Electronic effect

Last updated

An electric effect influences the structure, reactivity, or properties of a molecule but is neither a traditional bond nor a steric effect. [1] In organic chemistry, the term stereoelectronic effect is also used to emphasize the relation between the electronic structure and the geometry (stereochemistry) of a molecule.

Contents

The term polar effect is sometimes used to refer to electronic effects, but also may have the more narrow definition of effects resulting from non-conjugated substituents. [2]

Types

Redistributive effects

Induction is the redistribution of electron density through a traditional sigma bonded structure according to the electronegativity of the atoms involved. The inductive effect drops across every sigma bond involved limiting its effect to only a few bonds.

Conjugation is a redistribution of electron density similar to induction but transmitted through interconnected pi-bonds. Conjugation is not only affected by electronegativity of the connected atoms but also affected by the position of electron lone pairs with respect to the pi-system. Electronic effects can be transmitted throughout a pi-system allowing their influence to extend further than induction.

In the context of electronic redistribution, an electron-withdrawing group (EWG) draws electrons away from a reaction center. When this center is an electron rich carbanion or an alkoxide anion, the presence of the electron-withdrawing substituent has a stabilizing effect. Similarly, an electron-releasing group (ERG) or electron-donating group (EDG) releases electrons into a reaction center and as such stabilizes electron deficient carbocations.

In electrophilic aromatic substitution and nucleophilic aromatic substitution, substituents are divided into activating groups and deactivating groups. Resonance electron-releasing groups are classed as activating, while Resonance electron-withdrawing groups are classed as deactivating.

Non-redistributive effects

Hyperconjugation is the stabilizing interaction that results from the interaction of the electrons in a sigma bond (usually C-H or C-C) with an adjacent empty (or partially filled) non-bonding p-orbital or antibonding π orbital or an antibonding sigma orbital to give an extended molecular orbital that increases the stability of the system. [3] Hyperconjugation can be used to explain phenomena such as the gauche effect and anomeric effect.

Orbital symmetry is important when dealing with orbitals that contain directional components like p and d. An example of such an effect is square planar low-spin d8 transition metal complexes. These complexes exist as square planar complexes due to the directionality of the metal center's d orbitals despite fewer steric congestion in a tetrahedral geometric structure. This is simple one example of many varied examples, including aspects of pericyclic reactions such as the Diels-Alder reaction, among others.

Electrostatic interactions include both attractive and repulsive forces associated with the build-up of charge in a molecule. Electrostatic interactions are generally too weak to be considered traditional bonds or are prevented from forming a traditional bond, possibly by a steric effect. A bond is usually defined as two atoms approaching closer than the sum of their Van der Waal radii. Hydrogen bonding borders on being an actual "bond" and an electrostatic interaction. While an attractive electrostatic interaction is considered a "bond" if it gets too strong, a repulsive electrostatic interaction is always an electrostatic effect regardless of strength. An example of a repulsive effect is a molecule contorting to minimize the coulombic interactions of atoms that hold like charges.

Electronic spin state at it simplest describes the number of unpaired electrons in a molecule. Most molecules including the proteins, carbohydrates, and lipids that make up the majority of life have no unpaired electrons even when charged. Such molecules are called singlet molecules, since their paired electrons have only one spin state. In contrast, dioxygen under ambient conditions has two unpaired electrons. Dioxygen is a triplet molecule, since the two unpaired electrons allow for three spin states. The reaction of a triplet molecule with a singlet molecule is spin-forbidden in quantum mechanics. This is the major reasons there is a very high reaction barrier for the extremely thermodynamically favorable reaction of singlet organic molecules with triplet oxygen. This kinetic barrier prevents life from bursting into flames at room temperature.

Electronic spin states are more complex for transition metals. To understand the reactivity of transition metals, it is essential to understand the concept of d electron configuration as well as high-spin and low-spin configuration. For example, a low-spin d8 transition metal complex is usually square planar substitutionally inert with no unpaired electrons. In contrast, a high-spin d8 transition metal complex is usually octahedral, substitutionally labile, with two unpaired electrons.

Jahn–Teller effect is the geometrical distortion of non-linear molecules under certain situations. Any non-linear molecule with a degenerate electronic ground state will undergo a geometrical distortion that removes that degeneracy. This has the effect of lowering the overall energy. The Jahn–Teller distortion is especially common in certain transition metal complexes; for example, copper(II) complexes with 9 d electrons.

