Dispersion (geology)

Last updated

Dispersion is a process that occurs in soils that are particularly vulnerable to erosion by water. In soil layers where clays are saturated with sodium ions ("sodic soils"), soil can break down very easily into fine particles and wash away. This can lead to a variety of soil and water quality problems, including:

Contents

Identifying dispersive soils

Dispersive soils are more common in older landscapes where leaching and illuviation processes have had more time to work. A source of sodium is also required. Possible sources can include weathering from soil parent materials or wind-blown salt deposition. Sodium ions are highly mobile in the soil solution and so they accumulate in the lower parts of the landscape.

The dispersive portion of a soil profile is generally confined to the subsoil, where soil-forming processes concentrate clay minerals and sodium. This means that dispersive soils may not be identified until they are disturbed in a way that exposes the subsoil to running water.

When observed in situ, dispersive soil textures may feel 'soapy', and in many cases the physical structure of subsoil layers will be prismatic or columnar. [2] A simplified version of the Emerson soil dispersion test [3] can be completed in the field on a 20-minute to two-hour timescale.

Laboratory tests used to diagnose a soil as dispersive focus on the cation exchange capacity of a soil sample and its cation breakdown. Soil cations are dominated by Ca2+, Mg2+, K+, and Na+, as well as H+ in acidic soils. The exchangeable sodium percentage ( "ESP", (sodium / (total cations)) * 100 ) is a key indicator derived from these measurements. Where ESP exceeds 5%, dispersive behaviour becomes possible, and is highly likely where ESP exceeds 15%. [4]

Managing dispersive soils

The best management approach to these soils is simply to avoid their disturbance. Maintaining vegetation cover of the soil is also important to minimize soil dispersion. [5] In agricultural systems, this may mean making an effort to prevent surface soil loss and/or damage, as the surface soil and ground cover form a protective barrier. Landscape-scale management of excess salt is also important, as secondary salinisation can induce dispersive behaviour in soil.

In places where disturbance has occurred, amelioration with gypsum can be helpful. Other options include:

See also

Related Research Articles

<span class="mw-page-title-main">Colloid</span> Mixture of an insoluble substance microscopically dispersed throughout another substance

A colloid is a mixture in which one substance consisting of microscopically dispersed insoluble particles is suspended throughout another substance. Some definitions specify that the particles must be dispersed in a liquid, while others extend the definition to include substances like aerosols and gels. The term colloidal suspension refers unambiguously to the overall mixture. A colloid has a dispersed phase and a continuous phase. The dispersed phase particles have a diameter of approximately 1 nanometre to 1 micrometre.

<span class="mw-page-title-main">Soil</span> Mixture of organic matter, minerals, gases, liquids, and organisms that together support life

Soil, also commonly referred to as earth or dirt, is a mixture of organic matter, minerals, gases, liquids, and organisms that together support the life of plants and soil organisms. Some scientific definitions distinguish dirt from soil by restricting the former term specifically to displaced soil.

<span class="mw-page-title-main">Sediment</span> Particulate solid matter that is deposited on the surface of land

Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone through lithification.

<span class="mw-page-title-main">Soil salinity</span> Salt content in the soil

Soil salinity is the salt content in the soil; the process of increasing the salt content is known as salinization. Salts occur naturally within soils and water. Salination can be caused by natural processes such as mineral weathering or by the gradual withdrawal of an ocean. It can also come about through artificial processes such as irrigation and road salt.

<span class="mw-page-title-main">Bentonite</span> Rock type or absorbent swelling clay

Bentonite is an absorbent swelling clay consisting mostly of montmorillonite which can either be Na-montmorillonite or Ca-montmorillonite. Na-montmorillonite has a considerably greater swelling capacity than Ca-montmorillonite.

In geotechnical engineering, soil structure describes the arrangement of the solid parts of the soil and of the pore space located between them. It is determined by how individual soil granules clump, bind together, and aggregate, resulting in the arrangement of soil pores between them. Soil has a major influence on water and air movement, biological activity, root growth and seedling emergence. There are several different types of soil structure. It is inherently a dynamic and complex system that is affected by different factors.

<span class="mw-page-title-main">Flocculation</span> Process by which colloidal particles come out of suspension to precipitate as floc or flake

In colloidal chemistry, flocculation is a process by which colloidal particles come out of suspension to sediment in the form of floc or flake, either spontaneously or due to the addition of a clarifying agent. The action differs from precipitation in that, prior to flocculation, colloids are merely suspended, under the form of a stable dispersion and are not truly dissolved in solution.

Tilth is a physical condition of soil, especially in relation to its suitability for planting or growing a crop. Factors that determine tilth include the formation and stability of aggregated soil particles, moisture content, degree of aeration, soil biota, rate of water infiltration and drainage. Tilth can change rapidly, depending on environmental factors such as changes in moisture, tillage and soil amendments. The objective of tillage is to improve tilth, thereby increasing crop production; in the long term, however, conventional tillage, especially plowing, often has the opposite effect, causing the soil carbon sponge to oxidize, break down and become compacted.

