Graiseley Electric Vehicles

Last updated

Diamond Motors Ltd
Graiseley Electric Vehicles
IndustryCommercial Vehicles
Founded1930s
Defunctearly 1960s
FateBankrupt
SuccessorGraiseley Lister
Headquarters Wolverhampton, England
Products Milk float
Footnotes /references

Many Graiseley vehicles were classified by their payload, which was measured in hundredweights, and this usage has been retained in the article. A hundredweight is one twentieth of a long ton or 51kg, and is abbreviated to "cwt".

Contents

Graiseley Electric Vehicles were produced by the British company Diamond Motors Ltd of Wolverhampton. They had previously made motor cycles, but began producing battery-electric road vehicles (BERV) in the mid 1930s. They were best known for their three-wheeled pedestrian controlled vehicles, although they also produced conventional four-wheeled milk floats, and later manufactured industrial trucks. The company went into liquidation in the early 1960s, although the marque was used by two other companies until at least 1972.

History

Diamond Motors Ltd were based in Wolverhampton, and made motor cycles. Another Wolverhampton-based manufacturer of motorcycles, AJS filed for voluntary liquidation. AJS also made sidecars, and Walter Vincent Ford, the managing director of Diamond Motors, was approached with a view to buying the sidecar business from AJS. They paid £475, and this price included the Graiseley trademark. They continued to make Graiseley sidecars for a number of former AJS customers, but after a downturn in 1933, ceased to make their own motorcycles. [1]

The company moved to new premises on Upper Villiers Street, Wolverhampton, in 1935, and began producing pedestrian controlled milk trucks, which were marketed with the Graiseley marque. They soon found that they could sell into other industries, and the vehicles were used in hospitals, factories and warehouses. [1]

In January 1937, Diamond Motors produced their first battery-electric road vehicle, a four-wheeled van with the cab in front of the front wheels, suitable for a payload of 8-10 cwt. The frame, which was made from 3.5-inch (89 mm) channel with tube and channel cross members, had a lower section for the cab floor, which was just 13 inches (330 mm) above the ground, to provide easy access for a roundsman. The vehicle was fitted with a 3.5 hp (2.6 kW) motor manufactured by the Electric Power Engineering Co., and powered from a 60-volt battery. Standard 162 Amp-hour batteries gave a top speed of 16 to 18 miles per hour (26 to 29 km/h) and a range of around 35 miles (56 km), but a larger range was available by fitting 216 Amp-hour batteries. A press statement announced that this was the first in a series of vehicles which would be produced by the company, and further details of other models would be announced soon afterwards. [2]

A diagram of the Graiseley 3-wheeled pedestrian controlled battery-electric chassis dating from around 1938. The diagram was part of the application for patent no. 504604. Graiseley Patent 503604.jpg
A diagram of the Graiseley 3-wheeled pedestrian controlled battery-electric chassis dating from around 1938. The diagram was part of the application for patent no. 504604.

Commercial Motor carried a review of the Graiseley PCV in 1940, which stated that this model had been in service with commercial operators, including bakeries and dairies, for two years. [3] It came with a 0.75 hp (0.56 kW) motor, and was designed to travel at 3 miles per hour (4.8 km/h), with a range of 8 to 10 miles (13 to 16 km) on normal door-to-door delivery work. It could be supplied as a flat platform truck, with an open body suitable for milk delivery, or as a closed van, suitable for delivering bread. The motor, gearbox and an automatic clutch were mounted on the single front wheel forks. A chain formed part of the final drive. [4] The control system included a contactor manufactured by British Thompson-Houston, and the centrifugal drum clutch was designed to engage when the motor reached 250 revs per minute, providing a smooth start without the need for starting resistors. [3] The three-wheeled PCV was produced in three sizes, the Model 60, with a payload of 8-10 cwt, the Model 75, with a 12-15 cwt payload, and the Model 90, which could carry 22 cwt. Because the primary focus was on the dairy industry, the model numbers represented the number of imperial gallons of milk that could be carried. [5]

In 1945, Batley education committee bought a Graiseley for the delivery of cooked foods, particularly soup, pastries and puddings, to schools. The three-wheeled PCV was powered by a 0.75 hp (0.56 kW) motor and a 24-volt battery. The motor drove the front wheel through a reduction gearbox and chain. A tubular column at the front of the vehicle allowed it to be steered, and pushing it downwards applied the brakes. A separate hand-brake was also fitted, and the single front wheel was mounted so that it could be turned through a wide angle, giving exceptional manoeuvrability. [6]

