Fiber modification

Last updated

Fibre modification is a research field in which researchers aim at developing and applying technologies to impart new properties to natural fibres such as those in paper, in order to increase their functionality. Research areas in this field include many different technologies, amongst which the chemical modifications of fibres are widely used. One important sector of application of the chemical modifications is the treatment of wood for giving it enhanced properties such as higher mechanical properties, water impermeability, less hygroscopicity, bacterial and fungal resistance. Transferring and adapting the technical knowledge on fibre modification available for the wood sector to the recycled paper sector is an innovative use of these chemical treatments which has been the subject of studies that have been carried out within an EU co-funded project called Fibre+. [1]

Contents

The project Consortium included members representing Paper and Packaging European Associations (CEPI, FEFCO), and research institutes specialized in the wood and paper for packaging sector and paper and packaging companies. The focus of the project was on chemical modification of the paper made recycled fibres, investigating the possibility to transfer wood fibre modifications technique from the wood sector to paper and packaging sector. The aim was to enhance the properties of papers and of the packaging, as the recycling process causes the deterioration of fibres.

The chemical modification of recycled fibres aimed at the creation of a new generation of packaging papers characterized for being more recyclable, less hygroscopic, stiff and durable. The high recycling rate of papers in Europe (which is at the level of 72%) and the consequent importance that recycling has for the circular economy, were at the basis of this study. Paper products form part of an integrated carbon cycle based on the photosynthetic conversion of water, carbon dioxide, nutrients and solar energy into renewable wood-based biomass. Once consumed, paper may be recovered and used again either as a source of secondary fibres, to produce recycled paper or as bio-fuel. Fibre packages or corrugated containers made from corrugated board were the ones that were dealt with in the project, as they are considered as being the most prominent structural application of paper.

Chemical modification attempts

Fibre modification with chemicals or enzymes had been investigated in the production of fibreboards. [2] [3] [4] Fibre modification applying steam (steam-exploded wood) has been proved an efficient pre-treatment method in producing thermoplastic composites. [5] Current theories for interfibre bonding during papermaking process are based on general recognition of the hydrogen bonding model. Consequently, all effort for boosting fibre strength is connected to mechanical beating of fibres in order to generate more flexible and fragmented fibres for increased bonding areas. As a consequence, significant drawbacks are obtained in terms of water retention ratio resulting in poor dewatering behaviour and high energy consumption. New mechanisms for interpretation and control of interfibre bonding are still upcoming. One way to overcome these drawbacks could be the molecular coating of cellulose fibres using polymers targeted on entropy controlled mixing of polymers and cellulose gel resulting in higher bonding forces. Theoretical results as well as experimental data on how application of polymeric layers (e.g. carboxymethyl cellulose) and enzymes on cellulose fibres can lead to sheets of high bonding strength without any mechanical beating have been already presented. [6] However, these attempts were still far from any industrial implementation and their application would have been costly and would not solve the problem of raw material availability.

Objective

Based on this state-of-the-art, the objective of the project was to modify and thus improve the characteristics of different types of recovered fibres used for the production of a variety of packaging grade papers used as linerboard and corrugating medium for corrugated board manufacturing in Europe. Information on the actual furnish characteristics and composition of packaging materials is expected to help European packaging industry to evaluate its sources of supply and to adopt suitable methods and processes to improve the available resources in an optimal manner. In the case of packaging, scientific technical knowledge of practical industrial relations between fibre characteristics, paper properties and corrugated board properties also is needed.

