Jungle style

Last updated
A Polish soldier in June 1997, with MILES gear, AKMS and three magazines taped together. Polish AKMS.JPEG
A Polish soldier in June 1997, with MILES gear, AKMS and three magazines taped together.

Firearm magazines are used "jungle style" if they are fixed together side by side, often with tape. The spare magazine may be pointing downwards in relation to the one fitted to the weapon.

Contents

This configuration is used to speed up the process of reloading, since a loaded magazine is attached to the one in use. Disadvantages include an increase in the risk of stoppages due to the exposure of the rounds and magazine lips to dirt (particularly if the second magazine is inverted), possible loss of ammunition, and that the extra length of two magazines together can raise the profile of a soldier in the prone position.

To counter these drawbacks, some manufactures, such as SIG and Heckler & Koch, [1] have designed magazines with studs and cradles which permit extra ammunition to be carried parallel mated in an upright position without the need for tape or clamps. [1]

History

The practice of "jungle style" magazines originated in World War II for the M1 carbine, [2] M3 "Grease Gun", [3] and Thompson submachine gun. [4] Audie Murphy, one of the most decorated American combat soldiers of World War II, was reported to have utilized taped M1 carbine magazines. [5]

Thompson submachine gun users frequently taped two 20-round magazines together to speed reloads and compensate for the limited capacity. This spurred official development of the 30-round Thompson magazine, which included the experiment of welding two 20-round magazines face-to-face (dropped in favor of the 30-round magazine). The United Defense M42 submachine gun was occasionally issued with two 20-round magazines welded face-to-face. [6]

Taping magazines together in order to speed up reloading became so common among troops using the M1 Carbine that the U.S. military experimented with the "Holder, Magazine T3-A1", which came to be referred to by some infantrymen as the "Jungle Clip". This metal clamp holds two M1 Carbine 30-round magazines together without the need for tape. [7]

Related Research Articles

<span class="mw-page-title-main">Carbine</span> Shortened version of a standard firearm

A carbine is a long gun that has a barrel shortened from its original length. Most modern carbines are rifles that are compact versions of a longer rifle or are rifles chambered for less powerful cartridges.

<span class="mw-page-title-main">Firearm</span> Gun for an individual

A firearm is any type of gun that uses an explosive charge and is designed to be readily carried and used by an individual. The term is legally defined further in different countries.

<span class="mw-page-title-main">Submachine gun</span> Type of automatic firearm

A submachine gun (SMG) is a magazine-fed automatic carbine designed to fire handgun cartridges. The term "submachine gun" was coined by John T. Thompson, the inventor of the Thompson submachine gun, to describe its design concept as an automatic firearm with notably less firepower than a machine gun. As a machine gun must fire rifle cartridges to be classified as such, submachine guns are not considered machine guns.

<span class="mw-page-title-main">Uzi</span> Family of Israeli submachine guns

The Uzi is a family of Israeli open-bolt, blowback-operated submachine guns and machine pistols first designed by Major Uziel "Uzi" Gal in the late 1940s, shortly after the establishment of the State of Israel. It is one of the first weapons to incorporate a telescoping bolt design, which allows the magazine to be housed in the pistol grip for a shorter weapon.

<span class="mw-page-title-main">Thompson submachine gun</span> American submachine gun

The Thompson submachine gun is a blowback-operated, selective-fire submachine gun, invented and developed by United States Army Brigadier General John T. Thompson in 1918. It was designed to break the stalemate of trench warfare of World War I, although early models did not arrive in time for actual combat.

<span class="mw-page-title-main">M1 carbine</span> Auto-loading carbine

The M1 carbine is a lightweight semi-automatic carbine that was issued to the U.S. military during World War II, the Korean War, and the Vietnam War. The M1 carbine was produced in several variants and was widely used by paramilitary and police forces around the world after World War II.

<span class="mw-page-title-main">M50 Reising</span> Submachine gun

The .45 Reising submachine gun was manufactured by Harrington & Richardson (H&R) Arms Company in Worcester, Massachusetts, USA, and was designed and patented by Eugene Reising in 1940. The three versions of the weapon were the Model 50, the folding stock Model 55, and the semiautomatic Model 60 rifle. Over 100,000 Reisings were ordered during World War II, and were initially used by the United States Navy, Marine Corps, and the United States Coast Guard, though some were shipped to Canadian, Soviet, and other allied forces to fight the Axis powers.

<span class="mw-page-title-main">Personal defense weapon</span> Self-defense firearm

Personal defense weapons (PDWs) are a class of compact, magazine-fed, submachine gun-like automatic firearms designed to fire rifle-like cartridges. Most PDWs fire a small-caliber, high-velocity centerfire bottleneck cartridge resembling a scaled-down intermediate cartridge, essentially making them an "in-between" hybrid between a submachine gun and a carbine.

The Suomi KP/-31 is a Finnish submachine gun that was mainly used during World War II. It is a descendant of the M-22 prototype and the KP/-26 production model, which was revealed to the public in 1925. It entered service in Finland in 1931, and remained in use until the 1980s.

<span class="mw-page-title-main">Magazine (firearms)</span> Ammunition feeding device of a firearm

A magazine, often simply called a mag, is an ammunition storage and feeding device for a repeating firearm, either integral within the gun or externally attached. The magazine functions by holding several cartridges within itself and sequentially pushing each one into a position where it may be readily loaded into the barrel chamber by the firearm's moving action. The detachable magazine is sometimes colloquially referred to as a "clip", although this is technically inaccurate since a clip is actually an accessory device used to help load ammunition into a magazine or cylinder.

