HMCS (later HMAS)[1]Protector was a large flat-iron gunboat commissioned and purchased by the South Australian government in 1884, for the purpose of defending the local coastline against possible attacks in the aftermath of the 'Russian scare', of the 1870s.[2] She arrived in Adelaide in September 1884 and served in the Boxer Rebellion, World War I and World War II.
During July 1943, Protector was requisitioned for war service by the U.S. Army. On the way to New Guinea and off Gladstone, she was damaged in a collision with a tug and abandoned. The hull was taken to Heron Island off the Queensland coast and later sunk for use as a breakwater. Her rusting remains are still visible to this day.
Description and armament
Built by Sir WG Armstrong, Mitchell & Co, Newcastle upon Tyne, England, Protector was built to a standard type F1 flat-iron gunboat design, but was one of the largest of its type, and was classified as a light cruiser, with a displacement of 920tons. Her length was 180feet 6inches (55.02m), with two compound surface-condensing engines that produced 1,500 horsepower (1,100kW). Her top speed was 14 knots (26km/h; 16mph). To conserve fuel (coal) she was originally rigged as a topsail schooner.[3]
Starboard elevation and deck plan, 1888
For her size, Protector was exceptionally heavily armed. Her largest weapon was the 8-inch (203mm)Armstrong-rifled breech-loading gun mounted at the bow. The gun weighed 12tons and could fire a 180-pound (82kg) shell 7,500 yards (6,900m) using a charge of 90lb (41kg) of black powder.[4][5]
Other armaments included five 6-inch (152mm) Woolwich-Armstrong rifled breech-loading guns; four 3-pounder 1.85-calibre Hotchkiss QF guns and five 10-barrel (1.6m3)Gatling machine guns. Her small arms consisted of 200 0.45 Martini-Henry rifles Mk IV, 100 breech-loading revolvers, 100 cutlasses and 30 boarding pikes.
At the outbreak of World War I, her armament was increased to include two 4-inch (100mm) guns, two 12-pounder guns and four 3-pounder guns.
Operational history
In July 1882, motions were brought forward in both houses of the Parliament of South Australia to establish a naval force with the creation of a cruiser-type warship, capable of defending the local coastline and harbours. At the suggestion of Sir William Jervois, Armstrong, Mitchell & Co. of Newcastle upon Tyne were chosen to build the vessel, named Protector, for about 40,000 to 50,000pounds sterling. The builder's estimate was £63,600. The contract authorising construction was signed on 16 November 1882 and the time allotted was fourteen months. The final cost was £65,000.
A number of alterations were incorporated during the vessel's time on the builder's slip, delaying completion until May 1884. On 19 June, the Protector was ready for sea. She was officially commissioned and during the day undertook her initial speed trial run over a four-hour period. Her average speed was 14 knots (26km/h). The guns were then tested in the open sea.[6]
Protector sailed from Newcastle upon Tyne on 27 June 1884, en route to Australia and arrived in Gibraltar on 5 July. Sailing via Malta and Port Said, the Protector anchored at Suez on 25 July. Rigged as a topsail schooner the gunboat sailed on to Colombo (Sri Lanka), leaving there on 25 August. During her voyage to Adelaide Protector flew the Blue Ensign. She left King George's Sound in late September and on 30 September, arrived at Port Adelaide.[6]
Protector's first commanding officer was Commander J.C.P. Walcott RN, who brought her out from England. He served as the commander in charge of the South Australian Naval Forces until August 1893, when he was succeeded by Captain Creswell. Protector remained in South Australian waters for the next fifteen uneventful years. Her only activities comprised regular deployments on station at Largs Bay.
Boxer Rebellion
Protector circa 1901
Around the turn of the 20th century, all Australian colonies were involved in the Boer War in South Africa, when a call from Britain came to help defeat the Chinese secret society known as the Boxers. South Australia responded by offering Protector and her crew, which varied in number between 85 and 96.[7]
Protector's crew in 1900
Protector was to join an international force composed of sailors, marines, and soldiers from Britain, France, Italy, the United States, Japan, Russia, Germany, and Austria-Hungary—the so-called Eight-Nation Alliance—to protect the lives of foreign nationals and to defend their economic interests.[6] The British asked that the ship be commanded and manned by British personnel, and although the South Australian government did not agree to the crewing request, commanding officer Chapman James Clare was temporarily demoted to second in command, with William Rooke Creswell, a British officer and Commandant of the Queensland Maritime Defence Force installed as the ship's captain.[8][9]
Protector sailed from Adelaide, flying the White Ensign, on 6 August 1900. She was temporarily commissioned as HMS Protector for legal reasons, and arrived at Hong Kong on 11 September 1900. A week later, she departed for Shanghai.[6]
In Chinese waters, the expected use of shallow draught vessels such as Protector was not called for, but she performed useful work as a survey vessel and in carrying despatches in the Gulf of Pechili. By the beginning of November, the Admiralty had decided it could dispense with her services, and she was released to return to Adelaide on 2 November 1900. During her return voyage, Protector participated in the ceremonies inaugurating the Australian Commonwealth in Sydney on 1 January 1901.
