Inter-protocol exploitation

Last updated

Inter-protocol exploitation is a class of security vulnerabilities that takes advantage of interactions between two communication protocols, [1] for example the protocols used in the Internet. It is commonly discussed in the context of the Hypertext Transfer Protocol (HTTP). [2] This attack uses the potential of the two different protocols meaningfully communicating commands and data.

Contents

It was popularized in 2007 and publicly described in research [3] of the same year. The general class of attacks that it refers to has been known since at least 1994 (see the Security Considerations section of RFC 1738).

Internet Protocol implementations allow for the possibility of encapsulating exploit code to compromise a remote program that uses a different protocol. Inter-protocol exploitation can utilize inter-protocol communication to establish the preconditions for launching an inter-protocol exploit. For example, this process could negotiate the initial authentication communication for a vulnerability in password parsing. Inter-protocol exploitation is where one protocol attacks a service running a different protocol. This is a legacy problem because the specifications of the protocols did not take into consideration an attack of this type.

Technical details

The two protocols involved in the vulnerability are termed the carrier and target. The carrier encapsulates the commands and/or data. The target protocol is used for communication to the intended victim service. Inter-protocol communication will be successful if the carrier protocol can encapsulate the commands and/or data sufficiently to meaningfully communicate to the target service. [4]

Two preconditions need to be met for successful communication across protocols: encapsulation and error tolerance. The carrier protocol must encapsulate the data and commands in a manner that the target protocol can understand. It is highly likely that the resulting data stream with induce parsing errors in the target protocol.

The target protocol be must be sufficiently forgiving of errors. During the inter-protocol connection it is likely that a percentage of the communication will be invalid and cause errors. To meet this precondition, the target protocol implementation must continue processing despite these errors.

Current implications

One of the major points of concern is the potential for this attack vector to reach through firewalls and DMZs. Inter-protocol exploits can be transmitted over HTTP and launched from web browsers on an internal subnet. An important point is the web browser is not exploited through any conventional means. [4]

Example

JavaScript delivered over HTTP and communicating over the IRC protocol.

varform=document.createElement('form');form.setAttribute('method','post');form.setAttribute('action','http://irc.example.net:6667');form.setAttribute('enctype','multipart/form-data');vartextarea=document.createElement('textarea');textarea.innerText="USER A B C D \nNICK turtle\nJOIN #hack\nPRIVMSG #hackers: I like turtles\n";form.appendChild(textarea);document.body.appendChild(form);form.submit();

Known examples of the vulnerability were also demonstrated on files constructed to be valid HTML code and BMP image at the same time. [5] [6] [7]

Related Research Articles

<span class="mw-page-title-main">Exploit (computer security)</span> Compromising a computer system

An exploit is a piece of software, a chunk of data, or a sequence of commands that takes advantage of a bug or vulnerability to cause unintended or unanticipated behavior to occur on computer software, hardware, or something electronic. Such behavior frequently includes things like gaining control of a computer system, allowing privilege escalation, or a denial-of-service attack. In lay terms, some exploit is akin to a 'hack'.

<span class="mw-page-title-main">Internet Relay Chat</span> Protocol for real-time Internet chat and messaging

Internet Relay Chat (IRC) is a text-based chat system for instant messaging. IRC is designed for group communication in discussion forums, called channels, but also allows one-on-one communication via private messages as well as chat and data transfer, including file sharing.

Telnet is a client/server application protocol that provides access to virtual terminals of remote systems on local area networks or the Internet. Telnet consists of two components: (1) the protocol itself which specifies how two parties to communicate and (2) the software application that provides the service. User data is interspersed in-band with Telnet control information in an 8-bit byte oriented data connection over the Transmission Control Protocol (TCP). Telnet was developed in 1969 beginning with RFC 15, extended in RFC 855, and standardized as Internet Engineering Task Force (IETF) Internet Standard STD 8, one of the first Internet standards. Telnet transmits all information including usernames and passwords in plaintext so it is not recommended for security-sensitive applications such as remote management of routers. Telnet's use for this purpose has waned significantly in favor of SSH. Some extensions to Telnet which would provide encryption have been proposed.

