| Impulsoria | |||||||||
|---|---|---|---|---|---|---|---|---|---|
 Impulsoria in 1850 | |||||||||
| |||||||||
| |||||||||
| |||||||||
| |||||||||
The Impulsoria was a locomotive constructed in 1850 that was powered via a gearbox by two to four horses on a treadmill following a design by Clemente Masserano. It undertook trials in London in 1850 and was exhibited at The Great Exhibition in 1851.
The invention of a successful mobile treadmill powered locomotive was made by Clemente Masserano from Pignerol in Italy. The idea was not new, but previous attempts in England, France, and Spain were unsuccessful. [1] Using Masserano's designs, Impulsoria was built in Italy and transported to England. [1] A syndicate was formed and it was trialled at the Nine Elms terminus of the South Western Railway line in London where it successfully completed a hill climb. The trials were supported by the directors of the South Western Railway and assisted by their Chief Engineer John Gooch. The device was said to be much cheaper to run than a steam locomotive. The device allowed a steam locomotive to be replaced by this vehicle, which used the power of two or four horses that had to walk up a treadmill, called a pedivella by Masserano. [1] The power was transferred to the wheels by chains [2] and a gearbox that allowed it to climb. It was said to be able to pull 30 wagons up an incline and could be used with two or four horses. [3]
The gear box allowed the horses to always walk at their best speed whilst the vehicle could then have a range of speeds and torques. Because of the gears, the top speed was not limited to the top speed of the horses. The gearbox allowed the horses to drive the vehicle in forward as well as reverse directions, and it was also possible to disengage the drive so that the vehicle could stop whilst the horses continued to walk up the treadmill. The vehicle travelled at 7 mph (11 km/h) during the trials, but it was thought that a final version would reach 15 to 20 mph (24 to 32 km/h) and would outrun a steam engine. [1]
The efficiency of the device was compared favourably with existing steam locomotives, which were thought to waste too much energy. The cost of operating the Impulsoria was estimated at two shillings per day per horse. During that eight-hour day it was estimated that the horses could propel Impulsoria eight times over a thirty-mile route. [1]
An Italian Professor of Philosophy, Dr Andrea Crestadoro, improved the design of this unusual device, and later took out related patents in 1852. [4] With his improvements, he exhibited it at The Great Exhibition at the Crystal Palace in 1851. [4] He subsequently took an interest in bibliography and became a librarian in Manchester. A similar vehicle, also called Impulsoria, was exhibited in 1853 in Germany and said to be the property of a Mr. Steinheil. [5]
A locomotive or engine is a rail transport vehicle that provides the motive power for a train. If a locomotive is capable of carrying a payload, it is usually rather referred to as a multiple unit, motor coach, railcar or power car; the use of these self-propelled vehicles is increasingly common for passenger trains, but rare for freight.
A steam engine is a heat engine that performs mechanical work using steam as its working fluid. The steam engine uses the force produced by steam pressure to push a piston back and forth inside a cylinder. This pushing force can be transformed, by a connecting rod and crank, into rotational force for work. The term "steam engine" is generally applied only to reciprocating engines as just described, not to the steam turbine. Steam engines are external combustion engines, where the working fluid is separated from the combustion products. The ideal thermodynamic cycle used to analyze this process is called the Rankine cycle. In general usage, the term steam engine can refer to either complete steam plants, such as railway steam locomotives and portable engines, or may refer to the piston or turbine machinery alone, as in the beam engine and stationary steam engine.
A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material to heat water in the locomotive's boiler to the point where it becomes gaseous and its volume increases 1,700 times. Functionally, it is a steam engine on wheels.
A railcar is a self-propelled railway vehicle designed to transport passengers. The term "railcar" is usually used in reference to a train consisting of a single coach, with a driver's cab at one or both ends. Some railway companies, such as the Great Western, termed such vehicles "railmotors".
A geared steam locomotive is a type of steam locomotive which uses gearing, usually reduction gearing, in the drivetrain, as opposed to the common directly driven design.
A diesel locomotive is a type of railway locomotive in which the prime mover is a diesel engine. Several types of diesel locomotives have been developed, differing mainly in the means by which mechanical power is conveyed to the driving wheels.
A traction engine is a steam-powered tractor used to move heavy loads on roads, plough ground or to provide power at a chosen location. The name derives from the Latin tractus, meaning 'drawn', since the prime function of any traction engine is to draw a load behind it. They are sometimes called road locomotives to distinguish them from railway locomotives – that is, steam engines that run on rails.
