Dedicated short-range communications

Last updated

Dedicated short-range communications (DSRC) is a technology for direct wireless exchange of vehicle-to-everything (V2X) and other intelligent transportation systems (ITS) data between vehicles, other road users (pedestrians, cyclists, etc.), and roadside infrastructure (traffic signals, electronic message signs, etc.). [1] DSRC, which can be used for both one- and two-way data exchanges, uses channels in the licensed 5.9 GHz band. DSRC is based on IEEE 802.11p.

Contents

History

In October 1999, the United States Federal Communications Commission (FCC) allocated 75 MHz of spectrum in the 5.9 GHz band for DSRC-based ITS uses. [2] [3] By 2003, DSRC was used in Europe and Japan for electronic toll collection. [4] In August 2008, the European Telecommunications Standards Institute (ETSI) allocated 30 MHz of spectrum in the 5.9 GHz band for ITS. [5]

In November 2020, the FCC reallocated the lower 45 MHz of the 75 MHz spectrum to the neighboring 5.8 GHz ISM band for unlicensed non-ITS uses, citing DSRC's lack of adoption. Of the 30 MHz that remained for licensed ITS uses, 10 MHz was kept for DSRC (Channel 180, 5.895–5.905 GHz) and 20 MHz was reserved for a successor to DSRC, LTE-CV2X (Channel 183, 5.905–5.925 GHz). [6] [7] [3]

Applications

Singapore's Electronic Road Pricing scheme plans to use DSRC technology for road use measurement (ERP2) to replace its ERP1 overhead gantry method. [8]

In June 2017, the Utah Department of Transportation and the Utah Transit Authority (UTA) demonstrated the use of DSRC for transit signal priority on SR-68 (Redwood Road) in Salt Lake City, whereby several UTA transit buses equipped with DSRC equipment could request changes to signal timing if they were running behind schedule.

Other applications include:

Standardization

DSRC systems in Europe, Japan and the U.S. are incompatible and have significant differences, including spectrum and channels (5.8 GHz RF, 5.9 GHz RF, infrared), data transmission rates, and protocols.[ citation needed ]

The European standardization organisation European Committee for Standardization (CEN), sometimes in co-operation with the International Organization for Standardization (ISO) developed some DSRC standards:

Each standard addresses different layers in the OSI model communication stack.

See also

Related Research Articles

<span class="mw-page-title-main">Digital enhanced cordless telecommunications</span> ITU Standard for cordless telephone systems

Digital Enhanced Cordless Telecommunications, usually known by the acronym DECT, is a standard used for creating cordless telephone systems and for IoT systems. It originated in Europe, where it is the common standard, replacing earlier cordless phone standards, such as 900 MHz CT1 and CT2.. The IoT usage relies on the new DECT-2020 standard.

The ISM radio bands are portions of the radio spectrum reserved internationally for industrial, scientific, and medical (ISM) purposes, excluding applications in telecommunications. Examples of applications for the use of radio frequency (RF) energy in these bands include radio-frequency process heating, microwave ovens, and medical diathermy machines. The powerful emissions of these devices can create electromagnetic interference and disrupt radio communication using the same frequency, so these devices are limited to certain bands of frequencies. In general, communications equipment operating in ISM bands must tolerate any interference generated by ISM applications, and users have no regulatory protection from ISM device operation in these bands.

<span class="mw-page-title-main">Frequency-hopping spread spectrum</span> Radio signal transmission method

Frequency-hopping spread spectrum (FHSS) is a method of transmitting radio signals by rapidly changing the carrier frequency among many frequencies occupying a large spectral band. The changes are controlled by a code known to both transmitter and receiver. FHSS is used to avoid interference, to prevent eavesdropping, and to enable code-division multiple access (CDMA) communications.

