Crown International

Last updated
Crown International
Industry Audio electronics
Founded1947 (as International Radio and Electronics Corporation)
Founder Clarence C. Moore
Headquarters,
Products power amplifiers
microphones
preamplifiers
compact audio mixers
audio networking products
Owner Samsung Electronics
Parent Harman International Industries
Website www.crownaudio.com

Crown International, or Crown Audio, is an American manufacturer of audio electronics, and is a subsidiary of Harman International Industries, which has been part of South Korea-based Samsung Electronics since 2017. Today, the company is known primarily for its power amplifiers, but has also manufactured microphones, loudspeakers, and a line of commercial audio products, as well as digital audio networking products.

Contents

History

International Radio and Electronics Corporation (IREC) was established in 1947 by Clarence C. Moore, an Elkhart, Indiana minister. The company started out building rugged, open reel tape recorders for use by missionaries in far off parts of the world. [1] A converted chicken coop served as the first manufacturing facility. [1]

In the 1960s, the company's name was changed to "Crown International", as suggested by Moore's wife and co-founder, Ruby, as she felt the name "International Radio and Electronics Corporation" was too long, and because the emblem on many of their tape recorders was a crown. In 1975, the company's name was changed to Crown International, Inc., as voted by the stockholders. [1]

A fire destroyed 60% of the Crown facility on Thanksgiving Day 1971 and rendered much of the remaining building severely damaged. US$1 million of uninsured assets were lost. The plant was rebuilt, and D-60 amplifier production was brought back on line within six weeks. [2]

In March, 2000, Crown International was acquired by Harman International as their primary supplier of audio power amplifiers. [1] The radio frequency broadcast division was subsequently repurchased by descendants of Clarence Moore who restructured the division in order to continue the manufacture of broadcast transmitters and RF amplifiers using Moore's original firm name: "International Radio & Electronics Corporation". [3] Following Crown International's acquisition by Harman International, additional offices were set up in Northridge, Los Angeles, California, where AKG Acoustics, another Harman company, maintains its North American headquarters.

In June, 2018, Harman International shut down [4] the Crown International headquarters in Elkhart, IN and moved manufacturing to Mexico in an effort to consolidate resources.

Product timeline

In 1947, Clarence and Ruby Moore began by modifying existing makes and models of tape recorders to make them more rugged. [2] In 1949, Moore obtained a groundbreaking patent, the first tape recorder with a built-in power amplifier for public address duties, which was introduced in 1950. [1] In 1953, Crown added a line of compact loudspeakers as accessories to the reel to reel tape recorders. [2]

The Crown DC300, introduced in 1967, helped define the era of modern power amplifiers Crown DC300 triple view.jpg
The Crown DC300, introduced in 1967, helped define the era of modern power amplifiers

In 1959, Crown began making standalone tube power amplifiers. By 1963, solid state electronics development allowed Crown to produce a more robust tape recorder, and in 1964, their first solid state power amplifier: the low-profile SA 20-20. [2] In 1967, the DC300 was introduced as the first AB+B circuitry amplifier with 150 watts per channel at eight ohms. The DC300 proved very popular with sound reinforcement system owners and moved Crown into a leadership position in terms of power amplifier sales worldwide. [2] As well, the DC300 was seen as a breakthrough product by commercial sound system contractors seeking to power their constant-voltage speaker systems without the frequency response limitations and power losses associated with output power transformers which had previously been required. [6] In November 2007, after 40 years of service, the Crown DC300 was inducted into the TEC Awards TECnology Hall of Fame in New York on the opening day of the Audio Engineering Society's 123rd convention. George Peterson, executive editor of Mix magazine, said of the DC300 that it "was a classic that really ushered in and defined the era of the modern power amplifier." [5]

In 1971, the grounded bridge amplifier design was invented by Crown, allowing greater output power without increasing amplifier size [7] and also gave lower distortion, less thermal stress and greater reliability. [2] The first grounded bridge product released by Crown was the M600 amplifier (1974) primarily employed for commercial sound installations including constant voltage loudspeaker systems. [8] Crown received a patent for the invention in 1974. [9] After proving itself in the field, the topology was used to design the Microtech MT-1000 in 1984. [7] Further development of the grounded bridge yielded the Macrotech line which set a new standard for touring sound reinforcement in 1992 with the MA-5000VZ. [2]

In 1976, Crown patented the synergistic equalizer, [10] releasing the stereo EQ-2 graphic equalizer which used a combination of shelving filters and eleven active frequency adjustment faders per channel. The faders were connected to constant bandwidth, variable Q, 1/2-octave filters placed on octave centers but with adjustable frequency knobs to shift the center frequency for greater flexibility. [11] A limited number of units were sold to audiophiles and audio researchers.

