The Junkers G 24 was a German three-engine, all-metal low-wing monoplane passenger aircraft manufactured by Junkers from 1925. Junkers F 24 was the designation for single-engine versions of the same aircraft.
The increased German air traffic in the 1920s led to a requirement for a larger passenger transport aircraft. The G 24 was an enlarged development of the F 13. It was originally designed by Ernst Zindel as a single-engine aircraft. Under the restrictions imposed on aircraft in Germany by the Treaty of Versailles, only low powered engines were allowed. So the Junkers company designed their large G24 airliner to be single-engined, but built it as a tri-motor. With three low powered engines the G24 could fly, but was not a viable airliner. The plan was to sell the tri-motors to airlines outside of Germany, who would then install a single, high-powered engine (e.g. 450hp Napier Lion) on the nose, and simply remove the wing center-section plugs that carried the other two engines. However the Military Inter-Allied Commission of Control declared the G24 design to be a military type aircraft, and outlawed it.
Junkers then resubmitted what was essentially the same design, but under a new designation: Junkers G23. The Allied Commission ultimately allowed Junkers to build the G23, even in the single engined version, because it was clearly an airline type. The plane was always marketed under the G24 designation. (This paragraph based on 'Wagner' pages 230–234[1])
Junkers continued to build the G24/G23 as a tri-motor, because the ruse to circumvent the Allied restrictions also had the benefit that the plane could fly, and even climb, with one engine out. In 1925 most airliners were single-engined, since one big engine will usually be more efficient than several small ones. Twin-engine types could not maintain altitude with an engine out, unless they were so overpowered that the airlines could not afford to operate them (similarly to how twinjets were impractical on long-range routes before 1980s, and how trijets were used instead). A tri-motor did not have to be so grossly overpowered, to be able to fly with one engine out.
The G 23 cockpit
On May 1, 1926 newly formed German airline Deutsche Luft Hansa started flying passengers on the route Berlin – Königsberg at night using G24 aircraft ('Wagner' page 232[1] 'Seifert' page 376[2]). This was the first time any airline, anywhere in the world, flew passengers at night. Previously airlines had flown only mail and freight after dark. If an engine failed, the pilot bailed out by parachute, since a forced landing in the dark is too dangerous. The Junkers G24 could carry passengers, since there would not be any forced landings. The G24s of Luft Hansa also had blind flying instruments and radio navigation (with the radio operator sitting in the passenger cabin, as there was no room in the open two seat cockpit[3]).
The aircraft was manufactured in three main batches, with different engine alternatives. Between 1925 and 1929, at least 72 aircraft were manufactured, 26 of which went to Luft Hansa. The G 24 managed to set a number of aviation records involving pay loads. Fritz Horn flew 2,020km (1,256mi) with a payload of 1,000kg (2,200lb) on 14 h 23 min, having an average speed of 140km/h (90mph), setting a new world record.
On 24 July 1926, two G 24s became famous after having flown the 20,000km (12,400mi) route between Berlin and Peking in just 10 stops. This flight ended on 8 September. It was initially meant that they would fly all the way to Shanghai, but they were prevented by military conflicts. On 26 September 1926, the two aircraft landed again in Berlin. Later during the year, a trans-Euro-Asiatic line was created.
Luft Hansa, which operated the largest G 24 fleet in the world, decided to modify their G 24s to a single engine standard. The first modifications were done in March 1928. The wing was shortened and the center engine was replaced with a BMW VIU engine. Junkers called this aircraft F 24ko. A total of 11 G 24s were modified to F 24 standard between 1928 and 1930. By July 1933, most of these BMW-equipped F 24s were again modified with the new Jumo 4 and designated as F 24kay. Most of these F 24s remained in service at the beginning of World War II in 1939. Most of them were used by Luft Hansa as freighter aircraft.
The Soviet-German aircraft cooperation in the 1920s led to a Soviet request for a new bomber aircraft. Junkers then designed the Junkers Ju 25 as a twin-engine bomber. But the development of this aircraft was too expensive for Junkers, especially since there were some difficulties with his Russian partners. Junkers then advised his lead designers – Ernst Zindel and Hermann Pohlmann – to design a military derivate of the G 24. By November 1924, the new aircraft was ready, and given the designation G3S1 24 and it was a direct modification of the G 24ba. The aircraft was said to be an air ambulance. Junkers followed up this design with several reconnaissance designs e.g. the G1Sa 24 which was a modified G 24 with only a single engine. The next design, the G2sB 24 was also a bomber, directly derived from the G 24he. This aircraft had a new center wing section and a new nose section, to allow an open shooting area to the forward areas. Junkers decided to produce this design as the general military version of the G 24 and gave it the designation K 30 in 1926.
