Dublin Bay 21

Last updated

The Dublin Bay 21 footer yacht is a one-design wooden sailing boat designed for sailing in Dublin Bay.

Contents

The seven yachts were designed by Alfred Mylne and built between 1903 and 1906 under a commission from Dublin Bay Sailing Club to encourage inexpensive one-design racing in recognition of the success of the Water Wag one-design of 1887 and the Colleen Class of 1897. They may be the oldest class of racing keelboat yacht in the world. [1]

The first race took place on 19 June 1903 in Dublin Bay. [2]

List of boats

The seven sisters [3]

The class is now being rebuilt following a long period out of service when the fleet lay in various states of disrepair in Jack Tyrrell's boatyard in Arklow, County Wicklow. The fleet were taken out of the water in 1986 after Hurricane Charley ruined active Dublin Bay 21 fleet racing in August of that year. Two 21s sank in the storm, suffering the same fate as their sister ship Estelle four years earlier. [4]

Currently Naneen, Garavogue, Estelle and Geraldine are rebuilt and back on the water. Oola is currently being rebuilt and due to sail again in 2024 while the frames are constructed for Maureen and Inisfallen who will hopefully be back on the water by 2025.

The sail plan of the rebuilt boats is a modification of the original cutter with topsails but it is a sail plan designed by Milne in 1918. It consists of a single jib, higher gaff with no topsail. While a spinnaker is facilitated it has not been installed which makes for easier handling as the art of sailing classic boats is brought back into being. It is said that these boats present one of the loveliest sights to be seen on any sailing waters in the world. [1]

Dimensions

Overall length- 32'-6'

Beam- 7'-6"

Keel lead- 2 tons.

Sail area- 600sq.ft.

Change of rig

In 1964, some of the owners thought that the boats were outdated, and needed a new breath of fresh air. After extensive discussions between all the owners, the gaff rig and timber mast was abandoned in favour of a more fashionable Bermudan rig with an aluminium mast. Unfortunately, this rig put previously unforeseen loads on the hulls, resulting in some permanent damage.[ citation needed ]

Related Research Articles

<span class="mw-page-title-main">Sloop</span> Sail boat with a single mast and a fore-and-aft rig

A sloop is a sailboat with a single mast typically having only one headsail in front of the mast and one mainsail aft of (behind) the mast. Such an arrangement is called a fore-and-aft rig, and can be rigged as a Bermuda rig with triangular sails fore and aft, or as a gaff-rig with triangular foresail(s) and a gaff rigged mainsail.

<span class="mw-page-title-main">Schooner</span> Sailing vessel

A schooner is a type of sailing vessel defined by its rig: fore-and-aft rigged on all of two or more masts and, in the case of a two-masted schooner, the foremast generally being shorter than the mainmast. A common variant, the topsail schooner also has a square topsail on the foremast, to which may be added a topgallant. Differing definitions leave uncertain whether the addition of a fore course would make such a vessel a brigantine. Many schooners are gaff-rigged, but other examples include Bermuda rig and the staysail schooner.

<span class="mw-page-title-main">Rig (sailing)</span> Description of the specific ways that a sailing craft is rigged

A sailing vessel's rig is its arrangement of masts, sails and rigging. Examples include a schooner rig, cutter rig, junk rig, etc. A rig may be broadly categorized as "fore-and-aft", "square", or a combination of both. Within the fore-and-aft category there is a variety of triangular and quadrilateral sail shapes. Spars or battens may be used to help shape a given kind of sail. Each rig may be described with a sail plan—formally, a drawing of a vessel, viewed from the side.

<span class="mw-page-title-main">Bermuda sloop</span> 17th century sailing vessel

The Bermuda sloop is a historical type of fore-and-aft rigged single-masted sailing vessel developed on the islands of Bermuda in the 17th century. Such vessels originally had gaff rigs with quadrilateral sails, but evolved to use the Bermuda rig with triangular sails. Although the Bermuda sloop is often described as a development of the narrower-beamed Jamaica sloop, which dates from the 1670s, the high, raked masts and triangular sails of the Bermuda rig are rooted in a tradition of Bermudian boat design dating from the earliest decades of the 17th century. It is distinguished from other vessels with the triangular Bermuda rig, which may have multiple masts or may not have evolved in hull form from the traditional designs.

<span class="mw-page-title-main">Catboat</span> Type of sailboat

A catboat is a sailboat with a single sail on a single mast set well forward in the bow of a very beamy and (usually) shallow draft hull. Typically they are gaff rigged, though Bermuda rig is also used. Most are fitted with a centreboard, although some have a keel. The hull can be 3.7 to 12.2 metres long with a beam half as wide as the hull length at the waterline. The type is mainly found on that part of the Eastern seaboard of the USA from New Jersey to Massachusetts.

<span class="mw-page-title-main">Cutter (boat)</span> Type of boat

A cutter is a name for various types of watercraft. It can apply to the rig of a sailing vessel, to a governmental enforcement agency vessel, to a type of ship's boat which can be used under sail or oars, or, historically, to a type of fast-sailing vessel introduced in the 18th century, some of which were used as small warships.

