The Gravis UltraSound was notable at the time of its 1992 launch for providing the IBM PC platform with sample-based music synthesis technology (marketed as "wavetable"), that is the ability to use real-world sound recordings rather than artificial computer-generated waveforms as the basis of a musical instrument. Samples of pianos or trumpets, for example, sound more like their real respective instruments.[citation needed] With up to 32 hardware audio channels, the GUS was notable[citation needed] for MIDI playback quality with a large set of instrument patches that could be stored in its own RAM.
The cards were all manufactured on red PCBs, similar to fellow Canadian company ATI. They were only a little more expensive than Creative cards, undercutting many equivalent professional cards aimed at musicians by a huge margin.
The first UltraSound was released in early October 1992, along with the Gravis PC GamePad. The Ultrasound was one of the first PC soundcards to feature 16-bit, 44.1 kHz stereo. The final revision (v3.74) of the GUS Classic features 256 kB of onboard RAM (upgradeable to 1024 kB through DIP sockets), hardware analog mixer, and support for 16-bit recording through a separate daughterboard based on the Crystal Semiconductor CS4231 audio codec.
Reception
Computer Gaming World in 1993 criticized the UltraSound's Sound Blaster emulation and lack of native support in games, stating that "it is hard to recommend this card to anyone other than a Windows MIDI musician".[1]
UltraSound MAX
Gravis UltraSound MAX
Released in 1994, UltraSound Max is a version of the GUS with a CS4231 codec on board, 512 kB of onboard RAM (upgradeable to 1024 kB with a single SOJ chip), and Panasonic/Sony/MitsumiCD-ROM interface slots. CS4231 provides support for Windows Sound System specs, although the IO port range doesn't match the WSS hardware, and can be used for SoundBlaster emulation. The software CD includes a demo that featured "3D holographic sound" through the use of software HRTF filters.
Gravis UltraSound PnP Pro
UltraSound Plug & Play (PnP)
Released in 1995, the Ultrasound Plug & Play was a new card based on AMD InterWave technology with a completely different sound set. Supposedly Synergy acted as the ODM-producer for it (as evidenced by their logo on the rear side of the card, although early and now very rare GUS PnP cards did not have the Synergy logo). The card features 1 MB of sound ROM, no onboard RAM (although it can be expanded to 8 MB with two 30-pin SIMMs), and an ATAPI CD-ROM interface. A 'Pro' version adds 512 kB of on-board RAM required for compatibility with the GUS Classic. In 2014, a RAM adapter for the 72-pin SIMM was produced by retro-computer enthusiasts that made it possible to install 16 MB of RAM on the 'Pro' version without any modifications to the card.
UltraSound ACE (Audio Card Enhancer)
Released in 1995, this budget version of UltraSound Classic has 512 kB of RAM (upgradable to 1024 kB, just as is the MAX), and has no game port or recording ability. Marketed as a competitor to Wave Blaster-compatible cards, it is supposed to be installed alongside a SoundBlaster Pro/16 card as a sample-based synthesis (marketed as 'wavetable synthesis') upgrade. A prototype of this card was named "Sound Buddy".
Gravis UltraSound ACE
UltraSound CD3
An OEM version of UltraSound Classic produced by Synergy, with 512 – 1024 kB of RAM. It features AT-BUS CD-ROM interfaces following Sony, Mitsumi and MKE/Panasonic standards. This is the only Gravis sound card with a green circuit board. It is similar to a few card clones, including the Primax SoundStorm Wave (model Sound M-16B) and the AltraSound.
UltraSound Extreme
Released in 1996, the UltraSound Extreme is a 3rd party OEM system combining the UltraSound Classic with an ESS AudioDrive ES1688 sound chip for Sound Blaster Pro and AdLib emulation. It was produced by Synergy as was the ViperMAX. It has 1MB RAM by default, but cannot be upgraded any further.
Gravis UltraSound Extreme
UltraSound Clones and OEM cards
All clones use the original Gravis GF1 or the AMD InterWave soundchip.
Primax SoundStorm Wave (GF1) - there are two variants of cards from the well known scanner and mouse producer. Re-labeled Altrasound as Sound M-16B and different Sound M-16C with 4x CD-ROM Interfaces.
D&B UltraWave (GF1) - this card has 512 kB onboard RAM by default, upgradeable to 1024 kB RAM using a 512 kB SOJ-40 DRAM chip. Has a DIP socket for a 16 kB boot ROM (optional) and an IDE interface (secondary).