Trans influence is the influence that a ligand in a square or octahedral complex has on the bond to the ligand trans to it. It is caused by electronic effects, and manifests itself as the lengthening of the trans bonds and as an effect on the overall energy of the complex.

Comparison with steric effects

The structure, properties, and reactivity of a molecule are dependent on straightforward bonding interactions including covalent bonds, ionic bonds, hydrogen bonds, and other forms of bonding. This bonding supplies a basic molecular skeleton that is modified by repulsive forces generally considered steric effects. Basic bonding and steric effects are at times insufficient to explain many structures, properties, and reactivity. Thus, steric effects are often contrasted and complemented by electronic effects, implying the influence of effects such as induction, conjunction, orbital symmetry, electrostatic interactions, and spin state. There are more esoteric electronic effects but these are among the most important when considering chemical structure and reactivity.

Special computational procedure was developed to separate steric and electronic effects of an arbitrary group in the molecule and to reveal their influence on structure and reactivity. [4]

Related Research Articles

<span class="mw-page-title-main">Coordination complex</span> Molecule or ion containing ligands datively bonded to a central metallic atom

A coordination complex is a chemical compound consisting of a central atom or ion, which is usually metallic and is called the coordination centre, and a surrounding array of bound molecules or ions, that are in turn known as ligands or complexing agents. Many metal-containing compounds, especially those that include transition metals, are coordination complexes.

<span class="mw-page-title-main">VSEPR theory</span> Model for predicting molecular geometry

Valence shell electron pair repulsion (VSEPR) theory is a model used in chemistry to predict the geometry of individual molecules from the number of electron pairs surrounding their central atoms. It is also named the Gillespie-Nyholm theory after its two main developers, Ronald Gillespie and Ronald Nyholm.

In organic chemistry, a carbene is a molecule containing a neutral carbon atom with a valence of two and two unshared valence electrons. The general formula is R−:C−R' or R=C: where the R represents substituents or hydrogen atoms.

The 1,3-dipolar cycloaddition is a chemical reaction between a 1,3-dipole and a dipolarophile to form a five-membered ring. The earliest 1,3-dipolar cycloadditions were described in the late 19th century to the early 20th century, following the discovery of 1,3-dipoles. Mechanistic investigation and synthetic application were established in the 1960s, primarily through the work of Rolf Huisgen. Hence, the reaction is sometimes referred to as the Huisgen cycloaddition. 1,3-dipolar cycloaddition is an important route to the regio- and stereoselective synthesis of five-membered heterocycles and their ring-opened acyclic derivatives. The dipolarophile is typically an alkene or alkyne, but can be other pi systems. When the dipolarophile is an alkyne, aromatic rings are generally produced.

<span class="mw-page-title-main">Conformational isomerism</span> Different molecular structures formed only by rotation about single bonds

In chemistry, conformational isomerism is a form of stereoisomerism in which the isomers can be interconverted just by rotations about formally single bonds. While any two arrangements of atoms in a molecule that differ by rotation about single bonds can be referred to as different conformations, conformations that correspond to local minima on the potential energy surface are specifically called conformational isomers or conformers. Conformations that correspond to local maxima on the energy surface are the transition states between the local-minimum conformational isomers. Rotations about single bonds involve overcoming a rotational energy barrier to interconvert one conformer to another. If the energy barrier is low, there is free rotation and a sample of the compound exists as a rapidly equilibrating mixture of multiple conformers; if the energy barrier is high enough then there is restricted rotation, a molecule may exist for a relatively long time period as a stable rotational isomer or rotamer. When the time scale for interconversion is long enough for isolation of individual rotamers, the isomers are termed atropisomers. The ring-flip of substituted cyclohexanes constitutes another common form of conformational isomerism.

<span class="mw-page-title-main">Hyperconjugation</span> Concept in organic chemistry

In organic chemistry, hyperconjugation refers to the delocalization of electrons with the participation of bonds of primarily σ-character. Usually, hyperconjugation involves the interaction of the electrons in a sigma (σ) orbital with an adjacent unpopulated non-bonding p or antibonding σ* or π* orbitals to give a pair of extended molecular orbitals. However, sometimes, low-lying antibonding σ* orbitals may also interact with filled orbitals of lone pair character (n) in what is termed negative hyperconjugation. Increased electron delocalization associated with hyperconjugation increases the stability of the system. In particular, the new orbital with bonding character is stabilized, resulting in an overall stabilization of the molecule. Only electrons in bonds that are in the β position can have this sort of direct stabilizing effect — donating from a sigma bond on an atom to an orbital in another atom directly attached to it. However, extended versions of hyperconjugation can be important as well. The Baker–Nathan effect, sometimes used synonymously for hyperconjugation, is a specific application of it to certain chemical reactions or types of structures.