<span class="mw-page-title-main">Open bolt</span> System in firearms

A firearm is said to fire from an open bolt or open breech if, when ready to fire, the bolt and working parts are held to the rear of the receiver, with no round in the chamber. When the trigger is actuated, the bolt travels forward, feeds a cartridge from the magazine or belt into the chamber, and fires that cartridge in the same movement. Like any other self-loading design, the action is cycled by the energy released from the propellant, which sends the bolt back to the rear, compressing the mainspring in readiness for firing the next round. In an open-bolt gun firing semi-automatically, the bolt is caught and held at this point by the sear after each shot; and in automatic open-bolt fire, it's caught and held in this manner whenever the trigger is released. In contrast to this, in closed-bolt guns, the trigger and sear do not affect the movement of the bolt directly.

<span class="mw-page-title-main">MP 18</span> Submachine gun

The MP 18 is a German submachine gun designed and manufactured by Bergmann Waffenfabrik. Introduced into service in 1918 by the German Army during World War I, the MP 18 was intended for use by the Sturmtruppen, assault groups specialized in trench combat, as a short-range offensive weapon that would provide individual soldiers with increased firepower over a pistol.

<span class="mw-page-title-main">M2 Hyde</span> Submachine Gun

The Hyde-Inland M2 was a United States submachine gun design submitted for trials at Aberdeen Proving Ground in February 1941. Work was undertaken by General Motors Inland Manufacturing Division to develop workable prototypes of George Hyde's design patented in 1935. The model first submitted for trials in April 1942 was designated the Hyde-Inland 1. Trials revealed the design was superior to the M1 submachine gun in mud and dirt tests, and its accuracy in full-automatic firing was better than any other submachine gun tested at the time. An improved Hyde-Inland 2 was designated U.S. Submachine gun, Caliber .45, M2 as a substitute standard for the M1 Thompson in April 1942. As Inland's manufacturing capacity became focused on M1 carbine production, the US Army contracted M2 production to Marlin Firearms in July 1942. Marlin began production in May 1943. Marlin's production failed to match the trials prototype performance; and Marlin's original contract for 164,450 M2s was canceled in 1943 upon adoption of the M3 submachine gun. The M2 is chambered for the .45 ACP cartridge and used the same 20- or 30-round magazine as the Thompson. Its cyclic rate of fire is 570 rounds per minute. None of the approximately 400 manufactured were issued by any branches of the United States military.

<span class="mw-page-title-main">United Defense M42</span> Submachine gun

The United Defense M42, sometimes known as the Marlin for the company that did the actual manufacturing, was an American submachine gun used during World War II. It was produced from 1942 to 1943 by United Defense Supply Corp. for possible issue as a replacement for the Thompson submachine gun and was used by agents of the Office of Strategic Services (OSS). However, its usage was limited, and the Thompson continued to see service until the end of the war, alongside the M3 submachine gun, which was designed around the same time as the M42.

<span class="mw-page-title-main">M3 submachine gun</span> American submachine gun

The M3 is an American .45-caliber submachine gun adopted by the U.S. Army on 12 December 1942, as the United States Submachine Gun, Cal. .45, M3. The M3 was chambered for the same .45 ACP round fired by the Thompson submachine gun, but was cheaper to mass produce and lighter, at the expense of accuracy. The M3 was commonly referred to as the "Grease Gun" or simply "the Greaser," owing to its visual similarity to the mechanic's tool.

<span class="mw-page-title-main">Auto-Ordnance Corporation</span> Firearms history

Auto-Ordnance was a U.S. arms development firm founded by retired Colonel John T. Thompson of the United States Army Ordnance Department in 1916. Auto-Ordnance is best known for the Thompson submachine gun, used as a military weapon by the Allied forces in World War II, and also notorious as a gangster weapon used during the Roaring Twenties.

American military technologies developed during World War II became more advanced and specialized as the war progressed. The technologies produced ranged in complexity from relatively simple items such as small arms and armored vehicles, including tanks, to more complex items such as the atomic bomb. The latter, produced under the secretive Manhattan Project, proved to be an incredibly powerful weapon that revolutionized warfare and was used to end the war. Other technologies, such as the M4 Sherman tank, the M1 Garand and M1 Carbine, and the gas mask, were refinements on previously existing technologies.

<span class="mw-page-title-main">SIG MPX</span> Submachine gun

The SIG MPX is a gas-operated submachine gun designed and manufactured by SIG Sauer, and is primarily chambered in 9×19mm Parabellum. It is a gas-operated firearm featuring a closed, rotating bolt. These design features, rare in submachine guns, were chosen to enhance the safety of the user and to have a more reliable firearm. It was designed in 2013 and was released to the general public in 2015. It features the SIG Sauer short stroke push-rod gas system to reduce the recoil and improve the reliability of the weapon.

References

  1. 1 2 Terry Gander, ed. (2006). Jane's Infantry Weapons 2006/2007. Jane's Information Group. pp. 179, 220. ISBN   0710627556.
  2. Leroy Thompson (2011). The M1 Carbine. p. 57. ISBN   978-1849086196.
  3. Michael Green (2015). United States Infantry Weapons of the Second World War: Rare Photographs from Wartime Archives. p. 68.
  4. Bill Yenne (2009). Tommy Gun: How General Thompson's Submachine Gun Wrote History . p.  212. ISBN   978-0312383268.
  5. "Audie Murphy's M1 Carbine Gift To DFC Recipient George D. Mclvor". December 19, 2012. Retrieved December 22, 2015.
  6. Eugene Liptak (2009). Office of Strategic Services 1942-45: The World War II Origins of the CIA. Osprey Publishing. ISBN   978-1846034633.
  7. "M1 Carbine" (PDF). Camden Light Artillery 1 BN. Camden Light Artillery Association and the 1st Battalion 112th Field Artillery. December 2017. p. 6. Retrieved Feb 12, 2021.