Between 1948 and 1952, the company sold a large number of Graiseley PCVs to United Dairies. [5] In 1953 they demonstrated a stillage truck at the Factory Equipment Exhibition in London. It had a 2 hp (1.5 kW) motor, and two speeds. The platform, which was 6 inches (150 mm) above ground level, could be raised to 9 inches (230 mm). [7] They also showed battery electric road vehicles at an exhibition organised by the South Eastern Electricity Board and the Electric Vehicle Association. [8] In 1954 they added another stillage truck, the XL1, to their range, showcasing it at the Mechanical Handling Exhibition at Olympia. [9] They showcased their GP20 pedestrial controlled pallet truck at the same exhibition two years later. [10] Manufacture of the vehicles ceased at Wolverhampton around 1960, when Diamond Motors were liquidated. [1]

Acquisition

Graiseley were listed in Commercial Motor's directory of vehicle manufacturers in 1960, [11] but in 1969, when two Graiseley trucks were exhibited at the Materials Handling Exhibition, held in the Kelvin Hall, Glasgow, the manufacturer was called Lister Graiseley. [12] By 1971, Graiseley vehicles were manufactured by Gough Industrial Trucks Ltd of Hanley, Stoke-on-Trent. They were listed as producing pedestrian operated refuse trucks, hospital service vehicles, and industrial trucks. [13]

Preservation

There are at least three Graiseley vehicles still in existence. The first is a 1950 built Model 90, originally supplied to groceries shop A.G.Braddon of Sidcup and is currently under restoration at the Black Country Living Museum in Dudley. The second is a 1951/52 Model 90 which was supplied to United Dairies in London and carried the registration number XMP 457. In the early 1960s, when United Dairies were scrapping PCVs in favour of ride-on milk floats, this one was overhauled and repainted, to be transferred to a cheese manufactory at Swepstone, Leicestershire run by Wilts United Dairies. It was used for internal transport within the facility until its closure in 1975. The works manager, Walter Grewcock, bought it and parked it in his garden, where it rested until 2001, when his son donated it to The Transport Museum, Wythall. It was moved to the museum in January 2002, and was put on display in June 2006 after a thorough restoration. [5] The third is a PCV float which is on display at the Atwell-Wilson Motor Museum, Calne, Wiltshire. It was owned by Calne Dairies and carries the registration number OPP 886. [14] The registration number indicates that it was first registered between July 1951 and July 1952 in Buckinghamshire. [15]

Bibliography

Related Research Articles

<span class="mw-page-title-main">Milk float</span> Vehicle for delivering milk

A milk float is a vehicle specifically designed for the delivery of fresh milk. Today, milk floats are usually battery electric vehicles (BEV), but they were formerly horse-drawn floats. They were once common in many European countries, particularly the United Kingdom, and were operated by local dairies. However, in recent years, as the number of supermarkets, small independent grocers and petrol stations, and convenience stores stocking fresh milk has increased, many people have switched from regular home delivery to obtaining fresh milk from these other sources.

Brush Traction was a manufacturer and maintainer of railway locomotives in Loughborough, England whose operations have now been merged into the Wabtec company's Doncaster UK operations.

<span class="mw-page-title-main">Ransomes, Sims & Jefferies</span>

Ransomes, Sims and Jefferies Limited was a major British agricultural machinery maker also producing a wide range of general engineering products in Ipswich, Suffolk including traction engines, trolleybuses, ploughs, lawn mowers, combine harvesters and other tilling equipment. Ransomes also manufactured Direct Current electric motors in a wide range of sizes, and electric forklift trucks and tractors. They manufactured aeroplanes during the First World War. Their base, specially set up in 1845, was named Orwell Works.

<span class="mw-page-title-main">Guy Motors</span>

Guy Motors was a Wolverhampton-based vehicle manufacturer that produced cars, lorries, buses and trolleybuses. The company was founded by Sydney S. Guy (1885–1971) who was born in Kings Heath, Birmingham. Guy Motors operated out of its Fallings Park factory from 1914 to 1982, playing an important role in the development of the British motor industry.

<span class="mw-page-title-main">Karrier</span> British commercial vehicle manufacturer

Karrier was a British marque of motorised municipal appliances and light commercial vehicles and trolley buses manufactured at Karrier Works, Huddersfield, West Yorkshire, by Clayton and Co., Huddersfield, Limited. They began making Karrier motor vehicles in 1908 in Queen Street South, Huddersfield. In 1920, H.F. Clayton sold Clayton and Co's Huddersfield business into public listed company Karrier Motors while keeping their Penistone operation separate. Mechanical and electrical engineers Clayton & Co Penistone, remain active in 2020 as Clayton Penistone Group.