From wood fibre modification to paper technology chemical wood modification aims at altering the structure of the cell wall matrix. Wood properties are improved considerably by converting hydrophilic OH-groups into larger more hydrophobic groups. Also the physical fixation of modifying chemicals in the cell wall matrix can considerably change the wood properties. In addition to a hydrophobing effect, the treatments reduce the volume of cell wall nano-pores and thus decrease the incorporation of water molecules into the cell wall matrix. On a macroscopic scale, wood modification can change important properties of the wood including biological durability (resistance against fungi), dimensional stability, hardness and UV-stability. [7]

Since paper is produced from wood fibres, it was possible to transfer some of the developments achieved in wood technology to paper technology. Several technologies (e.g. chemical modification, nano-scale celluloses, polyelectrolytes, functional polymers based on cellulose, hemicelluloses and starch) were researched and used by different research groups around Europe (e.g. PTS and University of Göttingen, Germany; Kungliga Tekniska högskolan (KTH), Sweden.) There is already well established knowledge on chemical fibre modification of recycled fibres. Adamopoulos and Mai (2011) modified recycled fibres with N-methylol compounds and glutaraldehyde with significant improvement on fibre characteristics and paper sheet performance. [8] Laboratory sheets manufactured with a variety of chemically modified recycled fibres were found to be superior in stiffness and hygroscopic properties than these manufactured from unmodified ones. [9] The intention of the Fibre+ project is to build on the existing knowledge on fibre modification for adapting, implementing and disseminating this innovative technology in European paper SMEs.

Results of the Fibre+ project on recycled fibres for packaging paper and information on potential developments of the Fibre+ concept can be found on the Fibre+ website including scientific articles that have been published as a consequence of the RTD work that has been carried out during the project. [10] [11]

Related Research Articles

<span class="mw-page-title-main">Cellulose</span> Polymer of glucose and structural component of cell wall of plants and green algae

Cellulose is an organic compound with the formula (C
6H
10O
5)
n, a polysaccharide consisting of a linear chain of several hundred to many thousands of β(1→4) linked D-glucose units. Cellulose is an important structural component of the primary cell wall of green plants, many forms of algae and the oomycetes. Some species of bacteria secrete it to form biofilms. Cellulose is the most abundant organic polymer on Earth. The cellulose content of cotton fiber is 90%, that of wood is 40–50%, and that of dried hemp is approximately 57%.

<span class="mw-page-title-main">Polymer</span> Substance composed of macromolecules with repeating structural units

A polymer (;) is a substance or material consisting of very large molecules called macromolecules, composed of many repeating subunits. Due to their broad spectrum of properties, both synthetic and natural polymers play essential and ubiquitous roles in everyday life. Polymers range from familiar synthetic plastics such as polystyrene to natural biopolymers such as DNA and proteins that are fundamental to biological structure and function. Polymers, both natural and synthetic, are created via polymerization of many small molecules, known as monomers. Their consequently large molecular mass, relative to small molecule compounds, produces unique physical properties including toughness, high elasticity, viscoelasticity, and a tendency to form amorphous and semicrystalline structures rather than crystals.

<span class="mw-page-title-main">Corrugated fiberboard</span> Composite paper material

Corrugated fiberboard or corrugated cardboard is a type of packaging material consisting of a fluted corrugated sheet and one or two flat linerboards. It is made on "flute lamination machines" or "corrugators" and is used for making corrugated boxes. The corrugated medium sheet and the linerboard(s) are made of kraft containerboard, a paperboard material usually over 0.25 millimetres (0.01 in) thick.

<span class="mw-page-title-main">Fiber</span> Natural or synthetic substance made of long, thin filaments

Fiber or fibre is a natural or artificial substance that is significantly longer than it is wide. Fibers are often used in the manufacture of other materials. The strongest engineering materials often incorporate fibers, for example carbon fiber and ultra-high-molecular-weight polyethylene.

<span class="mw-page-title-main">Pulp (paper)</span> Fibrous material used notably in papermaking

Pulp is a lignocellulosic fibrous material prepared by chemically or mechanically separating cellulose fibers from wood, fiber crops, waste paper, or rags. Mixed with water and other chemical or plant-based additives, pulp is the major raw material used in papermaking and the industrial production of other paper products.

