Cyclododecatriene

Last updated
trans,trans,cis-1,5,9-Cyclododecatriene
Cyclododecatriene.svg
Names
Preferred IUPAC name
(1Z,5E,9E)-Cyclododeca-1,5,9-triene
Identifiers
3D model (JSmol)
AbbreviationsCDT; 1,5,9-CDT
ChemSpider
ECHA InfoCard 100.023.212 OOjs UI icon edit-ltr-progressive.svg
PubChem CID
UNII
  • InChI=1S/C12H18/c1-2-4-6-8-10-12-11-9-7-5-3-1/h1-2,7-10H,3-6,11-12H2/b2-1-,9-7+,10-8+
    Key: ZOLLIQAKMYWTBR-RYMQXAEESA-N
  • (trans,trans,cis-1,5,9):InChI=1/C12H18/c1-2-4-6-8-10-12-11-9-7-5-3-1/h1-2,7-10H,3-6,11-12H2/b2-1-,9-7+,10-8+
    Key: ZOLLIQAKMYWTBR-RYMQXAEEBC
  • C1C\C=C\CC\C=C/CC\C=C\1
Properties
C12H18
Molar mass 162.276 g·mol−1
AppearanceColorless liquid
Density 0.89 g/mL [1]
Melting point −18 °C (0 °F; 255 K) [1]
Boiling point 231 °C (448 °F; 504 K) [1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Cyclododecatrienes are cyclic trienes with the formula C12H18. Four isomers are known for 1,5,9-cyclododecatriene. The trans,trans,cis-isomer is a precursor in the production of nylon-12.

Contents

The four isomers of 1,5,9-cyclododecatriene. Left to right: all-cis; all-trans; cis,trans,trans; and cis,cis,trans CDTisomers.png
The four isomers of 1,5,9-cyclododecatriene. Left to right: all-cis; all-trans; cis,trans,trans; and cis,cis,trans

Production

The trans,trans,cis-isomer is obtained by cyclotrimerization of butadiene catalyzed by a mixture of titanium tetrachloride and an organoaluminium co-catalyst. Production capacity in 1995 was 8000 tons. [2]

Synthesis of 1,5,9-cyclododecatriene.svg

As aforementioned, titanium catalysts predominantly produce the important cis,trans,trans- isomer. The all-trans isomer is, however, the product from nickel- and chromium-catalyzed trimerization reactions. The yield of cyclododecatriene through these methods is often greater than 80%. The principal side products are the dimers and oligomers of butadiene. [3]

Properties

All of the isomers of 1,5,9-cyclododecatriene are colorless, possess typical terpene-like odors, and have low melting points. The all-trans isomer melts at 34 °C while the other three isomers melt below room temperature. All of the isomers behave like typical olefins. The all-trans and cis,trans,trans isomers in particular tend to form complexes with transition metals. [4] They also undergo transannular reactions and isomerization. [5]

Application

Cyclododecatriene is the raw material for the production of dodecanedioic acid (4) through hydrogenation to cyclododecane (2) followed by air oxidation in the presence of boric acid at elevated temperatures to a mixture of the alcohol (3a) and the ketone (3b). In the final step this mixture oxidized further by nitric acid:

Synthesis of 1,12-dodecanedioic acid.svg

The alcohol (3a) and the ketone (3b) can be purified from the alcohol/ketone mixture under different reaction conditions. Pure cyclododecanol (3a) can be produced from the hydrogenation of the mixture in the presence of a copper-chromium catalyst at 30 MPa and 160 ˚C. Pure cyclododecanone (3b) can be produced through the dehydrogenation of the mixture over copper or copper-chromium catalysts on an active support at a temperature range of 230–245 ˚C and atmospheric pressure. Pure cyclododecanone can then be converted into cyclododecanone oxime, which yields laurolactam after Beckmann rearrangement. Laurolactam is the precursor to several plastics, such as polyamide 12, which is also known as nylon 12. [6]

2012 Evonik fire

In March 2012, a fire at the Marl Chemical Park operated by Evonik Industries [7] in Marl, Germany, [8] stopped production for an expected duration of several months. The plant produced a substantial proportion of the world's production of CDT, particularly that needed to produce laurolactam, a precursor to the polyamide PA12. This in turn led to concerns for global production of finished goods, particularly in the automotive industry. [9] Other biobased polyamides, not dependent on laurolactam or CDT, have been put forward as alternative materials. [8]

Related Research Articles

<span class="mw-page-title-main">Alkene</span> Hydrocarbon compound containing one or more C=C bonds

In organic chemistry, an alkene is a hydrocarbon containing a carbon–carbon double bond. The double bond may be internal or in the terminal position. Terminal alkenes are also known as α-olefins.

