Gas in scattering media absorption spectroscopy

Last updated

Gas in scattering media absorption spectroscopy (GASMAS) is an optical technique for sensing and analysis of gas located within porous and highly scattering solids, e.g. powders, ceramics, wood, fruit, translucent packages, pharmaceutical tablets, foams, human paranasal sinuses etc. It was introduced in 2001 by Prof. Sune Svanberg and co-workers at Lund University (Sweden). [1] The technique is related to conventional high-resolution laser spectroscopy for sensing and spectroscopy of gas (e.g. tunable diode laser absorption spectroscopy, TDLAS), but the fact that the gas here is "hidden" inside solid materials give rise to important differences.

Contents

Basic Principles

Free gases exhibit very sharp spectral features, and different gas species have their own unique spectral fingerprints. At atmospheric pressure, absorption linewidths are typically on the order of 0.1 cm−1 (i.e. ~3 GHz in optical frequency or 0.006 nm in wavelength), while solid media have dull spectral behavior with absorption features thousand times wider. By looking for the sharp absorption imprints in light emerging from porous samples, it is thus possible to detect gases confined in solids – even though the solid often attenuates light much stronger than the gas itself.

The basic principle of GASMAS is shown in figure 1. Laser light is sent into a sample with gas cavities, which could either be small pores (left) or larger gas-filled chambers. The heterogeneous nature of the porous material often give rise to strong light scattering, and pathlengths are often surprisingly long (10 or 100 times the sample dimension are not uncommon). In addition, light will experience absorption related to the solid material. When travelling through the material, light will travel partly through the pores, and will thus experience the spectrally sharp gas absorption. Light leaving the material will carry this information, and can be collected by a detector either in a transmission mode (left) or in a reflection mode (right).

In order to detect the spectrally sharp fingerprints related to the gas, GASMAS has so far relied on high-resolution tunable diode laser absorption spectroscopy (TDLAS). In principle, this means that a nearly monochromatic (narrow-bandwidth) laser is scanned across an absorption line of the gas, and a detector records the transmission profile. In order to increase sensitivity, modulation techniques are often employed.

The strength of the gas absorption will depend, as given by the Beer-Lambert law, both on the gas concentration and the path-length that the light has travelled through the gas. In conventional TDLAS, the path-length is known and the concentration is readily calculated from the transmittance. In GASMAS, extensive scattering renders the pathlength unknown and the determination of gas concentration is aggravated. In many applications, however, the gas concentration is known and other parameters are in focus. Furthermore, as discussed in 2.2, there are complementing techniques that can provide information on the optical pathlength, thus allowing evaluation also of gas concentrations.

GasmasPrinciple2.pdf

Challenges

Diffuse light

Unknown interaction pathlength

Optical interference noise

It is well known that optical interference often is a major problem in laser-based gas spectroscopy. [2] [3] In conventional laser-based gas spectrometers, the optical interference originates from e.g. etalon-type interference effects in (or between) optical components and multi-pass gas cells. Throughout the years, great efforts have been devoted to handle this problem. Proper optical design is important to minimize interference from the beginning (e.g. by tilting optical components, avoiding transmissive optics and using anti-reflection coating), but interference patterns can not be completely avoided and are often difficult to separate from gas absorption. Since gas spectroscopy often involves measurement of small absorption fractions (down to 10−7), appropriate handling of interference is crucial. Utilised countermeasures include customized optical design, [4] tailored laser modulation, [5] mechanical dithering, [6] [7] [8] [9] signal post-processing, [10] sample modulation, [8] [11] [12] and baseline recording and interference subtraction. [13]

In the case of GASMAS, optical interference is particularly cumbersome. [14] This is related to the severe speckle-type interference that originates from the interaction between laser light and highly scattering solid materials. [9] Since this highly non-uniform interference is generated in same place as the utility signal, it cannot be removed by design. The optical properties of the porous material under study determines the interference pattern, and the level of interference is not seldom much stronger than actual gas absorption signals. Random mechanical dithering (e.g. laser beam dithering and/or sample rotation ) has been found effective in GASMAS. [9] [15] However, this approach converts stable interference into a random noise that must be averaged away, thus requiring longer acquisition times. Baseline recording and interference subtraction may be applicable in some GASMAS applications, as may other of the methods described above.

