Combined Nomenclature

Last updated

Council Regulation (EEC) No 2658/87 of 23 July 1987, creates the goods nomenclature called the Combined Nomenclature, or in abbreviated form 'CN', established to meet, at one and the same time, the requirements both of the Common Customs Tariff and of the external trade statistics of the European Union. [1] It is closely related to the Harmonized Tariff Schedule of the United States.

Contents

These categories are based on the international Harmonized System, the global system of nomenclature that is used to describe most world trade in goods, maintained by the World Customs Organization (WCO). [2] Virtually all countries base their tariff schedules on the WCO's Harmonized System.

Synopsis

The codes and the descriptions of goods established on the basis of the combined nomenclature shall replace those established on the basis of the nomenclatures of the Common Customs Tariff and the Nimexe.

It is established on the basis of the Harmonized System. The combined nomenclature shall comprise : (a) the harmonized system nomenclature; (b) Community subdivisions to that nomenclature, referred to as 'CN subheadings' in those cases where a corresponding rate of duty is specified; (c) preliminary provisions, additional section or chapter notes and footnotes relating to CN subheadings.

Each CN subheading shall have an eight digit code number : (a) the first six digits shall be the code numbers relating to the headings and subheadings of the harmonized system nomenclature; (b) the seventh and eighth digits shall identify the CN subheadings.

The commission established an integrated tariff, of the European Communities, referred to as the 'TARIC code', based on the combined nomenclature.

The combined nomenclature, together with the rates of duty and other relevant charges, and the tariff measures included in the Taric or in other Community arrangements shall constitute the common customs tariff referred to in Article 9 of the Treaty, which shall be applied on the importation of goods into the Community

Member States may insert subdivisions after the CN subheadings for national statistical purposes, and after the Taric subheadings for other national purposes.

The Commission shall be assisted by a Committee on Tariff and Statistical Nomenclature, called the 'Nomenclature Committee'.

'Favourable tariff arrangement' means any reduction or suspension, even under a tariff quota, of a customs duty or charge having equivalent effect or of an agricultural levy or other import charge provided for under the common agricultural policy or under the specific arrangements applicable to certain goods resulting form the processing of agricultural products.

Commission shall adopt each year by means of a Regulation a complete version of the combined nomenclature together with the corresponding autonomous and conventional rates of duty of the Common Customs Tariff, as it results from measures adopted by the council or by the commission. said Regulation shall be published not later than 31 October in the Official Journal of the European Communities and it shall apply from 1 January of the following year.

List of published versions of the Combined Nomenclature
Applies fromPublished inTitle
1 January 2019 OJEU, L 273, 31 October 2018 Commission Implementing Regulation (EU) 2018/1602 of 11 October 2018
1 January 2020 OJEU, L 280, 31 October 2019 Commission Implementing Regulation (EU) 2019/1776 of 9 October 2019
1 January 2021 OJEU, L 361, 30 October 2020 Commission Implementing Regulation (EU) 2020/1577 of 21 September 2020
1 January 2022 OJEU, L 385, 29 October 2021 Commission Implementing Regulation (EU) 2021/1832 of 12 October 2021
1 January 2023 OJEU, L 282, 31 October 2022 Commission Implementing Regulation (EU) 2022/1998 of 20 September 2022

History

CN code 2710 goods exported out of Russia were the subject of an embargo price cap starting on 4 February 2023 as a result of the 2022 Russian invasion of Ukraine. [3]

Related Research Articles

<span class="mw-page-title-main">Free trade area</span> Regional trade agreement

A free trade area is the region encompassing a trade bloc whose member countries have signed a free trade agreement (FTA). Such agreements involve cooperation between at least two countries to reduce trade barriers, import quotas and tariffs, and to increase trade of goods and services with each other. If natural persons are also free to move between the countries, in addition to a free trade agreement, it would also be considered an open border. It can be considered the second stage of economic integration.

<span class="mw-page-title-main">Single market</span> Type of trade bloc with most trade barriers removed

A single market is a type of trade bloc in which most trade barriers have been removed with some common policies on product regulation, and freedom of movement of the factors of production and of enterprise and services. The goal is that the movement of capital, labour, goods, and services between the members is as easy as within them. The physical (borders), technical (standards) and fiscal (taxes) barriers among the member states are removed to the maximum extent possible. These barriers obstruct the freedom of movement of the four factors of production.

