 | This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations .(December 2014) |
| FS class D.445 | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 FS D 445 1125 at Venezia Santa Lucia railway station | |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
The Class D.445 is a class of diesel locomotives used by the Italian Ferrovie dello Stato (FS) railway company and by Trenord. 150 units were built between 1974 and 1988, divided into three series.
The D.445 represented an evolution of the FS Class D.443 locomotive, [1] maintaining the predecessor's reliability and operational capabilities. At the beginning of the 1970s FS, during a plan aimed at the expansion and modernization of current service, designed a new version of an unified diesel locomotive which could also resolve the issue of supplying power to heat carriages in an efficient way through a high voltage 2,800 V [2] head end power supply (REC) fed by a secondary generator. Previous diesel locomotives were not provided with this and so required the use of a generator wagon (Carro Riscaldo), leading to increased weight. The first series of locomotives, introduced from 1974, were built with curved front windscreens which would be later replaced by cheaper and sturdier flat ones.
In 1979 a second series was ordered, fitted with the Italian standard 78 wire control equipment for use with driving carriages. [2] At the end of the 1980s the whole group consisted of 150 units which allowed the retirement of the then old D.341 and D.342 locomotives.
The locomotive follows the general unified characteristics of other engines about the chassis and mechanical design. The biggest differences are inside the electrical part: the two MTSC 039/19 DC motors (permanently in parallel) are fed by a three-phase AC generator (in place of a DC one as previous locomotives) through a Graetz Bridge.
A high tension secondary DC generator provides a 300 kW (400 hp)/2750 V output, able to supply enough power for 7/10 coaches depending on the type of climatising equipment installed.
The prime mover is a diesel engine is produced by FIAT, type A210-12 supercharged with 12 90° “V” cylinders with a displacement of 95.7 L (5,840 cu in) that produces 1,560 kW (2,090 hp ) at 1500 rpm. The engine is cooled by a forced circulation of cooling fluid through radiators with two hydraulically driven fans.
The alternator is controlled by an electronic PWM control unit which is commanded by a 13 step regulator.
The bogies are a monomotor design with a 'dancing ring' coupling, [3] giving a B′B′ wheel arrangement. They are suspended by a flexicoil arrangement, with additional traction rods. [3]
1st series units originally had curved windscreens, replaced in the 1980s by flat glas, later used on 2nd and 3rd series units. Their maximum allowed speed is 130 km/h (81 mph). Like most FS stock, some D.445 have received the XMPR color scheme (white, green, blue).
The first series consists of 35 units (Numbered from 1001 to 1035), in green-over-Isabella brown livery. Equipped with three headlights, weren't provided with remote command system, applied starting from October 1996. They still had curved frontal glass panes.
The second series has 20 units (Numbered from 1036 to 1055), in the Navetta orange/purple livery used by push-pull trains. The main difference between 1st and 2nd series units was the addition of remote control equipment for use with control cars.
The third series has 95 units (Numbered from 1056 to 1150), in the same push-pull livery as the 2nd series. These units have five lights on each cab (three headlights and two red tail lights). Like 2nd series, they can be controlled by a control carriage.
A diesel locomotive is a type of railway locomotive in which the prime mover is a diesel engine. Several types of diesel locomotives have been developed, differing mainly in the means by which mechanical power is conveyed to the driving wheels.
The British Railways Class D3/7 is a class of 0-6-0 diesel electric shunting locomotives built as LMS Nos. 7080–7119. The class were built from May 1939 through to July 1942 by the London, Midland and Scottish Railway at their Derby Works using a diesel electric transmission supplied by English Electric.
The Iarnród Éireann (IÉ) / Northern Ireland Railways 201 Class locomotives are the newest and most powerful diesel locomotives operating in Ireland and were built between 1994 and 1995 by General Motors Diesel. They are model type JT42HCW, fitted with an EMD 12-710G3B engine of 3,200 hp (2,400 kW), weigh 108.862 tonnes and have a maximum speed of 164 km/h (102 mph). A freight version, the EMD Series 66, with the same engine, is used on privately operated European mainline freight duties.
The Union Pacific Railroad's M-10003, M-10004, M-10005, and M-10006 were four identical streamlined 2-car power car diesel-electric train sets delivered in May, June, and July 1936 from Pullman-Standard, with prime movers from the Winton Engine Corporation of General Motors and General Electric generators, control equipment and traction motors. One was for the City of San Francisco, two were for the City of Denver, and one was a spare set intended for both routes. In 1939, M-10004 was split and converted into additional boosters for the other sets, now renumbered CD-05, CD-06, and CD-07, all running on the City of Denver. The M-10001 power car became the other third booster. In this form, the three power sets ran until they were replaced by E8 locomotives in 1953, at which point they were scrapped.