Applications

Medical diagnostics

See [16] [17]

Optical porosimetry

See [18]

Monitoring of drying processes

See [19]

Pharmaceutical applications

See [9] [15] [18]

Monitoring of food and food packaging

Much of the food that we consume today is put in a wide variety of packages to ensure food quality and provide a possibility for transportation and distribution. Many of these packages are air or gas tight, making it difficult to study the gas composition without perforation. In many cases it is of great value to study the composition of gases without destroying the package.

The perhaps best example is studies of the amount of oxygen in food packages. Oxygen is naturally present in most food and food packages as it is a major component in air. However, oxygen is also one of the great causes or needs for aging of biological substances, due to its source for increase of chemical and microbiological activity. Today, methods like [Modified atmosphere] (MAP) and [Controlled atmosphere] packaging (CAP) are implemented to reduce and control the oxygen content in food packages to prolong [shelf life] and ensure safe food. To assure the effectiveness of these methods it is important to regularly measure the concentration of oxygen (and other gases) inside these packages. GASMAS provides the possibility of doing this non-intrusively, without destroying any food or packages. The two main advantages of measuring the gas-composition in packages without perforation is that no food is wasted in the controlling process and that the same package can be controlled repeatedly during an extended time period to monitor any time-dependence of the gas composition. The studies can be used to guarantee the tightness of packages but also to study food deterioration processes.

Much food itself contains free gas distributed in pores within. Examples are fruit, bread, flour, beans, cheese, etc. Also this gas can be of great value to study to monitor quality and maturity level (see e.g. [20] and [21] ).

Spectroscopy of gas confined in nanoporous materials

See [22] [23] [24]

Related Research Articles

Tunable diode laser absorption spectroscopy is a technique for measuring the concentration of certain species such as methane, water vapor and many more, in a gaseous mixture using tunable diode lasers and laser absorption spectrometry. The advantage of TDLAS over other techniques for concentration measurement is its ability to achieve very low detection limits. Apart from concentration, it is also possible to determine the temperature, pressure, velocity and mass flux of the gas under observation. TDLAS is by far the most common laser based absorption technique for quantitative assessments of species in gas phase.

Cavity ring-down spectroscopy (CRDS) is a highly sensitive optical spectroscopic technique that enables measurement of absolute optical extinction by samples that scatter and absorb light. It has been widely used to study gaseous samples which absorb light at specific wavelengths, and in turn to determine mole fractions down to the parts per trillion level. The technique is also known as cavity ring-down laser absorption spectroscopy (CRLAS).

A fiber laser is a laser in which the active gain medium is an optical fiber doped with rare-earth elements such as erbium, ytterbium, neodymium, dysprosium, praseodymium, thulium and holmium. They are related to doped fiber amplifiers, which provide light amplification without lasing.

<span class="mw-page-title-main">Silicon photonics</span> Photonic systems which use silicon as an optical medium

Silicon photonics is the study and application of photonic systems which use silicon as an optical medium. The silicon is usually patterned with sub-micrometre precision, into microphotonic components. These operate in the infrared, most commonly at the 1.55 micrometre wavelength used by most fiber optic telecommunication systems. The silicon typically lies on top of a layer of silica in what is known as silicon on insulator (SOI).

<span class="mw-page-title-main">Supercontinuum</span>

In optics, a supercontinuum is formed when a collection of nonlinear processes act together upon a pump beam in order to cause severe spectral broadening of the original pump beam, for example using a microstructured optical fiber. The result is a smooth spectral continuum. There is no consensus on how much broadening constitutes a supercontinuum; however researchers have published work claiming as little as 60 nm of broadening as a supercontinuum. There is also no agreement on the spectral flatness required to define the bandwidth of the source, with authors using anything from 5 dB to 40 dB or more. In addition the term supercontinuum itself did not gain widespread acceptance until this century, with many authors using alternative phrases to describe their continua during the 1970s, 1980s and 1990s.

