K-1 (airship)

Last updated
K-1
RoleBlimp (non-rigid airship)
National originUnited States
Manufacturer Goodyear Tire and Rubber Company
Primary user United States Navy
Number built1

The K-1 was an experimental blimp designed by the United States Navy in 1929. The K-1 was not the prototype of the later K-class blimps.

Contents

Procurement

Due to the inability to get Congressional approval for the construction of an airship the navy used the ploy of ordering a "universal" control car (type J/K) which could be used on the J-class blimps from the Naval Aircraft Factory. An order was placed with Goodyear Tire and Rubber Company for an envelope to hold "experimental gases". [1] To complete the deception, there is no record of the US Navy assigning a serial number to the K-1, and standard Army TC-class blimp tail fins were procured from Goodyear.

Design

Unlike past Navy blimps, the control car was not suspended from external cables, but was hung from cables attached to the top of the envelope, and the car was carried flush against the envelope as in modern blimps. The control car carried bunks and a galley so that a relief crew could be carried, and was completely enclosed. The K-1 was also the first Navy blimp to have a taxi wheel. Like the Graf Zeppelin, the fuel for the K-1 was "blau gas" a mixture of combustible gases with the same density as air, which meant that the valving of gas as the fuel was consumed was not necessary. The only serious drawback was the tendency of the fuel to leak into the helium which then could not be run through the Lakehurst purification plant, which meant the expensive helium had to be vented to atmosphere when too contaminated or an overhaul was necessary.

Operations

K-1 was assembled at Lakehurst, New Jersey in late 1931. After tests it was based at Cape May. In November 1931 K-1 was being moved into the hangar when a gust of wind blew it into a barbed wire fence. The rip cord was pulled and K-1 deflated. [2] The K-1 was shipped to Goodyear at Akron for repair. While under repair the K-1 was fitted with more powerful Wright R-975-20 engines. [3] In mid-1933 the K-1 was sent to Lakehurst and after the departure of J-4 to Sunnyvale, was with the ZMC-2, the only flying airships at Lakehurst until 1937. The K-1 last flew in September 1940, and was subsequently used for mooring and snow removal experiments until it was scrapped in October 1941. The K-1 was not a popular airship, tending to fly tail low, and was, despite its amenities, thought to be 'uncomfortable."

Specifications (K-1)

General characteristics

Performance

See also

Related Research Articles

<span class="mw-page-title-main">Airship</span> Powered lighter-than-air aircraft

An airship or dirigible balloon is a type of aerostat or lighter-than-air aircraft that can navigate through the air under its own power. Aerostats gain their lift from a lifting gas that is less dense than the surrounding air.

<span class="mw-page-title-main">Detroit ZMC-2</span> Metal skinned airship

The ZMC-2 was the only successfully operated metal-skinned airship ever built. Constructed at Naval Air Station Grosse Ile by The Aircraft Development Corporation of Detroit, the ZMC-2 was operated by the U.S. Navy at Lakehurst, New Jersey from 1929 until its scrapping in 1941. While at Lakehurst it completed 752 flights, and logged 2265 hours of flight time.

<span class="mw-page-title-main">Zeppelin NT</span> Class of airship

The Zeppelin NT is a class of helium-filled airships being manufactured since the 1990s by the German company Zeppelin Luftschifftechnik GmbH (ZLT) in Friedrichshafen. The initial model is the N07. The company considers itself the successor of the companies founded by Ferdinand von Zeppelin which constructed and operated the very successful Zeppelin airships in the first third of the 20th century. There are, however, a number of notable differences between the Zeppelin NT and original Zeppelins as well as between the Zeppelin NT and usual non-rigid airships known as blimps. The Zeppelin NT is classified as a semi-rigid airship.

<span class="mw-page-title-main">K-class blimp</span> Class of non-rigid airships built by the Goodyear Aircraft Company for the U.S. Navy (1938-59)

The K-class blimp was a class of blimps built by the Goodyear Aircraft Company of Akron, Ohio for the United States Navy. These blimps were powered by two Pratt & Whitney Wasp nine-cylinder radial air-cooled engines, each mounted on twin-strut outriggers, one per side of the control car that hung under the envelope. Before and during World War II, 134 K-class blimps were built and configured for patrol and anti-submarine warfare operations, and were extensively used in the Navy’s anti-submarine efforts in the Atlantic and Pacific Ocean areas.