A tariff is a tax imposed by the government of a country or by a supranational union on imports or exports of goods. Besides being a source of revenue for the government, import duties can also be a form of regulation of foreign trade and policy that taxes foreign products to encourage or safeguard domestic industry. Protective tariffs are among the most widely used instruments of protectionism, along with import quotas and export quotas and other non-tariff barriers to trade.

<span class="mw-page-title-main">Customs</span> Government agency which regulates the flow of goods and collects duties

Customs is an authority or agency in a country responsible for collecting tariffs and for controlling the flow of goods, including animals, transports, personal effects, and hazardous items, into and out of a country. Traditionally, customs has been considered as the fiscal subject that charges customs duties and other taxes on import and export. In recent decades, the views on the functions of customs have considerably expanded and now covers three basic issues: taxation, security, and trade facilitation.

<span class="mw-page-title-main">World Customs Organization</span> Intergovernmental organization

The World Customs Organization (WCO) is an intergovernmental organization headquartered in Brussels, Belgium. The WCO works on customs-related matters including the development of international conventions, instruments, and tools on topics such as commodity classification, valuation, rules of origin, collection of customs revenue, supply chain security, international trade facilitation, customs enforcement activities, combating counterfeiting in support of intellectual property rights (IPR), illegal drug enforcement, combating counterfeiting of medicinal drugs, illegal weapons trading, integrity promotion, and delivering sustainable capacity building to assist with customs reforms and modernization. The WCO maintains the international Harmonized System (HS) goods nomenclature, and administers the technical aspects of the World Trade Organization (WTO) Agreements on Customs Valuation and Rules of Origin.

The Harmonized Commodity Description and Coding System, also known as the Harmonized System (HS) of tariff nomenclature is an internationally standardized system of names and numbers to classify traded products. It came into effect in 1988 and has since been developed and maintained by the World Customs Organization (WCO), an independent intergovernmental organization based in Brussels, Belgium.

<span class="mw-page-title-main">European Union–Turkey Customs Union</span> Customs union between Turkey and European Union

The European Union–Turkey Customs Union is a trade agreement between the European Union (EU) and Turkey. The agreement came into effect on 31 December 1995, following a 6 March 1995 Decision of the European Community–Turkey Association Council to implement a customs union between the two parties. Goods may travel between the two entities without any customs restrictions. The Customs Union does not cover essential economic areas such as agriculture, services or public procurement.

The Eurasian Economic Community was a regional organisation between 2000 and 2014 which aimed for the economic integration of its member states. The organisation originated from the Commonwealth of Independent States (CIS) on 29 March 1996, with the treaty on the establishment of the Eurasian Economic Community signed on 10 October 2000 in Kazakhstan's capital Astana by Presidents Alexander Lukashenko of Belarus, Nursultan Nazarbayev of Kazakhstan, Askar Akayev of Kyrgyzstan, Vladimir Putin of Russia, and Emomali Rahmon of Tajikistan. Uzbekistan joined the community on 7 October 2005, but later withdrew on 16 October 2008.

A common external tariff(CET) must be introduced when a group of countries forms a customs union. The same customs duties, import quotas, preferences or other non-tariff barriers to trade apply to all goods entering the area, regardless of which country within the area they are entering. It is designed to end re-exportation; but it may also inhibit imports from countries outside the customs union and thereby diminish consumer choice and support protectionism of industries based within the customs union. The common external tariff is a mild form of economic union but may lead to further types of economic integration. In addition to having the same customs duties, the countries may have other common trade policies, such as having the same quotas, preferences or other non-tariff trade regulations apply to all goods entering the area, regardless of which country, within the area, they are entering.

A free-trade agreement (FTA) or treaty is an agreement according to international law to form a free-trade area between the cooperating states. There are two types of trade agreements: bilateral and multilateral. Bilateral trade agreements occur when two countries agree to loosen trade restrictions between the two of them, generally to expand business opportunities. Multilateral trade agreements are agreements among three or more countries, and are the most difficult to negotiate and agree.