In 1926, the Finnish airline Aero O/Y acquired a Junkers G 24, which went into service on the Stockholm route. The aircraft was equipped with floats, but not skis, and so could be used in summer only. It remained in service until 1935.
A Swedish G 24 also participated in the rescue of the unfortunate Italian Umberto Nobile expedition to the North pole. This was the first time an aircraft had flown over the Arctic Sea without stops.
Military versions
Junkers R 42 photo from L'Aéronautique October,1926
Junkers offered the K 30 design to the Soviet forces, which ordered a total of 23 K 30s in 1925 and 1926. A production line for the military version K 30 was set up at A.B. Flygindustri at Limhamn in Sweden as the German aviation industry was prevented from building military aircraft in 1926. The parts for the K 30 aircraft were built at Dessau and then shipped to Limhamn, where A.B. Flygindustri built the K 30 under the designation R 42. Some of the R 42s were equipped with machine gun positions and bomb mountings. But several of the R 42s were also shipped without military equipment to Russia. These were later fitted with military equipment at Junkers' factory in Fili, Moscow. The R 42/K 30 was designated JuG-1 in the Soviet Union. They received five 7.62mm (.30in) machine guns and could carry a bomb load of 500kg (1,100lb). This version was used to rescue the expedition of downed balloonist General Umberto Nobile in 1928.
Six more R 42s were delivered to Chile during 1926 plus three K 30s to Spain and two K 30s to Yugoslavia until 1931. The Spanish and Yugoslavian aircraft were produced at Dessau. The K 30 was equipped with either wheels, skis or floats. With the successful conversion of the G 24 into the single-engine aircraft F 24, Junkers was also thinking about a single-engine K 30 in 1931. Like the F 24, this K30do was to be equipped with the Jumo 4 engine and was similar to the initial G1Sa 24. However, no single-engine K 30s were built.
July 24 – The Peking expedition flight: A Luft Hansa expedition flew to Peking, a flight of over 20,000km (12,400mi). Two G 24s, the D-901 and D-903 participated
1927
April 1 – World distance record with 2,000kg (4,410lb) payload. Waldemar Roeder achieved a new world distance record with a G 24L with 2,000kg (4,410lb) payload with 1,013.18km (629.56mi) in 7 hours and 52 minutes.
April 4 – World distance record with 1,000kg (2,200lb) payload. Fritz Horn achieved a new distance record with a G 24L with 1,000kg (2,200lb) payload with 2,026.36km (1,259.12mi) in 14 hours and 23 minutes.
April 10 – World speed record with 2,000kg (4,410lb) payload over 500km (mi). Hermann Roeder achieved a new speed record with a G 24L with 2,000kg (4,410lb) payload over 500km (310mi) with 175.75km/h (109.21mph). During the same flight, the record for 2,000kg (4,410lb) over 100km (60mi) was also achieved with 179.24km/h (111.37mph)
June 1 – World speed record with 2,000kg (4,410lb) payload over 100km (60mi). The Junkers pilot Zimmermann achieved a new speed record with a G 24L with 2,000kg (4,410lb) payload over 100km (60mi) with 207.26km/h (128.79mph). The record flight was performed between the turning points at Dessau and Leipzig.
June 28 – World speed record. Zimmermann achieved the speed record with 1,000kg (2,200lb) payload with 209.115km/h (129.938mph)
August 4 – The South Atlantic expedition flight. A G 24h1e belonging to Severa took off from Norderney to the Azores from where it was planned to cross the North Atlantic as the first aircraft from East to West. But the operation had to be stopped due to a crash at the Azores.
August 6 – a K 30 seaplane performed FAI World Record Flights. Over a distance of 1,000km (620mi) and with a payload of 1,000kg (2,200lb), the K 30 reached a speed of 171km/h (106mph). The flight time of 10 h 42 min 45 sec was also a FAI Record, as well as the flight distance of 1,176km (731mi).
