Indexing (motion)

Last updated

Indexing in reference to motion is moving (or being moved) into a new position or location quickly and easily but also precisely. When indexing a machine part, its new location is known to within a few hundredths of a millimeter (thousandths of an inch), or often even to within a few thousandths of a millimeter (ten-thousandths of an inch), despite the fact that no elaborate measuring or layout was needed to establish that location. In reference to multi-edge cutting inserts, indexing is the process of exposing a new cutting edge for use. Indexing is a necessary kind of motion in many areas of mechanical engineering and machining. An object that indexes, or can be indexed, is said to be indexable.

Contents

Usually when the word indexing is used, it refers specifically to rotation. That is, indexing is most often the quick and easy but precise rotation of a machine part through a certain known number of degrees. For example, Machinery's Handbook , 25th edition, in its section on milling machine indexing, [1] says, "Positioning a workpiece at a precise angle or interval of rotation for a machining operation is called indexing." [2] In addition to that most classic sense of the word, the swapping of one part for another, or other controlled movements, are also sometimes referred to as indexing, even if rotation is not the focus.

Examples from everyday life

There are various examples of indexing that laypersons (non-engineers and non-machinists) can find in everyday life. These motions are not always called by the name indexing, but the idea is essentially similar:

Manufacturing applications

Indexing is vital in manufacturing, especially mass production, where a well-defined cycle of motions must be repeated quickly and easily—but precisely—for each interchangeable part that is made. Without indexing capability, all manufacturing would have to be done on a craft basis, and interchangeable parts would have very high unit cost because of the time and skill needed to produce each unit. In fact, the evolution of modern technologies depended on the shift in methods from crafts (in which toolpath is controlled via operator skill) to indexing-capable toolpath control. A prime example of this theme was the development of the turret lathe, whose turret indexes tool positions, one after another, to allow successive tools to move into place, take precisely placed cuts, then make way for the next tool.

How indexing is achieved in manufacturing

Indexing capability is provided in two fundamental ways: with or without Information technology (IT).

Non-IT-assisted physical guidance

Non-IT-assisted physical guidance was the first means of providing indexing capability, via purely mechanical means. It allowed the Industrial Revolution to progress into the Machine Age. It is achieved by jigs, fixtures, and machine tool parts and accessories, which control toolpath by the very nature of their shape, physically limiting the path for motion. Some archetypal examples, developed to perfection before the advent of the IT era, are drill jigs, the turrets on manual turret lathes, indexing heads for manual milling machines, rotary tables, and various indexing fixtures and blocks that are simpler and less expensive than indexing heads, and serve quite well for most indexing needs in small shops. [3] Although indexing heads of the pre-CNC era are now mostly obsolete in commercial manufacturing, the principle of purely mechanical indexing is still a vital part of current technology, in concert with IT, even as it has been extended to newer uses, such as the indexing of CNC milling machine toolholders or of indexable cutter inserts, whose precisely controlled size and shape allows them to be rotated or replaced quickly and easily without changing overall tool geometry.

IT-assisted physical guidance

IT-assisted physical guidance (for example, via NC, CNC, or robotics) has been developed since the World War II era and uses electromechanical and electrohydraulic servomechanisms to translate digital information into position control. These systems also ultimately physically limit the path for motion, as jigs and other purely mechanical means do; but they do it not simply through their own shape, but rather using changeable information.

Related Research Articles

Lathe Machine tool which rotates the work piece on its axis

A lathe is a machine tool that rotates a workpiece about an axis of rotation to perform various operations such as cutting, sanding, knurling, drilling, deformation, facing, and turning, with tools that are applied to the workpiece to create an object with symmetry about that axis.

Machine tool Metalworking machine

A machine tool is a machine for handling or machining metal or other rigid materials, usually by cutting, boring, grinding, shearing, or other forms of deformation. Machine tools employ some sort of tool that does the cutting or shaping. All machine tools have some means of constraining the workpiece and provide a guided movement of the parts of the machine. Thus the relative movement between the workpiece and the cutting tool is controlled or constrained by the machine to at least some extent, rather than being entirely "offhand" or "freehand". It is a power driven metal cutting machine which assists in managing the needed relative motion between cutting tool and the job that changes the size and shape of the job material.

Mastercam is a suite of Computer-Aided Manufacturing (CAM) and CAD/CAM software applications. Founded in MA in 1983, CNC Software, Inc. is one of the oldest developers of PC-based computer-aided design / computer-aided manufacturing (CAD/CAM) software. They are one of the first to introduce CAD/CAM software designed for both machinists and engineers. Mastercam, CNC Software’s main product, started as a 2D CAM system with CAD tools that let machinists design virtual parts on a computer screen and also guided computer numerical controlled (CNC) machine tools in the manufacture of parts. Since then, Mastercam has grown into the most widely used CAD/CAM package in the world. CNC Software, Inc. is now located in Tolland, Connecticut.

Shaper Machine that uses linear motion to cut

A shaper is a type of machine tool that uses linear relative motion between the workpiece and a single-point cutting tool to machine a linear toolpath. Its cut is analogous to that of a lathe, except that it is (archetypally) linear instead of helical.

Machinist

A machinist is a tradesperson or trained professional, who not only operates machine tools, but has the knowledge of tooling and materials required to create set ups on machine tools including, but not limited to milling machines, grinders, lathes, and drilling machines.

