Green Star (Australia)

Last updated

Green Star is a voluntary sustainability rating system for buildings in Australia. It was launched in 2003 by the Green Building Council of Australia (GBCA).

Contents

The Green Star rating system assesses the sustainability of projects at all stages of the built environment life cycle. Ratings can be achieved at the planning phase for communities, during the design, construction or fit out phase of buildings, or during the ongoing operational phase.

The system considers assesses and rates buildings, fitouts and communities against a range of environmental impact categories, and aims to encourage leadership in environmentally sustainable design and construction, showcase innovation in sustainable building practices, and consider occupant health, productivity and operational cost savings.

In 2013, the GBCA released The Value of Green Star, a report that analysed data from 428 Green Star-certified projects occupying 5,746,000 million square metres across Australia and compared it to the ‘average’ Australian building and minimum practice benchmarks. The research found that, on average, Green Star-certified buildings produce 62% fewer greenhouse gas emissions and use 66% less electricity than average Australian buildings. Green Star buildings use 51% less potable water than average buildings. Green Star-certified buildings also have been found to recycle 96 per cent of their construction and demolition waste, compared to the average 58% for new construction projects. [1]

Rating system

Green Star benchmarks projects against the nine Green Star categories of: Management; Indoor Environment Quality; Energy; Transport; Water; Materials; Land Use & Ecology; Emissions and Innovation. [2]

Within each category are credits which address specific aspects of sustainable building design, construction or performance. Ratings for buildings are available at the design stage ('Design' ratings), at the post-construction phase (known as 'As Built' ratings) or for interior fitouts (‘Interiors’ ratings).

Green Star - Communities rates projects at the community or precinct scale against the categories of: Liveability; Economic Prosperity; Environment; Design; Governance and Innovation.

Green Star certification is a formal process in which an independent assessment panel reviews documentary evidence that a project meets Green Star benchmarks within each credit. The assessment panel awards points, with a Green Star rating determined by comparing the overall score with the rating scale:

ScoreRatingCategory
10-19One StarMinimum Practice
20-29Two StarAverage Practice
30-44Three StarGood Practice
45-59Four StarBest Practice
60-74Five StarAustralian Excellence
75+Six StarWorld Leadership

Green Star rating tools for building, fitout and community design and construction reward projects that achieve best practice or above, which means ratings of 1, 2 or 3 are not awarded. Ongoing performance of a building can be rated at any of the 6 star ratings.

Buildings assessed using the Green Star – Performance rating tool will be able to achieve a Green Star rating from 1 – 6 Star Green Star. [3] [4]

Projects

More than 1900 projects around Australia have achieved Green Star ratings. The first building to achieve a Green Star rating was 8 Brindabella Circuit at Canberra Airport, which achieved a 5 Star Green Star – Office Design v1 rating in 2004. In 2005, Council House 2 in Melbourne became the first building to achieve a 6 Star Green Star – Office Design v1 rating. Flinders Medical Centre – New South Wing was the first healthcare facility in Australia to achieve a Green Star rating. Scarborough Beach Pool was the first aquatic facility to achieve a 6 star green rating. [5] Bond University Mirvac School for Sustainability achieved the first Green Star rating for an educational facility. Other well-known Green Star projects include 1 Bligh Street in Sydney and the Melbourne Convention and Exhibition Centre.

Controversy

The launch of the Green Star rating system was met with some scepticism by green groups, which argued that the rating system was funded by mostly development industry companies. [6] There was controversy over a proposal to expand the forest certification of timber and composite timber products, but this issue was resolved with the release of the revised ‘Timber’ credit in 2010. [7] There has also been concern over various aspects of the timeframe for awarding of the certification, transfer of properties once awarded, and termination rights. [8]

See also

Related Research Articles

<span class="mw-page-title-main">Energy Star</span> US energy efficiency program

Energy Star is a program run by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy (DOE) that promotes energy efficiency. The program provides information on the energy consumption of products and devices using different standardized methods. The Energy Star label is found on more than 75 different certified product categories, homes, commercial buildings, and industrial plants. In the United States, the Energy Star label is also shown on the Energy Guide appliance label of qualifying products.