<span class="mw-page-title-main">Ultra high frequency</span> Electromagnetic spectrum 300–3000 MHz

Ultra high frequency (UHF) is the ITU designation for radio frequencies in the range between 300 megahertz (MHz) and 3 gigahertz (GHz), also known as the decimetre band as the wavelengths range from one meter to one tenth of a meter. Radio waves with frequencies above the UHF band fall into the super-high frequency (SHF) or microwave frequency range. Lower frequency signals fall into the VHF or lower bands. UHF radio waves propagate mainly by line of sight; they are blocked by hills and large buildings although the transmission through building walls is strong enough for indoor reception. They are used for television broadcasting, cell phones, satellite communication including GPS, personal radio services including Wi-Fi and Bluetooth, walkie-talkies, cordless phones, satellite phones, and numerous other applications.

Ultra-wideband is a radio technology that can use a very low energy level for short-range, high-bandwidth communications over a large portion of the radio spectrum. UWB has traditional applications in non-cooperative radar imaging. Most recent applications target sensor data collection, precise locating, and tracking. UWB support started to appear in high-end smartphones in 2019.

The radio spectrum is the part of the electromagnetic spectrum with frequencies from 3 Hz to 3,000 GHz (3 THz). Electromagnetic waves in this frequency range, called radio waves, are widely used in modern technology, particularly in telecommunication. To prevent interference between different users, the generation and transmission of radio waves is strictly regulated by national laws, coordinated by an international body, the International Telecommunication Union (ITU).

<span class="mw-page-title-main">Cordless telephone</span> Portable telephone that connects to a landline

A cordless telephone or portable telephone has a portable telephone handset that connects by radio to a base station connected to the public telephone network. The operational range is limited, usually to the same building or within some short distance from the base station.

<span class="mw-page-title-main">Telematics</span> Interdisciplinary field that encompasses telecommunications

Telematics is an interdisciplinary field encompassing telecommunications, vehicular technologies, electrical engineering, and computer science. Telematics can involve any of the following:

The Unlicensed National Information Infrastructure (U-NII) radio band, as defined by the United States Federal Communications Commission, is part of the radio frequency spectrum used by WLAN devices and by many wireless ISPs.

IEEE 802.11p is an approved amendment to the IEEE 802.11 standard to add wireless access in vehicular environments (WAVE), a vehicular communication system. It defines enhancements to 802.11 required to support intelligent transportation systems (ITS) applications. This includes data exchange between high-speed vehicles and between the vehicles and the roadside infrastructure, so called vehicle-to-everything (V2X) communication, in the licensed ITS band of 5.9 GHz (5.85–5.925 GHz). IEEE 1609 is a higher layer standard based on the IEEE 802.11p. It is also the basis of a European standard for vehicular communication known as ETSI ITS-G5.

Vehicular communication systems are computer networks in which vehicles and roadside units are the communicating nodes, providing each other with information, such as safety warnings and traffic information. They can be effective in avoiding accidents and traffic congestion. Both types of nodes are dedicated short-range communications (DSRC) devices. DSRC works in 5.9 GHz band with bandwidth of 75 MHz and approximate range of 300 metres (980 ft). Vehicular communications is usually developed as a part of intelligent transportation systems (ITS).

Vehicular ad hoc networks (VANETs) are created by applying the principles of mobile ad hoc networks (MANETs) – the spontaneous creation of a wireless network of mobile devices – to the domain of vehicles. VANETs were first mentioned and introduced in 2001 under "car-to-car ad-hoc mobile communication and networking" applications, where networks can be formed and information can be relayed among cars. It was shown that vehicle-to-vehicle and vehicle-to-roadside communications architectures will co-exist in VANETs to provide road safety, navigation, and other roadside services. VANETs are a key part of the intelligent transportation systems (ITS) framework. Sometimes, VANETs are referred as Intelligent Transportation Networks. They are understood as having evolved into a broader "Internet of vehicles". which itself is expected to ultimately evolve into an "Internet of autonomous vehicles".

Communications access for land mobiles (CALM) is an initiative by the ISO TC 204/Working Group 16 to define a set of wireless communication protocols and air interfaces for a variety of communication scenarios spanning multiple modes of communications and multiple methods of transmissions in Intelligent Transportation System (ITS). The CALM architecture is based on an IPv6 convergence layer that decouples applications from the communication infrastructure. A standardized set of air interface protocols is provided for the best use of resources available for short, medium and long-range, safety critical communications, using one or more of several media, with multipoint (mesh) transfer.

