GER Class D27

Last updated

GER Class D27
GER 2-2-2 Class D27 No1000.jpg
GER 1000, the first of the 1893 batch
Type and origin
Power typeSteam
Designer James Holden
Builder Stratford Works
Build date1889–1893
Total produced21
Specifications
Configuration:
   Whyte 2-2-2
   UIC 1A1 n2
Gauge 4 ft 8+12 in (1,435 mm)
Leading dia. 4 ft 0 in (1.219 m)
Driver dia.7 ft 0 in (2.134 m)
Trailing dia. 4 ft 0 in (1.219 m)
Wheelbase 36 ft 7 in (11.15 m)
Length48 ft 2 in (14.68 m) over buffers
Adhesive weight 17 long tons 10 cwt (39,200 lb or 17.8 t)
Loco weight40 long tons 3.5 cwt (90,000 lb or 40.8 t)
Fuel typeCoal, some fuel oil
Firebox:
  Grate area18.0 sq ft (1.67 m2)
Boiler pressure140 lbf/in2 (965 kPa) later 160 lbf/in2 (1,103 kPa)
Heating surface1,199.5 sq ft (111.44 m2)
Cylinders Two, inside
Cylinder size 18 in × 24 in (460 mm × 610 mm), later 18 in × 24 in (460 mm × 610 mm)
Performance figures
Tractive effort 11,016 lbf (49.00 kN), later 13,114 lbf (58.33 kN)
Career
Operators Great Eastern Railway
Class D27
Withdrawn1901–1907
DispositionAll scrapped

The GER Class D27 was a class of 2-2-2 steam tender locomotives designed by James Holden for the Great Eastern Railway.

Contents

History

In 1888, Holden experimented by removing the side rods of T19 No. 721 to form a 2-2-2. [1] In 1889 the first of a new class appeared: initially No. 740 (later 789 and 780) which had been built on a 'Locomotive and Machinery' account. This was followed by two batches of ten on the more normal 'Letter' account. [2] in 1893. They were built with 18-by-24-inch (457 mm × 610 mm) [3] inside cylinders powered by a 140-pound-force-per-square-inch (965 kPa) boiler. They were later rebuilt with 18-by-25-inch (457 mm × 635 mm) and 160-pound-force-per-square-inch (1,103 kPa) boilers. [2]

Table of orders and numbers [2]
YearOrder no.ManufacturerQuantityGER Nos.Notes
1889LM68 Stratford Works 1740Renumbered 789, then 780
1891D27 Stratford Works 10770–779
1893F32 Stratford Works 101000–1009

One of their main spheres was on the Joint Line working expresses to York. In 1896 the class inaugurated the epic making non-stop run to North Walsham using oil-firing. Rous-Martin [4] found that the singles climbed Brentwood Bank more rapidly than the 2-4-0s. See also Ahrons (1951).

Nine locomotives were withdrawn between 1901 and 1903. The surviving eight locomotives in the 770-series were transferred to the duplicate list in July 1904, and had their number prefixed with a "0". The remaining fourteen were withdrawn between 1904 and 1907. [5]

Table of withdrawals [5]
YearQuantity in
service at
start of year
Quantity
withdrawn
Locomotive numbers
19012141000, 1002, 1005, 1007
1902173773, 1001, 1003
19031421008, 1009
1904124775, 0771, 1004, 1006
1905840772, 0774, 0777, 0780
1906410770
1907330776, 0778, 0779

Related Research Articles

<span class="mw-page-title-main">GER Class A55</span>

The GER Class A55 or Decapod was an experimental steam locomotive with an 0-10-0T wheel arrangement designed by James Holden for the Great Eastern Railway. It was the first ten-coupled steam locomotive in Great Britain.

<span class="mw-page-title-main">GER Class C53</span> Class of British locomotives

The GER Class C53 was a class of twelve 0-6-0T steam tram locomotives designed by James Holden for the Great Eastern Railway. They passed to the London and North Eastern Railway at the grouping, and received the LNER classification J70.

<span class="mw-page-title-main">James Holden (locomotive engineer)</span>

James Holden was an English locomotive engineer.

The GER Class F48 was a class of sixty 0-6-0 steam tender locomotives designed by James Holden for the Great Eastern Railway in Great Britain. They passed to the London and North Eastern Railway at the grouping in 1923 and received the LNER classification J16.

<span class="mw-page-title-main">GER Class G58</span>

The GER Class G58 is a class of 0-6-0 steam tender locomotives designed by James Holden for the Great Eastern Railway in England. The class consisted partly of new locomotives built from 1905 to 1911 and partly of rebuilds of the earlier GER Class F48 built from 1900 to 1903. The rebuilding started under GER auspices from 1921 and was continued by the London and North Eastern Railway (LNER) after grouping in 1923.

