D-Shape

Last updated

D-Shape is a large 3-dimensional printer that uses binder-jetting, a layer by layer printing process, to bind sand with an inorganic seawater [1] and magnesium-based binder [2] in order to create stone-like objects. Invented by Enrico Dini, founder of Monolite UK Ltd, the first model of the D-Shape printer used epoxy resin, commonly used as an adhesive in the construction of skis, cars, and airplanes, as a binder. Dini patented this model in 2006. [3] After experiencing problems with the epoxy, Dini changed the binder to the current magnesium-based one and patented the printer again in September 2008. [4] In the future, Dini aims to use the printer to create full-scale buildings.

Contents

Technical description

The current version of the D-Shape 3-D printer sits in a 6m by 6m aluminum frame. The frame consists of a square base that moves upwards along four vertical beams during the printing process via stepper motors, which are used to repeatedly move a specified length and then hold in place, on each beam. Spanning the entire horizontal 6m of the base is a printer head with 300 nozzles, each spaced 20mm apart. The printer head is connected to the base by an aluminum beam that runs perpendicular to the printer head. [5]

Process

Before the actual printing process can begin, a 3-D model of the object to be printed must be created on CAD, a software that allows a designer to create 3-D models on a computer. Once the model is finished, the CAD file is sent to the printer head. The printing process begins when a layer of sand from 5 to 10 mm thick, mixed with solid magnesium oxide (MgO), [6] is evenly distributed by the printer head in the area enclosed by the frame. The printer head breaks the 3-D model into 2-D slices. Then, starting with the bottom slice, the head moves across the base and deposits an inorganic binding liquid made up of a solution that includes magnesium chloride, at a resolution of 25 DPI (1.0 mm). [7] The binder and sand chemically react to form a sandstone material. It takes about 24 hours for the material to completely solidify. The material is resembling by composition the Sorel cement.

Because the nozzles are 20mm apart there are gaps that may need to be filled up. To fill in these gaps and ensure the sand is uniformly exposed to the binder, an electric piston on the beam that holds the printer head forces the printer head to shift in the direction perpendicular to the printer's direction of motion. It takes D-Shape four forward and backward strokes to finish printing a layer. After a layer is finished, the stepper motors on the vertical beams move the base upwards. From the hollow framework just above the printer head, new sand, which is cyclically refilled, is distributed into the area of the frame to create the next layer. [8] During printing, excess sand acts as a support for the solidifying sand and can also be reused in later printings. The printing process is continuous and stops only when the desired structure is completely printed.

After the printer finishes its work, the final structure must be extruded from the sand. Workers use shovels to take out the excess sand and reveal the final product. The magnesium oxide mixed in with the sand causes the sand to become an active participant rather than inert during the reaction with the binder. If the sand was inert, the resulting material would be more like concrete in that the sand would be only slightly bound together, but because of the MgO, the final product is a mineral-like material with a microcrystalline structure. Compared to concrete, which has low resistance to tension and as a result needs iron reinforcement, D-Shape's structures have relatively high tension resistance and require no iron reinforcement. [9] The entire building process is reported to take a quarter of the time and a third to a half of the cost [10] it would take to build the same structure with traditional means using portland cement, the material currently used in building construction. [11]

Awards and achievements

NYC Waterfront Construction Competition

In the fall of 2012, D-Shape entered into the NYC Waterfront Construction Competition hosted by the New York City Economic Development Corporation (NYCEDC) in which competitors had to create an innovative solution to help strengthen New York City's deteriorating piers and coastline structures. D-Shape's idea, called, "Digital Concrete," was to take 3-D scans of each piece of pier or infrastructure, and then print a support jacket for each specific piece. D-Shape was the First Place Winner and received $50,000 for the idea, which is estimated to save New York City $2.9 billion. [12] [13]

Radiolaria

D-Shape successfully created the tallest printed sculpture, Radiolaria, in 2009. [14] Radiolaria, a sculpture created by Italian architect Andrea Morgante and inspired by radiolarians, unicellular organisms with intricate mineral skeletons, shows off D-Shape's ability to print large freeform structures. The current version of the sculpture is only a 3 x 3 x 3m scale model of the full-size Radiolaria that is planned to be put in a roundabout in Pontedera, Italy. [15]

Future of D-Shape

Currently, Jake Wake-Walker and Marc Webb are working on a documentary, titled The Man Who Prints Houses, about Enrico Dini and his invention. [16] Although D-Shape has garnered attention for its printing abilities, it is still a work in progress. While it has gotten close to printing an actual house by printing a trullo, which is a small, stone hut, [17] the printer still needs to be modified in order to make Dini's dreams of printing larger and more complex buildings a reality.