By 1977, all of Crown's tape recorder products had been phased out. [2]

In 1979, Crown introduced the PSA-2 & SA-2 power amplifiers with analog computer control of transistor performance to maximize output characteristics. [2] The FM-1 stereo radio tuner was praised at the Consumer Electronics Show. [2] In 1981, the FM-2 with digital tuning was released. [2]

To complement its line of audiophile power amplifiers, Crown introduced a companion line of electrostatic loudspeakers in 1973, namely the ES224, the ES212, the ES26 and the ES14. [12] The ES224 featured 24 bidirectional electrostatic radiators and two 10" woofers, with crossover at 350 Hz. The ES212 was similar but with 12 radiators. and crossover at 375 Hz. The ES26 featured 6 radiators with two 10" woofers, and the ES14 had 4 radiators with one 10" woofer, both with crossovers at 1500 Hz. The large subwoofers, in conjunction with the electrostatic panels, provided audio response stated variously as 22-30 Hz up to 30 kHz. [12] [13] The ES224 was originally-priced at $2,330/pair; the ES212 at $1,200/pair; the ES26 at $990/pair; and the ES14 at $670/pair. [14] These four high end electrostatic models, and two mid-range models (the C-4 [15] and the C-8 [16] ) were sometimes referenced as the "Auralinear" line of loudspeakers. [12]

A line of Pressure zone microphones (PZM) was introduced by Crown in 1980, [2] culminating in the PZM-30 series in 1990. [17] Other microphones introduced by Crown included the PCC-160 directional boundary microphone in 1986, the tiny GLM series and the patented Differoid CM310 in 1987. The SASS stereo microphone was patented in 1989. Garth Brooks was the first performer to wear the Crown CM311A headset microphone in 1993. The CM700 studio condenser was introduced in 1995. [2]

Some Crown products were sold for export labeled with the Amcron, rather than the Crown, brand. [18]

Related Research Articles

<span class="mw-page-title-main">Subwoofer</span> Loudspeaker for low-pitched audio frequencies

A subwoofer is a loudspeaker designed to reproduce low-pitched audio frequencies, known as bass and sub-bass, that are lower in frequency than those which can be (optimally) generated by a woofer. The typical frequency range that is covered by a subwoofer is about 20–200 Hz for consumer products, below 100 Hz for professional live sound, and below 80 Hz in THX-certified systems. Thus, one or more subwoofers are important for high-quality sound reproduction as they are responsible for the lowest two to three octaves of the ten octaves that are audible. This very low-frequency (VLF) range reproduces the natural fundamental tones of the bass drum, electric bass, double bass, grand piano, contrabassoon, tuba, in addition to thunder, gunshots, explosions, etc.

<span class="mw-page-title-main">Loudspeaker</span> Converts an electrical audio signal into a corresponding sound

A loudspeaker is an electroacoustic transducer that converts an electrical audio signal into a corresponding sound. A speaker system, also often simply referred to as a speaker or loudspeaker, comprises one or more such speaker drivers, an enclosure, and electrical connections possibly including a crossover network. The speaker driver can be viewed as a linear motor attached to a diaphragm which couples that motor's movement to motion of air, that is, sound. An audio signal, typically from a microphone, recording, or radio broadcast, is amplified electronically to a power level capable of driving that motor in order to reproduce the sound corresponding to the original unamplified electronic signal. This is thus the opposite function to the microphone; indeed the dynamic speaker driver, by far the most common type, is a linear motor in the same basic configuration as the dynamic microphone which uses such a motor in reverse, as a generator.

<span class="mw-page-title-main">Microphone</span> Device that converts sound into an electrical signal

A microphone, colloquially called a mic, or mike, is a transducer that converts sound into an electrical signal. Microphones are used in many applications such as telephones, hearing aids, public address systems for concert halls and public events, motion picture production, live and recorded audio engineering, sound recording, two-way radios, megaphones, and radio and television broadcasting. They are also used in computers and other electronic devices, such as mobile phones, for recording sounds, speech recognition, VoIP, and other purposes, such as ultrasonic sensors or knock sensors.

