Fish mortality

Last updated

Fish mortality is a parameter used in fisheries population dynamics to account for the loss of fish in a fish stock through death. The mortality can be divided into two types:

Contents

(M) and (F) are additive instantaneous rates that sum up to (Z), the instantaneous total mortality coefficient; that is, Z=M+F. [2] These rates are usually calculated on an annual basis. Estimates of fish mortality rates are often included in mathematical yield models to predict yield levels obtained under various exploitation scenarios. These are used as resource management indices or in bioeconomic studies of fisheries.

Estimating mortality

Natural

Estimating natural mortality (M) is one of the most difficult and critical elements of a stock assessment (Hewitt et al. 2007). There are two basic approaches used to estimate natural mortality: tagging studies and growth parameters. Tagging studies are used in the Brownie Model, where multiyear tagging studies are used to estimate natural mortality based on recaptures:

fi = ri(1 – Si)

The Paulys Model (using growth parameters) is an indirect way of estimating natural mortality. It assumes that there is a relationship between size and natural mortality. Pauly’s original method was based on the correlation of M with von Bertalanffy growth parameters (K and L∞) and temperature (Gunderson 2002):

N0 = N 1*e(-Z*∆t)

In the Hoenigs method, M was inversely correlated with longevity across a wide variety of taxa (Hewitt and Hoenig 2005):

Ln(M) = 1.44-0.982*ln(tmax)

Fishing

Fishing mortality (F) can be estimated by dividing the catch by the mean stock size. The catch includes annual commercial and recreational landings, along with dead discards. Bycatch discards would be estimated by estimating the percent of fish that are captured in a certain gear and the mortality associated with being captured in this gear. These mortality studies are generally done by using cages for a certain period of time following capture to determine the percentage of fish that die during being held in holding cages. These deaths are assumed to be associated with physical injury or physiological stress from being captured in the gear used during capture.

Why estimating mortality is important

Mortality estimates are important to managers. Determining mortality rates are critical for determining abundance of fish populations. Using the model Z=M+F with M being Natural mortality and F being Fishing mortality (combined mortality from landings plus discard mortality) you can estimate the trend of a population. The mortality rates give you the total deaths of a population when you compare these to the total births or recruits to the population, you can determine if a population is increasing or decreasing. Knowing these rates can help managers to set harvest limits to (MSY) maximum sustainable yield or (OSY) optimum sustainable yield to give the maximum benefit to the stakeholders of the resource.

See also

Related Research Articles

The carrying capacity of an environment is the maximum population size of a biological species that can be sustained by that specific environment, given the food, habitat, water, and other resources available. The carrying capacity is defined as the environment's maximal load, which in population ecology corresponds to the population equilibrium, when the number of deaths in a population equals the number of births. The effect of carrying capacity on population dynamics is modelled with a logistic function. Carrying capacity is applied to the maximum population an environment can support in ecology, agriculture and fisheries. The term carrying capacity has been applied to a few different processes in the past before finally being applied to population limits in the 1950s.

Fishery Raising or harvesting fish

Fishery is the enterprise of raising or harvesting fish and other aquatic life. Commercial fisheries include wild fisheries and fish farms, both in fresh water and the oceans. About 500 million people worldwide are economically dependent on fisheries. 171 million tonnes of fish were produced in 2016, but overfishing is an increasing problem -- causing declines in some populations. Recreational fishing is popular in many locations, particularly North America, Europe, New Zealand, and Australia.

Trawling Method of catching fish; principle by which netting bags are being towed in water to catch different species of fishes in their path

Trawling is a method of fishing that involves pulling a fishing net through the water behind one or more boats. The net used for trawling is called a trawl. This principle requires netting bags which are towed through water to catch different species of fishes or sometimes targeted species. Trawls are often called towed gear or dragged gear.

