Kimber Custom

Last updated
Kimber Custom
Kimberstainlesscustomii.jpg
Kimber Custom Stainless II
Type Semi-automatic pistol
Place of originUnited States
Service history
In service1997 – present
Used by LAPD SWAT
OCSD SWAT
USMC Force Recon
Production history
Manufacturer Kimber
VariantsCustom
Custom II
Specifications
Mass38 ounces
Length8.7 inches
Barrel  length5 inches
Width1.3 inches
Height5.3 inches

Caliber .45 ACP
9×19mm
Action semi-automatic, single action
Feed system7-, 8- or 10-round magazine

The Kimber Custom is an M1911 style semi-automatic pistol. It is designed, manufactured, and distributed by Kimber Manufacturing, Inc. in Yonkers, New York.

Contents

Overview

The Custom is made in a variety of styles with different features and finishes. As an M1911 style pistol, it is usually chambered in .45 ACP. It also has been produced in other calibers, including .40 S&W, 10mm Auto, 9mm Luger, and .38 Super. The individual gun's caliber is stamped on top of the barrel and is visible with the slide in battery (fully forward).

The Custom is a full-sized model 1911, with a five-inch barrel. The frame and slide are made of steel. The Custom utilizes a single full-length guide rod, necessitating the serrations on the front of the slide for press checks. Although the Custom is considered Kimber's base model, it has a number of features that were formerly found only on customized model 1911s, such as a lowered ejection port, custom trigger, beveled magazine well, extended thumb safety, and beavertail grip safety. [1]

The original Custom model has been superseded by the Custom II. The Custom II has an internal firing pin safety. This feature is designed to provide additional assurance that the gun will not fire if dropped, as the firing pin is blocked from striking the chambered cartridge unless the grip safety is depressed.

Custom TLE II

The Kimber Custom TLE II is a model of Kimber Custom. The designation "TLE" stands for "Tactical Law Enforcement". The TLE is identical, except for the markings, to a special model that was designed for use by the LAPD SWAT team. [2] Unlike the standard Custom, it comes with tritium bar-dot night sights and 30 lines per inch frontstrap checkering. [3]

The TLE has been manufactured in the following variations:

ICQB, Warrior, and Desert Warrior

The Kimber Warrior and Desert Warrior are models that are based on a special version of the Custom that was built for the United States Marine Corps Forces Special Operations Command. [4] The MARSOC pistol, known as the Kimber ICQB (Interim Close Quarter Battle) pistol, does not have an internal firing pin block as seen on the rest of the current Kimber Custom models, hence a "II" does not follow the Warrior or Desert Warrior's names. These pistols have an ambidextrous thumb safety, a lanyard loop, an internal extractor, and, in contrast to other Custom models, a standard length recoil spring guide rod to allow easier field stripping without tools. [5] [6]

The ICQB pistol is fitted with a screw-on Dawson Precision light rail, Novak LoMount tritium night sights, and brown Simonich Gunner grips. The guns were delivered to MARSOC equipped with SureFire integrated military pistol lights, Gemtech TRL tactical retention lanyards, and Wilson Combat 7- or 8-round magazines.

The Warrior and Desert Warrior have a frame-integrated M1913 light rail, Kimber Meprolight tritium night sights, and Kimber's own special grips that are very similar to the Gunner grips in coyote brown. They are delivered with Kimber factory magazines. They are otherwise the same as the ICQB pistols.

The Warrior has a matte black KimPro finish and a standard Custom trigger. The Desert Warrior comes in a green-tan KimPro finish that would blend in with desert camouflage, and has a solid trigger. [7]

Other Custom models

Other models of Kimber Custom include the following:

Kimber has also produced several higher-end full-sized model 1911 pistols that are closely based on the Custom, but are not considered part of the Custom line due to their additional features and higher price. These include the following:

See also

Related Research Articles

The Beretta 92G-SD and 96G-SD Special Duty handguns are semi-automatic, locked-breech delayed recoil-operated, double/single-action pistols, fitted with the heavy, wide Brigadier slide, chambered for the 9×19mm Parabellum cartridge (92G-SD) and the .40 S&W cartridge (96G-SD), framed with the addition of the tactical equipment rail, designed and manufactured by Beretta.

