EPA WaterSense

Last updated
EPA poster publicizing WaterSense products Choose WaterSense (13587197363).jpg
EPA poster publicizing WaterSense products

WaterSense is a program sponsored by the U.S. Environmental Protection Agency (EPA), designed to encourage water efficiency in the United States through the use of a special label on consumer products. [1] The goal of this program is to protect the future of the U.S. water supply. WaterSense maintains partnerships with key utility, manufacturer and retail partners across the United States. WaterSense is voluntary, rather than a regulatory program. The EPA develops specifications for water-efficient products – low-flow fixtures – through a public process. If a manufacturer makes a product that meets those specifications, the product is eligible for third-party testing to ensure the stated efficiency and performance criteria have been met. If the product passes the test, the manufacturer is rewarded with the right to put the WaterSense label on that product. [2]

Contents

Background

WaterSense, established in 2006, is a voluntary program sponsored by the EPA as a by-product of the Energy Policy and Conservation Act (otherwise known as the Energy Policy Act, or EPACT92), enacted by the United States Congress in 1992. The initiative was in response to 42 U.S.C. §6295(j)-(k), which addresses the conservation of water supply in the United States. [3] EPACT92 mandated new volume-based efficiency standards for toilets, showerheads and faucets as follows: toilets must be manufactured with a maximum flush volume of 1.6 gallons per flush (gpf); showerheads must be manufactured with a flow rate of 2.5 gallons per minute (gpm) at 80 pound-force per square inch (psi); and faucets must be manufactured with a flow rate no more than 2.5 gpm. [4] These standards were required to take effect in January 1994, along with flow-rate labelling requirements and recommendations for the establishment of voluntary replacement programs. [5]

In response to these recommendations, and in anticipation of similar impacts provided by the Energy Star program (on water rather than energy), the EPA launched WaterSense in 2006. The WaterSense label was designed to be voluntarily, sought out by manufacturers, and requires that water fixtures use at least 20% less than the federally mandated standards as established by EPACT92. [3] Using the efficiency standards established by EPACT92 as a baseline, the EPA instituted the following flow-rate guidelines for WaterSense: toilets must be manufactured with a maximum flush volume of 1.28 gpf; showerheads must have a maximum flow-rate of 2.0 gpm at 80 psi; and bathroom faucets must be manufactured with a low-flow volume rate of 1.5 gpm. [4] Low-flow toilets were the first products to receive the WaterSense label in 2007, followed by bathroom sink faucets in October of that same year. [6]

The objective of the program is to educate consumers on water conservation and to promote the WaterSense label. The program was originally designed to promote consumer products (namely, low-flow water fixtures). The program, however, has since expanded to the certification of homes and accreditation of irrigation professionals. [3] The EPA issued revised draft specifications for landscape irrigation controllers in January 2011. [7] Specifications for pre-rinse spray valves and water softeners started development as of 2011. [8] [9] In June 2014, WaterSense began the certification of homes, designed to use 20% less water than standard new construction, as well as the accreditation of irrigation professionals for the installation, maintenance, design and auditing of systems. [10] There are no federal standards for irrigation equipment in the U.S., so the EPA uses references average system efficiency to establish a baseline and volume-based guidelines. The home certification program, called the WaterSense "New Home Specification" program, specifies criteria for residential indoor and outdoor water use, as well as homeowner education. [3] Version 2.0 of "WaterSense Specification for Homes" can be viewed here. [11]

Between the years of 2006 and 2020, the EPA has projected that its water conservation program has saved approximately 5.3 trillion gallons of water and 603 billion kilowatt hours of electricity from power required to distribute and handle water. [10] Although EPACT92 was the impetus for this initiative, the WaterSense program currently operates under a number of congressional authorities, such as the Clean Water Act and the Safe Drinking Water Act. [3] [10]