<span class="mw-page-title-main">Denial-of-service attack</span> Cyber attack disrupting service by overloading the provider of the service

In computing, a denial-of-service attack is a cyber-attack in which the perpetrator seeks to make a machine or network resource unavailable to its intended users by temporarily or indefinitely disrupting services of a host connected to a network. Denial of service is typically accomplished by flooding the targeted machine or resource with superfluous requests in an attempt to overload systems and prevent some or all legitimate requests from being fulfilled.

In computing, Internet Protocol Security (IPsec) is a secure network protocol suite that authenticates and encrypts packets of data to provide secure encrypted communication between two computers over an Internet Protocol network. It is used in virtual private networks (VPNs).

<span class="mw-page-title-main">Cross-site scripting</span> Computer security vulnerability

Cross-site scripting (XSS) is a type of security vulnerability that can be found in some web applications. XSS attacks enable attackers to inject client-side scripts into web pages viewed by other users. A cross-site scripting vulnerability may be used by attackers to bypass access controls such as the same-origin policy. Cross-site scripting carried out on websites accounted for roughly 84% of all security vulnerabilities documented by Symantec up until 2007. XSS effects vary in range from petty nuisance to significant security risk, depending on the sensitivity of the data handled by the vulnerable site and the nature of any security mitigation implemented by the site's owner network.

Direct Client-to-Client (DCC) is an IRC-related sub-protocol enabling peers to interconnect using an IRC server for handshaking in order to exchange files or perform non-relayed chats. Once established, a typical DCC session runs independently from the IRC server. Originally designed to be used with ircII it is now supported by many IRC clients. Some peer-to-peer clients on napster-protocol servers also have DCC send/get capability, including TekNap, SunshineUN and Lopster. A variation of the DCC protocol called SDCC, also known as DCC SCHAT supports encrypted connections. An RFC specification on the use of DCC does not exist.

<span class="mw-page-title-main">SQL injection</span> Computer hacking technique

In computing, SQL injection is a code injection technique used to attack data-driven applications, in which malicious SQL statements are inserted into an entry field for execution. SQL injection must exploit a security vulnerability in an application's software, for example, when user input is either incorrectly filtered for string literal escape characters embedded in SQL statements or user input is not strongly typed and unexpectedly executed. SQL injection is mostly known as an attack vector for websites but can be used to attack any type of SQL database.

<span class="mw-page-title-main">Botnet</span> Collection of compromised internet-connected devices controlled by a third party

A botnet is a group of Internet-connected devices, each of which runs one or more bots. Botnets can be used to perform Distributed Denial-of-Service (DDoS) attacks, steal data, send spam, and allow the attacker to access the device and its connection. The owner can control the botnet using command and control (C&C) software. The word "botnet" is a portmanteau of the words "robot" and "network". The term is usually used with a negative or malicious connotation.

Client-to-client protocol (CTCP) is a special type of communication between Internet Relay Chat (IRC) clients.

A penetration test, colloquially known as a pentest or ethical hacking, is an authorized simulated cyberattack on a computer system, performed to evaluate the security of the system; this is not to be confused with a vulnerability assessment. The test is performed to identify weaknesses, including the potential for unauthorized parties to gain access to the system's features and data, as well as strengths, enabling a full risk assessment to be completed.

In computer networks, a tunneling protocol is a communication protocol which allows for the movement of data from one network to another. It involves allowing private network communications to be sent across a public network through a process called encapsulation.

<span class="mw-page-title-main">HackThisSite</span> Organization

HackThisSite.org, commonly referred to as HTS, is an online hacking and security website founded by Jeremy Hammond. The site is maintained by members of the community after his departure. It aims to provide users with a way to learn and practice basic and advanced "hacking" skills through a series of challenges in a safe and legal environment. The organization has a user base of over a million, though the number of active members is believed to be much lower. The most users online at the same time was 19,950 on February 5, 2018 at 2:46 a.m. CT.

<span class="mw-page-title-main">Secure coding</span> Software development methodology

Secure coding is the practice of developing computer software in such a way that guards against the accidental introduction of security vulnerabilities. Defects, bugs and logic flaws are consistently the primary cause of commonly exploited software vulnerabilities. Through the analysis of thousands of reported vulnerabilities, security professionals have discovered that most vulnerabilities stem from a relatively small number of common software programming errors. By identifying the insecure coding practices that lead to these errors and educating developers on secure alternatives, organizations can take proactive steps to help significantly reduce or eliminate vulnerabilities in software before deployment.

