Galleting

Last updated
This detail from St. James Episcopal Church in Philadelphia, PA (U.S.) shows a typical use of galleting. St. James Episcopal Church Sparks Building 540.jpg
This detail from St. James Episcopal Church in Philadelphia, PA (U.S.) shows a typical use of galleting.

Galleting, sometimes known as garreting or garneting, [1] [2] [3] [4] [5] is an architectural technique in which spalls (small pieces of stone) are pushed into wet mortar joints during the construction of a masonry building. The term comes from the French word galet, which means "pebble." [6] In general, the word "galleting" refers to the practice while the word "gallet" refers to the spall. [6] [7] Galleting was mostly used in England, where it was common in South East England and the county of Norfolk.

Contents

Description

The main building of West Dean College in Sussex, England is an example of using flint galleting in flint walls. Flint Galleting, Ian Capper.jpg
The main building of West Dean College in Sussex, England is an example of using flint galleting in flint walls.

Galleting is mainly used in stone masonry buildings constructed out of sandstone or flint. The technique varies depending on which of these materials is used. In sandstone buildings, the spalls are often a different type of sandstone than the one used in the wall, though sometimes they are pieces of the same stone. For example, carstone, also known as ironstone, is a type of sandstone that is commonly used for galleting. In sandstone buildings, the spalls are usually shaped into small cubes about half an inch in diameter and are flush with the stone. In flint buildings, the edges of thin slivers of flint are commonly pushed into the mortar, so that the surface of the wall is uneven and the edges of the flint spalls jut out from the wall. In some cases, these techniques are combined such that flint walls are galleted with sandstone spalls or vice versa, however it is uncommon. Although it is also uncommon, galleting has been used in brick masonry construction, where sandstone spalls are generally used over flint ones. [1] [3] More eclectic materials used as gallets include brick, tile, beach pebbles, glass, and oyster shells. [8] In higher status buildings, galleting was superseded by square knapping the flints to produce flat, squared stones that produced a surface with little exposed mortar. [9]

It is unclear whether galleting performs a practical, structural function or is an aesthetic application. It is possible that galleting is used when the local stone is not an easily worked freestone, which means that the stone is more irregular and therefore requires thick mortar joints. [1] In this case, gallets would serve as wedges to provide structural support to the stone and would shield the mortar from weather. [10] [11] It is also possible that galleting does not reinforce the mortar and was used purely for aesthetic reasons. [1] [8] Scholarship has also suggested that galleting was neither a structural nor an aesthetic practice, but rather a superstitious one in an attempt to protect a building from witches and other evil influences. [3] However, Historic Scotland Technical Advice Note 1, regarding use of lime mortars, 1995, CLEARLY states "...numerous small pinning stones which contributed to the overall stability of the masonry, reduced the quantity of expensive lime required and minimised the effects of drying shrinkage in the mortar".

Location

A house in Puttenham, Surrey, England prominently displays galleting. Galleting at Puttenham - geograph.org.uk - 92196.jpg
A house in Puttenham, Surrey, England prominently displays galleting.

In England, galleting can be found almost exclusively in the South East between the North and South Downs, where sandstone is common, and in the county of Norfolk, where flint is common. [1] [8] [12] Given that these locations are not contiguous, much has been debated about the origin and spread of the practice, with some attributing its geographical prevalence to the particularities of the stonemason trade. [8]

Most scholarship focuses on the use of galleting in England. However, there is evidence that it was used in rural Pennsylvania and Maryland as well as in Philadelphia, Vienna, Austria, the Azores, Paris, and Barcelona. [3] [13] [14] [15] [16] [17]

Period of use

There is some debate about when galleting was most commonly practiced. Some sources associate the technique with late medieval building construction, while others suggest that galleting was used mostly in the 17th and 18th centuries before declining in popularity over the course of the 19th century. [4] [5] [8] [10] Historical records indicate that parts of Windsor Castle (n.d.), Eton College (c. 1441), and the Tower of London (c. 1514) were galleted with flint or oyster shells. This suggests that galleting may have been first used in more prestigious buildings and was later adopted in less prestigious buildings once timber framing was supplanted by masonry construction. [8]

Examples

St James' Episcopal Church in the Kingsessing neighborhood of Philadelphia, Pennsylvania (U.S.) is a rare example of galleting outside of England. St. James Episcopal Church Sparks Building 534.jpg
St James' Episcopal Church in the Kingsessing neighborhood of Philadelphia, Pennsylvania (U.S.) is a rare example of galleting outside of England.

