Diagonal relationship

Last updated
Pictorial representation of examples of diagonal relationship. DiagonalRelation.png
Pictorial representation of examples of diagonal relationship.

In chemistry a diagonal relationship is said to exist between certain pairs of diagonally adjacent elements in the second and third periods (first 20 elements) of the periodic table. These pairs (lithium (Li) and magnesium (Mg), beryllium (Be) and aluminium (Al), boron (B) and silicon (Si), etc.) exhibit similar properties; for example, boron and silicon are both semiconductors, forming halides that are hydrolysed in water and have acidic oxides.

The organization of elements on the periodic table into horizontal rows and vertical columns makes certain relationships more apparent (periodic law). Moving rightward and descending the periodic table have opposite effects on atomic radii of isolated atoms. Moving rightward across the period decreases the atomic radii of atoms, while moving down the group will increase the atomic radii. [1]

Similarly, on moving rightward a period, the elements become progressively more covalent [ clarification needed ], less basic and more electronegative, whereas on moving down a group the elements become more ionic, more basic and less electronegative. Thus, on both descending a period and crossing a group by one element, the changes "cancel" each other out, and elements with similar properties which have similar chemistry are often found – the atomic radius, electronegativity, properties of compounds (and so forth) of the diagonal members are similar.

It is found that the chemistry of a period 2 element often has similarities to the chemistry of the period 3 element one column to the right of it in the periodic table. Thus, the chemistry of Li has similarities to that of Mg, the chemistry of Be has similarities to that of Al, and the chemistry of B has similarities to that of Si. These are called diagonal relationships. (They are not as noticeable after B and Si.)

The reasons for the existence of diagonal relationships are not fully understood, but charge density is a factor. For example, Li+ is a small cation with a +1 charge and Mg2+ is somewhat larger with a +2 charge, so the ionic potential of each of the two ions is roughly the same. It was revealed by an examination that the charge density of lithium is much closer to that of magnesium than to those of the other alkali metals. [2] Using the Li–Mg pair (under room temperature and pressure):

  1. When combined with oxygen under standard conditions, Li and Mg form only normal oxides whereas Na forms peroxide and metals below Na, in addition, form superoxides.
  2. Li is the only group 1 element which forms a stable nitride, Li3N. [3] Mg, as well as other group 2 elements, also form nitrides. [3]
  3. Lithium carbonate, phosphate and fluoride are sparingly soluble in water. The corresponding group 2 salts are insoluble. (Think lattice and solvation energies).
  4. Both Li and Mg form covalent organometallic compounds. LiMe and MgMe2 (cf. Grignard reagents) are both valuable synthetic reagents. The other group 1 and group 2 analogues are ionic and extremely reactive (and hence difficult to manipulate). [4]
  5. Chlorides of both Li and Mg are deliquescent (absorb moisture from surroundings) and soluble in alcohol and pyridine. Lithium chloride, like magnesium chloride (MgCl2·6H2O) separates out from hydrated crystal LiCl·2H2O.
  6. Lithium carbonate and magnesium carbonate are both unstable and can produce corresponding oxides and carbon dioxide when they are heated.

Further diagonal similarities have also been suggested for carbon-phosphorus and nitrogen-sulfur, along with extending the Li-Mg and Be-Al relationships down into the transition elements (such as scandium). [5]

Related Research Articles

<span class="mw-page-title-main">Alkali metal</span> Group of highly reactive chemical elements

The alkali metals consist of the chemical elements lithium (Li), sodium (Na), potassium (K), rubidium (Rb), caesium (Cs), and francium (Fr). Together with hydrogen they constitute group 1, which lies in the s-block of the periodic table. All alkali metals have their outermost electron in an s-orbital: this shared electron configuration results in their having very similar characteristic properties. Indeed, the alkali metals provide the best example of group trends in properties in the periodic table, with elements exhibiting well-characterised homologous behaviour. This family of elements is also known as the lithium family after its leading element.