JSONP, or JSON-P, is a historical JavaScript technique for requesting data by loading a <script> element, which is an element intended to load ordinary JavaScript. It was proposed by Bob Ippolito in 2005. JSONP enables sharing of data bypassing same-origin policy, which disallows running JavaScript code to read media DOM elements or XMLHttpRequest data fetched from outside the page's originating site. The originating site is indicated by a combination of URI scheme, host name, and port number.

Security service is a service, provided by a layer of communicating open systems, which ensures adequate security of the systems or of data transfers as defined by ITU-T X.800 Recommendation.
X.800 and ISO 7498-2 are technically aligned. This model is widely recognized

Cross-site request forgery, also known as one-click attack or session riding and abbreviated as CSRF or XSRF, is a type of malicious exploit of a website or web application where unauthorized commands are submitted from a user that the web application trusts. There are many ways in which a malicious website can transmit such commands; specially-crafted image tags, hidden forms, and JavaScript fetch or XMLHttpRequests, for example, can all work without the user's interaction or even knowledge. Unlike cross-site scripting (XSS), which exploits the trust a user has for a particular site, CSRF exploits the trust that a site has in a user's browser. In a CSRF attack, an innocent end user is tricked by an attacker into submitting a web request that they did not intend. This may cause actions to be performed on the website that can include inadvertent client or server data leakage, change of session state, or manipulation of an end user's account.

<span class="mw-page-title-main">Shellshock (software bug)</span> Security bug in the Unix Bash shell discovered in 2014

Shellshock, also known as Bashdoor, is a family of security bugs in the Unix Bash shell, the first of which was disclosed on 24 September 2014. Shellshock could enable an attacker to cause Bash to execute arbitrary commands and gain unauthorized access to many Internet-facing services, such as web servers, that use Bash to process requests.

Numbered Panda is a cyber espionage group believed to be linked with the Chinese military. The group typically targets organizations in East Asia. These organizations include, but are not limited to, media outlets, high-tech companies, and governments. Numbered Panda is believed to have been operating since 2009. However, the group is also credited with a 2012 data breach at the New York Times. One of the group's typical techniques is to send PDF files loaded with malware via spear phishing campaigns. The decoy documents are typically written in traditional Chinese, which is widely used in Taiwan, and the targets are largely associated with Taiwanese interests. Numbered Panda appears to be actively seeking out cybersecurity research relating to the malware they use. After an Arbor Networks report on the group, FireEye noticed a change in the group's techniques to avoid future detection.

The Zealot Campaign is a cryptocurrency mining malware collected from a series of stolen National Security Agency (NSA) exploits, released by the Shadow Brokers group on both Windows and Linux machines to mine cryptocurrency, specifically Monero. Discovered in December 2017, these exploits appeared in the Zealot suite include EternalBlue, EternalSynergy, and Apache Struts Jakarta Multipart Parser attack exploit, or CVE-2017-5638. The other notable exploit within the Zealot vulnerabilities includes vulnerability CVE-2017-9822, known as DotNetNuke (DNN) which exploits a content management system so that the user can install a Monero miner software. An estimated USD $8,500 of Monero having been mined on a single targeted computer. The campaign was discovered and studied extensively by F5 Networks in December 2017.

References

  1. ↑ "Inter-protocol Communication" (PDF). Aug 2006. Archived from the original (PDF) on 2008-05-11. Retrieved 2013-02-22.
  2. ↑ "HTML Form Protocol Attack".
  3. ↑ "Inter-protocol Exploitation". 2007-03-05. Archived from the original on 2010-11-04. Retrieved 2010-07-08.
  4. 1 2 Biancuzzi, Federico (27 June 2007). "Worms 2.0!". www.theregister.com. Retrieved 23 August 2022.
  5. ↑ "Marco Ramilli's Blog: Hacking through images". marcoramilli.blogspot.co.uk. Retrieved 2015-05-13.
  6. ↑ Buccafurri, F.; Caminiti, G.; Lax, G. (August 2008). "Signing the document content is not enough: A new attack to digital signature". 2008 First International Conference on the Applications of Digital Information and Web Technologies (ICADIWT). pp. 520–525. doi:10.1109/ICADIWT.2008.4664402. ISBN   978-1-4244-2623-2. S2CID   14070590.
  7. ↑ "The Dalì Attack on Digital Signature" (PDF). www.softcomputing.net. Retrieved 2015-05-13.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.