Entreprenant (1965)

Last updated
Mp11.JPG
Entreprenant in Dunkirk Port Museum
History
Flag of France.svgFrance
Name:Entreprenant
Owner:
  • previously Abeilles International
  • Dunkirk Port Museum
Builder: Ziegler Frères, Dunkirk
Homeport: Dunkirk, France
Identification:
Fate: Museum ship in Dunkirk
Status: Undergoing restoration
General characteristics
Type: Port Tug
Tonnage: 207  GT
Length: 32.30 m (106.0 ft)
Beam: 8.0 m (26.2 ft)
Draught: 4.5 m (15 ft)
Speed: 13 knots (24 km/h; 15 mph)
Crew: 5
Notes: Bollard pull: 25.0 tons

The Entreprenant was a port tug built in 1965. She is now undergoing restoration as a floating exhibit in Dunkirk Port Museum.

History

Entreprenant and her sister, Audacieux were built in 1965 by Ziegler Frères, Dunkirk.

After more than 40 years service, mainly in Dunkirk, Entreprenant was decommissioned and given to the Port Museum. She will be restored and then opened to visitors as part of the floating museum. [3]

Related Research Articles

Steamship William G. Mather Maritime Museum Museum ship in Cleveland, Ohio

The Steamship William G. Mather(Official Number 224850) is a retired Great Lakes bulk freighter now restored as a museum ship in Cleveland, Ohio, one of five in the Great Lakes region. She transported cargo such as ore, coal, stone, and grain to ports throughout the Great Lakes, and was nicknamed "The Ship That Built Cleveland" because Cleveland's steel mills were a frequent destination.

Hulk (ship type) Ship that is afloat, but not seagoing

A hulk is a ship that is afloat, but incapable of going to sea. Although sometimes used to describe a ship that has been launched but not completed, the term most often refers to an old ship that has had its rigging or internal equipment removed, retaining only its buoyant qualities. The word hulk is also used as a verb: a ship is "hulked" to convert it to a hulk. The verb was also applied to crews of Royal Navy ships in dock, who were sent to the receiving ship for accommodation, or "hulked". Hulks have a variety of uses such as housing, prisons, salvage pontoons, gambling sites, naval training, or cargo storage.

<i>Empire Sandy</i>

Empire Sandy is a tall ship providing chartered tours for the public from Toronto, Canada. She was built as an Englishman/ Larch Deep Sea-class tugboat for war service by the British government in 1943. After the end of World War II she was renamed Ashford and then Chris M before reverting to the original name of Empire Sandy and being converted to a schooner.

GMV <i>Aramoana</i>

GMV Aramoana was a roll-on roll-off train ferry operating across Cook Strait between 1962 and 1983.

MS <i>Normac</i>

Normac is a floating restaurant boat that was launched as a fire tug, named the James R. Elliot. She was built at the Jenks Shipbuilding Company in Port Huron, Michigan, in 1902.

The Little Ships of Dunkirk were about 850 private boats that sailed from Ramsgate in England to Dunkirk in northern France between 26 May and 4 June 1940 as part of Operation Dynamo, helping to rescue more than 336,000 British, French, and other Allied soldiers who were trapped on the beaches at Dunkirk during the Second World War.

<i>Sundowner</i> (yacht)

Sundowner is a motor yacht formerly owned by Charles Lightoller, the second officer of RMS Titanic and the most senior officer to survive her sinking in 1912.

ST <i>Cervia</i>

ST Cervia was built in 1946 as a seagoing tug for use as a fleet auxiliary by Alexandra Hall & Company Ltd of Aberdeen, Scotland. Today she is a floating Museum still undergoing restoration in Ramsgate, Kent.

U.S. Army ST-488 is an 86 ft (26 m) harbor tugboat, design 327-A, of the numerical series 885-490 built by J.K. Welding & Co shipyards in Brooklyn, New York in 1944. The Army's ST small tugs ranged generally from about 55 ft (17 m) to 92 ft (28 m) in length as opposed to the larger seagoing LT tugs. ST-488 was delivered May 1944 and served in the United States Army from October 1944 to 1946 in the French port of Le Havre and on the floating docks of the U.S. Mulberry harbour of Arromanches in Normandy. After a civilian career at the port of Le Havre until the late 1970s, saved from wrecking by volunteers, she became a museum ship in 1994, part of Musée maritime of Le Havre and was classified a Monument historique in 1997.