<span class="mw-page-title-main">Paper engineering</span>

Paper engineering is a branch of engineering that deals with the usage of physical science and life sciences in conjunction with mathematics as applied to the converting of raw materials into useful paper products and co-products. The field applies various principles in process engineering and unit operations to the manufacture of paper, chemicals, energy and related materials. The following timeline shows some of the key steps in the development of the science of chemical and bioprocess engineering:

<span class="mw-page-title-main">Paperboard</span> Thick paper-based material

Paperboard is a thick paper-based material. While there is no rigid differentiation between paper and paperboard, paperboard is generally thicker than paper and has certain superior attributes such as foldability and rigidity. According to ISO standards, paperboard is a paper with a grammage above 250 g/m2, but there are exceptions. Paperboard can be single- or multi-ply.

Wood fibres are usually cellulosic elements that are extracted from trees and used to make materials including paper.

<span class="mw-page-title-main">Kraft paper</span> Paper or paperboard produced from chemical pulp produced in the kraft process

Kraft paper or kraft is paper or paperboard (cardboard) produced from chemical pulp produced in the kraft process.

<span class="mw-page-title-main">Biocomposite</span>

A biocomposite is a composite material formed by a matrix (resin) and a reinforcement of natural fibers. Environmental concern and cost of synthetic fibres have led the foundation of using natural fibre as reinforcement in polymeric composites. The matrix phase is formed by polymers derived from renewable and nonrenewable resources. The matrix is important to protect the fibers from environmental degradation and mechanical damage, to hold the fibers together and to transfer the loads on it. In addition, biofibers are the principal components of biocomposites, which are derived from biological origins, for example fibers from crops, recycled wood, waste paper, crop processing byproducts or regenerated cellulose fiber (viscose/rayon). The interest in biocomposites is rapidly growing in terms of industrial applications and fundamental research, due to its great benefits. Biocomposites can be used alone, or as a complement to standard materials, such as carbon fiber. Advocates of biocomposites state that use of these materials improve health and safety in their production, are lighter in weight, have a visual appeal similar to that of wood, and are environmentally superior.

<span class="mw-page-title-main">Paper</span> Material for writing, printing, etc.

Paper is a thin sheet material produced by mechanically or chemically processing cellulose fibres derived from wood, rags, grasses, or other vegetable sources in water, draining the water through a fine mesh leaving the fibre evenly distributed on the surface, followed by pressing and drying. Although paper was originally made in single sheets by hand, almost all is now made on large machines—some making reels 10 metres wide, running at 2,000 metres per minute and up to 600,000 tonnes a year. It is a versatile material with many uses, including printing, painting, graphics, signage, design, packaging, decorating, writing, and cleaning. It may also be used as filter paper, wallpaper, book endpaper, conservation paper, laminated worktops, toilet tissue, currency, and security paper, or in a number of industrial and construction processes.

Deinking is the industrial process of removing printing ink from paperfibers of recycled paper to make deinked pulp.

<span class="mw-page-title-main">Cellulose fiber</span> Fibers made with ethers or esters of cellulose

Cellulose fibers are fibers made with ethers or esters of cellulose, which can be obtained from the bark, wood or leaves of plants, or from other plant-based material. In addition to cellulose, the fibers may also contain hemicellulose and lignin, with different percentages of these components altering the mechanical properties of the fibers.

The wet strength of paper and paperboard is a measure of how well the web of fibers holding the paper together can resist a force of rupture when the paper is wet. Wet strength is routinely expressed as the ratio of wet to dry tensile force at break.

<span class="mw-page-title-main">Nanocellulose</span> Material composed of nanosized cellulose fibrils

Nanocellulose is a term referring to nano-structured cellulose. This may be either cellulose nanocrystal, cellulose nanofibers (CNF) also called nanofibrillated cellulose (NFC), or bacterial nanocellulose, which refers to nano-structured cellulose produced by bacteria.

<span class="mw-page-title-main">Paper chemicals</span> Chemicals used in paper manufacturing

Paper chemicals designate a group of chemicals that are used for paper manufacturing, or modify the properties of paper. These chemicals can be used to alter the paper in many ways, including changing its color and brightness, or by increasing its strength and resistance to water. The chemicals can be defined on basis of their usage in the process.