<span class="mw-page-title-main">Wales & Edwards</span>

Wales & Edwards was a British manufacturer of milk floats based in Harlescott, Shrewsbury. They were particularly well known for their three wheelers. It was one of the oldest milk float manufacturers lasting from the early 1940s to the early 1990s. In 1989, the company was acquired by Smith Electric Vehicles. Major customers included United Dairies and in the early years, Express Dairies. The basic design evolved throughout W&E's existence before finally ending its days as the Rangemaster.

<span class="mw-page-title-main">AJS Model D</span> Type of motorcycle

The AJS Model D is a British motorcycle made by A. J. Stevens & Co. Ltd in Wolverhampton between 1912 and 1925. With production halted by the First World War AJS managed to develop the Model D into a popular sidecar machine and it was eventually replaced by the larger capacity AJS Model E.

<span class="mw-page-title-main">Motorized tricycle</span> Resembling a bicycle with two rear wheels and an engine

A motorized tricycle, motor trike, or motortrycle is a three-wheeled vehicle based on the same technology as a bicycle or motorcycle, and powered by an electric motor, motorcycle, scooter or car engine.

<span class="mw-page-title-main">Morrison-Electricar</span> Former British electric vehicle manufacturer

Morrison-Electricar was a British manufacturer of milk floats and other battery electric road vehicles (BERV). Their first vehicle was built for a bakery in 1933, and the company ceased to exist when it was finally sold to M & M Electric Vehicles in 1983.

<span class="mw-page-title-main">Victor Electrics</span>

Victor Electrics Ltd was a British manufacturer of milk floats and other battery electric road vehicles. The company was formed in 1923 by Outram's Bakery in Southport, Merseyside, to make bread vans for their own use, but they soon diversified into other markets, including the Dairy industry. Their first vehicles had bonnets, like conventional vans, which stored the batteries, but by 1935 all of their vehicles were forward control models, with the cab at the front. They were acquired by Brook Motors in 1967, and became part of the Hawker Siddeley group in 1970. They made a small number of railway locomotives during this latter period.

<span class="mw-page-title-main">Harbilt Electric Trucks</span>

Harbilt Electrics Trucks was a British manufacturer of milk floats, other battery electric road vehicles and a variety of battery electric vehicles designed for industrial use rather than on the public roads. The company was formed in 1935 in Market Harborough, Leicestershire, and diversified into electric vehicles after the end of the Second World War. They had a good record at exporting their products, with notable successes in Switzerland and California. There were several changes of ownership during the 1970s and 1980s, and the company ceased to exist in 1989.

<span class="mw-page-title-main">Manulectric</span> British marque of milk floats and other battery electric road vehicles

Manulectric was a British marque of milk floats and other battery electric road vehicles. The vehicles were made by Sidney Holes Electric Vehicles, of Brighton, Sussex. They were designed out of Holes' experience of doorstep milk delivery, through Holes and Davigdor Dairies. Both pedestrian controlled vehicles (PCVs) and ride-on models were produced, and entered the market around 1947. The company was bought by Stanley Engineering in the 1960s, and sold to Crompton Electricars in 1972. Some Manulectric models were subsequently manufactured by Harbilt Electric Trucks. At least four Manulectric vehicles have survived, and are privately preserved.

<span class="mw-page-title-main">Lewis Electruk</span>

Lewis Electruk was a British marque of milk floats, produced by T H Lewis Ltd, a company which had close ties with Express Dairies, the London-based retail milk company. They made pedestrian controlled vehicles (PCVs) and ride-on vehicles between 1934 and 1961. The manufacturing of battery electric road vehicles was then sold on to Morrison-Electricar who continued to build two Electruk models for the dairy industry. Major purchasers of their products included Express Dairies and the London Co-operative Society.

<span class="mw-page-title-main">Sunbeam Commercial Vehicles</span>

Sunbeam Commercial Vehicles was a commercial vehicle manufacturing offshoot of the Wolverhampton based Sunbeam Motor Car Company when it was a subsidiary of S T D Motors Limited. Sunbeam had always made ambulances on modified Sunbeam car chassis. S T D Motors chose to enter the large commercial vehicle market in the late 1920s, and once established they made petrol and diesel buses and electrically powered trolleybuses and milk floats. Commercial Vehicles became a separate department of Sunbeam in 1931.

<span class="mw-page-title-main">Midland Electric Vehicles</span>

Midland Electric Vehicles was a British manufacturer of milk floats and other battery electric road vehicles between 1936 and 1958. They were based in Leamington Spa, and one of their major customers was Midland Counties Dairies, to whom they supplied just the chassis, with bodywork being built by the customer. At least two of their vehicles survive in museums.