SS Alacrity was a tug built in Graville, France in 1893 as Jean Bart and was operated by the Dunkirk Chamber of Commerce. She was sold in 1902 to Howard Smith and renamed Alacrity for tug service in Port Phillip, Australia. During the First World War, she was purchased by the Royal Australian Navy in 1917 for use as a patrol vessel, inspection vessel, and minesweeper based at Fremantle. She was never commissioned. After being sold in 1925, she was slated for breaking up and was moored in Jervoise Bay, Western Australia, until a fierce gale in Cockburn Sound wrecked her in 1931.

<i>Portland</i> (1947 tugboat)

Portland is a sternwheel steamboat built in 1947 for the Port of Portland, Oregon, in the United States.

Entreprenant or Entreprenante may refer to:

<i>G.W. Rogers</i> tugboat

G.W. Rogers was a tugboat active on the Great Lakes.

Erg was a vessel built and owned by Halifax Steamship Ltd. in 1915. She was used to ferry workers across the harbour to vessels under repair during the Second World War. Erg was sunk in the Halifax Harbour three times and is currently located in the Bedford Basin.

HMS <i>Advantage</i> (W 133) Favourite-class tugboat of the Royal Navy

HMS Advantage was a Favourite-class tugboat of the Royal Navy during the Second World War. Built in the United States, she was transferred to the Royal Navy under Lend-Lease. Advantage served until the end of the war with the Royal Navy and was returned to the United States postwar. Sold to a Chinese merchant shipping company, she served successively as 109, Ming 309, and Kaoshiung until her 1965 scrapping.

<i>Yelta</i> (tugboat)

Yelta is a steam tug which operated in the Australian state of South Australia from 1949 to 1976 within both the Port River and the waters of Gulf St Vincent immediately adjoining the river's mouth. After being laid up for about nine years, she was purchased in 1985 by the Government of South Australia for addition to the collection of the South Australian Maritime Museum as a museum ship. As of 1985, she was considered to be the only remaining steam-powered tug operating within Australian waters.

Type V ship

The Type V ship is a United States Maritime Commission (MARCOM) designation for World War II tugboats. Type V was used in World War II, Korean War and the Vietnam War. Type V ships were used to move ships and barges. Type V tugboats were made of either steel or wood hulls. There were four types of tugboats ordered for World War II. The largest type V design was the sea worthy 186-foot (57 m) long steel hull, V4-M-A1. The V4-M-A1 design was used by a number of manufacturers; a total of 49 were built. A smaller steel hull tugboat was the 94-foot (29 m) V2-ME-A1; 26 were built. The largest wooden hull was the 148-foot (45 m) V3-S-AH2, of which 14 were built. The smaller wooden hull was the 58-foot (18 m) V2-M-AL1, which 35 were built. Most V2-M-AL1 tugboats were sent to England for the war efforts under the lend-lease act. The Type V tugs served across the globe during Work War II including: Pacific War, European theatre and in the United State. SS Farallon and other Type V tugs were used to help built Normandy ports, including Mulberry harbour, on D-Day, June 6, 1944 and made nine round trips to Normandy to deliver Phoenix breakwaters.

USS <i>AFDM-2</i> large auxiliary floating drydock of the US Navy

USS AFDM-2 (YFD-4) is an AFDM-3-class medium auxiliary floating drydock built in Mobile, Alabama by the Alabama Drydock and Shipbuilding Company for the U.S. Navy. Originally named USS YFD-4, Yard Floating Dock-4, she operated by Todd Shipyards at New Orleans, Louisiana for the repair of US ships during World War II. YFD-4 was renamed an Auxiliary Floating Dock Medium AFDM-2 in 1945 after the war. USS AFDM-2 was 37 feet (11.3 m) tall, 116 feet (35.4 m) wide, length of 614 feet (187.1 m), and has a displacement of 6,360 tons. AFDM-2 could lift capacity 9,000 tons and had two service cranes to lift material and parts for removing damage parts and the installation of new parts. The floating drydock can repair ships up to a beam of 90 feet (27.4 m), as she is 90 feet wide between the wing walls. Ballast pontoons tanks are flooded with water to submerge or pumped dry to raise the ship. Submerged she can load a ship with a draft up to 20 feet (6.1 m).

References

  1. "Entreprenant - 6519338 - Tug". Maritime Connector. Retrieved 22 July 2012.
  2. "Entreprenant - IMO 6519338". Ship Spotting. Retrieved 22 July 2012.
  3. "Tug Entreprenant". MarMuCommerce. Retrieved 22 July 2012.