<span class="mw-page-title-main">G-class blimp</span> American non-rigid airship

The G-Class Blimps were a series of non-rigid airships (blimps) used by the United States Navy. In 1935, instead of developing a new design airship, the Navy purchased the Goodyear Blimp Defender for use as a trainer and utility airship assigning it the designator G-1. Defender was built by the Goodyear Aircraft Company of Akron, Ohio and was the largest blimp in the company’s fleet of airships that were used for advertising and as passenger airships. Goodyear built additional G-class airships for the Navy during World War II to support training needs.

<span class="mw-page-title-main">L-class blimp</span> Class of non-rigid airships built by Goodyear Aircraft Company for the U.S. Navy (1930s)

The L-class blimps were training airships operated by the United States Navy during World War II. In the mid-1930s, the Goodyear Aircraft Company built a family of small non-rigid airships that the company used for advertising the Goodyear name. In 1937 the United States Navy awarded a contract for two different airships, K-class blimp designated K-2 and a smaller blimp based upon Goodyear's smaller commercial model airship used for advertising and passenger carrying. The smaller blimp was designated by the Navy as L-1. It was delivered in April 1938 and operated from the Navy's lighter-than-air facility at Lakehurst, New Jersey. In the meantime, the Navy ordered two more L-Class blimps, the L-2 and L-3, on September 25, 1940. These were delivered in 1941. L-2 was lost in a nighttime mid-air collision with the G-1 on June 8, 1942.

<span class="mw-page-title-main">J-class blimp</span> Type of aircraft

The J-class blimps were non-rigid airships designed by the Navy Bureau of Aeronautics and Goodyear Tire & Rubber Company in the early 1920s for the US Navy.

<span class="mw-page-title-main">M-class blimp</span> Type of aircraft

The Goodyear Aircraft Company of Akron, Ohio built the M-class blimp for the US Navy as the follow-on to the K-class anti-submarine warfare blimp used during World War II. It was a significantly larger airship, 50% larger than its predecessor. Four airships, designated M-1 through M-4, were delivered in early 1944. Operations of K-ships in tropical regions had shown a need for a blimp with greater volume to offset the loss of lift due to high ambient temperatures.

<span class="mw-page-title-main">N-class blimp</span> American patrol airship

The N-Class, or as popularly known, the "Nan ship", was a line of non-rigid airships built by the Goodyear Aircraft Company of Akron, Ohio for the US Navy. This line of airships was developed through many versions and assigned various designators as the airship designation system changed in the post World War II era. These versions included airships configured for both anti-submarine warfare and airborne early warning (AEW) missions.

<span class="mw-page-title-main">Airship Industries Skyship 600</span> British non-rigid airship

The Airship Industries Skyship 600 is a modern airship, originally designed by British company Airship Industries, further developed by a subsidiary of Westinghouse Electric Corporation the type certificate holder is now Skyship Services of Orlando, Florida in the United States.

<span class="mw-page-title-main">SSZ class airship</span> Type of aircraft

The SSZ non-rigid airships or "blimps" were developed in United Kingdom during World War I from the earlier SS class. The main role of these craft was to escort convoys and scout or search for German U-boats. A secondary purpose was to detect and destroy mines.

<span class="mw-page-title-main">C-class blimp</span> Type of aircraft

The C-class blimp was a patrol airship developed by the US Navy shortly after World War I, a systematic improvement upon the B-type which was very suitable for training, but of limited value for patrol work. Larger than the B-class, these blimps had two motors and a longer endurance. Once again, the envelope production was split between Goodyear and Goodrich, with control cars being built by the Burgess division of Curtiss Aeroplane and Motor Company. Originally the Navy ordered 30 but reduced the number to 10 after the armistice in November 1918. All ten of the "C" type airships were delivered in late 1918, and examples served at all of the Navy's airship stations from 1918 to 1922. In 1921, the C-7 was the first airship ever to be inflated with helium. The Navy decommissioned its last two remaining C-type blimps, the C-7 and C-9 in 1922.