<span class="mw-page-title-main">Petrochemical</span> Chemical product derived from petroleum

Petrochemicals are the chemical products obtained from petroleum by refining. Some chemical compounds made from petroleum are also obtained from other fossil fuels, such as coal or natural gas, or renewable sources such as maize, palm fruit or sugar cane.

<span class="mw-page-title-main">Butadiene</span> Chemical compound

1,3-Butadiene is the organic compound with the formula CH2=CH-CH=CH2. It is a colorless gas that is easily condensed to a liquid. It is important industrially as a precursor to synthetic rubber. The molecule can be viewed as the union of two vinyl groups. It is the simplest conjugated diene.

A diol is a chemical compound containing two hydroxyl groups. An aliphatic diol is also called a glycol. This pairing of functional groups is pervasive, and many subcategories have been identified.

In chemistry, a trimer is a molecule or polyatomic anion formed by combination or association of three molecules or ions of the same substance. In technical jargon, a trimer is a kind of oligomer derived from three identical precursors often in competition with polymerization.

<span class="mw-page-title-main">Cyclohexanone</span> Chemical compound

Cyclohexanone is the organic compound with the formula (CH2)5CO. The molecule consists of six-carbon cyclic molecule with a ketone functional group. This colorless oily liquid has a sweet odor reminiscent of benzaldehyde. Over time, samples of cyclohexanone assume a pale yellow color. Cyclohexanone is slightly soluble in water and miscible with common organic solvents. Billions of kilograms are produced annually, mainly as a precursor to nylon.

In organic chemistry, the Knoevenagel condensation reaction is a type of chemical reaction named after German chemist Emil Knoevenagel. It is a modification of the aldol condensation.

<span class="mw-page-title-main">Polybutadiene</span> Type of synthetic rubber formed from the polymerization of butadiene

Polybutadiene [butadiene rubber BR] is a synthetic rubber. Polybutadiene rubber is a polymer formed from the polymerization of the monomer 1,3-butadiene. Polybutadiene has a high resistance to wear and is used especially in the manufacture of tires, which consumes about 70% of the production. Another 25% is used as an additive to improve the toughness of plastics such as polystyrene and acrylonitrile butadiene styrene (ABS). Polybutadiene rubber accounted for about a quarter of total global consumption of synthetic rubbers in 2012. It is also used to manufacture golf balls, various elastic objects and to coat or encapsulate electronic assemblies, offering high electrical resistivity. Polybutadiene is typically crosslinked with sulphur, however, it has also been shown that it can be UV cured when bis-benzophenone additives are incorporated into the formulation.

Cycloocta-1,5-diene is a cyclic hydrocarbon with the chemical formula C8H12, specifically [−(CH2)2−CH=CH−]2.

<span class="mw-page-title-main">Evonik Industries</span> Stock-listed German speciality chemicals company

Evonik Industries AG is a publicly-listed German specialty chemicals company headquartered in Essen, North Rhine-Westphalia, Germany. It is the second-largest chemicals company in Germany, and one of the largest specialty chemicals companies in the world. It is predominantly owned by the RAG Foundation and was founded on 12 September 2007 as a result of restructuring of the mining and technology group RAG AG.

Heptanal or heptanaldehyde is an alkyl aldehyde. It is a colourless liquid with a strong fruity odor, which is used as precursor to components in perfumes and lubricants.

<span class="mw-page-title-main">4-Vinylcyclohexene</span> Chemical compound

4-Vinylcyclohexene is an organic compound consisting of a vinyl group attached to the 4-position of the cyclohexene ring. It is a colorless liquid. Although chiral, it is used mainly as the racemate. It is a precursor to vinylcyclohexene dioxide.

<span class="mw-page-title-main">Cyclododecane</span> Chemical compound

Cyclododecane is an organic compound with the chemical formula (CH2)12. It is a waxy white solid at room temperature, and is soluble in nonpolar organic solvents.

<span class="mw-page-title-main">Dichlorotris(triphenylphosphine)ruthenium(II)</span> Chemical compound

Dichlorotris(triphenylphosphine)ruthenium(II) is a coordination complex of ruthenium. It is a chocolate brown solid that is soluble in organic solvents such as benzene. The compound is used as a precursor to other complexes including those used in homogeneous catalysis.