Australian Commonwealth
Protector in 1901
In 1901, Protector was transferred to the Australian Commonwealth Government and became a Commonwealth naval vessel primarily based in Sydney, New South Wales. In the years leading up to the establishment of an Australian Naval Fleet, Protector was active around the southern and eastern seaboards. Her main role was to train the Naval Militia Forces of New South Wales, Victoria, and South Australia, a duty which she continued on following the foundation of the Royal Australian Navy. From September 1913, she served as a tender to the first steam-powered Australian warship, HMAS Cerberus in Williamstown, Victoria.[3][6]
World War I
When World War I broke out in 1914, Protector was sent to Sydney and she began service as a parent/depot ship to two Australian submarines, AE1 and AE2.[10] On 28 August 1914, she sailed from Sydney as escort to the submarines headed for German New Guinea colonies. After the surrender of these colonies on 17 September, Protector remained based at Rabaul as a port guard ship until early October 1914, when she sailed for Sydney in the company of HMAS Fantome.[3][6]
Protector remained in Australian waters, mainly at Melbourne, until October 1915, when she sailed for the Cocos Islands in the Indian Ocean to report on the wreck of the German cruiser Emden. Emden had been driven ashore on North Keeling Island by HMASSydney on 9 November 1914.[3][6]
Protector returned to Australia in December 1915 and thereafter, for the remainder of the war period, was employed again as a tender to HMAS Cerberus and seagoing duty for a period as a minesweeper in Victorian coastal waters.
Between the wars
In the post war period, she continued to serve as a tender to HMAS Cerberus (the warship) at Williamstown. In May 1920, she carried the advance party to Flinders Naval depot on Westernport Bay (later renamed HMAS Cerberus Training School) in preparation for the official opening which took place on 1 September 1920.
On 1 April 1921, the Protector lost her thirty-seven-year-old identity when she was renamed HMAS Cerberus. (In turn, the then HMAS Cerberus was renamed Platypus II.)
Disposal
In June 1924, Protector's 40-year naval career came to a close when she was paid off for disposal and was sold to Mr J. Hill of Melbourne for £677 and 10 shillings. Protector was dismantled and her armament, engines and all movable parts were sold at auction. Conversion work to a lighter then took place and was completed in November 1929. Her old ammunition magazines served as a bunker for about 300tons of oil fuel.
In 1931, she was re-sold to the Victorian Lighterage Co and was renamed Sidney. For several years she served as a wool lighter.
World War II
During July 1943, Protector was requisitioned for war service by the U.S. Army. En route to New Guinea and off Gladstone, she was damaged in a collision with a tug and abandoned. The hull was subsequently taken to Heron Island off the Queensland coast and later sunk for use as a breakwater.
Present day
The remains of Protector at Heron Island in 2008 at low tide (broadside)
Following an overhaul of the RAN battle honours system, completed in March 2010, Protector was retroactively awarded the honours "China 1900" and "Rabaul 1914".[15][16]
HMQS Gayundah was a flat-iron gunboat operated by the Queensland Maritime Defence Force and later the Royal Australian Navy. She entered service in 1884 and was decommissioned and sold to a civilian company in 1921. She then served as sand and gravel barge in Brisbane until the 1950s, when she was scrapped. In 1958, Gayundah was run aground at Woody Point near Redcliffe, to serve as a breakwater structure.
HMVS Cerberus is a breastwork monitor that served in the Victoria Naval Forces, the Commonwealth Naval Forces (CNF), and the Royal Australian Navy (RAN) between 1871 and 1924.
HMAS Adelaide was a Town-class light cruiser of the Royal Australian Navy (RAN), named after Adelaide, the capital city of South Australia. Laid down in 1915, wartime shortages and design modifications meant the ship was not completed until 1922, earning her the nickname "HMAS Longdelayed".
HMAS Nestor (G02) was an N-class destroyer of the Royal Australian Navy (RAN). Built in Scotland, Nestor was commissioned in February 1941; although manned by Australians and commissioned as an Australian warship, she remained the property of the Royal Navy.
