| F12A Cruiser | |
|---|---|
 | |
| Role | Amateur-built aircraft |
| National origin | Canada |
| Manufacturer | Falconar Avia Manna Aviation |
| Designer | Chris Falconar |
| Status | Plans available (2019) |
| Number built | 20 (2011) |
| Developed from | Falconar F11 Sporty |
The Falconar F12A Cruiser is a Canadian amateur-built aircraft, designed by Chris Falconar and originally produced as a kit by Falconar Avia. The aircraft is now supplied as plans for amateur construction by Manna Aviation. [1] [2] [3] [4]
The F12A is a development of the Falconar F11 Sporty, which is, in turn, a variant of the Jodel D11. Falconar indicates that it incorporates a larger cockpit, simplified fittings, shoulder harnesses and aerodynamic improvements to improve stall characteristics over the Jodel design. [5]
Hans Teijgeler of Jodel.com says that the F12A varies from the D11 by using a new wing design, with new simplified spar and rib design and the dihedral point moved inboard, allowing the outer portion to fold for ground transport or storage, but at the cost of added weight, plus the option of a third seat. Teijgeler describes the wing as "less efficient". Teijgeler also notes that the F12 uses much larger and heavier engines with higher fuel consumption. Teijgeler says of the Falconar F12, "the Falconar 'Jodel' should not be looked upon as a Jodel, but as a Falconar. This is [n]either good or bad. Just a fact to take into account" [6]
The F12A features a cantilever low-wing, two-seats-in-side-by-side configuration, with an optional third seat, an enclosed cockpit that is 44 in (112 cm) wide, fixed conventional landing gear, or optionally tricycle landing gear, and a single engine in tractor configuration. [1]
The aircraft is made from wood, with its flying surfaces covered in doped aircraft fabric. Its 28 ft (8.5 m) span wing has an area of 140 sq ft (13 m2) and optionally can mount flaps. The aircraft's recommended engine power is 150 to 180 hp (112 to 134 kW) and engines that have been used include the 150 hp (112 kW) Lycoming O-320 and the 180 hp (134 kW) Lycoming O-360 four-stroke powerplants. Construction time from the supplied kit is 1200 hours. [1] [2]
By November 2012, six examples were registered in its home country with Transport Canada, one in the United States with the Federal Aviation Administration and two with the CAA in the United Kingdom. [7] [8] [9]
Data from Kitplanes and Purdy [1] [2]
General characteristics
Performance
The Barrows Bearhawk, now also called the Barrows 4-Place Bearhawk, is an American amateur-built aircraft, designed by Bob Barrows and produced by R&B Aircraft of Fincastle, Virginia, AviPro Aircraft and now Bearhawk Aircraft of Austin, Texas. The aircraft is supplied as a kit or as plans for amateur construction.
The Druine D.5 Turbi was a light aircraft designed in France in the 1950s for home building. It was a low-wing cantilever monoplane with fixed tailskid undercarriage. The pilot and a single passenger sat in tandem, open cockpits. Essentially a scaled-up version of the Druine Turbulent design, the Turbi shared that aircraft's wooden construction. Again, like its predecessor, it was intended to be able to be powered by a variety of air-cooled engines.
The Falconar AMF-S14 Maranda is a two-seat, light aircraft first flown in Canada in 1961 and originally marketed for amateur construction by Falconar Avia.
The Fisher Celebrity is a Canadian two-seat, conventional landing gear, single engined, biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States but the company is now located in Dorchester, Ontario, Canada.
The Wag-Aero CHUBy CUBy is a high-wing four-seat homebuilt cabin monoplane of tube-and-fabric construction, it is a modern representation of the Piper PA-14 taildragger with elements from other Piper family members. The plane is currently marketed as the Wag-Aero Sportsman 2+2 by Wag-Aero in kit form.
The Glasair Sportsman 2+2 is a single-engine, high wing, strut-braced, four seat kit aircraft, developed by the Glasair Aviation company.
The Carlson Skycycle is an American, single-seat, low-wing, single-engine, homebuilt aircraft that was originally designed by A. Hanford Eckman in 1945 and re-designed as a replica by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio in kit form. The prototype was completed in 1995.
The Earthstar Thunder Gull is a family of cantilever high-wing, tricycle gear ultralight aircraft, manufactured by Earthstar Aircraft of Santa Margarita, California as a kit for amateur construction or as a completed aircraft.
The Falconar Golden Hawk is a Canadian tandem seat, pusher configuration, tricycle gear, canard-equipped ultralight aircraft that is offered in kit form by Falconar Avia of Edmonton, Alberta.
The Air Creation Racer is a French single-seat, weight-shift control ultralight trike that was built by Air Creation of Aubenas between 1986 and 2010. It was available in kit form for amateur construction or as a completed aircraft.
The Murphy Elite is a Canadian light aircraft that was designed and is produced by Murphy Aircraft of Chilliwack, British Columbia. The aircraft is supplied as a kit for amateur construction.
The Glasair GlaStar is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation. It was first flown in 1994 and was superseded in production by the Glasair Sportsman 2+2 c. 2005. When it was available the aircraft was supplied as a kit for amateur construction.
The Stoddard-Hamilton Glasair II is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation as a kit for amateur construction. It was first flown in 1989, and remained in production in 2012.
The Custom Flight North Star is a Canadian amateur-built aircraft, designed by Morgan Williams and produced by Custom Flight of Tiny, Ontario. The aircraft is based on the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.
The Falconar AMF-14H Maranda is a Canadian amateur-built aircraft, designed and originally produced by Falconar Avia for the Canadian basic ultralight class and US light-sport aircraft category. The aircraft is supplied as a kit or as plans for amateur construction.
The Falconar F11 Sporty is a Canadian amateur-built aircraft, that was designed by Chris Falconar and produced by Falconar Avia. Falconar supplied it as a kit or as plans for amateur construction. Today both the F11A and E models are available as plans from Manna Aviation.
The Falconar F9A and F10A are a family of Canadian amateur-built aircraft, that were designed by Chris Falconar and produced by Falconar Avia. The F9A design was introduced in 1965 and both the F9A and F10A were supplied as kits or as plans for amateur construction by Falconar. The F9A and F10A are now available in the form of plans from Manna Aviation.
The Falconar SAL Mustang, also called the 2/3 Mustang and the SAL P-51D Mustang is a Canadian amateur-built aircraft, originally produced by Falconar Avia and introduced in 1969. The aircraft is a 2⁄3 scale replica of the North American P-51 Mustang and is supplied as a kit or as plans for amateur construction.
The Falconar Minihawk is a Canadian amateur-built aircraft, originally produced by Falconar Avia. The aircraft is supplied as a kit or plans for amateur construction.
The ARV Griffin is a Canadian homebuilt aircraft that was designed by Dave Marsden of the University of Alberta and produced by Canada Air RV and later by AC Millennium Corp, both of Edmonton. When it was available the aircraft was supplied as a kit for amateur construction.
