Handy-class destroyer

Last updated

HMS Hunter 1895.jpg
HMS Hunter
Class overview
NameHandy class
Builders Fairfields, Govan
OperatorsNaval Ensign of the United Kingdom.svg  Royal Navy
Preceded by Banshee class
Succeeded by Sunfish class
Built1895
In commission1895–1914
Completed3
Retired3
General characteristics
Type Torpedo boat destroyer
Displacement275 long tons (279 t)
Length194 ft (59 m)
PropulsionThornycroft boilers, 4,000 hp (2,983 kW)
Speed27 knots (50 km/h; 31 mph)
Complement53
Armament

Three Handy-class destroyers served with the Royal Navy. Handy, Hart and Hunter were all built by Fairfield.

Contents

Design and construction

As part of the 1893–1894 Naval Estimates, the British Admiralty placed orders for 36 torpedo-boat destroyers, all to be capable of 27 knots (50 km/h; 31 mph), as a follow-on to the six prototype "26-knotters" ordered in the previous 1892–1893 Estimates. Of the 36 destroyers, three ships (Handy, Hart and Hunter) were ordered from Fairfield Shipbuilding and Engineering Company of Govan, [1] the first torpedo craft to be built by that shipyard. [2] As typical for torpedo craft at the time, the Admiralty left detailed design to the builders, laying down only broad requirements. [3] [4]

Fairfield's design was 197 feet (60.05 m) long overall and 194 feet (59.13 m) between perpendiculars, with a beam of 19 feet 5 inches (5.92 m) and a draught of 7 feet 6 inches (2.29 m). Displacement was 275 long tons (279 t) light and 310 long tons (310 t) full load, [2] while the ship's complement was 53 officers and men. [5] Three Thornycroft boilers fed steam at 215 pounds per square inch (1,480 kPa) to two 3-cylinder triple expansion steam engines rated at 4,000 indicated horsepower (3,000 kW) and driving two propeller shafts. [2] Two funnels were fitted. [6] Armament consisted of a single QF 12 pounder 12 cwt [lower-alpha 1] gun and three 6-pounder guns, with two 18 inch (450 mm) torpedo tubes. [7] As a gunboat, one of the torpedo tubes could be removed to accommodate a further two six-pounders. [8] [9] [lower-alpha 2]

In September 1913 the Admiralty re-classed all the surviving 27-knotter destroyers as A Class, although this only applied to Handy herself as the other two ships had already been sold for scrap in 1912.

See also

Related Research Articles

HMS <i>Sparrowhawk</i> (1895) Destroyer of the Royal Navy

HMS Sparrowhawk was a B-class torpedo boat destroyer of the Royal Navy. She was completed by Laird, Son & Company, Birkenhead, and was launched on 8 October 1895. She served on the China Station and was wrecked in the mouth of the Yangtze River in 1904. She was one of four Quail-class destroyers.

HMS <i>Virago</i> (1895) Destroyer of the Royal Navy

HMS Virago was a B-class torpedo boat destroyer of the British Royal Navy. She was completed by Laird Brothers, Birkenhead, in 1897. One of four Quail-class destroyers she served during the Great War and was sold off after hostilities ended.

HMS Orwell was a B-class torpedo boat destroyer of the British Royal Navy. She was built by Laird, Son & Company, and served from 1900 until 1920.

HMS Success was a B-class torpedo boat destroyer of the Royal Navy. She was launched on 21 March 1901. On 27 December 1914 she was wrecked off Fife Ness during heavy gales.

<i>Ardent</i>-class destroyer Subclass of the A-class destroyers

The three Ardent-class torpedo boat destroyers were ordered by the British Admiralty on 12 October 1893 and served with the Royal Navy. Built by Thornycroft for a contract price of £110,520 for all three vessels, they displaced 301 tons fully laden, and were 201 feet 8 inches (61.47 m) long overall.

Two Hardy-class destroyers served with the Royal Navy. HMS Hardy and HMS Haughty were both built by Doxford, ordered on 3 November 1893. They were fitted with 8 Yarrow boilers. They displaced 260 tons, were 196 feet long and were armed with one twelve pounder quick-firing gun mounted forward and five 6-pounder guns, mounted on the broadside and aft, and two torpedo tubes on a revolving mount. They carried 53 officers and men, and served in home waters before being sold off in 1911 and 1912 respectively.