<span class="mw-page-title-main">Market access</span> Ability to sell goods and services across borders

In international trade, market access is a company's ability to enter a foreign market by selling its goods and services in another country. Market access is not the same as free trade, because market access is normally subject to conditions or requirements, whereas under ideal free trade conditions goods and services can circulate across borders without any barriers to trade. Expanding market access is therefore often a more achievable goal of trade negotiations than achieving free trade.

The Harmonized Tariff Schedule of the United States (HTSUS), also referred to as the Harmonized Tariff Schedule of the United States Annotated (HTSA), is the primary resource for determining tariff classifications for goods imported into the United States. It can also be used in place of Schedule B for classifying goods exported from the United States to foreign countries. The Harmonized Tariff Schedule classifies a good based on its name, use, and/or the material used in its construction and assigns it a ten-digit classification code number, and there are over 17,000 unique classification code numbers. Although the U.S. International Trade Commission publishes and maintains the Schedule in its various forms, U.S. Customs and Border Protection is the only agency that can provide legally binding advice or rulings on classification of imports.

Intrastat is the system for collecting information and producing statistics on the trade in goods between countries of the European Union (EU). It began operation on 1 January 1993, when it replaced customs declarations as the source of trade statistics within the EU. The requirements of Intrastat are similar in all member states of the EU, although there are important exceptions.

The TARIC code is designed to show the various rules applying to specific products when imported into the EU. This includes the provisions of the harmonised system and the combined nomenclature but also additional provisions specified in Community legislation such as tariff suspensions, tariff quotas and tariff preferences, which exist for the majority of the Community’s trading partners. In trade with third countries, the 10-digit Taric code must be used in customs and statistical declarations.

<span class="mw-page-title-main">ATA Carnet</span> International customs document

The ATA Carnet, often referred to as the "Passport for goods", is an international customs document that permits the tax-free and duty-free temporary export and import of nonperishable goods for up to one year. It consists of unified customs declaration forms which are prepared ready to use at every border crossing point. It is a globally accepted guarantee for customs duties and taxes which can replace the security deposit required by each customs authority. It can be used in multiple countries in multiple trips up to its one-year validity. The acronym ATA is a combination of French and English terms "Admission Temporaire/Temporary Admission". The ATA carnet is now the document most widely used by the business community for international operations involving temporary admission of goods.

<span class="mw-page-title-main">Rules of origin</span> Rules to attribute a country of origin to a product

Rules of origin are the rules to attribute a country of origin to a product in order to determine its "economic nationality". The need to establish rules of origin stems from the fact that the implementation of trade policy measures, such as tariffs, quotas, trade remedies, in various cases, depends on the country of origin of the product at hand.

<span class="mw-page-title-main">European Union Customs Union</span> EUs common customs area

The European Union Customs Union (EUCU), formally known as the Community Customs Union, is a customs union which consists of all the member states of the European Union (EU), Monaco, and the British Overseas Territory of Akrotiri and Dhekelia. Some detached territories of EU states do not participate in the customs union, usually as a result of their geographic separation. In addition to the EUCU, the EU is in customs unions with Andorra, San Marino and Turkey, through separate bilateral agreements.

<span class="mw-page-title-main">European Union value added tax</span> EU-wide goods and services tax policy

The European Union value-added tax is a value added tax on goods and services within the European Union (EU). The EU's institutions do not collect the tax, but EU member states are each required to adopt in national legislation a value added tax that complies with the EU VAT code. Different rates of VAT apply in different EU member states, ranging from 17% in Luxembourg to 27% in Hungary. The total VAT collected by member states is used as part of the calculation to determine what each state contributes to the EU's budget.

Comext is a statistical database on trade of goods managed by Eurostat, the Statistical Office of the European Commission. It is an important indicator of the performance of the European Union (EU) economy, because it focuses on the size and the evolution of imports and exports.

The General Rules for the Interpretation of the Harmonized System ("GRI") are the rules that govern the classification of goods under the Harmonized Commodity Description and Coding System (HS).

References

  1. "Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff". Document 31987R2658. EUR-Lex. 23 July 1987.
  2. "Official Harmonized Tariff Schedule" . Retrieved 27 Jun 2016.
  3. "Timeline - EU restrictive measures against Russia over Ukraine". European Council. 4 February 2023.