In 2016, a number of proposals were introduced by the 114th Congress to expand the WaterSense , but no consensus was made. [12] In 2018, the 115th Congress made amendments to the program in Section 4306 of America's Water Infrastructure Act (AWIA) of 2018. [10] The EPA had no legal authority over WaterSense or its specifications until the enactment of the AWIA. Section 4306 of AWIA mandates that these specifications "must reduce water use, decrease strain on water systems, conserve energy, and preserve water resources." [13] The AWIA now requires the EPA to enforce these specifications, although the program is still voluntary, and to update them every six years. In addition to the previously existing parameters of the program, the Act also encourages the EPA to expand the program beyond water conservation to promote technology for the treatment, reuse and recycling of non-potable water. [13]

Product and Service Specifications

Poster promoting WaterSense showerheads Save Energy, Save Money (15812223659).jpg
Poster promoting WaterSense showerheads

Consumer products, such as residential and commercial toilets; bathroom faucets (and accessories); urinals; showerheads; irrigation controllers; and spray sprinkler bodies are eligible for receiving the WaterSense label. [10] Residential new construction is also able to receive the WaterSense "Homes Specification" certification and irrigation professionals who have undergone training by WaterSense-labeled certification program can receive accreditation. [14]

Products that seek the WaterSense label must:

Note: Products do not require recertification, but 15% of all labeled products are audited annually by the EPA. [10]

Homes that seek certification must be at least 30% more efficient than a conventional new home and also meet homeowner expectations for performance. [16]

The EPA administers educational material and exams to allow irrigation professionals to WaterSense accreditation. Exams must be renewed every two years to maintain credit. [14]

Partnerships

EPA recruits partners in several different categories including:

Partner responsibilities include:

WaterSense also utilizes promotional partners who endorse and publicize the program among their constituents. Promotional partners include utilities, state and local governments, trade associations, and other non-governmental organizations.

Quantifying the Impact

The EPA requires that all manufacturer and retailer/distributor partners provide data on their distribution and activities regarding WaterSense product shipment, sales and outreach. Lawrence Berkeley National Library (LBNL) uses this data to create a National Water Savings (NWS) model to track water and energy savings. According to this model, consumers have saved 1.5 trillion gallons of water and $32.6 billion on utility bills. [18] LBNL used this data to create an arithmetic model to estimate the impacts that WaterSense has had on water conservation in the United States. The model is the difference between the federally-mandated efficiency baseline for water fixtures and the efficiency of WaterSense labeled products that have been sold annually. This model is also responsible for determining the financial impacts of water savings for U.S. consumers. [18]

Related Research Articles

Sustainable living describes a lifestyle that attempts to reduce the use of Earth's natural resources by an individual or society. Its practitioners often attempt to reduce their ecological footprint by altering their home designs and methods of transportation, energy consumption and diet. Its proponents aim to conduct their lives in ways that are consistent with sustainability, naturally balanced, and respectful of humanity's symbiotic relationship with the Earth's natural ecology. The practice and general philosophy of ecological living closely follows the overall principles of sustainable development.

<span class="mw-page-title-main">Energy Star</span> US energy efficiency program

Energy Star is a program run by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy (DOE) that promotes energy efficiency. The program provides information on the energy consumption of products and devices using different standardized methods. The Energy Star label is found on more than 75 different certified product categories, homes, commercial buildings, and industrial plants. In the United States, the Energy Star label is also shown on the Energy Guide appliance label of qualifying products.

<span class="mw-page-title-main">Water conservation</span> Policies for sustainable development of water use

Water conservation includes all the policies, strategies and activities to sustainably manage the natural resource of fresh water, to protect the hydrosphere, and to meet the current and future human demand. Population, household size and growth and affluence all affect how much water is used. Factors such as climate change have increased pressures on natural water resources especially in manufacturing and agricultural irrigation. Many countries have already implemented policies aimed at water conservation, with much success. The key activities to conserve water are as follows: any beneficial reduction in water loss, use and waste of resources, avoiding any damage to water quality; and improving water management practices that reduce the use or enhance the beneficial use of water. Technology solutions exist for households, commercial and agricultural applications. Water conservation programs involved in social solutions are typically initiated at the local level, by either municipal water utilities or regional governments.