Lunar bases

Brick made of agglomerated dust similar to lunar regolith, made for ESA by the Italian company D-Shape. Such bricks could cover a European permanent Moon base to protect it from radiations and meteorites. On display at Cite de l'Espace, Toulouse, France. D-Shape moon rock brick at Cite de l'Espace-IMG 1908.jpg
Brick made of agglomerated dust similar to lunar regolith, made for ESA by the Italian company D-Shape. Such bricks could cover a European permanent Moon base to protect it from radiations and meteorites. On display at Cité de l'Espace, Toulouse, France.

Because of D-Shape's capabilities, the European Space Agency (ESA) has taken interest in using the printer to build Moon bases. [18] The ESA is interested in using D-Shape to build Moon bases out of lunar regolith, otherwise known as Moon dust, because the 3-D printer can build the base onsite without human intervention. This is advantageous because only the machine would have to be taken to the Moon, thus reducing the cost of bringing building materials to the lunar surface to create the bases. D-Shape has been successful in printing components for the lunar bases with a simulated Moon dust, and has also been subject to tests that aim to see how the printer will work in the environment on the Moon. [19]

Related Research Articles

<span class="mw-page-title-main">Generation ship</span> Proposed ark method of interstellar travel in which humans regularly develop and reproduce

A generation ship, or generation starship, is a hypothetical type of interstellar ark starship that travels at sub-light speed. Since such a ship might require hundreds to thousands of years to reach nearby stars, the original occupants of a generation ship would grow old and die, leaving their descendants to continue traveling.

<span class="mw-page-title-main">SMART-1</span> European Space Agency satellite that orbited the Moon

SMART-1 was a Swedish-designed European Space Agency satellite that orbited the Moon. It was launched on 27 September 2003 at 23:14 UTC from the Guiana Space Centre in Kourou, French Guiana. "SMART-1" stands for Small Missions for Advanced Research in Technology-1. On 3 September 2006, SMART-1 was deliberately crashed into the Moon's surface, ending its mission.

<span class="mw-page-title-main">Chang'e 1</span> Chinese lunar probe launched in 2007

Chang'e 1 was an uncrewed Chinese lunar-orbiting spacecraft, part of the first phase of the Chinese Lunar Exploration Program. The spacecraft was named after the Chinese Moon goddess, Chang'e.

Contour crafting is a building printing technology being researched by Behrokh Khoshnevis of the University of Southern California's Information Sciences Institute that uses a computer-controlled crane or gantry to build edifices rapidly and efficiently with substantially less manual labor. It was originally conceived as a method to construct molds for industrial parts. Khoshnevis decided to adapt the technology for rapid home construction as a way to rebuild after natural disasters, like the devastating earthquakes that have plagued his native Iran.

<span class="mw-page-title-main">Sand casting</span> Metal casting process using sand as the mold material

Sand casting, also known as sand molded casting, is a metal casting process characterized by using sand — known as casting sand — as the mold material. The term "sand casting" can also refer to an object produced via the sand casting process. Sand castings are produced in specialized factories called foundries. In 2003, over 60% of all metal castings were produced via sand casting.

<span class="mw-page-title-main">3D printing</span> Additive process used to make a three-dimensional object

3D printing or additive manufacturing is the construction of a three-dimensional object from a CAD model or a digital 3D model. It can be done in a variety of processes in which material is deposited, joined or solidified under computer control, with the material being added together, typically layer by layer.

<span class="mw-page-title-main">Space manufacturing</span> Production of manufactured goods in an environment outside a planetary atmosphere

Space manufacturing is the production of tangible goods beyond Earth. Since most production capabilities are limited to low Earth orbit, the term in-orbit manufacturing is also frequently used.

<span class="mw-page-title-main">Korea Aerospace Research Institute</span> South Korean space agency

The Korea Aerospace Research Institute, established in 1989, is the aeronautics and space agency of South Korea. Its main laboratories are located in Daejeon, in the Daedeok Science Town. KARI's vision is to continue building upon indigenous launch capabilities, strengthen national safety and public service, industrialize satellite information and applications technology, explore the Moon, and develop environmentally-friendly and highly-efficient cutting-edge aircraft and core aerospace technology. Current projects include the KSLV-2 launcher. Past projects include the 1999 Arirang-1 satellite. The agency was founded in 1989. Prior to South Korea's entry into the Institute for Advanced Engineering (IAE) in 1992, it focused primarily on aerospace technology.