Photothermal spectroscopy is a group of high sensitivity spectroscopy techniques used to measure optical absorption and thermal characteristics of a sample. The basis of photothermal spectroscopy is the change in thermal state of the sample resulting from the absorption of radiation. Light absorbed and not lost by emission results in heating. The heat raises temperature thereby influencing the thermodynamic properties of the sample or of a suitable material adjacent to it. Measurement of the temperature, pressure, or density changes that occur due to optical absorption are ultimately the basis for the photothermal spectroscopic measurements.

Laser absorption spectrometry (LAS) refers to techniques that use lasers to assess the concentration or amount of a species in gas phase by absorption spectrometry (AS).

Noise-immune cavity-enhanced optical-heterodyne molecular spectroscopy (NICE-OHMS) is an ultra-sensitive laser-based absorption technique that utilizes laser light to assess the concentration or the amount of a species in gas phase by absorption spectrometry (AS).

<span class="mw-page-title-main">F. J. Duarte</span> Laser physicist and author/editor

Francisco Javier "Frank" Duarte is a laser physicist and author/editor of several books on tunable lasers.

Ultrasound-modulated optical tomography (UOT), also known as Acousto-Optic Tomography (AOT), is a hybrid imaging modality that combines light and sound; it is a form of tomography involving ultrasound. It is used in imaging of biological soft tissues and has potential applications for early cancer detection. As a hybrid modality which uses both light and sound, UOT provides some of the best features of both: the use of light provides strong contrast and sensitivity ; these two features are derived from the optical component of UOT. The use of ultrasound allows for high resolution, as well as a high imaging depth. However, the difficulty of tackling the two fundamental problems with UOT have caused UOT to evolve relatively slowly; most work in the field is limited to theoretical simulations or phantom / sample studies.

Fritz Peter Schäfer was a German physicist, born in Hersfeld, Hesse-Nassau. He is the co-inventor of the organic dye laser. His book, Dye Lasers, is considered a classic in the field of tunable lasers. In this book the chapter written by Schäfer gives an ample and insightful exposition on organic laser dye molecules in addition to a description on the physics of telescopic, and multiple-prism, tunable narrow-linewidth laser oscillators.

<span class="mw-page-title-main">Multipass spectroscopic absorption cells</span>

Multiple-pass or long path absorption cells are commonly used in spectroscopy to measure low-concentration components or to observe weak spectra in gases or liquids. Several important advances were made in this area beginning in the 1930s, and research into a wide range of applications continues to the present day.

Incoherent broad band cavity enhanced absorption spectroscopy (IBBCEAS), sometimes called broadband cavity enhanced extinction spectroscopy (IBBCEES), measures the transmission of light intensity through a stable optical cavity consisting of high reflectance mirrors (typically R>99.9%). The technique is realized using incoherent sources of radiation e.g. Xenon arc lamps, LEDs or supercontinuum (SC) lasers, hence the name.

Single-shot multi-contrast x-ray imaging is an efficient and a robust x-ray imaging technique which is used to obtain three different and complementary types of information, i.e. absorption, scattering, and phase contrast from a single exposure of x-rays on a detector subsequently utilizing Fourier analysis/technique. Absorption is mainly due to the attenuation and Compton scattering from the object, while phase contrast corresponds to phase shift of x-rays.

Time-domain diffuse optics or time-resolved functional near-infrared spectroscopy is a branch of functional near-Infrared spectroscopy which deals with light propagation in diffusive media. There are three main approaches to diffuse optics namely continuous wave (CW), frequency domain (FD) and time-domain (TD). Biological tissue in the range of red to near-infrared wavelengths are transparent to light and can be used to probe deep layers of the tissue thus enabling various in vivo applications and clinical trials.

<span class="mw-page-title-main">Coherent Raman scattering microscopy</span> Multi-photon microscopy technique

Coherent Raman scattering (CRS) microscopy is a multi-photon microscopy technique based on Raman-active vibrational modes of molecules. The two major techniques in CRS microscopy are stimulated Raman scattering (SRS) and coherent anti-Stokes Raman scattering (CARS). SRS and CARS were theoretically predicted and experimentally realized in the 1960s. In 1982 the first CARS microscope was demonstrated. In 1999, CARS microscopy using a collinear geometry and high numerical aperture objective were developed in Xiaoliang Sunney Xie's lab at Harvard University. This advancement made the technique more compatible with modern laser scanning microscopes. Since then, CRS's popularity in biomedical research started to grow. CRS is mainly used to image lipid, protein, and other bio-molecules in live or fixed cells or tissues without labeling or staining. CRS can also be used to image samples labeled with Raman tags, which can avoid interference from other molecules and normally allows for stronger CRS signals than would normally be obtained for common biomolecules. CRS also finds application in other fields, such as material science and environmental science.

