon emissions is important to consider alongside their magnitude. This is not to be confused with the monetary discount rate applied to carbon emission or carbon sequestration projects. Rather, it is a discount rate applied to the physical carbon itself.

References

  1. 1 2 3 ‘Carbon Profiling’ was published in The Architects Journal on the 26.03.09
  2. 1 2 Hurst, Will; Jessel, Ella; Waite, Richard (28 February 2019). "Why architects need to wake up to the carbon emergency". Architects Journal. Retrieved 2019-08-10.
  3. 1 2 Alter, Lloyd (April 1, 2019). "Let's rename "Embodied Carbon" to "Upfront Carbon Emissions"". TreeHugger. Retrieved 2019-08-10.
  4. Pak, Anthony (2019-07-04). "Embodied Carbon: The Blindspot of the Buildings Industry". Canadian Architect. Retrieved 2019-08-10.
  5. "New Buildings: Embodied Carbon". Architecture 2030. Retrieved 2019-08-10.
  6. Leddy, Bill. "Zero Carbon Architecture: the Business Case". arcCA Digest. Retrieved 2019-08-10.
  7. Webb, Steve (13 September 2019). "Time to stop tinkering with global warming". RIBA Journal. Archived from the original on 2019-09-22. Retrieved 2019-10-14.

Further reading