1928
June 23 – The Afghanistan expedition flight. One G 24 and two F 13 aircraft started an Afghanistan expedition flight
Accidents and incidents
On 6 November 1929, a Deutsche Luft Hansa Junkers G 24bi Oberschlesien (registration D-903) crashed after striking trees on a hill in Marden Park, Surrey, England, while attempting to return to Croydon Airport, London, in thick fog after taking off from Croydon for a flight to Amsterdam in the Netherlands. All four crew members and three of the four passengers died.[4][5]
On 7 February 1930, Chilean Air Force Junkers R-42 J6 ditched off Punta Arenas due to engine failure, killing three of six on board.[6]
On 7 November 1930, a Syndicato Condor Junkers G 24 (P-BAHA, named Potyguar) sank off Iguape, São Paulo, killing one of eight on board.[7]
On 31 August 1932, an AB Aerotransport Junkers G 24 (SE-AAE, named Svealand) crashed at Tubbingen, Netherlands while the crew was attempting a forced landing after the number three engine failed, killing both pilots.[8]
On 1 October 1938, a Syndicato Condor G.24ce (PP-CAB, Ypiranga) made an emergency landing at the port of Coruripe, with no fatalities. The aircraft was later scrapped.[9]
On 24 August 1939, a Deutsche Luft Hansa Junkers F.24 (D-ULIS, named Düsseldorf) force-landed at Glindow, Germany following an engine fire, killing both pilots. The aircraft was manufactured in 1925 as a three-engined G 24 and was converted to an F 24kay in December 1931 as a test bed for the Junkers Jumo 4 engine. In 1936 the aircraft was re-engined with a Daimler-Benz DB 600 V12 for test flights, and a DB 601 V12 in 1938 for 200 hours of test flying, and it was during one of these test flights that the engine caught fire, leading to the crash.[10]
Variants
Data from:Hugo Junkers Pionier der Luftfahrt – Seine Flugzeuge,[1] Junkers Aircraft & Engines 1913–1945[11]
G 24 Prototype
Powered by one 130kW (180hp)BMW IIIa and two 75kW (100hp)Mercedes D.I engines in 1924.
G 24
Improved version with one 145kW (195hp)Junkers L2 (195hp) and two 120kW (160hp)Mercedes D.IIIa engines in 1925
G 24a
Powered by three 145kW (195hp)Junkers L2 engines, attachment on wings, smaller engine cowlings, sometimes also a 230kW (310hp)Junkers L5 as a central engine. Two aircraft destined for Italy were fitted with 221kW (296hp)Isotta Fraschini central engines.
G 24ba
with three Junkers L2, strengthened attachments and engine mountings
Junkers F 24kay photo from L'Aérophile December,1929Test bench for Jumo 4 in October 1933 (c/n 839), plus surviving Deutsche Luft Hansa F 24ko aircraft re-engined with Jumo 4 engines.
The Heinkel He 111 is a German airliner and bomber designed by Siegfried and Walter Günter at Heinkel Flugzeugwerke in 1934. Through development, it was described as a "wolf in sheep's clothing". Due to restrictions placed on Germany after the First World War prohibiting bombers, it was presented solely as a civil airliner, although from conception the design was intended to provide the nascent Luftwaffe with a heavy bomber.
Junkers Flugzeug- und Motorenwerke AG more commonly Junkers, was a major German aircraft and aircraft engine manufacturer. It was founded in Dessau, Germany, in 1895 by Hugo Junkers, initially manufacturing boilers and radiators. During World War I and following the war, the company became famous for its pioneering all-metal aircraft. During World War II the company produced the German air force's planes, as well as piston and jet aircraft engines, albeit in the absence of its founder who had been removed by the Nazis in 1934.
The Junkers G.38 was a large German four-engined transport aircraft which first flew in 1929. Two examples were constructed in Germany. Both aircraft flew as a commercial transport within Europe in the years leading up to World War II.
The Junkers F 13 is the world's first all-metal transport aircraft, developed in Germany at the end of World War I. It was a cantilever-wing monoplane, with enclosed accommodation for four passengers and a two seat open cockpit. 322 examples were manufactured, an exceptionally large number for a commercial airliner of the era, and were operated all over the world. It accounted for over a third of air traffic in the early 1920s. It remained in production for thirteen years and in commercial service for more than thirty. There were many versions including floatplanes for water landing, skis, mailplane, and different engines. Several survive in various states of repair in museums, and a replica of the type was put back in production in the 2010s, taking flight once again nearly a century after the type first flew.
The Junkers Ju 90 was a 40-seat, four-engine airliner developed for and used by Deutsche Luft Hansa shortly before World War II. It was based on the rejected Ju 89 bomber. During the war, the Luftwaffe pressed them into service as military transports.
The Dornier Do 18 was a development of the Do 16 flying boat. It was developed for the Luftwaffe, but Deutsche Luft Hansa received five aircraft and used these for tests between the Azores and the North American continent in 1936 and on their mail route over the South Atlantic from 1937 to 1939.
The Junkers Ju 86 was a German monoplane bomber and civilian airliner designed in the early 1930s, and employed by various air forces on both sides during World War II. The civilian model Ju 86B could carry ten passengers. Two were delivered to Swissair and five to Deutsche Luft Hansa. In addition a single civilian Ju 86Z was delivered to Sweden's AB Aerotransport.
The Blohm & Voss BV 222 Wiking was a large six-engined German flying boat designed and built by the German aircraft manufacturer Blohm & Voss. It was the largest flying boat to attain operational status during the Second World War.
The Jumo 204 was an opposed-piston, inline, liquid-cooled 6-cylinder aircraft Diesel engine produced by the German manufacturer Junkers. It entered service in 1932. Later engines in the series, the Jumo 205, Jumo 206, Jumo 207 and Jumo 208, differed in stroke, bore, and supercharging arrangements.
