Holden HX

Last updated

Holden HX
Holden Kingswood HX (15247601123).jpg
Holden Kingswood Sedan
Overview
Manufacturer Holden (General Motors)
ProductionJuly 1976–October 1977
Assembly Elizabeth, South Australia
Dandenong, Victoria, Australia
Pagewood, New South Wales, Australia
Trentham, New Zealand
Body and chassis
Class Full-size
Body style 4-door sedan
4-door station wagon
2-door coupe
2-door coupe utility
2-door panel van
2-door chassis cab
Related Statesman HX
Powertrain
Engine I6
  • 3.3 L 88 kW (118 hp) Red

V8

  • 4.2 L 120 kW (161 hp) Red
  • 5.0 L 161 kW (216 hp) Red
Transmission 4-speed manual
3-speed automatic
Dimensions
Wheelbase 2,819 mm (111.0 in) (sedan)
2,896 mm (114.0 in) (wagon)
Chronology
Predecessor Holden HJ
Successor Holden HZ

The Holden HX is a range of automobiles which was produced by Holden in Australia from 1976 to 1977.

Contents

Changes

The HX series was released in July 1976 [1] and featured a range of models developed from those in the superseded Holden HJ range, which had been in production since 1974. The HX models featured only minor updates to the exterior, notably the grille and badgework. [1] However significant changes were made to the engines to meet new Australian emissions regulations. [2] During the course of the HX series, front bucket seats were adopted as standard equipment for Kingswood-badged vehicles.

Model range

The mainstream passenger car range consisted of 4-door sedan and 5-door wagon body styles in three trim levels.

The Premier models were differentiated from the cheaper variants by a four headlight frontal treatment. [3] Wagons rode on a wheelbase which was 76 mm (three inches) longer than that of the sedans.

Two special-build HX Kingswood variants emerged later in production. A Kingswood Silver Anniversary model was released in November 1976 to celebrate 50 years of General Motors in Australia and a Kingswood Deluxe sedan and wagon was also introduced during the HX model life in September 1977 with a 4.2 litre V8 as standard.

For the HX series the performance oriented Monaro range was reduced to one model only, the Monaro GTS Sedan. The Monaro LS & GTS coupes were not carried in from the HJ series however a Holden Limited Edition coupe was released in September 1976. [4] This utilised the Monaro coupe body but not the Monaro name.

The commercial vehicle range included coupe utility, panel van and cab chassis truck models:

The base models were marketed simply as the Holden Ute and Holden Van and both retained the HJ style grille. The Kingswood Van was an addition to the commercial vehicle range [1] and the One Tonner was a chassis cab vehicle which featured its own unique frontal treatment, carried over from its HJ predecessor.

The Sandman Ute and Van were equipped with various features from the Monaro GTS and featured side stripes and a large 'Sandman' logo on the tailgate.

Engines

A 3.3-litre inline six-cylinder engine was available, as were 4.2-litre and 5.0-litre V8s. All were modified low-emission units to comply with the new ADR27A regulations, and were notably less powerful than their predecessors. [2] The 2.8-litre inline six available in the HJ series had been deleted, and the Monaro GTS and Holden Limited Edition models were only offered with the eight-cylinder engines.

Production

The Holden HX was replaced by the Holden HZ series in October 1977, [5] HX production having totalled 110,669 units. [1]

Statesman HX

1976-1977 Statesman HX Caprice 1976-1977 Statesman HX Caprice sedan 01.jpg
1976–1977 Statesman HX Caprice

The Statesman HX range of long-wheelbase luxury sedans developed from the Holden HX series was also released in July 1976. Like their HJ predecessors, the two models in the Statesman HX range, the de Ville and the Caprice, were marketed as Statesmans rather than as Holdens.

Related Research Articles

<span class="mw-page-title-main">Holden Monaro</span> Motor vehicle

The Holden Monaro is a rear-wheel drive coupé manufactured by General Motors Holden in Australia from 1968 to 1975 and later reintroduced from 2001 to 2005. It was also manufactured as a 4-door sedan from 1973 to 1977.

