Cutting (automobile)

Last updated
Bob Burman's Cutting after he crashed in the 1912 Indy 500 Bob Burman Cutting racecar after accident in 1912 Indy 500.jpg
Bob Burman's Cutting after he crashed in the 1912 Indy 500

The Cutting was an American automobile manufactured in Jackson, Michigan by the Clark-Carter Automobile Company from 1909 to 1912, [1] and the Cutting Motor Car Company in 1913. It was made in the same factory as previously produced the C.V.I. make. The Cutting was engineered by Charles Cutting, using engines from Milwaukee, Model, and Wisconsin ranging from 30 to 60 hp. Prices ranged from US$1,200 to $1,500. In 1912 the company claimed to have the highest power-to-price ratio of any car at or above the $1,200 price.[ citation needed ]

Cuttings were entered into the Indianapolis 500 in 1911 and 1912, placing top 15 in the former year but crashing mid-race in the latter.

The company failed c. 1913 due to lack of sufficient initial capital; liabilities exceeded $350,000. It was sold in October 1913 for $30,000 (and assumption of two mortgages) to L. C. Erbes.

Related Research Articles

<span class="mw-page-title-main">Winton Motor Carriage Company</span> United States automobile manufacturer

The Winton Motor Carriage Company was a pioneer United States automobile manufacturer based in Cleveland, Ohio. Winton was one of the first American companies to sell a motor car. In 1912, Winton became one of the first American manufacturers of diesel engines.

<span class="mw-page-title-main">Cyclecar</span> Early microcar

A cyclecar was a type of small, lightweight and inexpensive motorized car manufactured in Europe and the United States between 1910 and the early 1920s. The purpose of cyclecars was to fill a gap in the market between the motorcycle and the car. A key characteristic was that it could accommodate only two passengers sitting in tandem.

<span class="mw-page-title-main">Baker Motor Vehicle</span> Defunct American motor vehicle manufacturer

Baker Motor Vehicle Company was an American manufacturer of Brass Era electric automobiles in Cleveland, Ohio, from 1899 to 1914. It was founded by Walter C. Baker.

<span class="mw-page-title-main">Stevens-Duryea</span> Defunct American motor vehicle manufacturer

Stevens-Duryea was an American manufacturer of Veteran and Brass Era automobiles in Chicopee Falls, Massachusetts, between 1901 and 1915 and Vintage Cars from 1919 to 1927.

<span class="mw-page-title-main">Lozier</span> Dufunct American Automobile company

The Lozier Motor Company was a brass era producer of luxury automobiles in the United States. The company produced automobiles from 1900 to 1918, in Plattsburgh, New York and from 1910, at Detroit, Michigan.

<span class="mw-page-title-main">Columbia (automobile brand)</span> American automobile manufacturer

Columbia was an American brand of automobiles produced by a group of companies in the United States. They included the Pope Manufacturing Company of Hartford, Connecticut, the Electric Vehicle Company, and an entity of brief existence in 1899, the Columbia Automobile Company.

<span class="mw-page-title-main">Penn (automobile)</span> Defunct American motor vehicle manufacturer

Penn was the name of three American automobiles of the veteran era, but Penn Motor Car Company, located at 7510 Thomas Boulevard in Pittsburgh was the only one to enter production. The Penn brass era automobile was produced from 1911 to 1912.

<span class="mw-page-title-main">Staver</span> Defunct American motor vehicle manufacturer

The Staver and Staver-Chicago was an American Brass Era automobile manufactured at 76th and Wallace Streets in Chicago, Illinois, by the Staver Carriage Company from 1906 until 1914.

Spaulding was used as an automobile marque by two separate companies. The Spaulding Automobile and Motor Company of Buffalo, New York built Veteran Era automobiles in 1902 and 1903. Spaulding Manufacturing Company of Grinnell, Iowa built Brass Era automobiles from 1910 to 1916.

<span class="mw-page-title-main">Speedwell Motor Car Company</span> Defunct American motor vehicle manufacturer

The Speedwell Motor Car Company was a Brass Era American automobile manufacturing company established by Pierce Davies Schenck that produced cars from 1907 to 1914. The Great Dayton Flood of 1913 greatly damaged the Speedwell factory and inventory, and the company entered receivership in 1915 after having built an estimated 4,000 cars and trucks.

<span class="mw-page-title-main">Michigan (1908 automobile)</span> Defunct American motor vehicle manufacturer

The Michigan was a brass era automobile manufactured in Kalamazoo, Michigan from 1904 to 1913 by the Michigan Buggy Company and its subsidiary the Michigan Motor Car Company.

The Miller was a brass era automobile built in Detroit, Michigan by the Miller Car Company from 1912 to 1913.

<span class="mw-page-title-main">Nyberg Automobile</span> Defunct American motor vehicle manufacturer

Nyberg was the name of a brass era American automobile built by Henry Nyberg of Chicago, Illinois, in Anderson, Indiana, and Chattanooga, Tennessee from 1911 to 1914.

<span class="mw-page-title-main">Schacht (automobile)</span> Defunct US automobile manufacturer

Schacht was an American marque of automobiles and High-wheelers from 1904 to 1913, in Cincinnati, Ohio. The Schacht Manufacturing Company, later renamed Schacht Motor Car Company produced over 9,000 automobiles. The company was reorganized as the G.A. Schacht Motor Truck Company in 1914 and production of trucks and fire trucks continued until 1938.

<span class="mw-page-title-main">Matheson (automobile)</span> Defunct American motor vehicle manufacturer

The Matheson was a luxury American automobile manufactured from 1903 to 1912, first in Grand Rapids, Michigan, then Holyoke, Massachusetts and from 1906 in a purpose-built factory in Forty Fort, Wilkes-Barre, Pennsylvania.

<span class="mw-page-title-main">Metz Company</span> Early automobile manufacturer

The Metz Company was a pioneer brass era automobile maker established by Charles Herman Metz in Waltham, Massachusetts, from 1909 to 1922.

<span class="mw-page-title-main">Flanders Automobile Company</span> American automobile manufacturer

The Flanders Automobile Company was a short-lived US-American automobile manufacturer which operated in Detroit, Michigan, from 1910 to 1913. Its only product was sold through Studebaker dealerships.

<span class="mw-page-title-main">Reliable-Dayton</span> Defunct American motor vehicle manufacturer

The Reliable-Dayton was a High wheeler American automobile manufactured in Chicago, Illinois, from 1906 to 1909. The car was built in a factory that would later be the home of the Fal-Car.

<span class="mw-page-title-main">Middleby Auto Company</span> Defunct American motor vehicle manufacturer

The Middleby Auto Company (1908–1913) was a brass era American automobile manufacturer, based in Reading, Pennsylvania.

References

  1. Kimes, Beverly R. (editor), and Clark, Henry A. The Standard Catalog of American Cars 1805–1945. Krause Publications, 1985. ISBN   0-87341-045-9.[ page needed ]