The Focke-Wulf Fw 191 was a prototype German bomber of World War II, as the Focke-Wulf firm's entry for the Bomber B advanced medium bomber design competition. Two versions were intended to be produced, a twin-engine version using the Junkers Jumo 222 engine and a four-engine variant which was to have used the smaller Daimler-Benz DB 605 engine. The project was eventually abandoned due to technical difficulties with the engines.
The Jumo 210 was Junkers Motoren's first production inverted V12 gasoline aircraft engine, first produced in the early 1930s. Depending on the version it produced between 610 and 730 PS and can be considered a counterpart of the Rolls-Royce Kestrel in many ways. Although originally intended to be used in almost all pre-war designs, rapid progress in aircraft design quickly relegated it to the small end of the power scale by the late 1930s. Almost all aircraft designs switched to the much larger Daimler-Benz DB 600, so the 210 was produced only for a short time before Junkers responded with a larger engine of their own, the Junkers Jumo 211.
The Junkers Ju 252 was a German cargo aircraft that made its first flight in late October 1941. The aircraft was planned as a replacement for the Junkers Ju 52/3m in commercial airline service, but only a small number were built as cargo aircraft for the Luftwaffe.
The Albatros L 73 was a German twin-engined biplane airliner of the 1920s. Of conventional configuration, it featured a streamlined, boat-like fuselage and engine nacelles. All four manufactured aircraft of that type were operated by Deutsche Luft Hansa, one of which crashed near Babekuhl on 28 May 1928.
The Junkers W 33 was a German 1920s single-engine low-wing monoplane transport aircraft that followed Junkers standard practice making extensive use of corrugated aluminium alloy over an aluminium alloy tube frame, that was developed from the similar but slightly smaller Junkers F 13, and evolved into the similar W 34. One example, named Bremen, was the first aircraft to complete the much more difficult east–west non-stop heavier-than-air crossing of the Atlantic.
The BFW M.20 was a German single-engine, high-wing monoplane ten-seat passenger transport aircraft, developed in the late 1920s and early 1930s. Deutsche Luft Hansa used it throughout the 1930s on a variety of routes.
The Junkers Ju 46 was a German shipborne catapult-launched seaplane derivative of the W 34, constructed for pre-war Luft Hansa's mail service over the Atlantic Ocean. The first production models were delivered in 1932 and replaced the Heinkel He 58, which, along with the He 12, had pioneered these ship-to-shore mail delivery flights.
The Focke-Wulf A 17 Möwe was an airliner built in Germany in the late 1920s. It was a conventional high-wing cantilever monoplane with fixed tailwheel undercarriage. The aircraft provided fully enclosed seating for up to eight passengers and had a separate, fully enclosed flight deck for the two pilots. Most examples flew with Deutsche Luft Hansa, serving until around 1936. In the early 1930s, two A 17s were used for testing the Junkers Jumo 5 diesel engine.
The Focke-Wulf A 32 Bussard was a small airliner produced in Germany in the early 1930s. It was developed rapidly at the request of NOBA when Messerschmitt was unable to deliver aircraft on schedule. Based closely on the A 20, the A 32 had a revised fuselage with greater seating capacity, and an engine of over twice the power. The two examples operated by NOBA became part of Deutsche Luft Hansa's fleet in 1934.
The Junkers G 31 was an advanced tri-motor airliner produced in small numbers in Germany in the 1920s. Like other Junkers types, it was an all-metal, low-wing cantilever monoplane. In the mid-1920s, the all-metal construction and an aerodynamically 'clean' configuration were remarkable.
The Rohrbach Ro VIII Roland was an airliner produced in Germany during the 1920s. It was a conventional strut-braced, high-wing monoplane, based loosely on the Zeppelin-Staaken E-4/20 that Adolf Rohrbach designed in 1920. It had a fully enclosed flight deck and passenger cabin, and featured fixed, tailskid undercarriage. Power was supplied by three engines, one in the nose, and two mounted in nacelles on the wings. Construction was of metal throughout.
References
1 2 3 4 5 Wagner, Wolfgang (1996). Hugo Junkers Pionier der Luftfahrt – Seine Flugzeuge (in German). Bonn: Bernard & Graefe Verlag. ISBN3-7637-6112-8.
↑ Karl-Dieter Seifert "Der deutsche Luftverkehr 1926 – 1945 – auf dem Weg zum Weltverkehr" Bernhard und Graefe Verlag, Bonn 1999 ISBN3-7637-6118-7 (in German)
↑ Guenther Stauch (editor), "Das Große Buch der Lufthansa", Geramond Verlag, Munich 2003 ISBN3-7654-7248-4 (in German)
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