<span class="mw-page-title-main">Green building</span> Structures and processes of building structures that are more environmentally responsible

Green building refers to both a structure and the application of processes that are environmentally responsible and resource-efficient throughout a building's life-cycle: from planning to design, construction, operation, maintenance, renovation, and demolition. This requires close cooperation of the contractor, the architects, the engineers, and the client at all project stages. The Green Building practice expands and complements the classical building design concerns of economy, utility, durability, and comfort. Green building also refers to saving resources to the maximum extent, including energy saving, land saving, water saving, material saving, etc., during the whole life cycle of the building, protecting the environment and reducing pollution, providing people with healthy, comfortable and efficient use of space, and being in harmony with nature. Buildings that live in harmony; green building technology focuses on low consumption, high efficiency, economy, environmental protection, integration and optimization.’

<span class="mw-page-title-main">LEED</span> Standard for green building design

Leadership in Energy and Environmental Design (LEED) is a green building certification program used worldwide. Developed by the non-profit U.S. Green Building Council (USGBC), it includes a set of rating systems for the design, construction, operation, and maintenance of green buildings, homes, and neighborhoods, which aims to help building owners and operators be environmentally responsible and use resources efficiently.

<span class="mw-page-title-main">U.S. Green Building Council</span> Non-profit organization that promotes sustainability in building design

The U.S. Green Building Council (USGBC), founded in 1993, is a private 501(c)3, membership-based non-profit organization that promotes sustainability in building design, construction, and operation. USGBC is best known for its development of the Leadership in Energy and Environmental Design (LEED) green building rating systems and its annual Greenbuild International Conference and Expo, the world's largest conference and expo dedicated to green building. USGBC was one of eight national councils that helped found the World Green Building Council (WorldGBC).

<span class="mw-page-title-main">Council House 2</span> Office in Melbourne, Australia

Council House 2 (also known as CH2), is an office building located at 240 Little Collins Street in the Melbourne central business district, Australia. It is used by the City of Melbourne council, and in April 2005, became the first purpose-built office building in Australia to achieve a maximum Six Green Star rating, certified by the Green Building Council of Australia. CH2 officially opened in August 2006.

BREEAM, first published by the Building Research Establishment (BRE) in 1990, is the world's longest established method of assessing, rating, and certifying the sustainability of buildings. More than 550,000 buildings have been 'BREEAM-certified' and over two million are registered for certification in more than 50 countries worldwide. BREEAM also has a tool which focuses on neighbourhood development.

<span class="mw-page-title-main">Bowden development</span> South Australian urban development

The Bowden development is an urban development in the Australian state of South Australia on a site formerly owned by the Clipsal corporation in the suburb of Bowden, within the City of Charles Sturt, in the Adelaide metropolitan area 2 kilometres from the city centre.

<span class="mw-page-title-main">Green building in Australia</span> Overview of green building in Australia

Green buildings in Australia are assessed and rated by a variety of government and independent ratings systems.

Green building on college campuses is the purposeful construction of buildings on college campuses that decreases resource usage in both the building process and also the future use of the building. The goal is to reduce CO2 emissions, energy use, and water use, while creating an atmosphere where students can be healthy and learn.

<span class="mw-page-title-main">Green home</span>

A green home is a type of house designed to be environmentally sustainable. Green homes focus on the efficient use of "energy, water, and building materials". A green home may use sustainably sourced, environmentally friendly, and/or recycled building materials. This includes materials like reclaimed wood, recycled metal, and low VOC paints. Additionally, green homes often prioritize energy efficiency by incorporating features, such as high-performance insulation, energy efficient appliances, and smart home technologies that monitor and optimize energy usage. Water conservation is another important aspect, with green homes often featuring water-saving fixtures, rainwater harvesting systems, and grey water recycling systems to reduce water waste. It may include sustainable energy sources such as solar or geothermal, and be sited to take maximum advantage of natural features such as sunlight and tree cover to improve energy efficiency.

LEED for Neighborhood Development (LEED-ND), where "LEED" stands for Leadership in Energy and Environmental Design, is a United States-based rating system that integrates the principles of smart growth, urbanism, and green building into a national system for neighborhood design. LEED certification provides independent, third-party verification that a development's location and design meet accepted high levels of environmentally responsible, sustainable development.