<span class="mw-page-title-main">Wood science</span> The scientific discipline of wood

Wood science is the scientific field which predominantly studies and investigates elements associated with the formation, composition and macro- and microstructure of wood. It additionally delves into the biological, chemical, physical, and mechanical properties and characteristics of wood, as a natural lignocellulosic material.

Curran is a microcrystalline nanocellulose fibre derived from the pulp of root vegetables. It was developed by Scottish scientists David Hepworth and Eric Whale, with funding from the Scottish Government. The sources of root vegetable pulp used to manufacture Curran include carrots, sugar beets, and turnips. It is named after curran, the Scottish Gaelic word for "carrot". The material was developed as a potential substitute for carbon fibre and is often used in polymer composites. It has numerous industrial and technological applications, especially for the production of paints and sporting equipment.

Hemp paper is paper varieties consisting exclusively or to a large extent from pulp obtained from fibers of industrial hemp. The products are mainly specialty papers such as cigarette paper, banknotes and technical filter papers. Compared to wood pulp, hemp pulp offers a four to five times longer fibre, a significantly lower lignin fraction as well as a higher tear resistance and tensile strength. Because the paper industry's processes have been optimized for wood as the feedstock, production costs currently are much higher than for paper from wood.

<span class="mw-page-title-main">Furfurylated wood</span>

Furfurylated wood is the end product of treating wood with furfuryl alcohol. This chemical process is also called furfurylation. Furfurylation is a commercially used wood modification process to enhance the physical, mechanical and biological properties of wood. In this process, which is based on principles of the wood sciences, the cell walls of the wood swell with furfuryl alcohol, which polymerizes within the cell walls. This treatment reduces the water absorption capacity of the wood, thus minimizing its tendency to deform with changes in moisture. The hardness and rot resistance of the modified wood are also improved compared to natural, untreated wood. The furfuryl alcohol used is obtained through the hydrogenation of furfural from biological agriwaste residues, such as husks and bagasse.

References

  1. ↑ 7th Framework Program – SME-AGs funding scheme – Grant Agreement n° 315633 – http://www.fibreplus.org
  2. ↑ Krzysik, A.M., J.A. Youngquist, R.M. Rowell, J.H. Muehl, P. Chow and S.R. Shook (1993). "Feasibility of using recycled newspapers as a fiber source for dry-process hardboards". For. Prod. J. 43: 53–58. OSTI   6276892.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  3. ↑ Gomez-Bueso et al. 2000
  4. ↑ Müller et al. 2009
  5. ↑ Takatani, M., Itoh, H,. Ohsugi, S,. Kitayama, T., Saegusa, M., Kawai, S. and Okamoto, T. (2000). "Effect of lignocellulosic material on the properties of thermoplastic polymer/wood composites". Holzforschung. 54 (2): 197–200. doi:10.1515/HF.2000.033. S2CID   137187547.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  6. ↑ Laine at al. 2002, Gustavsson 2003, Danielsson 2006, Erhard 2010.
  7. ↑ Hill CAS (2006). Wood modification. Chemical, thermal and other processes. Wiley, Chichester. ISBN   978-0-470-02172-9.
  8. ↑ Adamopoulos and Mai (2011).
  9. ↑ Adamopoulos et al. 2011
  10. ↑ Hosseinpourpia, R., Adamopoulos, S. and C. Mai (2015). "Tensile strength of handsheets from recovered fibers treated with N-methylol melamine (NMM) and 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU)". Journal of Applied Polymer Science. 132 (3). doi:10.1002/APP.41290.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  11. ↑ Adamopoulos, S., Hosseinpourpia, R., and C. Mai (2014). "Tensile strength of handsheets prepared with macerated fibres from solid wood modified with cross-linking agents". Holzforschung. 69 (8): 959–966. doi:10.1515/hf-2014-0216. S2CID   137605505.{{cite journal}}: CS1 maint: multiple names: authors list (link)
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.