Synergy ViperMAX (GF1) - same card later repacked as UltraSound Extreme, but with only 512 kB RAM on board.
Expertcolor MED3201 (InterWave LC) - probably the only card with cut-down variant of GFA1 chip - AM78C200 InterWave LC. First series was with standard Am78C201KC.
Compaq Ultra-Sound 32 (InterWave) - one of the last InterWave cards was designed for Compaq Presario desktops. Newer "C" revision of InterWave - AM78C201AKC and TEA6330T fader. Produced by STB Systems.
STB Systems Soundrage 32 (InterWave) - standard InterWave card missing SIMM slots and IDE interface. There was "Pro" variant with 512 kB RAM. AM78C201KC chip.
Core Dynamics DYNASonix 3D/PRO (InterWave) - features additional DSP chip that offered a graphic equalizer and additional sound FX presets.
Philips PCA761AW (InterWave) - card design closely resembles the "AMD InterWave OEM Design" prototype. Has a footprint for 512kb RAM, often left unpopulated. AM78C201KC chip.
Reveal WAVExtreme 32 (InterWave) - AM78C201KC based design. Comes without RAM and has no sockets/footprints to add any.
PicoGUS (OpenSource) - Pico Pi based design started in 2022 by Ian Scott. Community support built up over the subsequent years. As of 2024 its emulation has similar compatibility to an original GUS. The PicoGUS also includes support for Tandy 3 Voice like the Tandy 1000, Game Blaster / Sound Blaster 2.0 (Sound Blaster), and intelligent mode MPU-401 support. [2][3]
GF1
The GF1 was co-developed by Advanced Gravis and Forte Technologies (creator of the VFX1 Headgearvirtual reality helmet) and produced by Integrated Circuit Systems under the ICS11614 moniker. The chip was actually derived from the EnsoniqOTTO (ES5506) chip, a next-generation version of the music-synthesizer chip found in the Ensoniq VFX and its successors.
The GF1 is purely a sample-based synthesis chip with the polyphony of 32 oscillators, so it can mix up to 32 mono PCM samples or 16 stereo samples entirely in hardware. The chip has no built-in codec, so the sounds must be downloaded to onboard RAM prior to playback. Sound compressionalgorithms such as IMAADPCM are not supported, so compressed samples must be decompressed prior to loading.
The sound quality of the GF1 is not constant and depends on the selected level of polyphony. A CD-quality 44.1kHz sample rate is maintainable with up to 14-voice polyphony; the sample rate progressively deteriorates until 19.2kHz at the maximum of 32-voice polyphony. The polyphony level is software-programmable, so the programmer can choose the appropriate value to best match the application. Advanced sound effects such as reverberation and chorus are not supported in hardware. However, software simulation is possible; a basic "echo" effect can be simulated with additional tracks, and some trackers can program effects using additional hardware voices as accumulators.
Sample RAM
The UltraSound offers MIDI playback by loading instrument patches into adapter RAM located on the card, not unlike how instruments are stored in ROM on other sample-based cards (marketed as "wavetable" cards). The card comes with a 5.6 MB set of instrument patch (*.PAT) files; most patches are sampled at 16-bit resolution and looped to save space. The patch files can be continuously tweaked and updated in each software release.
The card's various support programs use .INI files to describe what patches should be loaded for each program change event. This architecture allowed Gravis to incorporate a General MIDI-compatible mapping scheme. Windows 95 and 98 drivers use UltraSound.INI to load the patch files on demand. In DOS, the loading of the patches can be handled by UltraMID, a middlewareTSR system provided by Gravis that removes the need to handle the hardware directly. Programmers are free to include the static version of the UltraMID library in their applications, eliminating the need for the TSR. The application programmer can choose to preload all patches from disk, resizing as necessary to fit into the UltraSound's on-board RAM, or have the middleware track the patch change events and dynamically load them on demand. This latter strategy, while providing better sound quality, introduces a noticeable delay when loading patches, so most applications just preload a predefined set.
Each application can have its own UltraMID.INI containing a set of patch substitutions for every possible amount of sample RAM (256/512/768/1024 kB), so that similar instruments are used when there is not enough RAM to hold all of the patches needed (even after resampling to smaller sizes). Unused instruments are never loaded. This concept is similar to the handling of sample banks in digital samplers. Some games — including Doom, Doom II and Duke Nukem 3D — come with their own optimized UltraMID.INI.