HMS Hasty was a Charger-class destroyer which served with the Royal Navy. She was launched by Yarrow Shipbuilders in 1894, served in home waters and was sold off in 1912.

HMS Hardy was a Hardy-class destroyer which served with the Royal Navy. She was built by William Doxford & Sons in 1895, launched on 16 December 1895, and sold off on 11 July 1911.

HMS Porcupine was a Janus-class destroyer of the Royal Navy. She was launched by Palmers Shipbuilding and Iron Company in 1895, served in home waters and was in service during the First World War.

The Salmon class were two destroyers built by Earle's to an Admiralty specification for service with the Royal Navy.

HMS <i>Lynx</i> (1894) Ferret-class destroyer

HMS Lynx was a Ferret-class destroyer which served with the Royal Navy. She was launched in 1894 and sold in 1912.

<i>Banshee</i>-class destroyer Subclass of the A-class destroyers

The Banshee class was a class of three torpedo boat destroyers that served with the Royal Navy into the early part of the Twentieth century.

HMS <i>Banshee</i> (1894) Banshee-class destroyer

HMS Banshee was one of three Banshee-class destroyers which served with the Royal Navy.

HMS Fervent was a Fervent-class destroyer which served with the Royal Navy. Fervent was launched on 28 March 1895 at Paisley.

Two Swordfish-class destroyers served with the Royal Navy. Swordfish and Spitfire were both built by Armstrong Whitworth at Elswick, Tyne and Wear launching in 1895. Fitted with Yarrow boilers, they could make 27 knots and were armed with one twelve pounder and two torpedo tubes.

<i>Conflict</i>-class destroyer Subclass of the A-class destroyers

Three Conflict-class destroyers served with the Royal Navy. All were built by the White Shipyard.

HMS <i>Handy</i> (1895) Handy-class destroyer

HMS Handy was a Handy-class destroyer which served with the Royal Navy. Built by Fairfield Shipbuilding and Engineering Company in 1895 she spent most of her time on the China Station, and was sold in Hong Kong during the Great War.

<i>Sturgeon</i>-class destroyer Subclass of the A-class destroyers

The Sturgeon-class destroyers served with the Royal Navy from 1894; three were built by the Vickers yard and differed from other similar ships in having their mast stepped before the first funnel. They had Blechynden boilers which gave them 4,000 hp (3,000 kW) and 27 knots. They were armed with one twelve pounder and two torpedo tubes. They carried a complement of 53 officers and men.

HMS Peterel was one of two Spiteful-class destroyers to serve with the Royal Navy. She was built by Palmers, was 215 feet long and the 6,200 H.P. produced by her Reed boilers gave her a top speed of 30 knots. She was armed, as was standard, with a twelve pounder and two torpedo tubes. She served in home waters throughout the Great War and was sold off in 1919.

HMS <i>Velox</i> (1902) Destroyer of the Royal Navy

HMS Velox was a turbine-powered torpedo boat destroyer of the British Royal Navy built on speculation in 1901-04 by engineering firm Parsons Marine, with the hull subcontracted to Hawthorn Leslie and Company at Hebburn on the River Tyne. Velox served in the First World War, being sunk by striking a mine in 1915.

References

Notes

  1. "Cwt" is the abbreviation for hundredweight, 12cwt referring to the weight of the gun.
  2. While many of the 27-knotters later carried both the two torpedo tubes and all 5 six-pounder guns, stability concerns prevented Handy from following suit. [10]

Citations

  1. Lyon 2001, pp. 19–20.
  2. 1 2 3 Lyon 2001, p. 87.
  3. Chesneau and Kolesnik 1979, p. 87.
  4. Manning 1961, p. 39.
  5. Manning 1961, p. 36.
  6. Friedman 2009, p. 48.
  7. Friedman 2009, p. 291.
  8. Lyon 2001, pp. 98–99.
  9. Friedman 2009, p. 40.
  10. Lyon 2003, p. 100.

Bibliography