HMAS Pioneer was a Pelorus-class protected cruiser built for the Royal Navy at the end of the 19th century. She was transferred to the fledgling Royal Australian Navy (RAN) in 1912. During World War I, the cruiser captured two German merchant ships, and was involved in the East African Campaign, including the blockade of the cruiser SMS Königsberg and a bombardment of Dar-es-Salaam. She returned to Australia in late 1916 and was decommissioned. Pioneer was used as an accommodation ship for the following six years, then was stripped down and sold off by 1926. The cruiser was scuttled outside Sydney Heads in 1931.
HMAS Parramatta, named after the Parramatta River, was a River-class torpedo-boat destroyer of the Royal Australian Navy (RAN). Ordered in 1909 for the Commonwealth Naval Forces, Parramatta was the first ship launched for the RAN. Temporarily commissioned into the Royal Navy for the delivery voyage to Australia, the destroyer came under Australian naval control in 1910, and was recommissioned into the RAN on 1 March 1911, shortly before the latter's formal creation.
HMAS Stuart was a British Scott-class flotilla leader. The ship was built by Hawthorn Leslie and Company for the Royal Navy during World War I, and entered service at the end of 1918. The majority of the destroyer's British service was performed in the Mediterranean, and in 1933 she was transferred to the Royal Australian Navy. Although placed in reserve in 1938, Stuart was reactivated at the start of World War II to lead the Australian destroyer force, nicknamed the "Scrap Iron Flotilla" by German propagandists.
HMAS Swan was a River-class torpedo-boat destroyer of the Royal Australian Navy (RAN). One of six built for the RAN, Swan was built at Cockatoo Island Dockyard, and entered service in 1916. The early part of the ship's career was spent on blockade duty in the Far East, before she was transferred to the Mediterranean for anti-submarine duty. Apart from performing shore bombardment during the Second Battle of Durazzo, Swan's wartime career was uneventful. The destroyer was placed in reserve in 1920, but was reactivated between 1925 and 1927 and assigned to Tasmania. Swan was decommissioned in 1928, stripped of parts, and sold for use as prisoner accommodation on the Hawkesbury River. After changing hands several times, the hull sank during gale conditions in 1934.
HMAS Vampire was the third of three Australian-built Daring class destroyers serving in the Royal Australian Navy (RAN). One of the first all-welded ships built in Australia, she was constructed at Cockatoo Island Dockyard between 1952 and 1959, and was commissioned into the RAN a day after completion.
HMAS Yarra, named for the Yarra River, was a River-class torpedo-boat destroyer of the Royal Australian Navy (RAN). Ordered in 1909 for the Commonwealth Naval Forces, Yarra was temporarily commissioned into the Royal Navy on completion in 1910 and handed over to Australian control on arrival in Australia.
HMAS Torrens, named for the River Torrens, was a River-class torpedo-boat destroyer of the Royal Australian Navy (RAN). The destroyer was built at Cockatoo Island Dockyard and entered service with the RAN in 1916. The destroyer was first deployed to East Asia, then the Mediterranean, where she remained for the rest of World War I. After returning to Australia, the destroyer was decommissioned, but saw use in several ports for reservist training before the decision to sell her for scrap was made. After being stripped, the destroyer was towed outside Sydney Heads, used for gunnery practice, and scuttled.
Before Federation in 1901 five of the six separate colonies maintained their own naval forces for defence. The colonial navies were supported by the ships of the Royal Navy's Australian Station which was established in 1859. The separate colonies maintained control over their respective navies until 1 March 1901, when the Commonwealth Naval Forces was created.
HMQS Paluma was a flat-iron gunboat operated by the Queensland Maritime Defence Force and later the Royal Australian Navy. She entered service on 28 October 1884, was decommissioned in 1916 and then sold to the Victorian Ports and Harbours Department, who operated her under the name Rip until 1948 when she was retired. She was scrapped in 1950–51.
Two ships of the Royal Australian Navy (RAN) ships have been named HMAS Protector.
The BL 5-inch guns Mk I – Mk V were early British 5-inch rifled breechloading naval guns after it switched from rifled muzzle-loaders in the late 1870s. They were originally designed to use the old gunpowder propellants. The 5-inch calibre was soon discontinued in favour of QF 4.7-inch.
The BL 6-inch 80-pounder gun Mk I was the first generation of British 6-inch breechloading naval gun after it switched from muzzle-loaders in 1880. They were originally designed to use the old gunpowder propellants.
HMS Swinger was an Ariel-class composite gunboat of the Royal Navy, built at Pembroke Dockyard and launched on 7 February 1872. She served at first on the China Station and from 1883 on the Australia Station. She was hulked in 1895 sold for breaking in 1924.
HMAS Cerberus is the name given to a number of Royal Australian Navy ships and shore establishments, after the mythological Cerberus.
John Denzel Etoile Turner was a noted South Australian Naval officer.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
Australia