<span class="mw-page-title-main">Radio</span> Technology of using radio waves to carry information

Radio is the technology of signaling and communicating using radio waves. Radio waves are electromagnetic waves of frequency between 3 hertz (Hz) and 300 gigahertz (GHz). They are generated by an electronic device called a transmitter connected to an antenna which radiates the waves, and received by another antenna connected to a radio receiver. Radio is widely used in modern technology, in radio communication, radar, radio navigation, remote control, remote sensing, and other applications.

A connected car is a car that can communicate bidirectionally with other systems outside of the car. This connectivity can be used to provide services to passengers or to support or enhance self-driving functionality. For safety-critical applications, it is anticipated that cars will also be connected using dedicated short-range communications (DSRC) or cellular radios, operating in the FCC-granted 5.9 GHz band with very low latency.

IEEE 802.11af, also referred to as White-Fi and Super Wi-Fi, is a wireless computer networking standard in the 802.11 family, that allows wireless local area network (WLAN) operation in TV white space spectrum in the VHF and UHF bands between 54 and 790 MHz. The standard was approved in February 2014. Cognitive radio technology is used to transmit on unused portions of TV channel band allocations, with the standard taking measures to limit interference for primary users, such as analog TV, digital TV, and wireless microphones.

The Medical Device Radiocommunications Service (MedRadio) is a specification and communication spectrum created for and set aside by the U.S. Federal Communications Commission (FCC) for the communication needs of diagnostic and therapeutic medical implants and body-worn medical devices. Devices operating on MedRadio include cardiac pacemakers, defibrillators, neuromuscular stimulators, and drug delivery systems. As of February 2016, communications spectrum for these and other similar devices is set aside at various points in the 400 MHz frequency band, as well as the 2360-2400 MHz band, though specifically for medical body area network (MBAN) devices. The specification supersedes and incorporates a previous specification called the Medical Implant Communication Service (MICS).

<span class="mw-page-title-main">Vehicle-to-everything</span> Communication between a vehicle and any entity that may affect the vehicle

Vehicle-to-everything (V2X) is communication between a vehicle and any entity that may affect, or may be affected by, the vehicle. It is a vehicular communication system that incorporates other more specific types of communication as V2I (vehicle-to-infrastructure), V2N (vehicle-to-network), V2V (vehicle-to-vehicle), V2P (vehicle-to-pedestrian), V2D (vehicle-to-device).

Cellular V2X (C-V2X) is a 3GPP standard for V2X applications such as self-driving cars. It is an alternative to 802.11p, the IEEE specified standard for V2V and other forms of V2X communications.

References

  1. Harvey J. Miller and Shih-Lung Shaw (2001). Geographic Information Systems for Transportation. Oxford University Press. ISBN   978-0-19-512394-4.
  2. "Federal Communications Commission. News Release, October 1999". FCC. Retrieved 2009-08-16.
  3. 1 2 "Dedicated Short Range Communications (DSRC) Service". Federal Communications Commission . 2022-09-22.
  4. "DSRC Standards: What's New?". ITS Standards Advisory number 3. US Department of Transportation. April 2003. Archived from the original on February 16, 2013. Retrieved September 9, 2013.
  5. "European Telecommunications Standards Institute. News release, September 2008". ETSI. Archived from the original on 2012-02-18. Retrieved 2009-08-16.
  6. "FCC Modernizes 5.9 GHz Band to Improve Wi-Fi and Automotive Safety" (PDF).
  7. "DOT's concerns and recommendations relating to the Federal Communications Commission's November 8, 2019, draft of proposed rulemaking relating to the use of the 5.850-5.925 GHz spectrum band (Memorandum)" (PDF). Federal Communications Commission . United States Department of Transportation.
  8. De Palma, André; Lindsey, Robin (2011). "Traffic congestion pricing methodologies and technologies". Transportation Research Part C: Emerging Technologies. 19 (6): 1377–1399. doi:10.1016/j.trc.2011.02.010.