<span class="mw-page-title-main">Energy conservation</span> Reducing energy consumption

Energy conservation is the effort to reduce wasteful energy consumption by using fewer energy services. This can be done by using energy more effectively or changing one's behavior to use less service. Energy conservation can be achieved through efficient energy use, which has some advantages, including a reduction in greenhouse gas emissions and a smaller carbon footprint, as well as cost, water, and energy savings.

<span class="mw-page-title-main">Energy Policy Act of 1992</span>

The Energy Policy Act of 1992, effective October 24, 1992, is a United States government act. It was passed by Congress and set goals, created mandates, and amended utility laws to increase clean energy use and improve overall energy efficiency in the United States. The Act consists of twenty-seven titles detailing various measures designed to lessen the nation's dependence on imported energy, provide incentives for clean and renewable energy, and promote energy conservation in buildings.

<span class="mw-page-title-main">Ecolabel</span> Labeling systems for food and consumer products

Ecolabels and Green Stickers are labeling systems for food and consumer products. The use of ecolabels is voluntary, whereas green stickers are mandated by law; for example, in North America major appliances and automobiles use Energy Star. They are a form of sustainability measurement directed at consumers, intended to make it easy to take environmental concerns into account when shopping. Some labels quantify pollution or energy consumption by way of index scores or units of measurement, while others assert compliance with a set of practices or minimum requirements for sustainability or reduction of harm to the environment. Many ecolabels are focused on minimising the negative ecological impacts of primary production or resource extraction in a given sector or commodity through a set of good practices that are captured in a sustainability standard. Through a verification process, usually referred to as "certification", a farm, forest, fishery, or mine can show that it complies with a standard and earn the right to sell its products as certified through the supply chain, often resulting in a consumer-facing ecolabel.

<span class="mw-page-title-main">Sustainable Development Strategy in Canada</span>

Sustainable Development Strategy for organizations in Canada is about the Government of Canada finding ways to develop social, financial, and environmental resources that meet the needs of the present without compromising the ability of future generations to meet their own needs in Canada. A Sustainable Development Strategy for the organization needs to be developed that establishes the Sustainable Development goals and objectives set by the Auditor General Act of Canada and provides the written policies and procedures to achieve them. Sustainable Development is based on responsible decision-making, which considers not only the economic benefits of development, but also the short-term and long-term, Canadian environment and environmental impacts.

Design for the Environment (DfE) is a design approach to reduce the overall human health and environmental impact of a product, process or service, where impacts are considered across its life cycle. Different software tools have been developed to assist designers in finding optimized products or processes/services. DfE is also the original name of a United States Environmental Protection Agency (EPA) program, created in 1992, that works to prevent pollution, and the risk pollution presents to humans and the environment. The program provides information regarding safer chemical formulations for cleaning and other products. EPA renamed its program "Safer Choice" in 2015.

<span class="mw-page-title-main">Water efficiency</span>

Water efficiency is the practice of reducing water consumption by measuring the amount of water required for a particular purpose and is proportionate to the amount of essential water used. Water efficiency differs from water conservation in that it focuses on reducing waste, not restricting use. Solutions for water efficiency not only focus on reducing the amount of potable water used but also on reducing the use of non-potable water where appropriate. It also emphasizes the influence consumers can have on water efficiency by making small behavioral changes to reduce water wastage, and by choosing more water-efficient products.