<span class="mw-page-title-main">Tweeter</span> Type of loudspeaker

A tweeter or treble speaker is a special type of loudspeaker that is designed to produce high audio frequencies, typically deliver high frequencies up to 100 kHz. The name is derived from the high pitched sounds made by some birds (tweets), especially in contrast to the low woofs made by many dogs, after which low-frequency drivers are named (woofers).

A woofer or bass speaker is a technical term for a loudspeaker driver designed to produce low frequency sounds, typically from 20 Hz up to a few hundred Hz. The name is from the onomatopoeic English word for a dog's deep bark, "woof". The most common design for a woofer is the electrodynamic driver, which typically uses a stiff paper cone, driven by a voice coil surrounded by a magnetic field.

<span class="mw-page-title-main">Electrostatic loudspeaker</span> Sound playback device

An electrostatic loudspeaker (ESL) is a loudspeaker design in which sound is generated by the force exerted on a membrane suspended in an electrostatic field.

<span class="mw-page-title-main">Mark Levinson Audio Systems</span> American high-end audio equipment brand

Mark Levinson is an American high-end audio equipment brand established in 1972 by eponymous founder Mark Levinson, and based in Stamford, Connecticut. It is owned by Harman International Industries, a subsidiary of Samsung Electronics.

<span class="mw-page-title-main">JBL</span> American audio hardware manufacturer

JBL is an American audio equipment manufacturer headquartered in Los Angeles, California, United States. JBL serves the customer home and professional market. The professional market includes studios, installed/tour/portable sound, music production, DJ, cinema markets. The home market includes high-end home amplification/speakers/headphones as well as high-end car audio. JBL is owned by Harman International, itself a subsidiary of Samsung Electronics.

Harman Kardon is a division of US-based Harman International Industries, an independent subsidiary of Samsung Electronics. Harman Kardon was originally founded in Westbury, New York, in 1953 by business partners Sidney Harman and Bernard Kardon.

<span class="mw-page-title-main">Revox</span> Audio equipment brand

ReVox is a brand name, registered by Studer on 27 March 1951 for Swiss audio equipment.

Founded by David Hafler and Ed Laurent in Philadelphia, Pennsylvania in 1955, Dynaco was an American hi-fi audio system manufacturer popular in the 1960s and 1970s for its wide range of affordable, yet high quality audio components.. Its best known product was the ST-70 tube stereo amplifier. They also manufactured other tube and solid state amplifiers, preamplifiers, radio tuners and bookshelf loudspeakers. Dynaco was liquidated in 1980, and the trademark is now owned by Radial Engineering Ltd.

<span class="mw-page-title-main">Rudy Bozak</span> American audio engineer

Rudolph Thomas Bozak (1910–1982) was an audio electronics and acoustics designer and engineer in the field of sound reproduction. His parents were Bohemian Czech immigrants; Rudy was born in Uniontown, Pennsylvania. Bozak studied at Milwaukee School of Engineering; in 1981, the school awarded him an honorary doctorate in engineering. Bozak married Lillian Gilleski; the two had three daughters: Lillian, Mary and Barbara.

<span class="mw-page-title-main">Loudspeaker enclosure</span> Acoustical component

A loudspeaker enclosure or loudspeaker cabinet is an enclosure in which speaker drivers and associated electronic hardware, such as crossover circuits and, in some cases, power amplifiers, are mounted. Enclosures may range in design from simple, homemade DIY rectangular particleboard boxes to very complex, expensive computer-designed hi-fi cabinets that incorporate composite materials, internal baffles, horns, bass reflex ports and acoustic insulation. Loudspeaker enclosures range in size from small "bookshelf" speaker cabinets with 4-inch (10 cm) woofers and small tweeters designed for listening to music with a hi-fi system in a private home to huge, heavy subwoofer enclosures with multiple 18-inch (46 cm) or even 21-inch (53 cm) speakers in huge enclosures which are designed for use in stadium concert sound reinforcement systems for rock music concerts.

<span class="mw-page-title-main">Clarence C. Moore</span> American missionary (1904–1979)

Clarence C. Moore was an engineer and minister at Radio Station HCJB with primary transmitters in Quito, Ecuador.

Technics is a Japanese audio brand established by Matsushita Electric in 1965. Since 1965, Matsushita has produced a variety of HiFi and other audio products under the brand name, such as turntables, amplifiers, radio receivers, tape recorders, CD players, loudspeakers, and digital pianos. Technics products were available for sale in various countries. The brand was originally conceived as a line of high-end audio equipment to compete against brands such as Nakamichi.