<span class="mw-page-title-main">Holden Special Vehicles</span> Division of Holden

Holden Special Vehicles (HSV) was the officially designated performance vehicle division for Holden. Established in 1987 and based in Clayton, Victoria, the privately owned company modified Holden models such as the standard wheelbase Commodore, long wheelbase Caprice and Statesman, and commercial Ute for domestic and export sale. HSV also modified other non-Holden cars within the General Motors lineup in low volumes.

<span class="mw-page-title-main">Holden Kingswood</span> Motor vehicle

The Holden Kingswood is a full-size car that was manufactured in Australia by GM Holden, from the beginning of the HK series in 1968 through to the conclusion of the WB series in 1984. Prior to 1968, the full-size Holden range of family cars comprised the Holden Standard, the Holden Special, and Holden Premier models. Initially, the HK range of models included the basic Holden Belmont, the Kingswood, and the luxury-oriented Holden Premier, all of which were manufactured in a choice of sedan and station wagon bodies. Commercial variants were offered in three types: coupé utility, panel van, and later from 1971, a heavy-duty Holden One Tonner cab chassis. The utility (ute) version was originally marketed in both Belmont and Kingswood configurations. However, after the Belmont name was deleted from commercials at the end of HQ in late 1974, the base model commercials were sold only with the "Holden" badge.

<span class="mw-page-title-main">Holden Sandman</span> Motor vehicle

The Holden Sandman is a sports coupé utility produced between 1974 and 1980 by General Motors' Australian subsidiary Holden and became known throughout the 1970s as "Shaggin' Wagons", given their popularity amongst teenage couples, identified by their bright paint jobs and distinguishable stripes, and later the colourful "SANDMAN" lettering covering the tailgate, the Sandman was Holden's answer to a Panel Van and Utility variant of the popular GTS variants of the Sedan and Monaro Coupé, The sandman came standard with the GTS' sports style gauge cluster, sports steering wheel, bucket seats, along with a fully furnished interior, and the exterior consisting of rally wheels, GTS style guards, "Sandman" Logo painted on B pillars for utes and in approximately the same spot on panel vans and exclusive vinyl stripes, the Sandman came with a standard 173 cubic inch "red" inline 6, however most were optioned with either a 253, or 308 cubic inch Holden V8, backed by either a 4 speed manual (Standard) or 3 Speed 'Tri-Matic' Automatic, both controlled through a console mounted floorshift.

<span class="mw-page-title-main">Panel van</span> Cargo vehicle based on passenger car chassis

A panel van, also known as a blind van, car-derived van or sedan delivery, is a small cargo vehicle with a passenger car chassis, typically with a single front bench seat and no side windows behind the B-pillar. Panel vans are smaller than panel trucks or cargo vans, both of which use body-on-frame truck chassis.

<span class="mw-page-title-main">Holden (automobile)</span> Motor vehicle

The Holden was a full-sized car produced by the company of the same name across 5 generations from 1948 until 1984. The Holden is also commonly referred to by their model designation and also the H Series. The Holden was introduced to be Australia's car, being the first full scale produced automobile exclusive to the country. Prior to which, General Motors Holden's Ltd. assembled imported CKD kits from overseas General Motors subsidiaries such as Chevrolet, Buick, Vauxhall and more. And the only other cars built in the country being Ford and Chrysler vehicle bodies fitted to imported chassis. The Holden was an instant success among Australians, being the first production car built solely for Australia's unique, rough roads.

<span class="mw-page-title-main">Holden Special</span> Motor vehicle

The Holden Special is a mid-size car that was manufactured by Holden for Australasia. Introduced as the top-level trim in the new Holden FJ range of 1953, the Special was complemented by the entry-level Holden Standard and the mid-range Holden Business. The Business was in fact already available, introduced in July 1953 in the 48 series first seen in 1948. Three months later, the FJ was introduced, therefore forming a three-model lineup based around one car. A "Standard"-type variant also existed in the 48 series, but had been marketed simply as the "Holden".