In 1933, the Great Western Railway introduced the first of what was to become a very successful series of diesel railcars, which survived in regular use into the 1960s, when they were replaced with the new British Rail "first generation" type diesel multiple units.
The Locomotive Acts were a series of Acts of Parliament in the United Kingdom regulating the use of mechanically propelled vehicles on British public highways during the latter part of the 19th century.
Cycloped was an early horse-powered locomotive, built by Thomas Shaw Brandreth of Liverpool, which competed unsuccessfully in the Rainhill trials of October 1829.
A steam turbine locomotive is a steam locomotive which transmits steam power to the wheels via a steam turbine. Numerous attempts at this type of locomotive were made, mostly without success. In the 1930s this type of locomotive was seen as a way both to revitalize steam power and challenge the diesel locomotives then being introduced.
Motor Rail was a British locomotive-building company, originally based in Lewes, Sussex, they moved in 1916 to Bedford. Loco manufacture ceased in 1987, and the business line sold to Alan Keef Ltd of Ross-on-Wye, who continue to provide spares and have built several locomotives to Motor Rail designs.
British Railways 10100 was an unusual experimental diesel locomotive known informally as The Fell Diesel Locomotive. It was the joint production of Davey Paxman & Co, Shell Refining & Marketing Co and Lt-Col L. F. R. Fell, built for them by the London, Midland and Scottish Railway at Derby. Sir Harry Ricardo was also involved. By the time it emerged in 1950, nationalisation had taken place and it carried British Railways livery. The locomotive had six diesel engines, four of them used for traction. There were two auxiliary engines, both of which were 150 hp (110 kW) AEC 6-cylinder units, and these drove the pressure-chargers for the main engines and the purpose of this arrangement was to enable the main engines to deliver very high torque at low crankshaft speed.
The history of steam road vehicles comprises the development of vehicles powered by a steam engine for use on land and independent of rails, whether for conventional road use, such as the steam car and steam waggon, or for agricultural or heavy haulage work, such as the traction engine.
London and North Western Railway (LNWR) 2-2-2 No. 3020 Cornwall is a preserved steam locomotive. She was built at Crewe in 1847. She was originally a 4-2-2 in 1847, but was extensively rebuilt, and converted to a 2-2-2 in 1858.
Dr. Andrea Crestadoro (1808–1879) was a bibliographer who became Chief Librarian of Manchester Free Library, 1864–1879. He is credited with being the first person to propose that books could be catalogued by using keywords that did not occur in the title of the book. His ideas also included a metallic balloon, reform of the tax system, and improvements to a railway locomotive – the Impulsoria – that was powered by four horses on a treadmill.
James & Fred Howard of Britannia Ironworks, Bedford, later known simply as Howards, were one of the largest English makers of agricultural equipment, steam traction engines, and light railway equipment. At The Great Exhibition of 1851 they exhibited a range of horse-drawn implements. After World War I, Howards became part of AGE, Agricultural & General Engineers, along with many of the other British makers of similar machinery.
A steam motor is a form of steam engine used for light locomotives and light self-propelled motor cars used on railways. The origins of steam motor cars for railways go back to at least the 1850s, if not earlier, as experimental economizations for railways or railroads with marginal budgets. These first examples, at least in North America, appear to have been fitted with light reciprocating engines, and either direct or geared drives, or geared-endless chain drives. Most incorporated a passenger carrying coach attached to the engine and its boiler. Boiler types varied in these earlier examples, with vertical boilers dominant in the first decade and then with very small diameter horizontal boilers. Other examples of steam motor cars incorporated an express-baggage or luggage type car body, with coupling apparatus provided to allow the steam motor car to draw a light passenger coach. An early example with the all-in-one was photographed working on the Nashville, Chattanooga & St. Louis Railroad during the American Civil War, in Tennessee, circa 1863-64. One American firm, Grice & Long, devised various versions in the mid-1860s for use on suburban and city street railways, using their proprietary mechanical patents. In the 1930s some highly evolved steam motors represented one of the final developments of the steam locomotive. The concurrent development of internal combustion-powered or electric-motored railway motor cars proved most popular circa 1900-1950s and those obviating the need for steam-powered cars.
The Flying Dutchman was an American horse-powered locomotive operated by the South Carolina Canal and Railroad Company. It was built in New York by engineer Christian Edward Detmold and won an 1830 locomotive competition. Driven by a horse on a treadmill, it could carry 12 passengers at a speed of around 12 miles per hour (19 km/h). The South Carolina Canal and Railroad Company operated the Flying Dutchman on a 6-mile (9.7 km) stretch of track from early 1830. It was replaced by a steam-powered locomotive, the Best Friend of Charleston, by the end of the year.