Numerical control Computer control of machine tools, lathes and milling machines, also used on 3D printers

Numerical control is the automated control of machining tools by means of a computer. A CNC machine processes a piece of material to meet specifications by following a coded programmed instruction and without a manual operator directly controlling the machining operation.

Geneva drive

The Geneva drive or Maltese cross is a gear mechanism that translates a continuous rotation movement into intermittent rotary motion.

G-code is the most widely used computer numerical control (CNC) programming language. It is used mainly in computer-aided manufacturing to control automated machine tools, and has many variants.

Chuck (engineering) Clamp used to hold an object with radial symmetry, especially a cylinder

A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill or a mill, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece.

Turning

Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helix toolpath by moving more or less linearly while the workpiece rotates.

Metal lathe

A metal lathe or metalworking lathe is a large class of lathes designed for precisely machining relatively hard materials. They were originally designed to machine metals; however, with the advent of plastics and other materials, and with their inherent versatility, they are used in a wide range of applications, and a broad range of materials. In machining jargon, where the larger context is already understood, they are usually simply called lathes, or else referred to by more-specific subtype names. These rigid machine tools remove material from a rotating workpiece via the movements of various cutting tools, such as tool bits and drill bits.

Indexing head

An indexing head, also known as a dividing head or spiral head, is a specialized tool that allows a workpiece to be circularly indexed; that is, easily and precisely rotated to preset angles or circular divisions. Indexing heads are usually used on the tables of milling machines, but may be used on many other machine tools including drill presses, grinders, and boring machines. Common jobs for a dividing head include machining the flutes of a milling cutter, cutting the teeth of a gear, milling curved slots, or drilling a bolt hole circle around the circumference of a part.

Turret lathe

The turret lathe is a form of metalworking lathe that is used for repetitive production of duplicate parts, which by the nature of their cutting process are usually interchangeable. It evolved from earlier lathes with the addition of the turret, which is an indexable toolholder that allows multiple cutting operations to be performed, each with a different cutting tool, in easy, rapid succession, with no need for the operator to perform set-up tasks in between or to control the toolpath. The latter is due to the toolpath's being controlled by the machine, either in jig-like fashion, via the mechanical limits placed on it by the turret's slide and stops, or via electronically-directed servomechanisms for computer numerical control lathes.

Tool and die maker

Tool and die makers are a class of machinists in the manufacturing industries. Variations on the name include tool maker,toolmaker, die maker,diemaker, mold maker,moldmaker or tool jig and die-maker, or Fitter, depending on which area of concentration or industry an individual works in.

The jig borer is a type of machine tool invented at the end of World War I to make possible the location of hole centers quickly and precisely. It was invented independently in Switzerland and the United States. It resembles a specialized species of milling machine that provides tool and die makers with a higher degree of positioning precision (repeatability) and accuracy than those provided by general machines. Although capable of light milling, a jig borer is more suited to highly accurate drilling, boring, and reaming, where the quill or headstock does not see the significant side loading that it would with mill work. The result is a machine designed more for location accuracy than heavy material removal.

Backlash (engineering) clearance between mating components

In mechanical engineering, backlash, sometimes called lash or play, is a clearance or lost motion in a mechanism caused by gaps between the parts. It can be defined as "the maximum distance or angle through which any part of a mechanical system may be moved in one direction without applying appreciable force or motion to the next part in mechanical sequence."p. 1-8 An example, in the context of gears and gear trains, is the amount of clearance between mated gear teeth. It can be seen when the direction of movement is reversed and the slack or lost motion is taken up before the reversal of motion is complete. It can be heard from the railway couplings when a train reverses direction. Another example is in a valve train with mechanical tappets, where a certain range of lash is necessary for the valves to work properly.

Threading is the process of creating a screw thread. More screw threads are produced each year than any other machine element. There are many methods of generating threads, including subtractive methods ; deformative or transformative methods ; additive methods ; or combinations thereof.

Fay automatic lathe

The Fay automatic lathe was an automatic lathe tailored to cutting workpieces that were mounted on centers. It could also do chucking work. Examples of workpieces included automotive steering knuckles and transmission gears, and such work done on mandrels as flanges, disks, and hubs. The machine tool was developed by F.C. Fay of Philadelphia and improved by Otto A. Schaum. It was originally manufactured by the Fay & Scott Machine Shop. James Hartness acquired manufacturing rights on behalf of the Jones & Lamson Machine Company and manufactured an improved version, developed under the management of Ralph Flanders.

Automatic lathe

In metalworking and woodworking, an automatic lathe is a lathe with an automatically controlled cutting process. Automatic lathes were first developed in the 1870s and were mechanically controlled. From the advent of NC and CNC in the 1950s, the term automatic lathe has generally been used for only mechanically controlled lathes, although some manufacturers market Swiss-type CNC lathes as 'automatic'.

Milling (machining) Removal of material from a workpiece using rotating tools

Milling is the process of machining using rotary cutters to remove material by advancing a cutter into a workpiece. This may be done varying direction on one or several axes, cutter head speed, and pressure. Milling covers a wide variety of different operations and machines, on scales from small individual parts to large, heavy-duty gang milling operations. It is one of the most commonly used processes for machining custom parts to precise tolerances.

References

  1. ↑ Machinery's Handbook (1996), pp. 1873–1916.
  2. ↑ Machinery's Handbook (1996), p. 1873.
  3. ↑ Bulgin 2011

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.