<span class="mw-page-title-main">GER Class T19</span>

The GER Class T19 was a class of 2-4-0 steam tender locomotives designed by James Holden for the Great Eastern Railway. Some were later rebuilt with larger boilers while others were rebuilt with both larger boilers and a 4-4-0 wheel arrangement. Unusually, both the 2-4-0 and 4-4-0 rebuilds were classified as GER Class T19 Rebuilt. All the 2-4-0s had been withdrawn by 1920 so only the 4-4-0s passed to the London and North Eastern Railway in 1923 and these became the LNER Class D13.

<span class="mw-page-title-main">GER Class T26</span>

The GER Class T26 was a class of one hundred 2-4-0 steam tender locomotives designed by James Holden for the Great Eastern Railway. At the 1923 grouping they all passed to the London and North Eastern Railway, who classified them E4. Eighteen survived into British Railways ownership in 1948, and the last was withdrawn in 1959, making them the last 2-4-0 tender locomotives at work in Britain. Their BR numbers were 62780–62797.

<span class="mw-page-title-main">GER Class P43</span>

The GER Class P43 was a class of ten 4-2-2 steam tender locomotives designed by James Holden for the Great Eastern Railway. They were the last 'singles' built for the Great Eastern, and the last in service.

<span class="mw-page-title-main">GER Class T18</span>

The GER Class T18 was a class of fifty 0-6-0T steam locomotives designed by James Holden for the Great Eastern Railway. They passed to the London and North Eastern Railway at the grouping in 1923 and received the LNER classification J66.

The GER Class E22 was a class of twenty 0-6-0T steam locomotives designed by James Holden for the Great Eastern Railway. They passed to the London and North Eastern Railway at the grouping in 1923 and received the LNER classification J65.

<span class="mw-page-title-main">GER Class R24</span>

The GER Class R24 was a class of 0-6-0T steams designed by James Holden for the Great Eastern Railway (GER). They passed to the London and North Eastern Railway at the grouping in 1923 and received the LNER classification J67. Some R24s were rebuilt with higher boiler pressure in which form they were similar to the later Class S56. The rebuilt R24s, together with the S56s, were classified J69 by the LNER.

<span class="mw-page-title-main">GER Class 209</span> 0-4-0 saddle tank locomotive

The GER Class 209 was a class of 0-4-0 saddle tank steam locomotives of the Great Eastern Railway. These locomotives were similar to the NBR G Class but had flat-topped, instead of round-topped, tanks. A total of eight were built – four by Neilson and Company in 1874 and four more by the GER's Stratford Works between 1897 and 1903.

<span class="mw-page-title-main">GER Class N31</span>

The GER Class N31 was a class of eighty-two 0-6-0 steam locomotives designed by James Holden for the Great Eastern Railway. Eighteen passed to the London and North Eastern Railway (LNER) at the 1923 grouping and received the LNER classification J14.

The GER Class 127 was a class of a solitary experimental 0-6-0 compound steam locomotive built by the Great Eastern Railway at its Stratford Works in 1888. It was rebuilt as a simple locomotive in 1895, and withdrawn in 1913.

<span class="mw-page-title-main">GER Class E72</span>

The GER Class E72 was a class of ten 0-6-0 steam locomotives designed by S. D. Holden for the Great Eastern Railway. They all passed to the London and North Eastern Railway at the 1923 grouping and received the classification J18.

<span class="mw-page-title-main">GER Class S44</span>

The GER Class S44 was a class of forty 0-4-4T steam locomotives designed by James Holden for the Great Eastern Railway. They all passed to the London and North Eastern Railway at the 1923 grouping and received the classification G4.

<span class="mw-page-title-main">GER Class T77</span>

The GER Class T77 was a class of twenty-five 0-6-0 steam locomotives designed by A. J. Hill for the Great Eastern Railway. They all passed to the London and North Eastern Railway at the 1923 grouping and received the classification J19.

<span class="mw-page-title-main">GER Class D81</span>

The GER Class D81 was a class of twenty-five 0-6-0 steam locomotives designed by A. J. Hill for the Great Eastern Railway. The all passed to the London and North Eastern Railway at the 1923 grouping and received the classification J20.

The GER Class Y65 was a class of twelve 2-4-2T steam locomotives designed by S. D. Holden and built by the company's Stratford Works in 1909–1910. They all passed to the London and North Eastern Railway at the 1923 grouping and received the classification F7.

<span class="mw-page-title-main">GER Class C32</span>

The GER Class C32 was a class of fifty 2-4-2T steam locomotives designed by James Holden and built by the company's Stratford Works between 1892 and 1902. They all passed to the London and North Eastern Railway at the 1923 grouping and received the classification F3.

References

  1. Allen 1961 , p. 114
  2. 1 2 3 Aldrich 1969 , p. 34
  3. Rous-Marten 1902 , p. 272
  4. Rous-Marten 1898a
  5. 1 2 Aldrich 1969 , p. 35