Glass battery

Last updated

The glass battery is a type of solid-state battery. It uses a glass electrolyte and lithium or sodium metal electrodes. [1] [2] [3] [4] [5]

Contents


Development History

The battery was invented by John B. Goodenough, inventor of the lithium cobalt oxide and lithium iron phosphate electrode materials used in the lithium-ion battery (Li-ion), and Maria H. Braga, an associate professor at the University of Porto [6] and a senior research fellow at Cockrell School of Engineering at The University of Texas. [1] [3]

The paper describing the battery was published in Energy & Environmental Science in December 2016; [7] a number of follow-up works have also been published since. [8] Hydro-Québec is researching the battery for possible production. [9]

Glass Electrolyte Research

In September 2016 Iowa State University was granted U.S. $1.6 million to develop new lithium-ion-conducting glassy solid electrolytes. [10] In August 2019, it was announced that GM was awarded U.S. $2 million by the United States Department of Energy for research into the "fundamental understanding of interfacial phenomena in solid-state batteries" and "hot pressing of reinforced all-solid-state batteries with sulfide glass electrolyte." [11]

Skepticism and Reaction to Skepticism

The initial publication in December 2016 was met with considerable skepticism by other researchers in battery technology, with several noting that it is unclear how a battery voltage is obtained given that pure metallic lithium or sodium exists on both electrodes, which should not produce a difference in electrochemical potential, and therefore give no cell voltage. [4] Any energy stored or released by the battery would therefore violate the first law of thermodynamics. Goodenough's high reputation was enough to deter the strongest criticism however, with Daniel Steingart of Princeton University commenting, "If anyone but Goodenough published this, I would be, well, it's hard to find a polite word." [4] A formal comment was published by Steingart and Venkat Viswanathan from Carnegie Mellon University in Energy & Environmental Science. [12]

Goodenough responded to the skepticism, stating: "The answer is that if the lithium plated on the cathode current collector is thin enough for its reaction with the current collector to have its Fermi energy lowered to that of the current collector, the Fermi energy of the lithium anode is higher than that of the thin lithium plated on the cathode current collector." Goodenough went on to say in a later interview with Slashdot that the lithium plated on the cathode is on the "order of a micron thick". [13]

Goodenough's response has drawn further skepticism from Daniel Steingart and also Matthew Lacey of Uppsala University, who point out that this underpotential deposition effect is only known for extremely thin layers (monolayers) of materials. [14] [15] Lacey also notes that the original publication does not mention a limit to the thickness of the lithium plated on the cathode, but instead states the opposite: that the capacity of the cell is "determined by the amount of alkali metal used as the anode". [7]

Construction and electrochemistry

The battery, as reported in the original publication, [7] is constructed using an alkali metal (lithium or sodium foil) as the negative electrode (anode), and a mixture of carbon and a redox active component, as the positive electrode (cathode). The cathode mixture is coated onto copper foil. The redox active component is either sulfur, ferrocene, or manganese dioxide. The electrolyte is a highly conductive glass formed from lithium hydroxide and lithium chloride and doped with barium, allowing fast charging of the battery without the formation of metal dendrites. [2]

The publication states the battery operates during discharge by stripping the alkali metal from the anode and re-depositing it at the cathode, with the battery voltage determined by the redox active component and the capacity of the battery determined by the amount of the alkali metal anode. This operating mechanism is radically different from the insertion (intercalation) mechanism of most conventional Li-ion battery materials.

In 2018, a new version was described by most of the same authors in the Journal of the American Chemical Society , in which the cathode is coated with a special plasticiser solution to avoid interface cracking as different materials expand at different rates. Braga says the new battery has twice the energy density of conventional lithium ion batteries, and can be recharged 23,000 times. [16] [17] [18] Critics pointed out several extraordinary claims in the paper, such as a record-high relative dielectric constant; perhaps higher than any material recorded, and a raise in the capacitance of the battery over many charge cycles, rather than a decrease as is usually the case with all other battery technologies. [18] [17] The paper was also not clear if the battery could hold its charge after it is unplugged, which would clarify whether it is really a new battery technology, or simply a capacitor. [18] Braga responded to critics, saying "Data is data, and we have similar data from many different cells, in four different instruments, different labs, glove box. And at the end of the day, the LEDs are lit for days with a very small amount of active material after having cycled for more than 23,000 times". [18] [17]