<span class="mw-page-title-main">Gaff rig</span> Sailing rig configuration

Gaff rig is a sailing rig in which the sail is four-cornered, fore-and-aft rigged, controlled at its peak and, usually, its entire head by a spar (pole) called the gaff. Because of the size and shape of the sail, a gaff rig will have running backstays rather than permanent backstays.

<span class="mw-page-title-main">Bermuda rig</span> Configuration of mast and rigging for a type of sailboat

A Bermuda rig, Bermudian rig, or Marconi rig is a configuration of mast and rigging for a type of sailboat and is the typical configuration for most modern sailboats. This configuration was developed in Bermuda in the 17th century; the term Marconi, a reference to the inventor of the radio, Guglielmo Marconi, became associated with this configuration in the early 20th century, because the wires that stabilize the mast of a Bermuda rig reminded observers of the wires on early radio masts.

<span class="mw-page-title-main">12 Metre</span> International racing sailing class

The 12 Metre class is a rating class for racing sailboats that are designed to the International rule. It enables fair competition between boats that rate in the class whilst retaining the freedom to experiment with the details of their designs. The designation "12 Metre" does not refer to any single measurement on the boat, and is not referencing the vessels overall length, rather, measures the sum of the components directed by the formula which governs design and construction parameters. Typically 12 Metre class boats range from 65 to 75 feet in length overall; they are most often sloop-rigged, with masts roughly 85 feet tall.

<span class="mw-page-title-main">Friendship Sloop</span> [[Gaff rig|Gaff-rigged]] sailboat

The Friendship sloop, also known as a Muscongus Bay sloop or lobster sloop, is a gaff-rigged working boat design that originated in Friendship, Maine around 1880 and has survived as a traditional-style sailboat.

<span class="mw-page-title-main">Smack (ship)</span> Sailing ship type

A smack was a traditional fishing boat used off the coast of Britain and the Atlantic coast of America for most of the 19th century and, in small numbers, up to the Second World War. Many larger smacks were originally cutter-rigged sailing boats until about 1865, when smacks had become so large that cutter main booms were unhandy. The smaller smacks retained the gaff cutter rig. The larger smacks were lengthened and re-rigged and new ketch-rigged smacks were built, but boats varied from port to port. Some boats had a topsail on the mizzen mast, while others had a bowsprit carrying a jib.

<span class="mw-page-title-main">Nobby (boat)</span> Type of fishing boat used in north-west England

The nobby is an inshore sailing boat which was used as a traditional fishing boat around Lancashire and the Isle of Man. The Lancashire nobby originated in Morecambe Bay about 1840 and around Southport. It subsequently came into widespread use down the north west coast of England. The Manx nobby first appeared in the 1880s and was used around the Isle of Man. Many localities on the coast of Great Britain developed their own type of fishing boat adapted to local fishing and sea conditions, and the nobbies are examples of this.

The Norfolk Heritage Fleet Trust is a waterway society and charitable trust based at Hunter's Yard, Ludham on the Norfolk Broads, England, UK. The Trust maintains and hires out a fleet of wooden sailing yachts from the 1930s.

The Colleen is a one-design wooden sailing keelboat originally designed for sailing in Dublin Bay, Ireland.

<span class="mw-page-title-main">12 foot dinghy</span>

The Twelve Foot Dinghy was designed by George Cockshott, an amateur boat designer from Southport, England in response to a 1912 design contest. It became the first one-design racing dinghy to achieve international recognition. The class was granted the 'International' status by the IYRU in 1919 and remained this status until 1964 when it was revoked by the same authority. The class was selected as the dinghy class for the Olympics in 1920 & 1928. In 1924 the French wanted to use an alternate French design.

The Water Wag is the oldest one-design dinghy in existence, having been devised in 1886 and formalised as a one-design class in Ireland in 1887. It was last modified in 1900. The class is still sailed to this day, notably with large Water Wag fleets racing during summer evenings from Dún Laoghaire harbour on Dublin Bay. The Water Wag class is administered by the Water Wags club, based in Dún Laoghaire.

<i>Ariki</i> (yacht)

Ariki is a racing yacht which was built in Auckland, New Zealand in 1904 by Logan Brothers. She had a distinguished career as a racing and cruising yacht. From the time of her launch in Oct 1904 she dominated first class Auckland yacht racing until the appearance of the yacht Ranger in 1938. She has the sail number A3.

<span class="mw-page-title-main">Falmouth working boat</span>

The Falmouth Working Boat is a type of small traditional sailing craft that evolved for fishing in the waters of Falmouth, Cornwall.

The following outline is provided as an overview of and topical guide to sailing:

<span class="mw-page-title-main">Sail plan</span> Technical drawing of a sailing craft

A sail plan is a drawing of a sailing craft, viewed from the side, depicting its sails, the spars that carry them and some of the rigging that supports the rig. By extension, "sail plan" describes the arrangement of sails on a craft. A sailing craft may be waterborne, an iceboat, or a sail-powered land vehicle.

References

  1. 1 2 Kilkenny City Online Archived November 17, 2007, at the Wayback Machine
  2. The Twenty-Ones and the Joyce of Sailing by Fionan de Barra
  3. "Mylne's Register of Yachts 2012" (PDF). Mylne Yacht Design. 2012-10-12. Retrieved 2014-01-26.
  4. Class of 21 deserves some loving care

https://www.dublinbay21.ie