<span class="mw-page-title-main">Electrodynamic speaker driver</span> Individual transducer that converts an electrical audio signal to sound waves

An electrodynamic speaker driver, often called simply a speaker driver when the type is implicit, is an individual transducer that converts an electrical audio signal to sound waves. While the term is sometimes used interchangeably with the term speaker (loudspeaker), it is usually applied to specialized transducers which reproduce only a portion of the audible frequency range. For high fidelity reproduction of sound, multiple loudspeakers are often mounted in the same enclosure, each reproducing a different part of the audible frequency range. In this case the individual speakers are referred to as drivers and the entire unit is called a loudspeaker. Drivers made for reproducing high audio frequencies are called tweeters, those for middle frequencies are called mid-range drivers, and those for low frequencies are called woofers, while those for very low bass range are subwoofers. Less common types of drivers are supertweeters and rotary woofers.

The Wharfedale MACH series of loudspeakers consists of the MACH 3, 5, 7, and 9. This is an informational page devoted to owners and users of these loudspeakers and those interested in history and construction of electronic sound reproduction.

<span class="mw-page-title-main">Clifford A. Henricksen</span> American inventor, American musician

Cliff Henricksen is a musician, inventor and audio technologist. He is self-taught as a musician with a graduate degree in mechanical engineering at Massachusetts Institute of Technology (MIT). Throughout his career Cliff has found innovative ways to apply engineering basics to electro acoustics and to audio technology as it applies to music and in particular to live music performance. He has invented and engineered a wide variety of technologies and products well known in the world of professional audio. Today he balances work in audio and work as a performing musician.

<span class="mw-page-title-main">Quad Electrostatic Loudspeaker</span> First production electrostatic loudspeaker

The Quad Electrostatic Loudspeaker (ESL) is the world's first production full-range electrostatic loudspeaker, launched in 1957 by Quad Electroacoustics, then known as the Acoustical Manufacturing Co. Ltd. The speaker is shaped somewhat like a home electric radiator curved slightly on the vertical axis. They are widely admired for their clarity and precision, but known to be difficult speakers to run and maintain.

Thomas J. Danley is an American audio engineer, electrical engineer and inventor, the holder of multiple patents for audio transducers, especially high-linearity, high-output professional horn loudspeaker systems. Danley first gained notice in the 1980s with his novel servomotor-driven subwoofer systems used to reproduce very low frequencies in concert tours and theme parks. In 2000 he advanced the implementation of multiple-entry horns in 2000 with several designs led by the SPL-td1, a seven-driver loudspeaker. In 2005, he started a new company, Danley Sound Labs, through which he patented further technologies and produced a wide variety of loudspeaker models based on these technologies.

References

  1. 1 2 3 4 5 Crown Audio. History Archived August 20, 2011, at the Wayback Machine
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 Crown Audio timeline Archived 2008-09-15 at the Wayback Machine
  3. Audio Annals. Crown International Archived 2008-11-19 at the Wayback Machine
  4. Weingart, Jennifer (15 September 2017). "Crown Audio in Elkhart closing". www.wvpe.org. Retrieved 2019-05-07.
  5. 1 2 Crown Audio. Press release. Crown DC 300 Enters TECnology Hall Of Fame
  6. Crown Audio. Guide to Constant-Voltage Systems Archived 2009-01-08 at the Wayback Machine
  7. 1 2 Crown Audio. Grounded Bridge Archived 2008-12-19 at the Wayback Machine
  8. Crown Audio. Legacy products. M600 Instruction Manual Archived 2010-01-03 at the Wayback Machine
  9. U.S. patent 3,808,545
  10. U.S. patent 3,750,044
  11. Crown Audio. Legacy products. EQ-2 Archived 2010-01-03 at the Wayback Machine
  12. 1 2 3 Advertisement, Stereo Review magazine, January, 1973, p. 50
  13. "Crown, Auralinear Speakers brochure" (PDF). Archived from the original (PDF) on 2012-05-10. Retrieved 2022-02-17.
  14. Berkman, AudioKarma, Aug. 15, 2009
  15. "Crown, Auralinear Speakers, Model C-4 brochure" (PDF). Archived from the original (PDF) on 2012-05-10. Retrieved 2022-02-17.
  16. "Crown, Auralinear Speakers, Model C-8 brochure" (PDF). Archived from the original (PDF) on 2012-05-10. Retrieved 2022-02-17.
  17. Crown Audio. PZM-30R, PZM-30F: Pressure Zone Microphone Archived 2007-10-30 at the Wayback Machine
  18. Rockwell, Crown D-75