Comparison with lithium-ion batteries

Braga and Goodenough stated they expect the battery to have an energy density many times higher than current lithium-ion batteries, as well as an operating temperature range down to −20 °C (−4 °F); much lower than current solid-state batteries. [1] [4] [3] [7] The electrolyte is also stated to have a wide electrochemical window. [19] The battery's design is safer than lithium-ion batteries, as the use of a flammable liquid electrolyte is avoided. [2] [3] The battery can also be made using low-cost sodium instead of lithium. [2]

The authors claim the battery has a much shorter charging time than Li-ion batteries—in minutes rather than hours. The authors also state they tested the stability of the alkali metal/electrolyte interface over 1,200 charge cycles with low cell resistance; [1] the specification for Li-ion batteries is usually less than a thousand. [20] [21]

See also

Related Research Articles

<span class="mw-page-title-main">Electrochemical cell</span> Electro-chemical device

An electrochemical cell is a device that generates electrical energy from chemical reactions. Electrical energy can also be applied to these cells to cause chemical reactions to occur. Electrochemical cells that generate an electric current are called voltaic or galvanic cells and those that generate chemical reactions, via electrolysis for example, are called electrolytic cells.

<span class="mw-page-title-main">Lithium-ion battery</span> Rechargeable battery type

A lithium-ion or Li-ion battery is a type of rechargeable battery that uses the reversible intercalation of Li+ ions into electronically conducting solids to store energy. In comparison with other commercial rechargeable batteries, Li-ion batteries are characterized by higher specific energy, higher energy density, higher energy efficiency, a longer cycle life, and a longer calendar life. Also noteworthy is a dramatic improvement in lithium-ion battery properties after their market introduction in 1991: within the next 30 years, their volumetric energy density increased threefold while their cost dropped tenfold.

<span class="mw-page-title-main">John B. Goodenough</span> American materials scientist (1922–2023)

John Bannister Goodenough was an American materials scientist, a solid-state physicist, and a Nobel laureate in chemistry. From 1996 he was a professor of Mechanical, Materials Science, and Electrical Engineering at the University of Texas at Austin. He is credited with identifying the Goodenough–Kanamori rules of the sign of the magnetic superexchange in materials, with developing materials for computer random-access memory and with inventing cathode materials for lithium-ion batteries.

<span class="mw-page-title-main">Molten-salt battery</span> Type of battery that uses molten salts

Molten-salt batteries are a class of battery that uses molten salts as an electrolyte and offers both a high energy density and a high power density. Traditional non-rechargeable thermal batteries can be stored in their solid state at room temperature for long periods of time before being activated by heating. Rechargeable liquid-metal batteries are used for industrial power backup, special electric vehicles and for grid energy storage, to balance out intermittent renewable power sources such as solar panels and wind turbines.

A polymer-based battery uses organic materials instead of bulk metals to form a battery. Currently accepted metal-based batteries pose many challenges due to limited resources, negative environmental impact, and the approaching limit of progress. Redox active polymers are attractive options for electrodes in batteries due to their synthetic availability, high-capacity, flexibility, light weight, low cost, and low toxicity. Recent studies have explored how to increase efficiency and reduce challenges to push polymeric active materials further towards practicality in batteries. Many types of polymers are being explored, including conductive, non-conductive, and radical polymers. Batteries with a combination of electrodes are easier to test and compare to current metal-based batteries, however batteries with both a polymer cathode and anode are also a current research focus. Polymer-based batteries, including metal/polymer electrode combinations, should be distinguished from metal-polymer batteries, such as a lithium polymer battery, which most often involve a polymeric electrolyte, as opposed to polymeric active materials.

<span class="mw-page-title-main">Nanobatteries</span> Type of battery

Nanobatteries are fabricated batteries employing technology at the nanoscale, particles that measure less than 100 nanometers or 10−7 meters. These batteries may be nano in size or may use nanotechnology in a macro scale battery. Nanoscale batteries can be combined to function as a macrobattery such as within a nanopore battery.

<span class="mw-page-title-main">Lithium-ion capacitor</span> Hybrid type of capacitor

A lithium-ion capacitor is a hybrid type of capacitor classified as a type of supercapacitor. It is called a hybrid because the anode is the same as those used in lithium-ion batteries and the cathode is the same as those used in supercapacitors. Activated carbon is typically used as the cathode. The anode of the LIC consists of carbon material which is often pre-doped with lithium ions. This pre-doping process lowers the potential of the anode and allows a relatively high output voltage compared to other supercapacitors.

