FS Class ETR 480

Last updated
ETR 480 / ETR 485
ETR 480 Alta Velocit.JPEG
ETR 480
In service1997-
ManufacturerFiat Ferroviaria / Alstom
Built atSavigliano (Cuneo)
Family namePendolino
Constructed1997-1998 (ETR 480)
Refurbished2004-2009 (ETR 485)
Number under construction1 (Rebuilding damaged ETR 485 - 36)
Number built15 trainsets
Number in service14 (ETR 485 - 36 seriously damaged in accident on 24 September 2012, expected to return in service as it is being tested)
Formation9 cars trainset: 3 1st class cars, 1 bar-restaurant car, 5 2nd class cars.
CapacityETR 480: 480 seats - 139 1st class, 341 2nd class; ETR 485: 489 seats -146 1st class, 343 2nd class. 2 wheelchair + 23 restaurant. [1]
OperatorsTrenitalia / Trainose (from 2019)
Lines servedItaly: Frecciargento services: Napoli C. - Roma Termini - Firenze C. M. - Bologna C. - Verona P. N. - Bolzano / - Brescia, Roma Termini - Firenze C. M. - Pisa C. - La Spezia - Genova P. P., Roma Termini - Caserta - Benevento - Foggia - Bari - Brindisi - Lecce, Roma Termini - Napoli Afragola - Salerno - Paola - Lamezia Terme Centrale - Rosarno - Villa San Giovanni - Reggio Calabria Centrale.
Specifications
Train length236.6 m (776 ft 3 in)
Maximum speed250 km/h (155 mph)
Weight409  t (403 long tons; 451 short tons)
Power output6 MW (8,000 hp)
Electric system(s) ETR 480: 3 kV DC Overhead catenary  ; ETR 485: 3 kV DC, 25 kV 50 Hz AC
Current collector(s) Pantograph
Track gauge 1,435 mm (4 ft 8+12 in) standard gauge

The ETR 480 is a tilting Electric Multiple Unit built by Fiat Ferroviaria (now Alstom Ferroviaria) since 1993, It is also known as Pendolino. It was developed from the first new-generation Pendolino, the ETR 460. The main difference between ETR 460, ETR 470 and ETR 480 is that the 460 run only on 3 kV DC, the 470 on both 3 kV DC and 15 kV AC, and the 480 on both 3 kV DC and 25 kV 50 Hz AC.

Contents

FS Class 485

The ETR 480 was originally built without real 25 kV AC electrical equipment. This equipment is now installed on all the sets and the trains that have been converted are then re-measured on ETR 485.

Export

One of these units has been sent for testing on the Greek railway (TrainOSE), on the high speed line between Thessaloniki and Katerini. In August 2018, the specified number of 485,031 was transferred from Italy to Greece for test routes. This was the beginning for converting some ETR 470 for use by TrainOSE.

Technical information

See also

Related Research Articles

<span class="mw-page-title-main">Tilting train</span> Type of train that can tilt in curves

A tilting train is a train that has a mechanism enabling increased speed on regular rail tracks. As a train rounds a curve at speed, objects inside the train experience centrifugal force. This can cause packages to slide about or seated passengers to feel squashed by the outboard armrest, and standing passengers to lose their balance, or in such excessive speeds, could even cause the train to derail. Tilting trains are designed to counteract this by tilting the carriages towards the inside of the curve, thus compensating for the g-force. The train may be constructed such that inertial forces cause the tilting, or it may have a computer-controlled powered mechanism.

<span class="mw-page-title-main">Pendolino</span> Italian family of tilting trains

Pendolino is an Italian family of high-speed tilting trains used in Italy, Spain, Germany, Poland, Portugal, Slovenia, Finland, the Czech Republic, Slovakia, the UK, the US, Switzerland, China, and Greece. It was also used in Russia from December 12, 2010 until March 26, 2022. Based on the design of the Italian ETR 401, it was further developed and manufactured by Fiat Ferroviaria, which was taken over by Alstom in 2000.

<span class="mw-page-title-main">SŽ series 310</span>

SŽ series 310 is a high-speed tilting EMU used on the InterCitySlovenija premium train service in Slovenia, operated by Slovenske železnice since September 24, 2000. It is based on the Italian ETR 460 commonly known as Pendolino. The train is capable of reaching a maximum speed of 200 km/h. The train is electric single system - 3 kV DC.

<span class="mw-page-title-main">Cisalpino</span> Swiss-Italian railway company

Cisalpino AG was a railway company, referred to as CIS in timetables, operating international trains between Switzerland and Italy connecting Basel, Schaffhausen, Zürich, Geneva, Milan, Venice, Trieste, Livorno, and Florence. The company has its legal headquarters in Muri bei Bern (BE), Switzerland, and is jointly owned by the Swiss Federal Railways and Trenitalia.

<span class="mw-page-title-main">Eurostar Italia</span> Brand of high-speed rail services

Eurostar Italia was the name given to high-speed trains operated by Trenitalia in Italy. The brand was discontinued and replaced with Le Frecce in December 2012.