The UltraSound cards gained great popularity in the PC tracker music community. The tracker format was originally developed on the CommodoreAmiga personal computer in 1987, but due to the PC becoming more capable of producing high-quality graphics and sound, the demoscene spilled out onto the platform in droves and took the tracker format with it. Typical tracker formats of the era included MOD, S3M, and later XM. The format stores the notes and instruments digitally in the file instead of relying on a sound card to reproduce the instruments. A tracker module, when saved to disk, typically incorporates all the sequencing data and samples, and typically the composer would incorporate their assumed name into the list of samples. This primitive precursor to the modern sampler opened the way for Gravis to enter the market, because the requirements matched the capabilities of the GF1 chip ideally. The problem with other sound cards playing these formats was that they had to downmix voices into one or both of its output channels in software, further deteriorating the quality of 8-bit samples in the process. An UltraSound card was able to download the samples to its RAM and mix them using fast and high-quality hardware implementation, offloading the CPU from the task. Gravis realized early on that the demo scene support could be a sales booster, and they gave away 6000 cards for free[citation needed] to the most famous scene groups and people in the scene.
As the GF1 chip does not contain AdLib-compatible OPL2 circuitry or a codec chip, Sound Blaster compatibility was difficult to achieve at best. Consumers were expected to use the included emulation software to emulate other standards, an activity not necessary with many other cards that emulated the Sound Blaster through their sound hardware. The emulation software ran as a huge TSR that was difficult to manage in the pre-Windows days of complicated DOS extenders.
Although there was native support for many popular games that used middleware sound libraries like HMI (Human Machine Interfaces) Sound Operating System, the Miles Audio Interface Libraries (AIL), the Miles Sound System or others, the user had to patch the games by replacing the existing sound drivers with the UltraSound versions provided on the installation CD. Also, the UltraSound required two DMA channels for full-duplex operation, and 16-bit channels were generally faster, so many users chose to use them, but this led to errors for games that used the DOS/4GW DOS extender, which was common in the UltraSound's era.
The two principal software sound emulators included with software package were:
SBOS, Sound Board OS — Sound Blaster Pro 8-bit stereo emulation and AdLib FM synthesis. It was a real-mode software emulator that recreated the AdLib's OPL2 FM synth chip and required that the user have a 286 processor or better. There were special versions for the UltraSound MAX (MAXSBOS) and AMD InterWave-based cards (IWSBOS), which made use of the CS4231 codec chip instead.
Mega-Em — advanced emulation software that required at least a 386 processor and EMM manager with DPMI/VCPI support. Mega-Em emulated the 8-bit Sound Blaster circuitry for sound effects and the Roland MT-32/LAPC-I or Roland Sound Canvas/MPU-401 for music. It supported UltraMID TSR functionality.
AMD InterWave
AMD InterWave AM78C201KC
The great potential of the original UltraSound enabled Advanced Gravis to license the new GFA1 chip and software to AMD, who were trying to enter the sound chip market at the time. The chip, released in 1995, was named AMaDeus, with the AMD part number of Am78C201 and was marketed as InterWave. It was enhanced to handle up to 16 MB of onboard memory, IMA ADPCM-compressed samples, have no sample rate drop at full 32 voices, and featured additional logic to support hardware emulation of FM synthesis and simple delay-based digital sound effects such as reverb and chorus. It was compatible with CS4231 codec installed in the UltraSound MAX or 16-bit recording daughterboard for the UltraSound Classic.
The sound "patch set" was reworked from a collection of individual instrument .PAT files to a unified .FFF/.DAT sound bank format, resembling SoundFont, which could be either ROM or RAM based. There were 4 versions of the sound bank: a full 16-bit 4 MB with 8-bit downsampled 2 MB version, and 16-bit 2 MB (different sample looping) with 8-bit downsampled 1 MB version. A converter utility, GIPC, was provided for making .FFF/.DAT banks out of .PAT/.INI collections.
The reference card contained a 1 MB μ-law ADPCM compressed sound ROM, which contained basic General MIDI voices and sound samples to help FM emulation, and 2 slots for RAM expansion through 30-pin SIMMs. The IWSBOS emulator was reworked to include Mega-Em features such as General MIDI emulation, and the SBOS kernel was included in Windows 95 drivers to provide emulation in a DOS Box window.