In population ecology and economics, maximum sustainable yield (MSY) is theoretically, the largest yield that can be taken from a species' stock over an indefinite period. Fundamental to the notion of sustainable harvest, the concept of MSY aims to maintain the population size at the point of maximum growth rate by harvesting the individuals that would normally be added to the population, allowing the population to continue to be productive indefinitely. Under the assumption of logistic growth, resource limitation does not constrain individuals' reproductive rates when populations are small, but because there are few individuals, the overall yield is small. At intermediate population densities, also represented by half the carrying capacity, individuals are able to breed to their maximum rate. At this point, called the maximum sustainable yield, there is a surplus of individuals that can be harvested because growth of the population is at its maximum point due to the large number of reproducing individuals. Above this point, density dependent factors increasingly limit breeding until the population reaches carrying capacity. At this point, there are no surplus individuals to be harvested and yield drops to zero. The maximum sustainable yield is usually higher than the optimum sustainable yield and maximum economic yield.

Bycatch

Bycatch, in the fishing industry, is a fish or other marine species that is caught unintentionally while catching certain target species and target sizes of fish, crabs etc. Bycatch is either of a different species, the wrong sex, or is undersized or juvenile individuals of the target species. The term "bycatch" is also sometimes used for untargeted catch in other forms of animal harvesting or collecting. Non-marine species that are caught but regarded as generally 'undesirable' are referred to as rough fish and coarse fish.

Overfishing

Overfishing is the removal of a species of fish from a body of water at a rate that the species cannot replenish, resulting in those species becoming underpopulated in that area. In a Food and Agriculture Organization of the United Nations 2018 report, the FAO estimates that one-third of world fish stocks were overfished by 2015. Over 30 billion euros in public subsidies are directed to fisheries annually.

Fishing industry The economic sector concerned with taking, culturing, processing, preserving, storing, transporting, marketing or selling fish or fish products

The fishing industry includes any industry or activity concerned with taking, culturing, processing, preserving, storing, transporting, marketing or selling fish or fish products. It is defined by the Food and Agriculture Organization as including recreational, subsistence and commercial fishing, and the related harvesting, processing, and marketing sectors. The commercial activity is aimed at the delivery of fish and other seafood products for human consumption or as input factors in other industrial processes. Directly or indirectly, the livelihood of over 500 million people in developing countries depends on fisheries and aquaculture.

The goal of Fisheries management is to produce sustainable biological, social, and economic benefits from renewable aquatic resources. Fisheries are classified as renewable because the organisms of interest usually produce an annual biological surplus that with judicious management can be harvested without reducing future productivity. Fisheries management employs activities that protect fishery resources so sustainable exploitation is possible, drawing on fisheries science and possibly including the precautionary principle. Modern fisheries management is often referred to as a governmental system of appropriate management rules based on defined objectives and a mix of management means to implement the rules, which are put in place by a system of monitoring control and surveillance. A popular approach is the ecosystem approach to fisheries management. According to the Food and Agriculture Organization of the United Nations (FAO), there are "no clear and generally accepted definitions of fisheries management". However, the working definition used by the FAO and much cited elsewhere is:

The integrated process of information gathering, analysis, planning, consultation, decision-making, allocation of resources and formulation and implementation, with enforcement as necessary, of regulations or rules which govern fisheries activities in order to ensure the continued productivity of the resources and the accomplishment of other fisheries objectives.

Gillnetting

Gillnetting is a fishing method that uses gillnets: vertical panels of netting that hang from a line with regularly spaced floaters that hold the line on the surface of the water. The floats are sometimes called "corks" and the line with corks is generally referred to as a "cork line." The line along the bottom of the panels is generally weighted. Traditionally this line has been weighted with lead and may be referred to as "lead line." A gillnet is normally set in a straight line. Gillnets can be characterized by mesh size, as well as colour and type of filament from which they are made. Fish may be caught by gillnets in three ways:

  1. Wedged – held by the mesh around the body.
  2. Gilled – held by mesh slipping behind the opercula.
  3. Tangled – held by teeth, spines, maxillaries, or other protrusions without the body penetrating the mesh.
Unsustainable fishing methods

Unsustainable fishing methods refers to the utilization of the various fishing methods in order to capture or harvest fish, at a rate which sees the declining of fish populations over time. These methods are observed to facilitate the destructive fishing practices that destroy ecosystems within the ocean, and is used as a tool for over-fishing which results in the depletion of fish populations at a rate that cannot be sustained.