Qatar Sustainability Assessment System (QSAS) is a green building certification system developed for the State of Qatar. The primary objective of Qatar Sustainability Assessment System [QSAS] is to create a sustainable built environment that minimizes ecological impact while addressing the specific regional needs and environment of Qatar.

<span class="mw-page-title-main">Coca-Cola Place</span> Commercial office tower in North Sydney, Australia

Coca-Cola Place, originally known as The Ark, is a 21 level commercial office building located at 16-40 Mount St in North Sydney, Australia. It is jointly owned by Investa Property Group and Investa Commercial Property Fund and was designed by Rice Daubney. Major tenants include Coca-Cola Europacific Partners Gartner, McAfee and ARN Media.

NABERS, the National Australian Built Environment Rating System, is an initiative by the government of Australia to measure and compare the environmental performance of Australian buildings and tenancies. There are NABERS rating tools for commercial office buildings to measure greenhouse gas emissions, energy efficiency, water efficiency, waste efficiency and indoor environment quality. There are also energy/greenhouse and water rating tools for hotels, shopping centres and data centres.

The Green Building Initiative (GBI) is a 501(c)(3) nonprofit organization that owns and administers the Green Globes green building assessment and certification in the United States and Canada. It was established in 2004 and is headquartered in Portland, Oregon.

<span class="mw-page-title-main">Resilience (engineering and construction)</span> Infrastructure design able to absorb damage without suffering complete failure

In the fields of engineering and construction, resilience is the ability to absorb or avoid damage without suffering complete failure and is an objective of design, maintenance and restoration for buildings and infrastructure, as well as communities. A more comprehensive definition is that it is the ability to respond, absorb, and adapt to, as well as recover in a disruptive event. A resilient structure/system/community is expected to be able to resist to an extreme event with minimal damages and functionality disruptions during the event; after the event, it should be able to rapidly recovery its functionality similar to or even better than the pre-event level.

The Global Sustainability Assessment System (GSAS) [Originally QSAS] is the first performance-based system in the Middle East and North Africa (MENA) region, developed for assessing and rating buildings and infrastructure for their sustainability impacts. In 2016, FIFA officially endorsed GSAS as the sustainability assessment system for Qatar's eight stadiums set to host the 2022 FIFA World Cup. The primary objective of GSAS is to create a sustainable built environment that minimizes ecological impact and reduces resources consumption while addressing the local needs and environmental conditions specific to the region. GSAS adopts an integrated lifecycle approach for the assessment of the built environment including design, construction and operation phases.

<span class="mw-page-title-main">One Central Park</span> Shopping mall in New South Wales, Australia

One Central Park is a mixed-use dual high-rise building located in the Sydney suburb of Chippendale in New South Wales, Australia. Developed as a joint venture between Frasers Property and Sekisui House, it was constructed by Besix Watpac as the first stage of the Central Park urban renewal project.

The National Green Building Standard (NGBS) is an ANSI-approved green building certification program, specifically focused on single-family and multi-family residential buildings, remodeling projects, and land developments.

<span class="mw-page-title-main">Green building certification systems</span>

Green building certification systems are a set of rating systems and tools that are used to assess a building or a construction project's performance from a sustainability and environmental perspective. Such ratings aim to improve the overall quality of buildings and infrastructures, integrate a life cycle approach in its design and construction, and promote the fulfillment of the United Nations Sustainable Development Goals by the construction industry. Buildings that have been assessed and are deemed to meet a certain level of performance and quality, receive a certificate proving this achievement.

References

  1. Green Building Council of Australia: The Value of Green Star
  2. Green Building Council of Australia: 'Green Star overview'
  3. "The Green Star Rating Scale". Green Building Council Australia. Retrieved 1 July 2016.
  4. "Rating Tool Fact Sheet" (PDF). Green Building Council of Australia. Retrieved 1 July 2016.
  5. "Scarborough Beach Pool | green star". 17 December 2018.
  6. Article summarising the launch of Green Star after Australian Financial Review
  7. Sydney Morning Herald: Green Star rating to focus on legal timber
  8. Article looking at the application process on Mondaq.com