Electronegativity, symbolized as χ, is the tendency for an atom of a given chemical element to attract shared electrons when forming a chemical bond. An atom's electronegativity is affected by both its atomic number and the distance at which its valence electrons reside from the charged nucleus. The higher the associated electronegativity, the more an atom or a substituent group attracts electrons. Electronegativity serves as a simple way to quantitatively estimate the bond energy, and the sign and magnitude of a bond's chemical polarity, which characterizes a bond along the continuous scale from covalent to ionic bonding. The loosely defined term electropositivity is the opposite of electronegativity: it characterizes an element's tendency to donate valence electrons.

Carbon compounds are defined as chemical substances containing carbon. More compounds of carbon exist than any other chemical element except for hydrogen. Organic carbon compounds are far more numerous than inorganic carbon compounds. In general bonds of carbon with other elements are covalent bonds. Carbon is tetravalent but carbon free radicals and carbenes occur as short-lived intermediates. Ions of carbon are carbocations and carbanions are also short-lived. An important carbon property is catenation as the ability to form long carbon chains and rings.

<span class="mw-page-title-main">Periodic table</span> Tabular arrangement of the chemical elements ordered by atomic number

The periodic table, also known as the periodic table of the elements, arranges the chemical elements into rows ("periods") and columns ("groups"). It is an icon of chemistry and is widely used in physics and other sciences. It is a depiction of the periodic law, which states that when the elements are arranged in order of their atomic numbers an approximate recurrence of their properties is evident. The table is divided into four roughly rectangular areas called blocks. Elements in the same group tend to show similar chemical characteristics.

<span class="mw-page-title-main">Alkaline earth metal</span> Group of chemical elements

The alkaline earth metals are six chemical elements in group 2 of the periodic table. They are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra). The elements have very similar properties: they are all shiny, silvery-white, somewhat reactive metals at standard temperature and pressure.

<span class="mw-page-title-main">Period (periodic table)</span> Method of visualizing the relationship between elements

A period on the periodic table is a row of chemical elements. All elements in a row have the same number of electron shells. Each next element in a period has one more proton and is less metallic than its predecessor. Arranged this way, elements in the same group (column) have similar chemical and physical properties, reflecting the periodic law. For example, the halogens lie in the second-to-last group and share similar properties, such as high reactivity and the tendency to gain one electron to arrive at a noble-gas electronic configuration. As of 2022, a total of 118 elements have been discovered and confirmed.

A period 2 element is one of the chemical elements in the second row of the periodic table of the chemical elements. The periodic table is laid out in rows to illustrate recurring (periodic) trends in the chemical behavior of the elements as their atomic number increases; a new row is started when chemical behavior begins to repeat, creating columns of elements with similar properties.

Chemistry is the physical science concerned with the composition, structure, and properties of matter, as well as the changes it undergoes during chemical reactions.

In chemistry, a reactivity series (or reactivity series of elements) is an empirical, calculated, and structurally analytical progression of a series of metals, arranged by their "reactivity" from highest to lowest. It is used to summarize information about the reactions of metals with acids and water, single displacement reactions and the extraction of metals from their ores.

Ionic radius, rion, is the radius of a monatomic ion in an ionic crystal structure. Although neither atoms nor ions have sharp boundaries, they are treated as if they were hard spheres with radii such that the sum of ionic radii of the cation and anion gives the distance between the ions in a crystal lattice. Ionic radii are typically given in units of either picometers (pm) or angstroms (Å), with 1 Å = 100 pm. Typical values range from 31 pm (0.3 Å) to over 200 pm (2 Å).

Basic oxides are oxides that show basic properties, in opposition to acidic oxides. A basic oxide can either react with water to form a base, or with an acid to form a salt and water in a neutralization reaction.

The chemical state of a chemical element is due to its electronic, chemical and physical properties as it exists in combination with itself or a group of one or more other elements. A chemical state is often defined as an "oxidation state" when referring to metal cations. When referring to organic materials, a chemical state is usually defined as a chemical group, which is a group of several elements bonded together. Material scientists, solid state physicists, analytical chemists, surface scientists and spectroscopists describe or characterize the chemical, physical and/or electronic nature of the surface or the bulk regions of a material as having or existing as one or more chemical states.