Related Research Articles

<span class="mw-page-title-main">Masonry</span> Building of structures from individual units of stone, bricks, or blocks

Masonry is the craft of building a structure with brick, stone, or similar material, including mortar plastering which are often laid in, bound and pasted together by mortar. The term masonry can also refer to the building units themselves.

<span class="mw-page-title-main">Flint</span> Cryptocrystalline form of the mineral quartz

Flint, occasionally flintstone, is a sedimentary cryptocrystalline form of the mineral quartz, categorized as the variety of chert that occurs in chalk or marly limestone. Historically, flint was widely used to make stone tools and start fires.

<span class="mw-page-title-main">Stonemasonry</span> Creation of buildings, structures, and sculpture using stone

Stonemasonry or stonecraft is the creation of buildings, structures, and sculpture using stone as the primary material. Stonemasonry is the craft of shaping and arranging stones, often together with mortar and even the ancient lime mortar, to wall or cover formed structures.

<span class="mw-page-title-main">Ashlar</span> Finely dressed stone and associated masonry

Ashlar is a cut and dressed stone, worked using a chisel to achieve a specific form, typically rectangular in shape. The term can also refer to a structure built from such stones.

<span class="mw-page-title-main">Norwich Cathedral</span> Cathedral in Norfolk, England

Norwich Cathedral, formally the Cathedral Church of the Holy and Undivided Trinity, is a Church of England cathedral in the city of Norwich, Norfolk, England. The cathedral is the seat of the bishop of Norwich and the mother church of the diocese of Norwich. It is administered by its dean and chapter, and there are daily Church of England services. It is a Grade I listed building.

<span class="mw-page-title-main">Repointing</span> Repair of exterior mortar

Repointing is the process of renewing the pointing, which is the external part of mortar joints, in masonry construction. Over time, weathering and decay cause voids in the joints between masonry units, usually in bricks, allowing the undesirable entrance of water. Water entering through these voids can cause significant damage through frost weathering and from salt dissolution and deposition. Repointing is also called pointing, or pointing up, although these terms more properly refer to the finishing step in new construction.

<span class="mw-page-title-main">Inca architecture</span> Pre-Columbian architecture in South America

Inca architecture is the most significant pre-Columbian architecture in South America. The Incas inherited an architectural legacy from Tiwanaku, founded in the 2nd century B.C.E. in present-day Bolivia. A core characteristic of the architectural style was to use the topography and existing materials of the land as part of the design. The capital of the Inca empire, Cuzco, still contains many fine examples of Inca architecture, although many walls of Inca masonry have been incorporated into Spanish Colonial structures. The famous royal estate of Machu Picchu is a surviving example of Inca architecture. Other significant sites include Sacsayhuamán and Ollantaytambo. The Incas also developed an extensive road system spanning most of the western length of the continent and placed their distinctive architecture along the way, thereby visually asserting their imperial rule along the frontier.

<span class="mw-page-title-main">Lime mortar</span> Building material

Lime mortar or torching is a masonry mortar composed of lime and an aggregate such as sand, mixed with water. It is one of the oldest known types of mortar, used in ancient Rome and Greece, when it largely replaced the clay and gypsum mortars common to ancient Egyptian construction.

<span class="mw-page-title-main">Stone wall</span> Masonry structural division

Stone walls are a kind of masonry construction that has been used for thousands of years. The first stone walls were constructed by farmers and primitive people by piling loose field stones into a dry stone wall. Later, mortar and plaster were used, especially in the construction of city walls, castles, and other fortifications before and during the Middle Ages. These stone walls are spread throughout the world in different forms.