<span class="mw-page-title-main">Helecs Vehicles</span>

Helecs was a marque of British battery-electric road vehicles, produced initially by the electrical engineers Hindle Smart Co Ltd of Ardwick, Manchester from 1948 onwards. One of their first vehicles was a collaboration with Jensen Motors for a tractor unit, used primarily for railway deliveries, and they then produced a number of vehicles which were aimed at the dairy industry and bodied as milk floats for retail milk delivery. They had some success with exports to Canada, and two independent companies bearing the Helecs Vehicles name were set up, in 1952 and 1955. All of the companies became insolvent in 1956. One of the vehicles for which they built the chassis is on public display at The Transport Museum, Wythall.

<span class="mw-page-title-main">Partridge Wilson Engineering</span>

Partridge Wilson Engineering was a company established in Leicester, England in 1926. It initially made radios, and then battery chargers. In 1934 it began to build battery electric road vehicles, producing both cars and milk floats, which were marketed under the Wilson Electric marque. Vehicle production ceased in 1954, but it continued to make chargers and rectifiers. In 1974, it became part of Westinghouse Davenset Rectifiers Ltd, owned by Westinghouse Brake & Signal Company and in 1986 the Leicester site was closed, with manufacturing transferring to Chippenham. At least two of the commercial vehicles and three of the cars have been preserved.

Tomlinson Electric Vehicles was a British manufacturer of milk floats and other battery electric road vehicles, which also supplied vehicles to the Benelux countries. The company was formed in the mid-1930s. In 1949 they were taken over by King's Motors of Oxford, but the Tomlinson name was retained. They made a battery-electric railway locomotive in 1958, and hoped to diversify into this market, but were the subject of a hostile takeover by an asset stripping company in 1961, after which vehicle production ceased.

<span class="mw-page-title-main">Ross Auto Engineering</span>

Ross Auto Engineering was a British manufacturer of milk floats and other battery electric road vehicles. The company was formed in 1949 by Victor Electrics, another manufacturer of milk floats. In 1955 they took over the production of Helecs battery electric road vehicles, and also introduced their own models. With the rapid demise of home milk deliveries, production of vehicles ceased in the 1980s, by which time the company had diversified into mobility services, and began trading as Ross Care.

<span class="mw-page-title-main">Metrovick electric vehicles</span>

MetroVick electric vehicles were a range of battery electric road vehicles produced by the heavy engineering company Metropolitan-Vickers between 1934 and 1944. The company was renamed Metropolitan-Vickers in 1919, and entered the electric vehicle market in 1934, when they bought up the General Vehicle Company of Birmingham. They inherited the designs for the Gordon range of models, and continued to service and supply parts for the G.V. Electric vehicles. Their main sales seem to have been of light vans and dairy vehicles, in three sizes, which they promoted through a series of exhibitions. During the Second World War, they experienced difficulties in obtaining raw materials, and the number of vehicles that could be built was severely restricted by quotas. Production of the range ceased entirely in 1944, and when hostilities ceased, they sold the electric vehicle business to Brush in 1945.

References

  1. 1 2 3 "The Graiseley Electric". Wolverhampton History & Heritage. Archived from the original on 2 February 2017. Retrieved 31 July 2016.
  2. "A new battery-electric vehicle". Commercial Motor. 8 January 1937. p. 30.
  3. 1 2 "For house-to-house and internal transport". Commercial Motor. 1 June 1940. p. 36.
  4. Hills 1943, p. 41.
  5. 1 2 3 Signage on XMP 457. Transport Museum, Wythall.
  6. "Cooked meals by pedestrian controlled electric". Commercial Motor. 9 February 1945. p. 31.
  7. "New appliances at factory show". Commercial Motor. 27 March 1953. p. 31.
  8. "Show of electric vehicles at Dorking". Commercial Motor. 10 April 1953. p. 35.
  9. "More uses for handling appliances". Commercial Motor. 4 June 1954. p. 51.
  10. "Mechanical aid for every trade". Commercial Motor. 11 May 1956. p. 62.
  11. "Directory of Vehicle Makers". Commercial Motor. 6 May 1960. p. 135.
  12. "Materials Handling Exhibition". Commercial Motor. 23 May 1969. p. 54.
  13. "British electric vehicles model by model". Commercial Motor. 9 July 1971. p. 58.
  14. "Diamond Motorcycles". historywebsite.co.uk. Archived from the original on 2 June 2018. Retrieved 14 January 2020.
  15. "PP registrations - Buckinghamshire". Old Classic Car. Archived from the original on 7 July 2017. Retrieved 14 January 2020.