EMD F-units are a line of diesel-electric locomotives produced between November 1939 and November 1960 by General Motors Electro-Motive Division and General Motors-Diesel Division. Final assembly for all F-units was at the GM-EMD plant at La Grange, Illinois, and the GMDD plant in London, Ontario. They were sold to railroads throughout the United States, Canada and Mexico, and a few were exported to Saudi Arabia. The term F-unit refers to the model numbers given to each successive type, all of which began with the letter F. The F originally meant "fourteen", as in 1,400 horsepower (1,000 kW), not "freight". Longer EMD E-units for passenger service had twin 900-horsepower (670 kW) diesel engines. The E meant "eighteen" as in 1,800 horsepower (1,300 kW). Similarly, for early model EMD switchers, S meant "six hundred" and N meant "nine hundred horsepower".
In rail transport, head-end power (HEP), also known as electric train supply (ETS), is the electrical power distribution system on a passenger train. The power source, usually a locomotive at the front or 'head' of a train, provides the electricity used for heating, lighting, electrical and other 'hotel' needs. The maritime equivalent is hotel electric power. A successful attempt by the London, Brighton and South Coast Railway in October 1881 to light the passenger cars on the London to Brighton route heralded the beginning of using electricity to light trains in the world.
Ferrovie dello Stato Italiane S.p.A., previously only Ferrovie dello Stato S.p.A., in acronym FS, is Italy's national state-owned railway holding company that manages transport, infrastructure, real estate services and other services in Italy and other European countries.
LMS No. 10000 and 10001 were the first mainline diesel locomotives built in Great Britain. They were built in association with English Electric by the London, Midland and Scottish Railway at its Derby Works, using an English Electric 1,600 hp diesel engine, generator and electrics.
A control car, cab car, control trailer, or driving trailer is a non-powered rail vehicle from which a train can be operated. As dedicated vehicles or regular passenger cars, they have one or two driver compartments with all the controls and gauges required to remotely operate the locomotive, including exterior locomotive equipment such as horns, bells, ploughs, and lights. They also have communications and safety systems such as GSM-R or European Train Control System (ETCS). Control cars enable push-pull operation when located on the end of a train opposite its locomotive by allowing the train to reverse direction at a terminus without moving the locomotive or turning the train around.
The FS E.444 is a class of Italian railways electric locomotives. They were introduced in the course of the 1960s until 1975. Starting from 1989, all E.444s were upgraded as E.444R.
The FS E.632 and E.633 are two classes of Italian railways electric locomotives. They were introduced in the course of the 1980s.
The FS E.625 and E.626 are two classes of Italian electric locomotives produced for the Ferrovie dello Stato. They were introduced in the course of the 1920s and remained in service until the 1990s. The E.626 was the first locomotive fed by 3,000 V DC overhead line in Italy.
The FS Class D.341 is a class of diesel-electric locomotive used in Italy, introduced in the 1950s and still in service. Most of the remaining units are in service with La Ferroviaria Italiana (LFI).
The FS Class D.443 is a class of diesel-electric locomotive used in Italy, introduced in the late 1960s and still in service.
The FS Class D.345 is a class of diesel-electric locomotive used in Italy, introduced in the 1970s and still in service.
The Renfe Class 354 was a series of eight diesel hydraulic locomotives manufactured by Krauss-Maffei in Germany specifically to pull Talgo pendular coaches which were introduced shortly before the acquisition of these machines.
The Brenner Railway is a major line connecting the Austrian and Italian railways from Innsbruck to Verona, climbing up the Wipptal, passing over the Brenner Pass, descending down the Eisacktal to Bolzano/Bozen, then further down the Adige Valley to Rovereto/Rofreit, and along the section of the Adige Valley, called in Italian the “Vallagarina”, to Verona. This railway line is part of the Line 1 of Trans-European Transport Networks (TEN-T). It is considered a "fundamental" line by the state railways Ferrovie dello Stato (FS).
The Ferrovie dello Stato Italiane Class 600, formerly Rete Adriatica Class 380 and Società per le Strade Ferrate Meridionali Class 380, is a 2-6-0 'Mogul' steam locomotive; it is considered by some as the first Italian modern steam locomotive.
The FS Class E.470 was an electric locomotive class of the state-owned Italian railway Ferrovie dello Stato. It was used on the Italian three-phase test line from Rome-Sulmona especially in express train service. After the end of the trial operation in 1945, the locomotives were scrapped, and no locomotive of the class has been preserved.
FS Class E.333 was a class of electric locomotives of the Ferrovie dello Stato (FS), powered by three-phase alternating current, which were in service from 1923 to 1968. They were designed by Kálmán Kandó for hauling fast passenger trains. Having the same electrical equipment as the FS Class E.552 locomotives, they presented the same defects and had to be modified. After modification, they were able to carry out the services for which they were designed.