<span class="mw-page-title-main">Beretta 21A Bobcat</span> Semi-automatic pistol

The Beretta 21A Bobcat is a semi-automatic pocket pistol designed by Beretta in Italy. Production began in the late 1984, solely in the Beretta U.S.A. facility in Accokeek, Maryland. It is a further development of the Beretta Model 20, whose production ended in 1985.

<span class="mw-page-title-main">CZ 75</span> Auto-loading pistol

The CZ 75 is a semi-automatic pistol made by Czech firearm manufacturer ČZUB. First introduced in 1975, it is one of the original "wonder nines" and features a staggered-column magazine, all-steel construction, and a hammer forged barrel. It is widely distributed throughout the world and is the most common handgun in the Czech Republic.

<span class="mw-page-title-main">Smith & Wesson Model 22A</span> Semi-automatic pistol

The Smith & Wesson Model 22A is a semi-automatic pistol that was manufactured in Houlton, Maine. The 22A is a full-size pistol with an aluminum alloy frame. The steel barrel has an integrated Weaver style rail.

<span class="mw-page-title-main">Ruger P series</span> Semi-automatic pistol

The Ruger P series is a line of centerfire semi-automatic pistols made by Sturm, Ruger & Company produced from 1985 to 2013. The P-series pistols were designed for military, police, civilian and recreational use. The designs are largely based on the Browning action found in the M1911 pistol, but with minor variations, generally related to the safety mechanism and the barrel-camblock interface. Reviews have considered them rugged, reliable, and strong, though this strength comes at the price of bulk and a blocky appearance.

Western Arms is an airsoft gun manufacturer. They primarily manufacture 1911 and 2011 variants, though they do make several Beretta 92 types and have made other types of pistols. Recently, they have added three types of GBB M4 carbine rifles to their lineup of gas powered replicas. Currently, they only produce gas powered blowback replicas, though they have made gas-electric hybrids in the past.

<span class="mw-page-title-main">Smith & Wesson Model 910</span> Semi-automatic pistol

The Smith & Wesson Models 908, 908s, 909, 910, and 915 are 9×19mm Parabellum, short-recoil-operated double-action/single action (DA/SA) semi-automatic pistols Value Series pistols. All of these pistols utilize a stainless barrel, an aluminum alloy frame, and either a carbon steel or stainless steel slide. The S&W Model 915 was produced from 1992 to 1994, while the S&W Model 910 was introduced in 1995 as a replacement for the Model 915 and was manufactured through 2006.

<span class="mw-page-title-main">Beretta 8000</span> Type of semi-automatic pistol

The Beretta 8000 (Cougar) series pistols are manufactured by Beretta of Italy.

The Kimber Eclipse is a model 1911 semi-automatic pistol chambered for the .45 ACP and 10mm Auto cartridges. It is made by Kimber Manufacturing in Yonkers, New York. There are several models of Kimber Eclipse, of different sizes and with different combinations of features.

<span class="mw-page-title-main">Taurus PT92</span> Semi-automatic pistol

The Taurus PT92 is a double action/single action, double-stack-magazine fed, short recoil-operated, semi-automatic 9mm pistol manufactured by Taurus in the Beretta factory in São Paulo, Brazil.

<span class="mw-page-title-main">MEU(SOC) pistol</span> Semi-automatic pistol

The MEU(SOC) pistol, officially designated the M45 MEUSOC, is a magazine-fed, recoil-operated, single-action, semiautomatic pistol chambered for the .45 ACP cartridge. A variant of the M1911, it has been the standard-issue side arm for the Force Recon Element of the United States Marine Corps' Marine Expeditionary Units since 1985. It is assigned NATO Stock Number 1005-01-370-7353.

<span class="mw-page-title-main">Kimber Aegis</span> Semi-automatic pistol

The Kimber Aegis is a series of M1911 pistols chambered in 9mm Luger as well as .45 ACP and is manufactured by Kimber Manufacturing. It includes the subcompact Ultra Aegis II, the compact Pro Aegis II, and the full-sized Custom Aegis II.

The Taurus PT1911 is a replication of the US military model 1911 single-action recoil operated semi-automatic pistol. It was designed and manufactured by Taurus in Porto Alegre Brazil, and distributed in the US by Taurus USA. Announced at the 2005 SHOT Show, it was released to the consumer market in the fall of 2005.