<span class="mw-page-title-main">Solid-state battery</span> Battery with solid electrodes and a solid electrolyte

A solid-state battery is an electrical battery that uses a solid electrolyte to conduct ion movements between the electrodes, instead of the liquid or polymer gel electrolytes found in conventional batteries. Solid-state batteries theoretically offer much higher energy density than the typical lithium-ion or lithium polymer batteries.

The lithium–air battery (Li–air) is a metal–air electrochemical cell or battery chemistry that uses oxidation of lithium at the anode and reduction of oxygen at the cathode to induce a current flow.

A metal–air electrochemical cell is an electrochemical cell that uses an anode made from pure metal and an external cathode of ambient air, typically with an aqueous or aprotic electrolyte.

A potassium-ion battery or K-ion battery is a type of battery and analogue to lithium-ion batteries, using potassium ions for charge transfer instead of lithium ions. It was invented by the Iranian/American chemist Ali Eftekhari in 2004.

<span class="mw-page-title-main">Sodium-ion battery</span> Type of rechargeable battery

Sodium-ion batteries (NIBs, SIBs, or Na-ion batteries) are several types of rechargeable batteries, which use sodium ions (Na+) as its charge carriers. In some cases, its working principle and cell construction are similar to those of lithium-ion battery (LIB) types, but it replaces lithium with sodium as the intercalating ion. Sodium belongs to the same group in the periodic table as lithium and thus has similar chemical properties. Although, in some cases (such as aqueous Na-ion batteries) they are quite different from Li-ion batteries.

<span class="mw-page-title-main">Peter Bruce</span> British chemist

Sir Peter George Bruce, is a British chemist, and Wolfson Professor of Materials in the Department of Materials at the University of Oxford. Between 2018 and 2023, he served as Physical Secretary and Vice President of the Royal Society. Bruce is a founder and Chief Scientist of the Faraday Institution.

Aluminium-ion batteries are a class of rechargeable battery in which aluminium ions serve as charge carriers. Aluminium can exchange three electrons per ion. This means that insertion of one Al3+ is equivalent to three Li+ ions. Thus, since the ionic radii of Al3+ (0.54 Å) and Li+ (0.76 Å) are similar, significantly higher numbers of electrons and Al3+ ions can be accepted by cathodes with little damage. Al has 50 times (23.5 megawatt-hours m-3) the energy density of Li and is even higher than coal.

Research in lithium-ion batteries has produced many proposed refinements of lithium-ion batteries. Areas of research interest have focused on improving energy density, safety, rate capability, cycle durability, flexibility, and cost.

<span class="mw-page-title-main">NASICON</span>

NASICON is an acronym for sodium (Na) super ionic conductor, which usually refers to a family of solids with the chemical formula Na1+xZr2SixP3−xO12, 0 < x < 3. In a broader sense, it is also used for similar compounds where Na, Zr and/or Si are replaced by isovalent elements. NASICON compounds have high ionic conductivities, on the order of 10−3 S/cm, which rival those of liquid electrolytes. They are caused by hopping of Na ions among interstitial sites of the NASICON crystal lattice.

Magnesium batteries are batteries that utilize magnesium cations as charge carriers and possibly in the anode in electrochemical cells. Both non-rechargeable primary cell and rechargeable secondary cell chemistries have been investigated. Magnesium primary cell batteries have been commercialised and have found use as reserve and general use batteries.

<span class="mw-page-title-main">Maria Helena Braga</span>

Maria Helena Sousa Soares de Oliveira Braga is an associate professor at the Engineering Physics Department of University of Porto, Portugal. She is currently focused on research areas in Materials Science and Materials Engineering at University of Porto and University of Texas at Austin. She is credited with expanding the understanding of glass electrolyte and glass batteries with colleague John B. Goodenough. Braga is a senior research fellow in the Materials Institute headed by Goodenough.

A solid-state silicon battery or silicon-anode all-solid-state battery is a type of rechargeable lithium-ion battery consisting of a solid electrolyte, solid cathode, and silicon-based solid anode.

<span class="mw-page-title-main">History of the lithium-ion battery</span> Overview of the events of the development of lithium-ion battery

This is a history of the lithium-ion battery.