A low-flush toilet is a flush toilet that uses significantly less water than traditional high-flow toilets. Before the early 1990s in the United States, standard flush toilets typically required at least 3.5 gallons per flush and they used float valves that often leaked, increasing their total water use. In the early 1990s, because of concerns about water shortages, and because of improvements in toilet technology, some states and then the federal government began to develop water-efficiency standards for appliances, including toilets, mandating that new toilets use less water. The first standards required low-flow toilets of 1.6 gallons per flush. Further improvements in the technology to overcome concerns about the initial poor performance of early models have further cut the water use of toilets and while federal standards stagnate at 1.6 gallons per flush, certain states' standards toughened up to require that new toilets use no more than 1.28 gallons per flush, while working far better than older models. Low-flush toilets include single-flush models and dual-flush toilets, which typically use 1.6 US gallons per flush for the full flush and 1.28 US gallons or less for a reduced flush.

<span class="mw-page-title-main">Dual flush toilet</span> Flush toilet that uses two buttons to flush different amounts of water

A dual flush toilet is a variation of the flush toilet that uses two buttons or a handle mechanism to flush different amounts of water.

The California Green Lodging Program is an initiative in California that encourages hotels in the state to save water and energy and reduce waste. It is run by the California Department of General Services. Hotels are evaluated on a set of environmental criteria and, depending how well these are satisfied, certificates are awarded at two levels.

The California Green Building Standards Code is Part 11 of the California Building Standards Code and is the first statewide "green" building code in the US.

United States Lighting Energy Policy is moving towards increased efficiency in order to lower greenhouse gas emissions and energy use. Lighting efficiency improvements in the United States can be seen through different standards and acts. The Energy Independence and Security Act of 2007 laid out changes in lighting legislation for the United States. This set up performance standards and the phase-out of incandescent light bulbs in order to require the use of more efficient fluorescent lighting. EISA 2007 is an effort to increase lighting efficiency by 25-30%. Opposition to EISA 2007 is demonstrated by the Better Use of Light Bulbs Act and the Light Bulb Freedom of Choice Act. The efforts to increase lighting efficiency are also demonstrated by the Energy Star program and the increase efficiency goals by 2011 and 2013. A ban on the manufacture and sale of most general purpose incandescent bulbs in the U.S. took effect on August 1, 2023.

Niagara Conservation is a manufacturing company based in Fort Worth, Texas best known for its plumbing products and its water conservation efforts. Niagara Conservation also manufactures lighting fixtures, light bulbs, caulks, sealants, and weatherization products.

The Energy Conservation Program for Consumer Products Other Than Automobiles is a regulatory program that enforces minimum energy conservation standards for appliances and equipment in the United States. The program was established under Part B of Title III of the Energy Policy and Conservation Act of 1975 and gives the Department of Energy (DOE) the authority to develop and implement test procedures and minimum standards for more than 50 products covering residential, commercial and industrial, lighting, and plumbing applications. The Department of Energy is required to set standards that are "technologically feasible and economically justified."

<span class="mw-page-title-main">EPA Safer Choice</span>

The U.S. Environmental Protection Agency’s (EPA's) Safer Choice label, previously known as the Design for the Environment (DfE) label, helps consumers and commercial buyers identify and select products with safer chemical ingredients, without sacrificing quality or performance. When a product has the Safer Choice label, it means that every intentionally-added ingredient in the product has been evaluated by EPA scientists. Only the safest possible functional ingredients are allowed in products with the Safer Choice label.

<span class="mw-page-title-main">Residential water use in the U.S. and Canada</span>

Residential water use includes all indoor and outdoor uses of drinking quality water at single-family and multifamily dwellings. These uses include a number of defined purposes such as flushing toilets, washing clothes and dishes, showering and bathing, drinking, food preparation, watering lawns and gardens, and maintaining swimming pools. Some of these end uses are detectable while others are more difficult to gauge.

<span class="mw-page-title-main">Nonresidential water use in the U.S.</span>

Nonresidential water use refers to all uses of publicly-supplied (municipal) water other than residential use. The nonresidential users include industrial (I), commercial (C), and institutional (I) sub-sectors, which are often jointly designated as ICI or CII sector.

