Dissolve (filmmaking)

Last updated
A dissolve transition between two still images

In the post-production process of film and video editing, a dissolve (sometimes called a lap dissolve) is a type of film transition in which one sequence fades over another. The terms fade-out (also called fade to black) and fade-in are used to describe a transition to and from a blank image. This is in contrast to a cut, where there is no such transition. A dissolve overlaps two shots for the duration of the effect, usually at the end of one scene and the beginning of the next, but may also be used in montage sequences. Generally, but not always, the use of a dissolve is held to indicate that a time has passed between the two scenes. Also, it may indicate a change of location or the start of a flashback.

Contents

Creation of effect

In the film, this effect is usually created with an optical printer by controlling double exposure from frame to frame. In linear video editing or live television production, the same effect is created by interpolating the voltages of two synchronized video signals. In non-linear video editing, a dissolve is done using software, by interpolating gradually between the RGB values of each pixel of the image. The audio track optionally cross-fades between the soundtracks.

Use

A dissolve from The Stranger , directed by Orson Welles, used to indicate a transition in time and place

Cuts and dissolves are used differently. A camera cut changes the perspective from which a scene is portrayed. It is as if the viewer suddenly and instantly moved to a different place, and could see the scene from another angle.

Fades and dissolves typically have a duration of 1 to 2 seconds (24–48 frames), though this may vary according to the preference of the director and editor. Short dissolves (6–12 frames) may be used to soften obvious hard cuts which may startle the viewer, or jump cuts.

In narrative terms, the length of the dissolve is dictated by the mood or pacing the director or editor wishes to create. For instance, in the opening sequence of Citizen Kane , the dissolves between the master shots are slow because of the pervading sense of morbidity Welles and his collaborators wished to create. In the "News on the March" (montage) sequence shortly afterwards, however, the dissolves are much shorter as the intention is to create a sense of vitality in the life of the still mysterious lead character and speed in the (supposedly) newsreel sequence.

Dissolves are most common in classic cinema (see continuity editing), but are now less often used. The device began to fall into disuse as filmmakers fell under the influence of the French New Wave directors and their innovative use of the jump cut and as the absence of a linear narrative became more common. It is also sometimes held that the effect was best utilized in monochrome cinematography, where gradations of gray are mixed rather than possibly incompatible color tones. The impact of television news reporting may also have resulted in the device losing any pretense of having a contemporary feel.

Dissolves are usually kept to a minimum in most films and shows. Due mainly to stylistic tastes, it is very rare to see a shot which both begins and ends with a dissolve

See also

Related Research Articles

In film and video, a cutaway is the interruption of a continuously filmed action by inserting a view of something else. It is usually followed by a cut back to the first shot. A cutaway scene is the interruption of a scene with the insertion of another scene, generally unrelated or only peripherally related to the original scene. The interruption is usually quick, and is usually, although not always, ended by a return to the original scene. The effect is of commentary to the original scene and creates variety.

<span class="mw-page-title-main">Film editing</span> Creative and technical part of the post-production process of filmmaking

Film editing is both a creative and a technical part of the post-production process of filmmaking. The term is derived from the traditional process of working with film which increasingly involves the use of digital technology. When putting together some sort of video composition, typically, you would need a collection of shots and footages that vary from one another. The act of adjusting the shots you have already taken, and turning them into something new is known as film editing.

In animation and filmmaking, a key frame is a drawing or shot that defines the starting and ending points of a smooth transition. These are called frames because their position in time is measured in frames on a strip of film or on a digital video editing timeline. A sequence of key frames defines which movement the viewer will see, whereas the position of the key frames on the film, video, or animation defines the timing of the movement. Because only two or three key frames over the span of a second do not create the illusion of movement, the remaining frames are filled with "inbetweens".

<span class="mw-page-title-main">Cinematography</span> Art of motion picture photography

Cinematography is the art of motion picture photography.

<span class="mw-page-title-main">Jump cut</span> Cut in film editing

A jump cut is a cut in film editing that breaks a single continuous sequential shot of a subject into two parts, with a piece of footage removed to create the effect of jumping forward in time. Camera positioning on the subject across the sequence should vary only slightly to achieve the effect. The technique manipulates temporal space using the duration of a single shot—fracturing the duration to move the audience ahead. This kind of cut abruptly communicates the passing of time, as opposed to the more seamless dissolve heavily used in films predating Jean-Luc Godard's Breathless, which extensively used jump cuts and popularized the technique in the 1960s. For this reason, jump cuts are considered a violation of classical continuity editing, which aims to give the appearance of continuous time and space in the story-world by de-emphasizing editing, but are sometimes nonetheless used for creative purposes. Jump cuts tend to draw attention to the constructed nature of the film. More than one jump cut is sometimes used in a single sequence.