<span class="mw-page-title-main">Cholesterol total synthesis</span>

Cholesterol total synthesis in chemistry describes the total synthesis of the complex biomolecule cholesterol and is considered a great scientific achievement. The research group of Robert Robinson with John Cornforth published their synthesis in 1951 and that of Robert Burns Woodward with Franz Sondheimer in 1952. Both groups competed for the first publication since 1950 with Robinson having started in 1932 and Woodward in 1949. According to historian Greg Mulheirn the Robinson effort was hampered by his micromanagement style of leadership and the Woodward effort was greatly facilitated by his good relationships with chemical industry. Around 1949 steroids like cortisone were produced from natural resources but expensive. Chemical companies Merck & Co. and Monsanto saw commercial opportunities for steroid synthesis and not only funded Woodward but also provided him with large quantities of certain chemical intermediates from pilot plants. Hard work also helped the Woodward effort: one of the intermediate compounds was named Christmasterone as it was synthesized on Christmas Day 1950 by Sondheimer.

<span class="mw-page-title-main">Cyclohexanedimethanol</span> Chemical compound

Cyclohexanedimethanol (CHDM) is a mixture of isomeric organic compounds with formula C6H10(CH2OH)2. It is a colorless low-melting solid used in the production of polyester resins. Commercial samples consist of a mixture of cis and trans isomers. It is a di-substituted derivative of cyclohexane and is classified as a diol, meaning that it has two OH functional groups. Commercial CHDM typically has a cis/trans ratio of 30:70.

<span class="mw-page-title-main">Laurolactam</span> Chemical compound

Laurolactam is an organic compound from the group of macrocyclic lactams. Laurolactam is mainly used as a monomer in engineering plastics, such as nylon-12 and copolyamides.

4,4'-Diaminodicyclohexylmethane is the name for organic compounds with the formula CH2(C6H10NH2)2. It is classified as a diamine. In the epoxy industry it is often referred to as PACM, short for para-diamino­dicyclohexyl­methane. It is used as a curing agent for epoxy resins It finds particular use in epoxy flooring. Another use is to produce diisocyanates, which are precursors to polyurethanes. The mixture is a colorless solid, but typical samples are yellowish and oily. The compound is produced as a mixture of three isomers by the hydrogenation of methylenedianiline. These isomers are, in decreasing order of their yield from the hydrogenation, trans-trans, cis-trans, and a small amount of cis-cis.

<span class="mw-page-title-main">Marl Chemical Park</span> Industrial park in Marl, North Rhine-Westphalia, Germany

Marl Chemical Park is an industrial park in Marl, North Rhine-Westphalia, Germany. It is the third largest industrial cluster in Germany and among the largest chemical production facilities in Europe. The site occupies over 6 square kilometers, hosts 100 chemical plants, employs 10,000 people, and produces 4 million metric tons of chemicals annually. 18 companies are based in the Park, including primary tenant Evonik Industries AG, which also owns and operates the infrastructure through its subsidiary Infracor GmbH.

<i>trans</i>,<i>trans</i>,<i>trans</i>-(1,5,9-Cyclododecatriene)nickel(0) Chemical compound

trans,trans,trans-(1,5,9-Cyclododecatriene)nickel(0) a organonickel compound with the formula NiC12H18, better known as t-Ni(cdt). It is a 16-electron coordination complex featuring trigonal planar nickel(0) bound to the three alkene groups in the cyclododecatriene ligand. X-ray structural analysis demonstrates that the three olefins adopt a propeller-like arrangement around the nickel atom center, making the structure chiral. This extremely air-sensitive deep red solid was the first discovered Ni(0)-olefin complex.

References

  1. 1 2 3 "trans,trans,cis-1,5,9-Cyclododecatriene". Sigma-Aldrich.
  2. Klaus Weissermel, Hans-Jurgen Arpe (1997). Industrial Organic Chemistry (3rd ed.). John Wiley & Sons. ISBN   3-527-28838-4.
  3. Oenbrink, G.; Schiffer, T. (2013). Ullmann's Encyclopedia of Industrial Chemistry: Cyclododecatriene, Cyclooctadiene, and 4-Vinylcyclohexene. John Wiley & Sons. p. Vol. 2.
  4. Wilke, G. (1988). "COntributions to Organo-NIckel Chemistry". Angew. Chem. Int. Ed. Engl. 27: 185–206. doi:10.1002/anie.198801851.
  5. "High Performance Building Blocks: 1,5,9-Cyclododecatriene (CDT)" (PDF). Evonik Industries. Evonik Industries. Archived from the original (PDF) on 2014-10-06. Retrieved 2014-11-21.
  6. Schiffer, T.; Oenbrink, G. (2009). Ullmann's Encyclopedia of Industrial Chemistry: Cyclododecanol, Cyclododecanone, and Laurolactam. Wiley-VCH.
  7. commercial supplier Degussa
  8. 1 2 "Fire at the CDT plant on the grounds of the Marl Chemicals Park". Press Release. Evonik Industries. 4 April 2012.
  9. Stephen Evans (19 April 2012). "Fire in small German town could curb world car production". BBC News Online .