<span class="mw-page-title-main">Organ printing</span> Method of creating artificial organs

Organ printing utilizes techniques similar to conventional 3D printing where a computer model is fed into a printer that lays down successive layers of plastics or wax until a 3D object is produced. In the case of organ printing, the material being used by the printer is a biocompatible plastic. The biocompatible plastic forms a scaffold that acts as the skeleton for the organ that is being printed. As the plastic is being laid down, it is also seeded with human cells from the patient's organ that is being printed for. After printing, the organ is transferred to an incubation chamber to give the cells time to grow. After a sufficient amount of time, the organ is implanted into the patient.

<span class="mw-page-title-main">Z Corporation</span>

Z Corporation was founded in December 1994 by Marina Hatsopoulos, Walter Bornhorst, James Bredt and Tim Anderson, based on a technology developed at MIT under the direction of Professor Ely Sachs. The Company was sold to Contex Holding in August 2005, and was ultimately acquired by 3D Systems on January 3, 2012.

<span class="mw-page-title-main">Powder bed and inkjet head 3D printing</span> 3D printing technique

Binder jet 3D printing, known variously as "Powder bed and inkjet" and "drop-on-powder" printing, is a rapid prototyping and additive manufacturing technology for making objects described by digital data such as a CAD file. Binder jetting is one of the seven categories of additive manufacturing processes according to ASTM and ISO.

Construction 3D Printing (c3Dp) or 3D construction Printing (3DCP) refers to various technologies that use 3D printing as a core method to fabricate buildings or construction components. Alternative terms for this process include "additive construction." "3D Concrete" refers to concrete extrusion technologies whereas Autonomous Robotic Construction System (ARCS), large-scale additive manufacturing (LSAM), or freeform construction (FC) refer to other sub-groups.

<span class="mw-page-title-main">Fused filament fabrication</span> 3D printing process

Fused filament fabrication (FFF), also known as fused deposition modeling, or filament freeform fabrication, is a 3D printing process that uses a continuous filament of a thermoplastic material. Filament is fed from a large spool through a moving, heated printer extruder head, and is deposited on the growing work. The print head is moved under computer control to define the printed shape. Usually the head moves in two dimensions to deposit one horizontal plane, or layer, at a time; the work or the print head is then moved vertically by a small amount to begin a new layer. The speed of the extruder head may also be controlled to stop and start deposition and form an interrupted plane without stringing or dribbling between sections. "Fused filament fabrication" was coined by the members of the RepRap project to give an acronym (FFF) that would be legally unconstrained in its use.

voxeljet AG, which is based in Friedberg (Bayern) near Augsburg (Germany), is a manufacturer of industrial 3D printing systems. The company has been listed on the Nasdaq since 2020, and previously listed on the New York Stock Exchange since its IPO in 2013. Besides the development and distribution of printing systems, voxeljet AG also operates service centers for the on-demand manufacture of molds and models for metal casting in Germany and abroad. These products are manufactured with the help of a generative production method based on 3D CAD data.

<span class="mw-page-title-main">Applications of 3D printing</span>

In recent years, 3D printing has developed significantly and can now perform crucial roles in many applications, with the most common applications being manufacturing, medicine, architecture, custom art and design, and can vary from fully functional to purely aesthetic applications.

<span class="mw-page-title-main">3D printing processes</span> List of 3D printing processes

A variety of processes, equipment, and materials are used in the production of a three-dimensional object via additive manufacturing. 3D printing is also known as additive manufacturing, because the numerous available 3D printing process tend to be additive in nature, with a few key differences in the technologies and the materials used in this process.

<span class="mw-page-title-main">Lunar resources</span> Potential natural resources on the Moon

The Moon bears substantial natural resources which could be exploited in the future. Potential lunar resources may encompass processable materials such as volatiles and minerals, along with geologic structures such as lava tubes that, together, might enable lunar habitation. The use of resources on the Moon may provide a means of reducing the cost and risk of lunar exploration and beyond.

Multi-material 3D printing is the additive manufacturing procedure of using multiple materials at the same time to fabricate an object. Similar to single material additive manufacturing it can be realised through methods such as FFF, SLA and Inkjet 3D printing. By expanding the design space to different materials, it establishes the possibilities of creating 3D printed objects of different color or with different material properties like elasticity or solubility. The first multi-material 3D printer Fab@Home became publicly available in 2006. The concept was quickly adopted by the industry followed by many consumer ready multi-material 3D printers.

<span class="mw-page-title-main">3D food printing</span> 3D printing techniques to make food

3D food printing is the process of manufacturing food products using a variety of additive manufacturing techniques. Most commonly, food grade syringes hold the printing material, which is then deposited through a food grade nozzle layer by layer. The most advanced 3D food printers have pre-loaded recipes on board and also allow the user to remotely design their food on their computers, phones or some IoT device. The food can be customized in shape, color, texture, flavor or nutrition, which makes it very useful in various fields such as space exploration and healthcare.