<span class="mw-page-title-main">Tapered double-clad fiber</span>

A tapered double-clad fiber (T-DCF) is a double-clad optical fiber which is formed using a specialised fiber drawing process, in which temperature and pulling forces are controlled to form a taper along the length of the fiber. By using pre-clad fiber preforms both the fiber core and the inner and outer cladding layers vary in diameter and thickness along the full length of the fiber. This tapering of the fiber enables the combination of the characteristics of conventional 8–10 μm diameter double-clad single-mode fibers to propagate light in fundamental mode with those of larger diameter (50–100 μm) double-clad multi-mode fibers used for optical amplification and lasing. The result is improved maintenance of pulse fidelity compared to conventional consistent diameter fiber amplifiers. By virtue of the large cladding diameter T-DCF can be pumped by optical sources with very poor brightness factor such as laser diode bars or even VECSELs matrices, significantly reducing the cost of fiber lasers/amplifiers.

<span class="mw-page-title-main">Debabrata Goswami</span> Indian chemist

Debabrata Goswami FInstP FRSC, is an Indian chemist and the Prof. S. Sampath Chair Professor of Chemistry, at the Indian Institute of Technology Kanpur. He is also a professor of The Department of Chemistry and The Center for Lasers & Photonics at the same Institute. Goswami is an associate editor of the open-access journal Science Advances. He is also an Academic Editor for PLOS One and PeerJ Chemistry. He has contributed to the theory of Quantum Computing as well as nonlinear optical spectroscopy. His work is documented in more than 200 research publications. He is an elected Fellow of the Royal Society of Chemistry, Fellow of the Institute of Physics, the SPIE, and The Optical Society. He is also a Senior Member of the IEEE, has been awarded a Swarnajayanti Fellowship for Chemical Sciences, and has held a Wellcome Trust Senior Research Fellowship. He is the third Indian to be awarded the International Commission for Optics Galileo Galilei Medal for excellence in optics.

<span class="mw-page-title-main">Luc Thévenaz</span> Swiss physicist who specializes in fibre optics

Luc Thévenaz is a Swiss physicist who specializes in fibre optics. He is a professor of physics at EPFL and the head of the Group for Fibre Optics School of Engineering.

Katarina Svanberg is a Swedish physician who is Professor and Chief Consultant of Oncology at the Skåne University Hospital. Her research considers the use of fluorescence-based tumour imaging and photodynamic therapy. She served as President of SPIE in 2011 and was awarded the SPIE Gold Medal in 2017.