The process of patching middleware sound 'drivers' was greatly simplified with PREPGAME utility, which could fix most known DOS games automatically either by correctly installing and configuring native InterWave drivers or replacing the binaries for some rare devices like Covox. It could also update DOS/4GW extender to work around its 16-bit DMA bug.
The GFA1 featured a GUS/MAX compatibility mode, but the base card was not compatible with the UltraSound Classic unless some memory was installed.
The InterWave technology was used in the Gravis UltraSound PnP line of cards. It was also licensed to various OEMs such as STB Systems, Reveal, Compaq, Core Dynamics, Philips and ExpertColor. Some high-end OEM variants contained a full-blown 4 MB patch set in ROM[citation needed] and proprietary hardware DSPs to enable features like additional sound effect algorithms and graphic equalizer.
Software drivers for the InterWave were written by eTek Labs, containing the same development team as the earlier Forte Technologies effort. eTek Labs was split off from Forte Technologies just prior to this effort. In August 1999, eTek Labs was acquired by Belkin and is currently their research and development team.
Some game developers of the time noted problems with the software development kit and the product's hardware design. On the user-side, the Sound Blaster emulation was especially hard to get right out of the box, and this resulted in a substantially high number of product returns at the store level and thus soured the retail channel on the product. Bundled software was refined over time, but Gravis could not distribute updates effectively.
The company itself also created its own trouble. When Gravis's list of promised supporting game titles failed to materialize, the company lost credibility with consumers and commercial developers. Several publishers and developers threatened to sue the company over misrepresentation of their products — pointing to outright fabrication of Gravis's list.
The shareware games industry embraced the Gravis more than the retail games industry.[citation needed] Companies which did this in an early stage were publisher Apogee and developers id software and Epic MegaGames. Gravis can also claim victory in the demoscene, which had taken the GUS to its heart, ensuring a dedicated cult following for a number of years. But without the marketing and developer presence of Creative Labs, Gravis could not generate either the sales or support required for the Gravis soundcard to compete in the mainstream market against the de facto standard Soundblaster.
Although the InterWave chip was a substantially improved version of the GF1 chip, this new design was not able to hold up with the Sound Blaster AWE32. More than that, AMD was facing financial troubles at the time so it was forced to close many projects, including the InterWave.
Due to declining sales, Gravis was eventually forced out of the soundcard business, and the UltraSound's failure nearly took the entire company down with it. Advanced Gravis, once one of the dominant players in the PC peripherals marketplace, had bet much of the future of the company on the UltraSound and paid the price for its demise. Shareholders sued the company charging gross incompetence by its management, in regards to the entire UltraSound effort. After significant restructuring, including acquisition by competitor Kensington Technology Group (via its parent, ACCO World Corp), the company retreated to its core market, the one which had made it a success — joysticks and gamepads.
A sound card is an internal expansion card that provides input and output of audio signals to and from a computer under the control of computer programs. The term sound card is also applied to external audio interfaces used for professional audio applications.
A music tracker is a type of music sequencer software for creating music. The music is represented as discrete musical notes positioned in several channels at chronological positions on a vertical timeline. A music tracker's user interface is traditionally number based. Notes, parameter changes, effects and other commands are entered with the keyboard into a grid of fixed time slots as codes consisting of letters, numbers and hexadecimal digits. Separate patterns have independent timelines; a complete song consists of a master list of repeated patterns.
Sound Blaster is a family of sound cards and audio peripherals designed by Singaporean technology company Creative Technology. The first Sound Blaster card was introduced in 1989.
Digital waveguide synthesis is the synthesis of audio using a digital waveguide. Digital waveguides are efficient computational models for physical media through which acoustic waves propagate. For this reason, digital waveguides constitute a major part of most modern physical modeling synthesizers.
The Environmental Audio Extensions are a number of digital signal processing presets for audio, present in Creative Technology Sound Blaster sound cards starting with the Sound Blaster Live and the Creative NOMAD/Creative ZEN product lines. Due to the release of Windows Vista in 2007, which deprecated the DirectSound3D API that EAX was based on, Creative discouraged EAX implementation in favour of its OpenAL-based EFX equivalent – though at that point relatively few games used the API.
The X68000 is a home computer created by Sharp Corporation. It was first released in 1987 and sold only in Japan.
