 |
A disc mill is a type of crusher that can be used to grind, cut, shear, shred, fiberize, pulverize, granulate, crack, rub, curl, fluff, twist, hull, blend, or refine. It works in a similar manner to the ancient Buhrstone mill in that the feedstock is fed between opposing discs or plates. The discs may be grooved, serrated, or spiked.
Typical applications for a single-disc mill are all three stages of the wet milling of field corn, manufacture of peanut butter, processing nut shells, ammonium nitrate, urea, producing chemical slurries and recycled paper slurries, and grinding chromium metal.
Double-disc mills are typically used for alloy powders, aluminum chips, bark, barley, borax, brake lining scrap, brass chips, sodium hydroxide, chemical salts, coconut shells, copper powder, cork, cottonseed hulls, pharmaceuticals, feathers, hops, leather, oilseed cakes, phosphates, rice, rosin, sawdust, and seeds.
Disc mills are relatively expensive to run and maintain and they consume much more power than other shredding machines, and are not used where ball mills or hammermills produce the desired results at a lower cost.
Substances are crushed between the edge of a thick, spinning disk and something else. Some mills cover the edge of the disk in blades to chop up incoming matter rather than crush it.
 | This industry-related article is a stub. You can help Wikipedia by expanding it. |
A mortar and pestle is a set of two simple tools used to prepare ingredients or substances by crushing and grinding them into a fine paste or powder in the kitchen, laboratory, and pharmacy. The mortar is characteristically a bowl, typically made of hardwood, metal, ceramic, or hard stone such as granite. The pestle is a blunt, club-shaped object. The substance to be ground, which may be wet or dry, is placed in the mortar where the pestle is pounded, pressed, or rotated into the substance until the desired texture is achieved.
An abrasive is a material, often a mineral, that is used to shape or finish a workpiece through rubbing which leads to part of the workpiece being worn away by friction. While finishing a material often means polishing it to gain a smooth, reflective surface, the process can also involve roughening as in satin, matte or beaded finishes. In short, the ceramics which are used to cut, grind and polish other softer materials are known as abrasives.
A paper machine is an industrial machine which is used in the pulp and paper industry to create paper in large quantities at high speed. Modern paper-making machines are based on the principles of the Fourdrinier Machine, which uses a moving woven mesh to create a continuous paper web by filtering out the fibres held in a paper stock and producing a continuously moving wet mat of fibre. This is dried in the machine to produce a strong paper web.
A ball mill is a type of grinder used to grind or blend materials for use in mineral dressing processes, paints, pyrotechnics, ceramics, and selective laser sintering. It works on the principle of impact and attrition: size reduction is done by impact as the balls drop from near the top of the shell.
A mill is a device, often a structure, machine or kitchen appliance, that breaks solid materials into smaller pieces by grinding, crushing, or cutting. Such comminution is an important unit operation in many processes. There are many different types of mills and many types of materials processed in them. Historically mills were powered by hand or by animals, working animal, wind (windmill) or water (watermill). In modern era, they are usually powered by electricity.
Lapping is a machining process in which two surfaces are rubbed together with an abrasive between them, by hand movement or using a machine.
An end mill is a type of milling cutter, a cutting tool used in industrial milling applications. It is distinguished from the drill bit in its application, geometry, and manufacture. While a drill bit can only cut in the axial direction, most milling bits can cut in the radial direction. Not all mills can cut axially; those designed to cut axially are known as end mills.
A pulverizer or grinder is a mechanical device for the grinding of many different types of materials. For example, a pulverizer mill is used to pulverize coal for combustion in the steam-generating furnaces of coal power plants.
A raw mill is the equipment used to grind raw materials into "rawmix" during the manufacture of cement. Rawmix is then fed to a cement kiln, which transforms it into clinker, which is then ground to make cement in the cement mill. The raw milling stage of the process effectively defines the chemistry of the finished cement, and has a large effect upon the efficiency of the whole manufacturing process.
An edge mill is a mill used for crushing or grinding in which stones roll around on their edges on a level circular bed. They were developed in China in the third century and are still used today in remote villages around the world. When the millstones were replaced with iron or steel disks in the 19th century, the mills were known as Chilean mills.
Grinding is a type of abrasive machining process which uses a grinding wheel as cutting tool.
Surface grinding is done on flat surfaces to produce a smooth finish.
Roller mills are mills that use cylindrical rollers, either in opposing pairs or against flat plates, to crush or grind various materials, such as grain, ore, gravel, plastic, and others. Roller grain mills are an alternative to traditional millstone arrangements in gristmills. Roller mills for rock complement other types of mills, such as ball mills and hammermills, in such industries as the mining and processing of ore and construction aggregate; cement milling; and recycling.
Vertical roller mill is a type of grinder used to grind materials into extremely fine powder for use in mineral dressing processes, paints, pyrotechnics, cements and ceramics. It is an energy efficient alternative for a ball mill.
The IsaMill is an energy-efficient mineral industry grinding mill that was jointly developed in the 1990s by Mount Isa Mines Limited and Netzsch Feinmahltechnik ("Netzsch"), a German manufacturer of bead mills. The IsaMill is primarily known for its ultrafine grinding applications in the mining industry, but is also being used as a more efficient means of coarse grinding. By the end of 2008, over 70% of the IsaMill’s installed capacity was for conventional regrinding or mainstream grinding applications, with target product sizes ranging from 25 to 60 µm.
Poly diamond powder is a kind of synthetic diamond which is synthesized through detonation. Compared to mono diamond, poly diamond powder has more crystal edges and grinding surface, where every crystal edge has grinding force. During the polishing process, big grit can fall into small pieces so it can keep the sustaining grinding force without scratches.
Industrial porcelain enamel is the use of porcelain enamel for industrial, rather than artistic, applications. Porcelain enamel, a thin layer of ceramic or glass applied to a substrate of metal, is used to protect surfaces from chemical attack and physical damage, modify the structural characteristics of the substrate, and improve the appearance of the product.
Mechanical pulping is the process in which wood is separated or defibrated mechanically into pulp for the paper industry.