<span class="mw-page-title-main">Kahr K series</span> Semi-automatic pistol

The Kahr K series is a series of semi-automatic pistols manufactured by Kahr Arms. The original weapon in the series, the K9, was introduced in 1995 and features a double action only (DAO) trigger mechanism with a Locked breech recoil operated action. It was intended to address the police backup / off duty and civilian concealed carry markets.

<span class="mw-page-title-main">Ruger Standard</span> Semi-automatic pistol

The Ruger Standard Model is a rimfire semi-automatic pistol introduced in 1949 as the first product manufactured by Sturm, Ruger & Co., and was the founding member of a product line of .22 Long Rifle cartridge handguns, including its later iterations: the MK II, MK III, and MK IV. It is marketed as an inexpensive .22 caliber rimfire intended for casual sport and target shooting, and plinking. Designed by company founder William B. Ruger, the Standard model and its offspring went on to become the most accepted and successful .22 caliber semi-automatic pistols ever produced.

The Smith & Wesson 645 and Smith & Wesson 745 are second-generation semi-automatic pistols which predate Smith & Wesson's 4500 series of handguns. The S&W 645/745 is chambered for the .45 ACP cartridge. The S&W 645 is constructed almost entirely from stainless steel and is thus extremely resistant to harsh weather conditions, whereas the S&W 745 has a stainless steel frame and a blued carbon steel slide. The S&W 645 was introduced in 1985 and discontinued in 1988. The S&W 745 was produced from 1986 to 1990, primarily as a single-action competition gun for IPSC shooting.

<span class="mw-page-title-main">SIG Sauer P238</span> Pistol

The SIG Sauer P238 is a compact .380 ACP caliber, single-action pistol announced by SIG Sauer at the 2009 SHOT Show. It is modelled after the M1911, similar to the Colt Mustang. Grip panels are fluted polymer making this an all-metal frame firearm in competition with plastic-framed pistols in the same class as the Ruger LCP and the Kel-Tec P-3AT.

<span class="mw-page-title-main">FN FNX</span> Semi-automatic pistol

The FN FNX pistol is a series of semi-automatic, polymer-framed pistols manufactured in Columbia, South Carolina, by FN America, a division of Fabrique Nationale d'Herstal. The pistol is chambered for the 9×19mm Parabellum, .40 S&W, and .45 ACP cartridges. It was introduced in 2009 as the successor to the FN FNP.

<span class="mw-page-title-main">Kahr P series</span> Semi-automatic pistol

The Kahr P series is a product line of double action only (DAO) hammerless, striker-fired, short recoil operated, semi-automatic pistols manufactured by Kahr Arms. The target market for the P line is the civilian concealed carry firearms market, as well as being intended as backup weapons for law enforcement officers.

<span class="mw-page-title-main">Remington 1911 R1</span> Semi-automatic pistol

The Remington 1911 R1 is a semi-automatic pistol modeled after the classic Colt 1911 which has served the US armed forces for over 100 years. Like the Colt 1911, the Remington 1911 is single action only, and has a grip safety and a manually operated thumb safety; it also has a Colt Series 80 style firing pin safety.

References

  1. Johnston, Gary Paul. Shooting Times review of the Kimber Custom LAPD SWAT model Archived 2007-04-27 at the Wayback Machine
  2. "Holton, Christopher. "The .45 makes a comeback during the war on terrorism", WorldTechTribune, April 5, 2004". Archived from the original on December 24, 2013. Retrieved March 21, 2007.
  3. Arnold, David W. Handguns review of the Kimber Custom LAPD SWAT model Archived 2007-02-25 at the Wayback Machine
  4. Johnston, Gary Paul. "One Good Pistol: The Kimber MCSOCOM ICQB", Military.com
  5. ""Desert Warrior, Kimber's Newest .45 ACP", Kimber press release, May 17, 2005". Archived from the original on March 7, 2008. Retrieved March 26, 2008.
  6. Johnston, Gary Paul. "Kimber's Warriors", Soldier of Fortune, September 5, 2006 Archived January 20, 2008, at the Wayback Machine
  7. Johnston, Gary Paul. "Kimber's Custom Covert", Soldier of Fortune, December 3, 2007 Archived December 13, 2007, at the Wayback Machine
  8. Wilson, Jim. "Kimber Stainless Target II .38 Super", Shooting Times Archived 2008-02-09 at the Wayback Machine