Ensoniq Corp. was an American electronics manufacturer, best known throughout the mid-1980s and 1990s for its musical instruments, principally samplers and synthesizers.
There have been various families of Yamaha audio controllers labelled as YMF7xx.
Soundscape S-2000 was Ensoniq's first direct foray into the PC sound card market. The card arrived on the market in 1994. It is a full-length ISA digital audio and sample-based synthesis device, equipped with a 2 MiB Ensoniq-built ROM-based patch set. Some OEM versions of the card feature a smaller 1 MiB patch set. It was praised for its then-high quality music synthesis and sound output, high compatibility and good software support.
The Soundscape Elite was Ensoniq's high-end ISA PC sound card offering. It offers the highest MIDI quality of any PC sound card Ensoniq produced. The board is an evolution of the company's previous Soundscape S-2000. The Soundscape ELITE was launched in March 1995.
The Ensoniq AudioPCI is a Peripheral Component Interconnect (PCI)-based sound card released in 1997. It was Ensoniq's last sound card product before they were acquired by Creative Technology. The card represented a shift in Ensoniq's market positioning. Whereas the Soundscape line had been made up primarily of low-volume high-end products full of features, the AudioPCI was designed to be a very simple, low-cost product to appeal to system OEMs and thus hopefully sell in mass quantities.
Sound Blaster Live! is a PCI add-on sound card from Creative Technology Limited for PCs. Moving from ISA to PCI allowed the card to dispense with onboard memory, storing digital samples in the computer's main memory and then accessing them in real time over the bus. This allowed for a much wider selection of, and longer playing, samples. It also included higher quality sound output at all levels, quadrophonic output, and a new MIDI synthesizer with 64 sampled voices. The Live! was introduced on August 11, 1998 and variations on the design remained Creative's primary sound card line into the early 2000's.
The Sound Blaster 16 is a series of sound cards by Creative Technology, first released in June 1992 for PCs with an ISA or PCI slot. It was the successor to the Sound Blaster Pro series of sound cards and introduced CD-quality digital audio to the Sound Blaster line. For optional wavetable synthesis, the Sound Blaster 16 also added an expansion-header for add-on MIDI-daughterboards, called a Wave Blaster connector, and a game port for optional connection with external MIDI sound modules.
Sound Blaster Advanced Wave Effects 64 is an ISA sound card from Creative Technology. It is an add-on board for PCs. The card was launched in November 1996.
The Sound Blaster AWE32 is an ISA sound card from Creative Technology. It is an expansion board for PCs and is part of the Sound Blaster family of products. The Sound Blaster AWE32, introduced in March 1994, was a near full-length ISA sound card, measuring 14 inches (356 mm) in length, due to the number of features included.
Windows Sound System (WSS) is a sound card specification developed by Microsoft, released at the end of 1992 for Windows 3.1. It was sold as a bundle which included an ISA sound card, a microphone, a pair of headphones and a software package.
LMMS is a digital audio workstation application program. It allows music to be produced by arranging samples, synthesizing sounds, entering notes via computer keyboard or mouse or by playing on a MIDI keyboard, and combining the features of trackers and sequencers. It is free and open source software, written in Qt and released under GPL-2.0-or-later.
Moonsound is the name of a sound card released for the MSX home-computer system at the Tilburg Computer Fair in 1995. It was designed by electronic engineer Henrik Gilvad and produced by Sunrise Swiss on a semi-hobby basis.
The HP 64000 Logic Development System, introduced 17 September 1979, is a tool for developing hardware and software for products based on commercial microprocessors from a variety of manufacturers. The systems assisted software development with assemblers and compilers for Pascal and C, provided hardware for in-circuit emulation of processors and memory, had debugging tools including logic analysis hardware, and a programmable read-only memory (PROM) chip programmer. A wide variety of optional cards and software were available tailored to particular microprocessors. When introduced the HP 64000 had two distinguishing characteristics. First, unlike most microprocessor development systems of the day, such as the Intel Intellec and Motorola EXORciser, it was not dedicated to a particular manufacturer's microprocessors, and second, it was designed such that up to six workstations could be connected via the HP-IB (IEEE-488) instrumentation bus to a common hard drive and printer to form a tightly integrated network.
References
↑ Weksler, Mike; McGee, Joe (October 1993). "CGW Sound Card Survey". Computer Gaming World. pp.76–83. Retrieved 26 March 2016.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