<span class="mw-page-title-main">Montmorillonite</span> Phyllosilicate group of minerals

Montmorillonite is a very soft phyllosilicate group of minerals that form when they precipitate from water solution as microscopic crystals, known as clay. It is named after Montmorillon in France. Montmorillonite, a member of the smectite group, is a 2:1 clay, meaning that it has two tetrahedral sheets of silica sandwiching a central octahedral sheet of alumina. The particles are plate-shaped with an average diameter around 1 μm and a thickness of 0.96 nm; magnification of about 25,000 times, using an electron microscope, is required to resolve individual clay particles. Members of this group include saponite, nontronite, beidellite, and hectorite.

Marine clay is a type of clay found in coastal regions around the world. In the northern, deglaciated regions, it can sometimes be quick clay, which is notorious for being involved in landslides.

This is an index of articles relating to soil.

Claypan is a dense, compact, slowly permeable layer in the subsoil. It has a much higher clay content than the overlying material, from which it is separated by a sharply defined boundary. The dense structure restricts root growth and water infiltration. Therefore, a perched water table might form on top of the claypan. In the Canadian classification system, claypan is defined as a clay-enriched illuvial B (Bt) horizon.

Hydrophobic soil is a soil whose particles repel water. The layer of hydrophobicity is commonly found at or a few centimeters below the surface, parallel to the soil profile. This layer can vary in thickness and abundance and is typically covered by a layer of ash or burned soil.

Soil chemistry is the study of the chemical characteristics of soil. Soil chemistry is affected by mineral composition, organic matter and environmental factors. In the early 1870s a consulting chemist to the Royal Agricultural Society in England, named J. Thomas Way, performed many experiments on how soils exchange ions, and is considered the father of soil chemistry. Other scientists who contributed to this branch of ecology include Edmund Ruffin, and Linus Pauling.

<span class="mw-page-title-main">Alkali soil</span> Soil type with pH > 8.5

Alkali, or Alkaline, soils are clay soils with high pH, a poor soil structure and a low infiltration capacity. Often they have a hard calcareous layer at 0.5 to 1 metre depth. Alkali soils owe their unfavorable physico-chemical properties mainly to the dominating presence of sodium carbonate, which causes the soil to swell and difficult to clarify/settle. They derive their name from the alkali metal group of elements, to which sodium belongs, and which can induce basicity. Sometimes these soils are also referred to as alkaline sodic soils.
Alkaline soils are basic, but not all basic soils are alkaline.

Soil biodiversity refers to the relationship of soil to biodiversity and to aspects of the soil that can be managed in relative to biodiversity. Soil biodiversity relates to some catchment management considerations.

The sodium adsorption ratio (SAR) is an irrigation water quality parameter used in the management of sodium-affected soils. It is an indicator of the suitability of water for use in agricultural irrigation, as determined from the concentrations of the main alkaline and earth alkaline cations present in the water. It is also a standard diagnostic parameter for the sodicity hazard of a soil, as determined from analysis of pore water extracted from the soil.

<span class="mw-page-title-main">Residual sodium carbonate index</span>

The residual sodium carbonate (RSC) index of irrigation water or soil water is used to indicate the alkalinity hazard for soil. The RSC index is used to find the suitability of the water for irrigation in clay soils which have a high cation exchange capacity. When dissolved sodium in comparison with dissolved calcium and magnesium is high in water, clay soil swells or undergoes dispersion which drastically reduces its infiltration capacity.

Clay chemistry is an applied subdiscipline of chemistry which studies the chemical structures, properties and reactions of or involving clays and clay minerals. It is a multidisciplinary field, involving concepts and knowledge from inorganic and structural chemistry, physical chemistry, materials chemistry, analytical chemistry, organic chemistry, mineralogy, geology and others.

<span class="mw-page-title-main">Soil aggregate stability</span> Ability of soil aggregates to resist breaking apart when exposed to external forces such as erosion

Soil aggregate stability is a measure of the ability of soil aggregates—soil particles that bind together—to resist breaking apart when exposed to external forces such as water erosion and wind erosion, shrinking and swelling processes, and tillage. Soil aggregate stability is a measure of soil structure and can be affected by soil management.

References

  1. "Dispersion". vro.agriculture.vic.gov.au. Archived from the original on 2018-03-19.
  2. "Soil sodicity | Soil properties".
  3. "Soil survey standard test method - Emerson Aggregate Test" (PDF). Department of Sustainable Natural Resources.
  4. Carey, Bruce. "Understanding dispersive soils" (PDF). Archived from the original (PDF) on 2015-03-24. Retrieved 2015-09-08.
  5. "Dispersive Soils and their Management - Technical Reference Manual". dpipwe.tas.gov.au. Archived from the original on 2017-03-28. Retrieved 2017-03-27.