References

  1. ↑ Sjöholm, M.; Somesfalean, G.; Alnis, J.; Andersson-Engels, S.; Svanberg, S. (2001-01-01). "Analysis of gas dispersed in scattering media". Optics Letters. 26 (1). The Optical Society: 16–8. Bibcode:2001OptL...26...16S. doi:10.1364/ol.26.000016. ISSN   0146-9592. PMID   18033492.
  2. ↑ Silver, Joel A. (1992-02-20). "Frequency-modulation spectroscopy for trace species detection: theory and comparison among experimental methods". Applied Optics. 31 (6). The Optical Society: 707–17. Bibcode:1992ApOpt..31..707S. doi:10.1364/ao.31.000707. ISSN   0003-6935. PMID   20720674.
  3. ↑ Svensson, Tomas (2008). "Fighting optical interference" (PDF). Pharmaceutical and Biomedical Applications of Spectroscopy in the Photon Migration Regime (PhD thesis). Lund University, Sweden. Sect. 4.3.4.
  4. ↑ McManus, J. Barry; Kebabian, Paul L. (1990-03-01). "Narrow optical interference fringes for certain setup conditions in multipass absorption cells of the Herriott type". Applied Optics. 29 (7). The Optical Society: 898–900. Bibcode:1990ApOpt..29..898M. doi:10.1364/ao.29.000898. ISSN   0003-6935. PMID   20562931.
  5. ↑ Reid, J.; El-Sherbiny, M.; Garside, B. K.; Ballik, E. A. (1980-10-01). "Sensitivity limits of a tunable diode laser spectrometer, with application to the detection of NO2 at the 100-ppt level". Applied Optics. 19 (19). The Optical Society: 3349–53. Bibcode:1980ApOpt..19.3349R. doi:10.1364/ao.19.003349. ISSN   0003-6935. PMID   20234619.
  6. ↑ Webster, Christopher R. (1985-09-01). "Brewster-plate spoiler: a novel method for reducing the amplitude of interference fringes that limit tunable-laser absorption sensitivities". Journal of the Optical Society of America B. 2 (9). The Optical Society: 1464–1470. Bibcode:1985JOSAB...2.1464W. doi:10.1364/josab.2.001464. ISSN   0740-3224.
  7. ↑ Silver, Joel A.; Stanton, Alan C. (1988-05-15). "Optical interference fringe reduction in laser absorption experiments". Applied Optics. 27 (10). The Optical Society: 1914–6. Bibcode:1988ApOpt..27.1914S. doi:10.1364/ao.27.001914. ISSN   0003-6935. PMID   20531678.
  8. 1 2 Fried, Alan; Drummond, James R.; Henry, Bruce; Fox, Jack (1990-03-01). "Reduction of interference fringes in small multipass absorption cells by pressure modulation". Applied Optics. 29 (7). The Optical Society: 900–2. Bibcode:1990ApOpt..29..900F. doi:10.1364/ao.29.000900. ISSN   0003-6935. PMID   20562932.
  9. 1 2 3 4 Svensson, Tomas; Andersson, Mats; Rippe, Lars; Johansson, Jonas; Folestad, Staffan; Andersson-Engels, Stefan (2007-12-21). "High sensitivity gas spectroscopy of porous, highly scattering solids". Optics Letters. 33 (1). The Optical Society: 80–2. doi:10.1364/ol.33.000080. ISSN   0146-9592. PMID   18157265.
  10. ↑ Riris, Haris; Carlisle, Clinton B.; Warren, Russell E.; Cooper, David E. (1994-01-15). "Signal-to-noise ratio enhancement in frequency-modulation spectrometers by digital signal processing". Optics Letters. 19 (2). The Optical Society: 144–146. Bibcode:1994OptL...19..144R. doi:10.1364/ol.19.000144. ISSN   0146-9592. PMID   19829572.
  11. ↑ Liger, Vladimir; Zybin, Alexander; Kuritsyn, Yurii; Niemax, Kay (1997). "Diode-laser atomic-absorption spectrometry by the double-beam—double-modulation technique". Spectrochimica Acta Part B: Atomic Spectroscopy. 52 (8). Elsevier BV: 1125–1138. Bibcode:1997AcSpe..52.1125L. doi:10.1016/s0584-8547(97)00029-3. ISSN   0584-8547.
  12. ↑ Werle, P.; Lechner, S. (1999). "Stark-modulation-enhanced FM-spectroscopy". Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy. 55 (10). Elsevier BV: 1941–1955. Bibcode:1999AcSpA..55.1941W. doi:10.1016/s1386-1425(99)00067-0. ISSN   1386-1425.