<span class="mw-page-title-main">Triplet oxygen</span> Triplet state of the dioxygen molecule

Triplet oxygen, 3O2, refers to the S = 1 electronic ground state of molecular oxygen (dioxygen). Molecules of triplet oxygen contain two unpaired electrons, making triplet oxygen an unusual example of a stable and commonly encountered diradical: it is more stable as a triplet than a singlet. According to molecular orbital theory, the electron configuration of triplet oxygen has two electrons occupying two π molecular orbitals (MOs) of equal energy (that is, degenerate MOs). In accordance with Hund's rules, they remain unpaired and spin-parallel, which accounts for the paramagnetism of molecular oxygen. These half-filled orbitals are antibonding in character, reducing the overall bond order of the molecule to 2 from the maximum value of 3 that would occur when these antibonding orbitals remain fully unoccupied, as in dinitrogen. The molecular term symbol for triplet oxygen is 3Σ
g
.

<span class="mw-page-title-main">Anomeric effect</span> Tendency of some substituents on a cyclohexane ring to prefer axial orientation

In organic chemistry, the anomeric effect or Edward-Lemieux effect is a stereoelectronic effect that describes the tendency of heteroatomic substituents adjacent to a heteroatom within a cyclohexane ring to prefer the axial orientation instead of the less-hindered equatorial orientation that would be expected from steric considerations. This effect was originally observed in pyranose rings by J. T. Edward in 1955 when studying carbohydrate chemistry.

In chemistry, a diradical is a molecular species with two electrons occupying molecular orbitals (MOs) which are degenerate. The term "diradical" is mainly used to describe organic compounds, where most diradicals are extremely reactive and in fact rarely isolated. Diradicals are even-electron molecules but have one fewer bond than the number permitted by the octet rule.

<span class="mw-page-title-main">Asymmetric induction</span> Preferential formation of one chiral isomer over another in a chemical reaction

Asymmetric induction describes the preferential formation in a chemical reaction of one enantiomer or diastereoisomer over the other as a result of the influence of a chiral feature present in the substrate, reagent, catalyst or environment. Asymmetric induction is a key element in asymmetric synthesis.

The 18-electron rule is a chemical rule of thumb used primarily for predicting and rationalizing formulas for stable transition metal complexes, especially organometallic compounds. The rule is based on the fact that the valence orbitals in the electron configuration of transition metals consist of five (n−1)d orbitals, one ns orbital, and three np orbitals, where n is the principal quantum number. These orbitals can collectively accommodate 18 electrons as either bonding or non-bonding electron pairs. This means that the combination of these nine atomic orbitals with ligand orbitals creates nine molecular orbitals that are either metal-ligand bonding or non-bonding. When a metal complex has 18 valence electrons, it is said to have achieved the same electron configuration as the noble gas in the period, lending stability to the complex. Transition metal complexes that deviate from the rule are often interesting or useful because they tend to be more reactive. The rule is not helpful for complexes of metals that are not transition metals. The rule was first proposed by American chemist Irving Langmuir in 1921.

<span class="mw-page-title-main">Bürgi–Dunitz angle</span>

The Bürgi–Dunitz angle is one of two angles that fully define the geometry of "attack" of a nucleophile on a trigonal unsaturated center in a molecule, originally the carbonyl center in an organic ketone, but now extending to aldehyde, ester, and amide carbonyls, and to alkenes (olefins) as well. The angle was named after crystallographers Hans-Beat Bürgi and Jack D. Dunitz, its first senior investigators.

Physical organic chemistry, a term coined by Louis Hammett in 1940, refers to a discipline of organic chemistry that focuses on the relationship between chemical structures and reactivity, in particular, applying experimental tools of physical chemistry to the study of organic molecules. Specific focal points of study include the rates of organic reactions, the relative chemical stabilities of the starting materials, reactive intermediates, transition states, and products of chemical reactions, and non-covalent aspects of solvation and molecular interactions that influence chemical reactivity. Such studies provide theoretical and practical frameworks to understand how changes in structure in solution or solid-state contexts impact reaction mechanism and rate for each organic reaction of interest.