<span class="mw-page-title-main">3D concrete printing</span>

3D concrete printing, or simply concrete printing, refers to digital fabrication processes for cementitious materials based on one of several different 3D printing technologies. 3D printed concrete eliminates the need for formwork, reducing material waste and allowing for greater geometric freedom in complex structures. With recent developments in mix design and 3D printing technology over the last decade, 3D concrete printing has grown exponentially since its emergence in the 1990s. Architectural and structural applications of 3D-printed concrete include the production of building blocks, building modules, street furniture, pedestrian bridges, and low-rise residential structures.

References

  1. ↑ "Discovery Channel Covers DShape 3D Printing". Youtube, DShape3DPrinting. Retrieved 21 October 2013.
  2. ↑ Cesaretti, Giovanni; Enrico Dini; Xavier de Kestelier; Valentina Colla; Laurent Pambaguian (January 2014). "Building components for an outpost on the Lunar soil by means of a novel 3D printing technology". Acta Astronautica. 93: 430–450. Bibcode:2014AcAau..93..430C. doi:10.1016/j.actaastro.2013.07.034.
  3. ↑ Dini, Enrico. "Method and device for building automatically conglomerate structures CA 2602071 A1". US Patents. Retrieved 11 November 2013.
  4. ↑ Dini, Enrico. "Method for automatically producing a conglomerate structure and apparatus therefor US 8337736 B2". US Patents. Retrieved 11 November 2013.
  5. ↑ Cesaretti, Giovanni; Enrico Dini; Xavier de Kestelier; Valentina Colla; Laurent Pambaguian (January 2014). "Building components for an outpost on the Lunar soil by means of a novel 3D printing technology". Acta Astronautica. 93: 430–450. Bibcode:2014AcAau..93..430C. doi:10.1016/j.actaastro.2013.07.034.
  6. ↑ Cesaretti, Giovanni; Enrico Dini; Xavier de Kestelier; Valentina Colla; Laurent Pambaguian (January 2014). "Building components for an outpost on the Lunar soil by means of a novel 3D printing technology". Acta Astronautica. 93: 430–450. Bibcode:2014AcAau..93..430C. doi:10.1016/j.actaastro.2013.07.034.
  7. ↑ Edwards, Lin (19 April 2010). "3D printer could build moon bases". Phys.org. Retrieved 21 October 2013.
  8. ↑ Cesaretti, Giovanni; Enrico Dini; Xavier de Kestelier; Valentina Colla; Laurent Pambaguian (January 2014). "Building components for an outpost on the Lunar soil by means of a novel 3D printing technology". Acta Astronautica. 93: 430–450. Bibcode:2014AcAau..93..430C. doi:10.1016/j.actaastro.2013.07.034.
  9. ↑ Dini, Enrico. "Method for automatically producing a conglomerate structure and apparatus therefor US 8337736 B2". US Patents. Retrieved 11 November 2013.
  10. ↑ Parsons, Sarah (17 March 2010). "3-D Printer Creates Entire Buildings From Solid Rock". Habitat. Retrieved 22 October 2013.
  11. ↑ Belezina, Jan (24 February 2012). "D-Shape 3D printer can print full-sized houses". Gizmag. Retrieved 21 October 2013.
  12. ↑ "D-Shape Promises To Modernize New York's Shoreline Using 3D-Printing Technology". The Huffington Post. 3 June 2013. Retrieved 21 October 2013.
  13. ↑ "D-Shape wins top prize in NYC Waterfront Construction Competition". 3ders.org. 12 April 2013. Archived from the original on 13 October 2013. Retrieved 20 October 2013.
  14. ↑ Quirk, Vanessa (12 July 2012). "How 3D Printing Will Change Our World". Arch Daily. Retrieved 20 October 2013.
  15. ↑ Edwards, Lin (19 April 2010). "3D printer could build moon bases". Phys.org. Retrieved 21 October 2013.
  16. ↑ Blagdon, Jeff (21 February 2012). "British company uses 3D printing to make stone buildings out of sand". The Verge. Retrieved 21 October 2013.
  17. ↑ Quirk, Vanessa (12 July 2012). "How 3D Printing Will Change Our World". Arch Daily. Retrieved 20 October 2013.
  18. ↑ Edwards, Lin (19 April 2010). "3D printer could build moon bases". Phys.org. Retrieved 21 October 2013.
  19. ↑ Cesaretti, Giovanni; Enrico Dini; Xavier de Kestelier; Valentina Colla; Laurent Pambaguian (January 2014). "Building components for an outpost on the Lunar soil by means of a novel 3D printing technology". Acta Astronautica. 93: 430–450. Bibcode:2014AcAau..93..430C. doi:10.1016/j.actaastro.2013.07.034.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.