<span class="mw-page-title-main">Molten salt</span> Salt that has melted, often by heating to high temperatures

Molten salt is salt which is solid at standard temperature and pressure but liquified due to elevated temperature. A salt that is liquid even at standard temperature and pressure is usually called a room-temperature ionic liquid, and molten salts are technically a class of ionic liquids.

<span class="mw-page-title-main">Periodic trends</span> Specific recurring patterns that are present in the modern periodic table

In chemistry, periodic trends are specific patterns that are present in the periodic table that illustrate different aspects of certain elements when grouped by period and/or group. They were discovered by the Russian chemist Dmitri Mendeleev in 1863. Major periodic trends include atomic radius, ionization energy, electron affinity, electronegativity, valency and metallic character. These trends exist because of the similar electron configurations of the elements within their respective groups or periods; they reflect the periodic nature of the elements. These trends give a qualitative assessment of the properties of each element.

Nomenclature of Inorganic Chemistry, IUPAC Recommendations 2005 is the 2005 version of Nomenclature of Inorganic Chemistry. It is a collection of rules for naming inorganic compounds, as recommended by the International Union of Pure and Applied Chemistry (IUPAC).

<span class="mw-page-title-main">Yttrium</span> Chemical element, symbol Y and atomic number 39

Yttrium is a chemical element; it has symbol Y and atomic number 39. It is a silvery-metallic transition metal chemically similar to the lanthanides and has often been classified as a "rare-earth element". Yttrium is almost always found in combination with lanthanide elements in rare-earth minerals and is never found in nature as a free element. 89Y is the only stable isotope and the only isotope found in the Earth's crust.

<span class="mw-page-title-main">Polonide</span> Chemical compound

A polonide is a chemical compound of the radioactive element polonium with any element less electronegative than polonium. Polonides are usually prepared by a direct reaction between the elements at temperatures of around 300–400 °C. They are amongst the most chemically stable compounds of polonium, and can be divided into two broad groups:

A block of the periodic table is a set of elements unified by the atomic orbitals their valence electrons or vacancies lie in. The term seems to have been first used by Charles Janet. Each block is named after its characteristic orbital: s-block, p-block, d-block, f-block and g-block.

<span class="mw-page-title-main">Kainosymmetry</span>

Kainosymmetry describes the first atomic orbital of each azimuthal quantum number (ℓ). Such orbitals include 1s, 2p, 3d, 4f, 5g, and so on. The term kainosymmetric was coined by Sergey Shchukarev. Pekka Pyykkö referred to such orbitals as primogenic instead. Such orbitals are much smaller than all other orbitals with the same ℓ and have no radial nodes, giving the elements that fill them special properties. They are usually less metallic than their heavier homologues, prefer lower oxidation states, and have smaller atomic and ionic radii.

References

  1. Ebbing, Darrell and Gammon, Steven D. (2009). "Atomic Radius". General Chemistry (PDF) (9th ed.). Houghton Mifflin. pp. 312–314. ISBN   978-0-618-93469-0. Archived from the original (PDF) on 2019-02-10. Retrieved 2019-02-10.{{cite book}}: CS1 maint: multiple names: authors list (link)
  2. Rayner-Canham, Geoffrey (22 December 2013). Descriptive inorganic chemistry. Overton, Tina (Sixth ed.). New York, NY. ISBN   978-1-4641-2557-7. OCLC   882867766.{{cite book}}: CS1 maint: location missing publisher (link)
  3. 1 2 Clark, Jim (2005). "Reactions of the Group 2 Elements with Air or Oxygen". chemguide. Retrieved January 30, 2012.
  4. Shriver, Duward (2006). Inorganic Chemistry (4th ed.). Oxford University Press. ISBN   978-0199264636. Li/Mg p. 259; Be/Al p. 274; B/Si p. 288.
  5. Rayner-Canham, Geoff (2011-07-01). "Isodiagonality in the periodic table". Foundations of Chemistry. 13 (2): 121–129. doi:10.1007/s10698-011-9108-y. ISSN   1572-8463. S2CID   97285573.