References

  1. 1 2 3 4 "Lithium-Ion Battery Inventor Introduces New Technology for Fast-Charging, Noncombustible Batteries". University of Texas News. 28 February 2017. Retrieved 22 March 2017.
  2. 1 2 3 4 Morris, David (6 March 2017). "Lithium-Ion Pioneer Introduces New Battery That's Three Times Better". Fortune. Retrieved 23 March 2017.
  3. 1 2 3 4 Conca, James (17 March 2017). "The Beguiling Promise Of John Goodenough's New Battery Technology". Forbes . Forbes. Retrieved 21 March 2017.
  4. 1 2 3 4 LeVene, Steve (20 March 2017). "Has lithium-battery genius John Goodenough done it again? Colleagues are skeptical". Quartz. Retrieved 21 March 2017.
  5. ↑ Tirone, Johnathan (15 March 2017). "Google's Schmidt Flags Promise in New Goodenough Battery". Bloomberg News . Bloomberg. Retrieved 21 March 2017.
  6. ↑ "FEUP - Helena Braga".
  7. 1 2 3 4 Braga, M.H.; Grundish, N.S.; Murchison, A.J.; Goodenough, J.B. (9 December 2016). "Alternative strategy for a safe rechargeable battery". Energy & Environmental Science. 10: 331–336. doi: 10.1039/C6EE02888H .
  8. ↑ Sakai, M. (2023). "Cathode reaction models for Braga-Goodenough Na-ferrocene and Li-MnO2 rechargeable batteries". Journal of Electrochemical Science and Engineering. 13 (4): 687–711. doi: 10.5599/jese.1704 .
  9. ↑ "Full Page Reload". IEEE Spectrum: Technology, Engineering, and Science News. 24 February 2020. Retrieved 6 March 2020.
  10. ↑ "Strong, High Li+ Ion Conductivity, Li-Impermeable Thin-Ribbon Glassy Solid Electrolytes". Advanced Research Projects Agency - Energy. 13 September 2016. Archived from the original on 27 April 2017.
  11. ↑ Szymkowski, Sean. "US awards General Motors $2 million for solid-state battery research". Roadshow. Retrieved 18 August 2019.
  12. ↑ Steingart, Daniel A.; Viswanathan, Venkatasubramanian (17 January 2018). "Comment on "Alternative strategy for a safe rechargeable battery" by M. H. Braga, N. S. Grundish, A. J. Murchison and J. B. Goodenough, Energy Environ. Sci., 2017, 10, 331–336". Energy & Environmental Science. 11 (1): 221–222. doi:10.1039/C7EE01318C. ISSN   1754-5706.
  13. ↑ "The Slashdot Interview With Lithium-Ion Battery Inventor John B. Goodenough - Slashdot". hardware.slashdot.org. 19 April 2017. Retrieved 21 June 2017.
  14. ↑ Steingart, Dan (4 March 2017). "Redox without Redox". the unfortunate tetrahedron. Retrieved 21 June 2017.
  15. ↑ "On the skepticism surrounding the "Goodenough battery" · Matt Lacey". lacey.se. 28 March 2017. Retrieved 21 June 2017.
  16. ↑ Braga, Maria Helena; M Subramaniyam, Chandrasekar; Murchison, Andrew J.; Goodenough, John B. (24 April 2018). "Nontraditional, Safe, High Voltage Rechargeable Cells of Long Cycle Life". Journal of the American Chemical Society. 140 (20): 6343–6352. doi:10.1021/jacs.8b02322. PMID   29688709. S2CID   13660262.
  17. 1 2 3 "The Solid-State Lithium-Ion Battery — Has John Goodenough Finally Done It?". CleanTechnica . 26 June 2018. Retrieved 6 December 2018.
  18. 1 2 3 4 LeVine, Steve (3 June 2018). "Battery pioneer unveils surprising new breakthrough". Axios. Retrieved 6 December 2018.
  19. ↑ Braga, M. H.; Ferreira, J. A.; Stockhausen, V.; Oliveira, J. E.; El-Azab, A. (18 March 2014). "Novel Li3ClO based glasses with superionic properties for lithium batteries". Journal of Materials Chemistry A. 2 (15): 5470–5480. doi:10.1039/c3ta15087a. hdl: 10400.9/2664 . ISSN   2050-7496.
  20. ↑ Tim De Chant, "Super-Safe Glass Battery Charges in Minutes, Not Hours", NovaNext, 17 March 2017.
  21. ↑ Mark Anderson, "Will a New Glass Battery Accelerate the End of Oil?", IEEE Spectrum , 3 March 2017
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.