<span class="mw-page-title-main">Bite angle</span>

In coordination chemistry, the bite angle is the angle on a central atom between two bonds to a bidentate ligand. This ligand–metal–ligand geometric parameter is used to classify chelating ligands, including those in organometallic complexes. It is most often discussed in terms of catalysis, as changes in bite angle can affect not just the activity and selectivity of a catalytic reaction but even allow alternative reaction pathways to become accessible.

<span class="mw-page-title-main">Flippin–Lodge angle</span>

The Flippin–Lodge angle is one of two angles used by organic and biological chemists studying the relationship between a molecule's chemical structure and ways that it reacts, for reactions involving "attack" of an electron-rich reacting species, the nucleophile, on an electron-poor reacting species, the electrophile. Specifically, the angles—the Bürgi–Dunitz, , and the Flippin–Lodge, —describe the "trajectory" or "angle of attack" of the nucleophile as it approaches the electrophile, in particular when the latter is planar in shape. This is called a nucleophilic addition reaction and it plays a central role in the biological chemistry taking place in many biosyntheses in nature, and is a central "tool" in the reaction toolkit of modern organic chemistry, e.g., to construct new molecules such as pharmaceuticals. Theory and use of these angles falls into the areas of synthetic and physical organic chemistry, which deals with chemical structure and reaction mechanism, and within a sub-specialty called structure correlation.

<span class="mw-page-title-main">Radical (chemistry)</span> Atom, molecule, or ion that has an unpaired valence electron; typically highly reactive

In chemistry, a radical, also known as a free radical, is an atom, molecule, or ion that has at least one unpaired valence electron. With some exceptions, these unpaired electrons make radicals highly chemically reactive. Many radicals spontaneously dimerize. Most organic radicals have short lifetimes.

In chemistry, π-effects or π-interactions are a type of non-covalent interaction that involves π systems. Just like in an electrostatic interaction where a region of negative charge interacts with a positive charge, the electron-rich π system can interact with a metal, an anion, another molecule and even another π system. Non-covalent interactions involving π systems are pivotal to biological events such as protein-ligand recognition.

<span class="mw-page-title-main">Germylene</span> Class of germanium (II) compounds

Germylenes are a class of germanium(II) compounds with the general formula :GeR2. They are heavier carbene analogs. However, unlike carbenes, whose ground state can be either singlet or triplet depending on the substituents, germylenes have exclusively a singlet ground state. Unprotected carbene analogs, including germylenes, has a dimerization nature. Free germylenes can be isolated under the stabilization of steric hindrance or electron donation. The synthesis of first stable free dialkyl germylene was reported by Jutzi, et al in 1991.

<span class="mw-page-title-main">Stereoelectronic effect</span> Affect on molecular properties due to spatial arrangement of electron orbitals

In chemistry, primarily organic and computational chemistry, a stereoelectronic effect is an effect on molecular geometry, reactivity, or physical properties due to spatial relationships in the molecules' electronic structure, in particular the interaction between atomic and/or molecular orbitals. Phrased differently, stereoelectronic effects can also be defined as the geometric constraints placed on the ground and/or transition states of molecules that arise from considerations of orbital overlap. Thus, a stereoelectronic effect explains a particular molecular property or reactivity by invoking stabilizing or destabilizing interactions that depend on the relative orientations of electrons in space.

<span class="mw-page-title-main">Diphosphadiboretanes</span> Chemical compound

1,3-Diphospha-2,4-diboretanes, or B2P2, is a class of 4-member cyclic compounds of alternating boron and phosphorus atoms. They are often found as dimers during the synthesis of boraphosphenes (RB=PR'). Compounds can exhibit localized singlet diradical character (diradicaloid) between the boron atoms in the solution and solid state.

References

  1. G. L. Miessler and D. A. Tarr “Inorganic Chemistry” 3rd Ed, Pearson/Prentice Hall publisher, ISBN   0-13-035471-6.
  2. "polar effect". IUPAC Gold Book. IUPAC. Retrieved 2024-02-06.
  3. Organic chemistry John McMurry 2nd edition ISBN   0-534-07968-7
  4. Ananikov, V. P.; Musaev, D. G.; Morokuma, K. (2007). "Critical Effect of Phosphane Ligands on the Mechanism of Carbon–Carbon Bond Formation Involving Palladium(II) Complexes: A Theoretical Investigation of Reductive Elimination from Square-Planar and T-Shaped Species". Eur. J. Inorg. Chem. 2007 (34): 5390–5399. doi:10.1002/ejic.200700850.