<span class="mw-page-title-main">Ferrovie dello Stato Italiane</span> State-owned railway holding company of Italy

Ferrovie dello Stato Italiane S.p.A. is Italy's national state-owned railway holding company that manages transport, infrastructure, real estate services and other services in Italy and other European countries.

<span class="mw-page-title-main">Alfa Pendular</span> HSR system in Portugal

Alfa Pendular is the name of the flagship Pendolino high-speed tilting train of Portuguese state railway company CP. It connects the cities of Guimarães, Braga, Porto, Aveiro, Coimbra, Santarém, Lisbon, Albufeira and Faro, among others at speeds of up to 220 km/h.

<span class="mw-page-title-main">FS Class ETR 450</span>

ETR 450 was the first series Italian tilting train.

<span class="mw-page-title-main">New Pendolino</span> Italian high-speed tilting train

The New Pendolino is a class of high-speed tilting trains built by Alstom Ferroviaria for Trenitalia and Cisalpino.

ETR is a series of Italian high-speed trains.

<span class="mw-page-title-main">Alstom Ferroviaria</span> Former rail division of Fiat of Italy

Alstom Ferroviaria S.p.A., formerly known as Fiat Ferroviaria S.p.A., is the Italian division of Alstom. Fiat Ferroviaria S.p.A. was the rail division of automobile manufacturer Fiat. It was founded in 1880 as Società Nazionale Officine di Savigliano. Fiat Ferroviaria began building locomotives in the 1930s. It became part of Fiat in 1970. Fiat Ferroviaria acquired the rail business of SIG of Switzerland in 1995, forming the subsidiary Fiat-Sig.

<span class="mw-page-title-main">High-speed rail in Italy</span> Overview of the high-speed rail system in Italy

High-speed rail in Italy consists of two lines connecting most of the country's major cities. The first line connects Turin to Salerno via Milan, Bologna, Florence, Rome and Naples, the second runs from Turin to Venice via Milan and Verona, and is under construction in parts. Trains are operated with a top speed of 300 km/h (190 mph).

<span class="mw-page-title-main">FS Class ETR 470</span> 1990s electric multiple unit

ETR 470 is a high-speed tilting electric multiple unit, which is now only operated by the Greek company, Hellenic Train. Introduced in September 1996, nine units were built for the Italo-Swiss firm Cisalpino. They were made by Fiat Ferroviaria, and could tilt up to 8°. Today, there are five trains in Greece.

<span class="mw-page-title-main">ČD Class 680</span>

ČD Class 680 are EMUs operating in the Czech Republic, using tilting Pendolino technology intended for the SuperCity train service. Built by Alstom, they were largely based on the nine-car ETR 470. While testing from Břeclav to Brno on November 18, 2004, the Pendolino reached a speed of 237 km/h (147 mph) and created a new Czech railway speed record. The units are able to operate on 25 kV 50 Hz AC, 15 kV  16.7 Hz AC and 3,000 V DC.

<span class="mw-page-title-main">Hellenic Train</span> Train operator in Greece

Hellenic Train S.A., formerly TrainOSE S.A., is a private railway company in Greece which operates passenger and freight trains on OSE lines. Hellenic Train employs train crews, operators and manages most of the rail services throughout the Greek railway network, leasing rolling stock owned by GAIAOSE except for ETR 470 trains.

<span class="mw-page-title-main">Renfe Class 490</span>

The Renfe Class 490, also known as the ETR 490, is an electric multiple unit constructed by Alstom and Fiat Ferroviaria and operated by Spanish rail company Renfe on its Alaris long-distance services. Since the introduction of the Alaris service, only ETR 490 units have been used for this service. Therefore, these trainsets are often known as Alaris themselves. The units were the first actively tilting units to go into regular service in Spain.

<span class="mw-page-title-main">FS Class ETR 460</span> Italian electric tilting train

The ETR 460 is an electric multiple unit (EMU) tilting train produced by FIAT Ferroviaria since 1993. It is also known as the Pendolino after the family of trains from which it comes.

<span class="mw-page-title-main">FS Class ETR 500</span> Italian high-speed trainset

ETR 500 is a family of Italian high-speed trains built by AnsaldoBreda and introduced in 1993.

P.A.Th.E./P, which stands for Patras–Athens–Thessaloniki–Idomeni/Promachonas is a higher-speed rail line in Greece which is partly completed and partly under construction. The section between Athens and Thessaloniki is completed and allows a travel time of 3 hours 20 minutes, a reduction of about three hours.

<span class="mw-page-title-main">Le Frecce</span>

Le Frecce is the high-speed rail train category operated by Trenitalia in Italy.

References

  1. "ETR485-from-June-2012.pdf" (PDF). Dropbox. Retrieved 29 June 2019.
  2. "EN - Trenitalia". www.trenitalia.com. Retrieved 29 June 2019.

Commons-logo.svg Media related to ETR 480 at Wikimedia Commons