<span class="mw-page-title-main">Holden Commodore (VT)</span> Motor vehicle

The Holden Commodore (VT) is an executive car that was produced by Holden from 1997 to 2000. It was the first iteration of the third generation of the Commodore and the last one to be powered by a locally made V8 engine (1998). Its range included the luxury variants, Holden Berlina (VT) and Holden Calais (VT) but not a new generation utility version.

<span class="mw-page-title-main">Statesman (automobile)</span> Automotive marque created in 1971 by General Motors Holden

Statesman is an automotive marque created in 1971 by the Australian General Motors subsidiary, Holden. Statesman vehicles were sold through Holden dealerships, and were initially based on the mainstream Holden HQ station wagon platform, thereby providing more interior room and generally more luxurious features than their Holden-branded sedan siblings. Production ceased with the last of the WB series cars in December 1984.

<span class="mw-page-title-main">Holden HQ</span> Motor vehicle

The Holden HQ series is a range of automobiles that was produced by Holden in Australia from 1971 to 1974. The HQ was released on 15 July 1971, replacing the Holden HG series. It was the first ground-up redesign of the Holden line since its original release in 1948, and included an all-new body, chassis, and suspension. The HQ was later developed into a series of successor models, finally ending production when the WB series was discontinued in 1984.

<span class="mw-page-title-main">Holden HK</span> Motor vehicle

The Holden HK series is an automobile which was produced by Holden in Australia from 1968 to 1969. Introduced in January 1968, the HK range progressively replaced the Holden HR series which had been in production since 1966. HK models were both larger and heavier than their predecessors and the range would ultimately include thirteen different models against the eight of the HR range. The Holden HK was marketed under Belmont, Kingswood, Premier, Brougham and Monaro model names.

<span class="mw-page-title-main">Holden HJ</span> Motor vehicle

The Holden HJ is a series of automobiles which were produced by Holden in Australia from 1974 to 1976. The HJ series was released on 4 October 1974 and was an improved and facelifted version of the superseded Holden HQ series which had been in production since 1971.

<span class="mw-page-title-main">Holden HZ</span> Motor vehicle

Holden HZ is a full-sized automobile which was produced in Australia between October 1977 and April 1980 by Holden in a variety of equipment levels and in several different body styles. It was also assembled in New Zealand.

<span class="mw-page-title-main">Holden WB</span> Motor vehicle

The Holden WB series is an automobile which was produced by Holden in Australia from 1980 to 1984. It is a facelifted version of the Holden HZ series, which it replaced. Unlike the HZ and every other full size Holden series before it, the Holden WB was only offered in commercial vehicle bodystyles with no sedan or wagon passenger car variants. The long-wheelbase WB series models were marketed under the separate Statesman marque, absent of all Holden branding.

<span class="mw-page-title-main">Holden HT</span> Motor vehicle

The Holden HT series is a range of automobiles which was produced by Holden in Australia between 1969 and 1970.

<span class="mw-page-title-main">Holden HG</span> Motor vehicle

The Holden HG is an automobile which was produced by Holden in Australia between 1970 and 1971. It was marketed under Belmont, Kingswood, Premier, Brougham and Monaro model names.

<span class="mw-page-title-main">Holden HD</span> Motor vehicle

The Holden HD series is a range of automobiles which were produced by Holden in Australia from 1965 to 1966.

<span class="mw-page-title-main">Holden HR</span> Motor vehicle

The Holden HR is an automobile that was produced by Holden in Australia from 1966 to 1968.

References

  1. 1 2 3 4 Norm Darwin, 100 Years of GM in Australia, 2002, page 264
  2. 1 2 The Holden Heritage, Eighth Edition, 1998, pages 50-51
  3. Norm Darwin, 100 Years of GM in Australia, 2002, page 265
  4. Norm Darwin, 100 Years of GM in Australia, 2002, page 267
  5. Norm Darwin, 100 Years of GM in Australia, 2002, page 268