Environmental impact of fishing

The environmental impact of fishing includes issues such as the availability of fish, overfishing, fisheries, and fisheries management; as well as the impact of industrial fishing on other elements of the environment, such as by-catch. These issues are part of marine conservation, and are addressed in fisheries science programs. According to a 2019 FAO report, global production of fish, crustaceans, molluscs and other aquatic animals has continued to grow and reached 172.6 million tonnes in 2017, with an increase of 4.1 percent compared with 2016. There is a growing gap between the supply of fish and demand, due in part to world population growth.

Discards are the portion of a catch of fish which is not retained on board during commercial fishing operations and is returned, often dead or dying, to the sea. The practice of discarding is driven by economic and political factors; fish which are discarded are often unmarketable species, individuals which are below minimum landing sizes and catches of species which fishermen are not allowed to land, for instance due to quota restrictions. Discards form part of the bycatch of a fishing operation, although bycatch includes marketable species caught unintentionally. Discarding can be highly variable in time and space as a consequence of changing economic, sociological, environmental and biological factors.

The sustainable yield of natural capital is the ecological yield that can be extracted without reducing the base of capital itself, i.e. the surplus required to maintain ecosystem services at the same or increasing level over time. This yield usually varies over time with the needs of the ecosystem to maintain itself, e.g. a forest that has recently suffered a blight or flooding or fire will require more of its own ecological yield to sustain and re-establish a mature forest. While doing so, the sustainable yield may be much less.

Population dynamics of fisheries

A fishery is an area with an associated fish or aquatic population which is harvested for its commercial or recreational value. Fisheries can be wild or farmed. Population dynamics describes the ways in which a given population grows and shrinks over time, as controlled by birth, death, and migration. It is the basis for understanding changing fishery patterns and issues such as habitat destruction, predation and optimal harvesting rates. The population dynamics of fisheries is used by fisheries scientists to determine sustainable yields.

This is a glossary of terms used in fisheries, fisheries management and fisheries science.

Destructive fishing practices are practices that easily result in irreversible damage to aquatic habitats and ecosystems. Many fishing techniques can be destructive if used inappropriately, but some practices are particularly likely to result in irreversible damage. These practices are mostly, though not always, illegal. Where they are illegal, they are often inadequately enforced.

Stock assessment

Stock assessments provide fisheries managers with the information that is used in the regulation of a fish stock. Biological and fisheries data are collected in a stock assessment.

Chilean jack mackerel Species of fish

The Chilean jack mackerel, sometimes called the Inca scad or Peruvian jack mackerel, is a species of jack mackerel in the genus Trachurus of the family Carangidae. Since the 1970s, it has become one of the world's more important commercial fish species. High volumes have been harvested, but the fishery may now be in danger of collapsing.

The following outline is provided as an overview of and topical guide to fisheries:

Fisheries-induced evolution (FIE) is the microevolution of an exploited aquatic organism's population, brought on through the artificial selection for biological traits by fishing practices. Fishing, of any severity or effort, will impose an additional layer of mortality to the natural population equilibrium and will be selective to certain genetic traits within that organism's gene pool. This removal of selected traits fundamentally changes the population gene frequency, resulting in the artificially induced microevolution by the proxy of the survival of untargeted fish and their propagation of heritable biological characteristics. This artificial selection often counters natural life-history pattern for many species, such as causing early sexual maturation, diminished sizes for matured fish, and reduced fecundity in the form of smaller egg size, lower sperm counts and viability during reproductive events. These effects can have prolonged effects on the adaptability or fitness of the species to their environmental factors.

References

  1. 1 2 Sparre, P.; Ursin E.and Venema S. C. (1989). Introduction to tropical fish stock assessment. Part 1- Manual. FAO Fisheries Technical Paper No. 3061. Rome, FAO. p. 337.
  2. Gulland, J.A. (1969). Manual of Methods for fish stock assessment. Part 1. Fish population analysis. FAO Man.Fish. Sci., (4):154.