A low-flow fixture is a water saving plumbing fixture designed to achieve water savings by having a lower flow rate of water or a smaller quantity per flush. Some of these low-flow fixtures are faucets, showerheads, and toilets. In the United States a maximum water usage of conventional plumbing fixtures was federally mandated by the Energy policy act of 1992. Low-flow fixtures are designed to save water over conventional fixtures by having a lower flow rate while still maintaining satisfactory performance. The Environmental protection agency (EPA) WaterSense program has requirements for plumbing fixtures to achieve their definition for water saving low-flow.

References

  1. ↑ U.S. Environmental Protection Agency (EPA), Washington, DC. "WaterSense Timeline." Archived February 17, 2011, at the Wayback Machine Revised 2011-04-14.
  2. ↑ EPA. "WaterSense: Product Certification and Labeling." Revised 2011-04-14.
  3. 1 2 3 4 5 6 Moore, Keara B. (December 4, 2017). "WaterSense®: Water-Efficiency Label and Partnership Program". Congressional Research Service.
  4. 1 2 DeOreo, William B. (July 2020). "The Truth About Water Efficiency in the United States". Journal - American Water Works Association. 112 (7): 60–65. doi:10.1002/awwa.1537. S2CID   225616477.
  5. ↑ Vickers, Amy (August 1993). "The Energy Policy Act: Assessing Its Impact on Utilities". Journal - American Water Works Association. 85 (8): 56–62. doi:10.1002/j.1551-8833.1993.tb06041.x – via JSTOR Arts and Sciences X.
  6. ↑ Grumbles, Benjamin H. (May 2008). "WaterSense® Makes Good Sense". Journal - American Water Works Association. 100 (5): 34–36. doi:10.1002/j.1551-8833.2008.tb09619.x. S2CID   115672928.
  7. ↑ EPA (2011). "Revised Draft Specification for Weather-Based Irrigation Controllers."
  8. ↑ EPA (2011). "Pre-Rinse Spray Valves."
  9. ↑ EPA (2011). "Cation Exchange Water Softeners."
  10. 1 2 3 4 5 6 Humphreys, Elena H. (June 25, 2020). "WaterSense® Program: Congressional Authorization". Congressional Research Service. Retrieved December 14, 2020.
  11. ↑ US EPA, OW (2021-02-08). "WaterSense Specification for Homes". US EPA.
  12. ↑ Copeland, Claudia (December 15, 2016). "Water Use Efficiency Legislation in the 114th Congress". Congressional Research Service. Retrieved December 16, 2020.
  13. 1 2 Humphreys, Elena H. (March 28, 2019). "America's Water Infrastructure Act of 2018 (P.L. 115-270): Drinking Water Provisions". Congressional Research Service. Retrieved December 15, 2020.
  14. 1 2 US EPA, OW (2017-01-16). "Professional Certification". US EPA. Retrieved 2020-12-17.
  15. ↑ Tanner, Stephanie (February 2009). "Current Issue: How Does WaterSense® Select Products for Specification Development?". Journal - American Water Works Association. 101: 37–39. doi:10.1002/j.1551-8833.2009.tb09827.x. S2CID   106950232.
  16. ↑ EPA, US (2021-02-01). "WaterSense Specification for Homes". United States Environmental Protection Agency. Retrieved May 10, 2022.
  17. 1 2 EPA. "WaterSense Partners." Revised 2022-05-10.
  18. 1 2 Schein, Jonah; Chan, Peter; Chen, Yuting; Dunham, Camilla; Fuchs, Heidi; Letschert, Virginie; McNeil, Michael; Melody, Moya; Price, Sarah; Stratton, Hannah; Williams, Alison (2019). "Methodology for the National Water Savings Models– Indoor Residential and Commercial/Institutional Products, and Outdoor Residential Products". Water Science & Technology. 19 (3): 879–890. doi:10.2166/ws.2018.136. PMC   7786394 . PMID   33414698.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.