<span class="mw-page-title-main">Stone veneer</span> Thin sheets of stone applied as a decorative surface

Stone veneer is a thin layer of any stone used as decorative facing material that is not meant to be load bearing. Stone cladding is a stone veneer, or simulated stone, applied to a building or other structure made of a material other than stone. Stone cladding is sometimes applied to concrete and steel buildings as part of their original architectural design.

<span class="mw-page-title-main">Architectural terracotta</span> Fired clay construction material

Architectural terracotta refers to a fired mixture of clay and water that can be used in a non-structural, semi-structural, or structural capacity on the exterior or interior of a building. Terracotta pottery, as earthenware is called when not used for vessels, is an ancient building material that translates from Latin as "baked earth". Some architectural terracotta is actually stronger than stoneware. It can be unglazed, painted, slip glazed, or glazed.

<span class="mw-page-title-main">Formstone</span>

Formstone is a type of stucco commonly applied to brick rowhouses in many East Coast urban areas in the United States, although it is most strongly associated with Baltimore. As a form of simulated masonry, Formstone is commonly colored and shaped on the building to imitate various forms of masonry compound, creating the trompe-l'œil appearance of stone.

Core-and-veneer, brick and rubble, wall and rubble, ashlar and rubble, and emplekton all refer to a building technique where two parallel walls are constructed and the core between them is filled with rubble or other infill, creating one thick wall. Originally, and in later poorly constructed walls, the rubble was not consolidated. Later, mortar and cement were used to consolidate the core rubble and produce sturdier construction.

<span class="mw-page-title-main">Rubble masonry</span> Type of building stone

Rubble masonry or rubble stone is rough, uneven building stone not laid in regular courses. It may fill the core of a wall which is faced with unit masonry such as brick or ashlar. Some medieval cathedral walls have outer shells of ashlar with an inner backfill of mortarless rubble and dirt.

The history of construction traces the changes in building tools, methods, techniques and systems used in the field of construction. It explains the evolution of how humans created shelter and other structures that comprises the entire built environment. It covers several fields including structural engineering, civil engineering, city growth and population growth, which are relatives to branches of technology, science, history, and architecture. The fields allow both modern and ancient construction to be analyzed, as well as the structures, building materials, and tools used.

<span class="mw-page-title-main">Roman brick</span> Style of brick used in Ancient Roman architecture

Roman brick is a type of brick used in ancient Roman architecture and spread by the Romans to the lands they conquered, or a modern adaptation inspired by the ancient prototypes. Both types are characteristically longer and flatter than standard modern bricks.

<span class="mw-page-title-main">Flushwork</span> Type of decorative masonry work

In architecture, flushwork is decorative masonry work which combines on the same flat plane flint and ashlar stone. If the stone projects from a flat flint wall then the term is proudwork, as the stone stands "proud" rather than being "flush" with the wall.

<span class="mw-page-title-main">Cobblestone architecture</span>

Cobblestone architecture refers to the use of cobblestones embedded in mortar as method for erecting walls on houses and commercial buildings. It was frequently used in the northeastern United States and upper Midwest in the early 19th century; the greatest concentration of surviving cobblestone buildings is in New York State, generally near the historic Erie Canal or connecting canals.

<span class="mw-page-title-main">Carrstone</span> Sedimentary sandstone conglomerate formed during the Cretaceous period

Carrstone is a sedimentary sandstone conglomerate formed during the Cretaceous period. It varies in colour from light to dark rusty ginger. Used as a building stone it can be found in Bedfordshire, Cambridgeshire and extensively in the historic buildings of northwest Norfolk.