<span class="mw-page-title-main">D-class blimp</span> Type of aircraft

The D class blimp was a patrol airship used by the US Navy in the early 1920s. The D-type blimps were slightly larger than the C-type and had many detail improvements. The Navy continued the practice of dividing the envelope production between Goodyear and Goodrich. The control cars were manufactured by the Naval Aircraft Factory. The major improvements over the C-type blimps were a better control car design and easier, more reliable controls and instrumentation. The engines were moved to the rear to reduce noise and allow better communications between crew members. The fuel tanks were suspended from the sides of the envelope. The envelope was identical to the C-type, except an additional six-foot panel was inserted for a total length of 198 feet (60 m) and a volume of 190,000 cubic feet (5,400 m3). The last of the D-Class, D-6, had a different control car designed by Leroy Grumman who later founded the Grumman Aircraft Engineering Corporation.

<span class="mw-page-title-main">E-class blimp</span> Type of aircraft

The E class of US Navy blimps comprised a single airship, built during World War I by Goodyear as one of a group of three small blimps offered to the US government. Two were purchased for the US Navy and one for the US Army. The Navy blimps were designated E-1, F-1, and the Army airship A-1. These airships had identical envelopes but different cars. The E-1 was delivered to Pensacola, Florida in December 1918. It was flown only at Pensacola serving as a trainer at the Airship School. A new envelope was provided in December 1920. E-1 was retired from service sometime in 1924.

<span class="mw-page-title-main">F-class blimp</span> Type of aircraft

The F class of US Navy blimps comprised a single airship, built during World War I by Goodyear as one of a group of three small blimps offered to the US government. Two were purchased for the US Navy and one for the US Army. The Navy blimps were designated E-1, F-1, and the Army airship A-1. Classified as an "Experimental Engine Testing Dirigible." F-1 had the same envelope size as the E-1, due to the use of a tractor mounted 125 hp Union engine, the performance was different. F-1 spent its entire career at Hampton Roads. It was flown in both tractor and pusher configurations. It also may have been flown with a Curtiss OXX engine. F-1 was removed from inventory in November 1923.

<span class="mw-page-title-main">H-class blimp</span> 1921 blimp of the United States Navy

The H class blimp was an observation airship built for the U.S. Navy in the early 1920s. The original "H" Class design of 1919 was for a twin engined airship of approximately 80,000 cubic feet volume. Commander Lewis Maxfield suggested that a small airship which could be used either as a tethered kite balloon, or be towed by a ship until releasing its cable, would be able to scout on its own. The concept was an airship similar to the later Army Motorized Kite Balloons.

<span class="mw-page-title-main">American Blimp A-170</span> Type of aircraft

The American Blimp A-170 is a blimp series built by the American Blimp Corporation now owned and operated by the Airsign Airship Group.

The Goodyear Type AD was a small airship built in the United States in the mid-1920s. The first example, christened Pilgrim, was Goodyear's first civil airship, and their first airship to use helium as its lift gas. Originally intended for pleasure cruising, it soon found its true calling as a promotional vehicle as the first "Goodyear Blimp" in a line that has continued for over ninety years. The Type AD was a conventional blimp design with a gondola that could carry two passengers in addition to the flight crew. While usually described as a non-rigid type, the design in fact incorporated a triangular-section magnesium girder as a keel, fastened inside the envelope. The craft carried its own collapsible mooring mast which allowed it to "land" anywhere that 250 ft × 250 ft of clear ground was available.

<span class="mw-page-title-main">Airship Industries Skyship 500</span> British non-rigid airship

The Skyship 500 is a non-rigid airship designed and built in the United Kingdom during the 1980s.

The Mantainer Ardath is a non-rigid airship designed and built in Australia during the 1970s.

References

  1. "Will try gases for fuel in airships". Popular Science. Vol. 118, no. 1. Bonnier Corporation. January 1931. p. 52.
  2. "Navy's Largest Blimp Damaged in Landing". The New York Times. 4 November 1931. p. 28. Retrieved 2018-12-11.
  3. Shock, James R. (2001). US Navy Airships, 1915-1962 : a history by individual airship. Edgewater Florida: Atlantis Productions. p. 77. ISBN   0-9639743-8-6.