  13. ↑ Werle, P.; Mücke, R.; Slemr, F. (1993). "The limits of signal averaging in atmospheric trace-gas monitoring by tunable diode-laser absorption spectroscopy (TDLAS)". Applied Physics B: Photophysics and Laser Chemistry. 57 (2). Springer Science and Business Media LLC: 131–139. Bibcode:1993ApPhB..57..131W. doi:10.1007/bf00425997. ISSN   0721-7269. S2CID   120472037.
  14. ↑ Svensson, Tomas (2008). "Gas in scattering media absorption spectroscopy" (PDF). Pharmaceutical and Biomedical Applications of Spectroscopy in the Photon Migration Regime (PhD thesis). Lund University, Sweden. Ch. 5.
  15. 1 2 Svensson, T.; Andersson, M.; Rippe, L.; Svanberg, S.; Andersson-Engels, S.; Johansson, J.; Folestad, S. (2008-01-18). "VCSEL-based oxygen spectroscopy for structural analysis of pharmaceutical solids". Applied Physics B. 90 (2). Springer Science and Business Media LLC: 345–354. Bibcode:2008ApPhB..90..345S. doi:10.1007/s00340-007-2901-6. ISSN   0946-2171. S2CID   123165703.
  16. ↑ Persson, Linda; Andersson, Mats; Cassel-Engquist, Märta; Svanberg, Katarina; Svanberg, Sune (2007). "Gas monitoring in human sinuses using tunable diode laser spectroscopy". Journal of Biomedical Optics. 12 (5). SPIE-Intl Soc Optical Eng: 054001. Bibcode:2007JBO....12e4001P. doi: 10.1117/1.2777189 . ISSN   1083-3668. PMID   17994889. S2CID   46590102.
  17. ↑ Lewander, Märta; Guan, Zuguang; Svanberg, Katarina; Svanberg, Sune; Svensson, Tomas (2009-06-15). "Clinical system for non-invasive in situ monitoring of gases in the human paranasal sinuses". Optics Express. 17 (13). The Optical Society: 10849–63. Bibcode:2009OExpr..1710849L. doi: 10.1364/oe.17.010849 . ISSN   1094-4087. PMID   19550485.
  18. 1 2 Svensson, Tomas; Alerstam, Erik; Johansson, Jonas; Andersson-Engels, Stefan (2010-05-17). "Optical porosimetry and investigations of the porosity experienced by light interacting with porous media". Optics Letters. 35 (11). The Optical Society: 1740–2. Bibcode:2010OptL...35.1740S. doi:10.1364/ol.35.001740. ISSN   0146-9592. PMID   20517400.
  19. ↑ Andersson, Mats; Persson, Linda; Sjöholm, Mikael; Svanberg, Sune (2006). "Spectroscopic studies of wood-drying processes". Optics Express. 14 (8). The Optical Society: 3641–53. Bibcode:2006OExpr..14.3641A. doi: 10.1364/oe.14.003641 . ISSN   1094-4087. PMID   19516511.
  20. ↑ L. Persson, B. Anderson, M. Andersson, M. Sjöholm and S. Svanberg, "Studies of Gas Exchange in Fruits Using Laser Spectroscopic Techniques ", FRUITIC-05, Symposium on Information and Technology for Sustainable Fruit and Vegetable Production (2005).
  21. ↑ Lewander, M.; Guan, Z. G.; Persson, L.; Olsson, A.; Svanberg, S. (2008-09-30). "Food monitoring based on diode laser gas spectroscopy". Applied Physics B. 93 (2–3). Springer Science and Business Media LLC: 619–625. Bibcode:2008ApPhB..93..619L. doi:10.1007/s00340-008-3192-2. ISSN   0946-2171. S2CID   73566631.
  22. ↑ Svensson, Tomas; Shen, Zhijian (2010-01-11). "Laser spectroscopy of gas confined in nanoporous materials". Applied Physics Letters. 96 (2): 021107. arXiv: 0907.5092 . Bibcode:2010ApPhL..96b1107S. doi:10.1063/1.3292210. ISSN   0003-6951. S2CID   53705149.
  23. ↑ Svensson, Tomas; Lewander, Märta; Svanberg, Sune (2010-07-21). "Laser absorption spectroscopy of water vapor confined in nanoporous alumina: wall collision line broadening and gas diffusion dynamics". Optics Express. 18 (16). The Optical Society: 16460–73. Bibcode:2010OExpr..1816460S. doi: 10.1364/oe.18.016460 . ISSN   1094-4087. PMID   20721033.
  24. ↑ Yang, Lin; Somesfalean, Gabriel; He, Sailing (2014-01-29). "Laser absorption spectroscopy of oxygen confined in highly porous hollow sphere xerogel". Optics Express. 22 (3). The Optical Society: 2584–94. Bibcode:2014OExpr..22.2584Y. doi: 10.1364/OE.22.002584 . ISSN   1094-4087. PMID   24663551.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.