<span class="mw-page-title-main">Blakeney Chapel</span> Ruined building on the North Norfolk coast of England

Blakeney Chapel is a ruined building on the coast of North Norfolk, England. Despite its name, it was probably not a chapel, nor is it in the adjoining village of Blakeney, but rather in the parish of Cley next the Sea. The building stood on a raised mound or "eye" on the seaward end of the coastal marshes, less than 200 m (220 yd) from the sea and just to the north of the current channel of the River Glaven where it turns to run parallel to the shoreline. It consisted of two rectangular rooms of unequal size, and appears to be intact in a 1586 map, but is shown as ruins in later charts. Only the foundations and part of a wall still remain. Three archaeological investigations between 1998 and 2005 provided more detail of the construction, and showed two distinct periods of active use. Although it is described as a chapel on several maps, there is no documentary or archaeological evidence to suggest that it had any religious function. A small hearth, probably used for smelting iron, is the only evidence of a specific activity on the site.

References

  1. 1 2 3 4 5 6 7 8 Arnott, Colin J. "Brief guide to Galleting" (PDF). Domestic Buildings Research Group. Retrieved 23 March 2012.
  2. Gillian Darley (1983). Built in Britain. George Weidenfeld and Nicolson Ltd. pp. 68, 144. ISBN   0-297-78312-2.
  3. 1 2 3 4 Trotter, W.R. (1991). "Galleting: An Addendum". Transactions of the Ancient Monuments Society. 35: 161–162.
  4. 1 2 Sharpe, Geoffrey R. (2011). Historic English Churches: A Guide to Their Construction, Design and Features. London: I.B. Tauris. pp. 41–44.
  5. 1 2 Sharpe, Geoffrey R. (2011). Traditional Buildings of the English Countryside: An Illustrated Guide. London: I.B. Tauris. p. 151.
  6. 1 2 "Galleting". The Oxford Companion to Family and Local History (2nd ed.). Oxford University Press. 2008. doi:10.1093/acref/9780199532988.001.0001. ISBN   978-0-19-953298-8 via Oxford Reference.
  7. "Gallet". A Dictionary of Architecture and Landscape Architecture (2nd ed.). Oxford University Press. 2006. doi:10.1093/acref/9780198606789.001.0001. ISBN   978-0-19-860678-9 via Oxford Reference.
  8. 1 2 3 4 5 6 7 8 Trotter, W.R. (1989). "Galleting". Transactions of the Ancient Monuments Society. 33: 153–168.
  9. 1 2 Pevsner, Nikolaus; Wilson, Bill (2002). The Buildings Of England Norfolk I: Norwich and North-East Norfolk. New Haven and London: Yale University Press. p. 22. ISBN   0300096070.
  10. 1 2 Sharpe, Geoffrey R. (2011). Historic English Churches: A Guide to Their Construction, Design and Features. London: I.B. Tauris. p. 252.
  11. Barraud, Ronald (January 28, 1971). "Correspondence: The Technique of Garreting". Country Life. 149: 194 via ProQuest.
  12. "Repair and maintenance of stone buildings". Spelthorne Council. Retrieved 23 March 2012
  13. McMurry, Sally; Van Dolsen, Nancy (2011). Architecture and Landscape of the Pennsylvania Germans, 1720-1920. Philadelphia: University of Pennsylvania Press. p. 95.
  14. 1 2 "Bradford Friends Meeting House (HABS PA,15-MARSH,3-)". Library of Congress, Prints and Photographs Division, Historic American Buildings Survey. Retrieved 4 December 2017.
  15. 1 2 "John Bartram House and Garden (HALS PA-1)". Library of Congress, Prints and Photographs Division, Historic American Buildings Survey. Retrieved 4 December 2017.
  16. 1 2 Acroterion (2012-05-20), English: Galleting (stones embedded in mortar) in an outbuilding at Hancock's Resolution, Anne Arundel County, Maryland, USA. , retrieved 2017-12-04
  17. 1 2 Rahway, Elizabeth Linden (2015-06-22), English: Galleting at north facade , retrieved 2017-12-04
  18. "FEEDBACK - Everything you should know about galleting". www.galleting.com. Retrieved 2017-11-13.