<span class="mw-page-title-main">Slow motion</span> Effect in film-making

Slow motion is an effect in film-making whereby time appears to be slowed down. It was invented by the Austrian priest August Musger in the early 20th century. This can be accomplished through the use of high-speed cameras and then playing the footage produced by such cameras at a normal rate like 30 fps, or in post production through the use of software.

<span class="mw-page-title-main">Film transition</span> Technique by which scenes or shots of a film are combined

A film transition is a technique used in the post-production process of film editing and video editing by which scenes or shots are combined. Most commonly this is through a normal cut to the next shot. Most films will also include selective use of other transitions, usually to convey a tone or mood, suggest the passage of time, or separate parts of the story. These other transitions may include dissolves, L cuts, fades, match cuts, and wipes.

In video technology, 24p refers to a video format that operates at 24 frames per second frame rate with progressive scanning. Originally, 24p was used in the non-linear editing of film-originated material. Today, 24p formats are being increasingly used for aesthetic reasons in image acquisition, delivering film-like motion characteristics. Some vendors advertise 24p products as a cheaper alternative to film acquisition.

<span class="mw-page-title-main">180-degree rule</span> Principle in filmmaking

In filmmaking, the 180-degree rule is a basic guideline regarding the on-screen spatial relationship between a character and another character or object within a scene. The rule states that the camera should be kept on one side of an imaginary axis between two characters, so that the first character is always frame right of the second character. Moving the camera over the axis is called jumping the line or crossing the line; breaking the 180-degree rule by shooting on all sides is known as shooting in the round.

Continuity editing is the process, in film and video creation, of combining more-or-less related shots, or different components cut from a single shot, into a sequence to direct the viewer's attention to a pre-existing consistency of story across both time and physical location. Often used in feature films, continuity editing, or "cutting to continuity", can be contrasted with approaches such as montage, with which the editor aims to generate, in the mind of the viewer, new associations among the various shots that can then be of entirely different subjects, or at least of subjects less closely related than would be required for the continuity approach. When discussed in reference to classical Hollywood cinema, it may also be referred to as classical continuity.

This article contains a list of cinematic techniques that are divided into categories and briefly described.

Shot transition detection also called cut detection is a field of research of video processing. Its subject is the automated detection of transitions between shots in digital video with the purpose of temporal segmentation of videos.

In film, a match cut is a cut from one shot to another in which the composition of the two shots are matched by the action or subject and subject matter. For example, in a duel a shot can go from a long shot on both contestants via a cut to a medium closeup shot of one of the duellists. The cut matches the two shots and is consistent with the logic of the action. This is a standard practice in film-making, to produce a seamless reality-effect.

<span class="mw-page-title-main">Soviet montage theory</span> A theory of film that developed in Soviet Russia

Soviet montage theory is an approach to understanding and creating cinema that relies heavily upon editing. It is the principal contribution of Soviet film theorists to global cinema, and brought formalism to bear on filmmaking.

In the post-production process of film editing and video editing, a cut is an abrupt, but usually trivial film transition from one sequence to another. It is synonymous with the term edit, though "edit" can imply any number of transitions or effects. The cut, dissolve, and wipe serve as the three primary transitions. The term refers to the physical action of cutting film or videotape, but also refers to a similar edit performed in software; it has also become associated with the resulting visual "break".

One of the principal features defining traditional cinema is a fixed and linear narrative structure. In Database Cinema however, the story develops by selecting scenes from a given collection like a computer game in which a player performs certain acts and thereby selects scenes and creating a narrative.

<span class="mw-page-title-main">Film</span> Visual art consisting of moving images

A film – also called a movie, motion picture, moving picture, picture, photoplay or (slang) flick – is a work of visual art that simulates experiences and otherwise communicates ideas, stories, perceptions, feelings, beauty, or atmosphere through the use of moving images. These images are generally accompanied by sound and, more rarely, other sensory stimulations. The word "cinema", short for cinematography, is often used to refer to filmmaking and the film industry, and the art form that is the result of it.

Articles related to the field of motion pictures include:

The psychology of film is a sub-field of the psychology of art that studies the characteristics of film and its production in relation to perception, cognition, narrative understanding, and emotion. A growing number of psychological scientists and brain scientists have begun conducting empirical studies that describe the cognitive and biological underpinnings of motion pictures or what has been called "psychocinematics". Early theoretical approaches included works by psychologists Hugo Münsterberg and Rudolf Arnheim. Cognitive film theorists David Bordwell and Noël Carroll fostered its philosophical underpinnings.

This glossary of motion picture terms is a list of definitions of terms and concepts related to motion pictures, filmmaking, cinematography, and the film industry in general.

References